3c3
< [ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f
---
> [ 0.000000] CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7f
31c31
< [ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
---
> [ 0.000000] Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
75c75
< [ 0.000186] pid_max: default: 32768 minimum: 301
---
> [ 0.000187] pid_max: default: 32768 minimum: 301
77c77
< [ 0.000312] Mount-cache hash table entries: 512
---
> [ 0.000313] Mount-cache hash table entries: 512
81c81
< [ 0.000570] Calibrating local timer... 999.99MHz.
---
> [ 0.000572] Calibrating local timer... 999.99MHz.
85c85
< [ 0.060218] CPU1: Unknown IPI message 0x1
---
> [ 0.060217] CPU1: Unknown IPI message 0x1
89c89
< [ 0.060328] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
---
> [ 0.060327] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
91c91
< [ 0.060441] devtmpfs: initialized
---
> [ 0.060440] devtmpfs: initialized
95c95
< [ 0.061671] Serial: AMBA PL011 UART driver
---
> [ 0.061672] Serial: AMBA PL011 UART driver
97c97
< [ 0.061723] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
---
> [ 0.061724] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
99,100c99,100
< [ 0.061787] console [ttyAMA0] enabled, bootconsole disabled
< [ 0.061787] console [ttyAMA0] enabled, bootconsole disabled
---
> [ 0.061788] console [ttyAMA0] enabled, bootconsole disabled
> [ 0.061788] console [ttyAMA0] enabled, bootconsole disabled
102,120c102,120
< [ 0.063691] bio: create slab <bio-0> at 0
< [ 0.064011] SCSI subsystem initialized
< [ 0.064128] libata version 3.00 loaded.
< [ 0.064379] Switching to clocksource timer3
< [ 0.067740] NET: Registered protocol family 2
< [ 0.067809] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
< [ 0.067962] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.068029] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.068089] TCP: Hash tables configured (established 4096 bind 4096)
< [ 0.068127] TCP reno registered
< [ 0.068149] UDP hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.068190] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.068294] NET: Registered protocol family 1
< [ 0.068796] msgmni has been set to 244
< [ 0.068827] io scheduler noop registered (default)
< [ 0.070213] CLCD: RealView hardware, XVGA display
< [ 0.102286] Console: switching to colour frame buffer device 128x48
< [ 0.107197] brd: module loaded
< [ 0.108021] loop: module loaded
---
> [ 0.063682] bio: create slab <bio-0> at 0
> [ 0.064002] SCSI subsystem initialized
> [ 0.064118] libata version 3.00 loaded.
> [ 0.064367] Switching to clocksource timer3
> [ 0.067695] NET: Registered protocol family 2
> [ 0.067761] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> [ 0.067911] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.067976] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.068035] TCP: Hash tables configured (established 4096 bind 4096)
> [ 0.068074] TCP reno registered
> [ 0.068096] UDP hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.068137] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.068241] NET: Registered protocol family 1
> [ 0.068735] msgmni has been set to 244
> [ 0.068766] io scheduler noop registered (default)
> [ 0.070183] CLCD: RealView hardware, XVGA display
> [ 0.102284] Console: switching to colour frame buffer device 128x48
> [ 0.107199] brd: module loaded
> [ 0.108026] loop: module loaded
123,127c123,127
< [ 0.108894] slram: not enough parameters.
< [ 0.109128] mousedev: PS/2 mouse device common for all mice
< [ 0.109274] TCP cubic registered
< [ 0.109295] NET: Registered protocol family 17
< [ 0.109327] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
---
> [ 0.108893] slram: not enough parameters.
> [ 0.109125] mousedev: PS/2 mouse device common for all mice
> [ 0.109271] TCP cubic registered
> [ 0.109293] NET: Registered protocol family 17
> [ 0.109324] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
131,138c131,138
< [ 0.280075] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
< [ 0.280284] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
< [ 0.280356] sd 0:0:0:0: Attached scsi generic sg0 type 0
< [ 0.280392] sd 0:0:0:0: [sda] Write Protect is off
< [ 0.280422] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
< [ 0.280479] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
< [ 0.281261] sda: sda1
< [ 0.281512] sd 0:0:0:0: [sda] Attached SCSI disk
---
> [ 0.260523] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
> [ 0.260729] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
> [ 0.260806] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 0.260837] sd 0:0:0:0: [sda] Write Protect is off
> [ 0.260841] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.260870] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 0.261661] sda: sda1
> [ 0.261910] sd 0:0:0:0: [sda] Attached SCSI disk
140,142c140,143
< [ 0.841018] VFS: Mounted root (ext2 filesystem) on device 8:1.
< [ 0.841446] devtmpfs: mounted
< [ 0.841477] Freeing init memory: 132K
---
> [ 2.299992] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
> [ 2.340794] VFS: Mounted root (ext2 filesystem) on device 8:1.
> [ 2.341220] devtmpfs: mounted
> [ 2.341252] Freeing init memory: 132K
146c147
< starting pid 333, tty '': '/etc/rc.d/rc.local'
---
> starting pid 336, tty '': '/etc/rc.d/rc.local'
148c149
< Thu Jan 1 00:00:01 UTC 1970
---
> Thu Jan 1 00:00:02 UTC 1970
150c151
< Thu Jan 1 00:00:01 UTC 1970
---
> Thu Jan 1 00:00:02 UTC 1970
< [ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f
---
> [ 0.000000] CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7f
31c31
< [ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
---
> [ 0.000000] Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
75c75
< [ 0.000186] pid_max: default: 32768 minimum: 301
---
> [ 0.000187] pid_max: default: 32768 minimum: 301
77c77
< [ 0.000312] Mount-cache hash table entries: 512
---
> [ 0.000313] Mount-cache hash table entries: 512
81c81
< [ 0.000570] Calibrating local timer... 999.99MHz.
---
> [ 0.000572] Calibrating local timer... 999.99MHz.
85c85
< [ 0.060218] CPU1: Unknown IPI message 0x1
---
> [ 0.060217] CPU1: Unknown IPI message 0x1
89c89
< [ 0.060328] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
---
> [ 0.060327] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
91c91
< [ 0.060441] devtmpfs: initialized
---
> [ 0.060440] devtmpfs: initialized
95c95
< [ 0.061671] Serial: AMBA PL011 UART driver
---
> [ 0.061672] Serial: AMBA PL011 UART driver
97c97
< [ 0.061723] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
---
> [ 0.061724] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
99,100c99,100
< [ 0.061787] console [ttyAMA0] enabled, bootconsole disabled
< [ 0.061787] console [ttyAMA0] enabled, bootconsole disabled
---
> [ 0.061788] console [ttyAMA0] enabled, bootconsole disabled
> [ 0.061788] console [ttyAMA0] enabled, bootconsole disabled
102,120c102,120
< [ 0.063691] bio: create slab <bio-0> at 0
< [ 0.064011] SCSI subsystem initialized
< [ 0.064128] libata version 3.00 loaded.
< [ 0.064379] Switching to clocksource timer3
< [ 0.067740] NET: Registered protocol family 2
< [ 0.067809] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
< [ 0.067962] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.068029] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.068089] TCP: Hash tables configured (established 4096 bind 4096)
< [ 0.068127] TCP reno registered
< [ 0.068149] UDP hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.068190] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.068294] NET: Registered protocol family 1
< [ 0.068796] msgmni has been set to 244
< [ 0.068827] io scheduler noop registered (default)
< [ 0.070213] CLCD: RealView hardware, XVGA display
< [ 0.102286] Console: switching to colour frame buffer device 128x48
< [ 0.107197] brd: module loaded
< [ 0.108021] loop: module loaded
---
> [ 0.063682] bio: create slab <bio-0> at 0
> [ 0.064002] SCSI subsystem initialized
> [ 0.064118] libata version 3.00 loaded.
> [ 0.064367] Switching to clocksource timer3
> [ 0.067695] NET: Registered protocol family 2
> [ 0.067761] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> [ 0.067911] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.067976] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.068035] TCP: Hash tables configured (established 4096 bind 4096)
> [ 0.068074] TCP reno registered
> [ 0.068096] UDP hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.068137] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.068241] NET: Registered protocol family 1
> [ 0.068735] msgmni has been set to 244
> [ 0.068766] io scheduler noop registered (default)
> [ 0.070183] CLCD: RealView hardware, XVGA display
> [ 0.102284] Console: switching to colour frame buffer device 128x48
> [ 0.107199] brd: module loaded
> [ 0.108026] loop: module loaded
123,127c123,127
< [ 0.108894] slram: not enough parameters.
< [ 0.109128] mousedev: PS/2 mouse device common for all mice
< [ 0.109274] TCP cubic registered
< [ 0.109295] NET: Registered protocol family 17
< [ 0.109327] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
---
> [ 0.108893] slram: not enough parameters.
> [ 0.109125] mousedev: PS/2 mouse device common for all mice
> [ 0.109271] TCP cubic registered
> [ 0.109293] NET: Registered protocol family 17
> [ 0.109324] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
131,138c131,138
< [ 0.280075] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
< [ 0.280284] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
< [ 0.280356] sd 0:0:0:0: Attached scsi generic sg0 type 0
< [ 0.280392] sd 0:0:0:0: [sda] Write Protect is off
< [ 0.280422] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
< [ 0.280479] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
< [ 0.281261] sda: sda1
< [ 0.281512] sd 0:0:0:0: [sda] Attached SCSI disk
---
> [ 0.260523] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
> [ 0.260729] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
> [ 0.260806] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 0.260837] sd 0:0:0:0: [sda] Write Protect is off
> [ 0.260841] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.260870] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 0.261661] sda: sda1
> [ 0.261910] sd 0:0:0:0: [sda] Attached SCSI disk
140,142c140,143
< [ 0.841018] VFS: Mounted root (ext2 filesystem) on device 8:1.
< [ 0.841446] devtmpfs: mounted
< [ 0.841477] Freeing init memory: 132K
---
> [ 2.299992] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
> [ 2.340794] VFS: Mounted root (ext2 filesystem) on device 8:1.
> [ 2.341220] devtmpfs: mounted
> [ 2.341252] Freeing init memory: 132K
146c147
< starting pid 333, tty '': '/etc/rc.d/rc.local'
---
> starting pid 336, tty '': '/etc/rc.d/rc.local'
148c149
< Thu Jan 1 00:00:01 UTC 1970
---
> Thu Jan 1 00:00:02 UTC 1970
150c151
< Thu Jan 1 00:00:01 UTC 1970
---
> Thu Jan 1 00:00:02 UTC 1970