73c73
< [ 0.000101] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
---
> [ 0.000109] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
75c75
< [ 0.000145] pid_max: default: 32768 minimum: 301
---
> [ 0.000180] pid_max: default: 32768 minimum: 301
77c77
< [ 0.000260] Mount-cache hash table entries: 512
---
> [ 0.000303] Mount-cache hash table entries: 512
79c79
< [ 0.000416] CPU: Testing write buffer coherency: ok
---
> [ 0.000464] CPU: Testing write buffer coherency: ok
81c81
< [ 0.000480] Calibrating local timer... 999.99MHz.
---
> [ 0.000542] Calibrating local timer... 999.99MHz.
83c83
< [ 0.060190] CPU1: Booted secondary processor
---
> [ 0.060192] CPU1: Booted secondary processor
85c85
< [ 0.060199] CPU1: Unknown IPI message 0x1
---
> [ 0.060201] CPU1: Unknown IPI message 0x1
87c87
< [ 0.060214] Brought up 2 CPUs
---
> [ 0.060216] Brought up 2 CPUs
89c89
< [ 0.060272] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
---
> [ 0.060310] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
91c91
< [ 0.060364] devtmpfs: initialized
---
> [ 0.060419] devtmpfs: initialized
93c93
< [ 0.061058] NET: Registered protocol family 16
---
> [ 0.061039] NET: Registered protocol family 16
95c95
< [ 0.061634] Serial: AMBA PL011 UART driver
---
> [ 0.061605] Serial: AMBA PL011 UART driver
97c97
< [ 0.061673] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
---
> [ 0.061656] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
99,100c99,100
< [ 0.061713] console [ttyAMA0] enabled, bootconsole disabled
< [ 0.061713] console [ttyAMA0] enabled, bootconsole disabled
---
> [ 0.061719] console [ttyAMA0] enabled, bootconsole disabled
> [ 0.061719] console [ttyAMA0] enabled, bootconsole disabled
102,143c102,143
< [ 0.063695] bio: create slab <bio-0> at 0
< [ 0.064011] SCSI subsystem initialized
< [ 0.064121] libata version 3.00 loaded.
< [ 0.064370] Switching to clocksource timer3
< [ 0.067889] NET: Registered protocol family 2
< [ 0.067947] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
< [ 0.068081] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.068125] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.068166] TCP: Hash tables configured (established 4096 bind 4096)
< [ 0.068189] TCP reno registered
< [ 0.068204] UDP hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.068230] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.068322] NET: Registered protocol family 1
< [ 0.068828] msgmni has been set to 244
< [ 0.068851] io scheduler noop registered (default)
< [ 0.069784] CLCD: RealView hardware, XVGA display
< [ 0.093630] Console: switching to colour frame buffer device 128x48
< [ 0.099725] brd: module loaded
< [ 0.100645] loop: module loaded
< [ 0.101128] scsi0 : pata_platform
< [ 0.101242] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
< [ 0.101544] slram: not enough parameters.
< [ 0.101784] mousedev: PS/2 mouse device common for all mice
< [ 0.101927] TCP cubic registered
< [ 0.101941] NET: Registered protocol family 17
< [ 0.101963] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
< [ 0.260335] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
< [ 0.260355] ata1.00: 1048320 sectors, multi 0: LBA
< [ 0.260375] ata1.00: configured for PIO
< [ 0.260473] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
< [ 0.260676] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
< [ 0.260754] sd 0:0:0:0: Attached scsi generic sg0 type 0
< [ 0.260771] sd 0:0:0:0: [sda] Write Protect is off
< [ 0.260774] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
< [ 0.260804] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
< [ 0.261498] sda: sda1
< [ 0.261760] sd 0:0:0:0: [sda] Attached SCSI disk
< [ 0.700236] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
< [ 2.300046] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
< [ 2.340790] VFS: Mounted root (ext2 filesystem) on device 8:1.
< [ 2.341173] devtmpfs: mounted
< [ 2.341202] Freeing init memory: 132K
---
> [ 0.063609] bio: create slab <bio-0> at 0
> [ 0.063917] SCSI subsystem initialized
> [ 0.064032] libata version 3.00 loaded.
> [ 0.064277] Switching to clocksource timer3
> [ 0.067592] NET: Registered protocol family 2
> [ 0.067657] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> [ 0.067805] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.067866] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.067921] TCP: Hash tables configured (established 4096 bind 4096)
> [ 0.067959] TCP reno registered
> [ 0.067981] UDP hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.068021] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.068124] NET: Registered protocol family 1
> [ 0.068612] msgmni has been set to 244
> [ 0.068642] io scheduler noop registered (default)
> [ 0.069876] CLCD: RealView hardware, XVGA display
> [ 0.092587] Console: switching to colour frame buffer device 128x48
> [ 0.097616] brd: module loaded
> [ 0.098454] loop: module loaded
> [ 0.098896] scsi0 : pata_platform
> [ 0.099010] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
> [ 0.099317] slram: not enough parameters.
> [ 0.099552] mousedev: PS/2 mouse device common for all mice
> [ 0.099698] TCP cubic registered
> [ 0.099719] NET: Registered protocol family 17
> [ 0.099751] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
> [ 0.250342] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
> [ 0.250375] ata1.00: 1048320 sectors, multi 0: LBA
> [ 0.250406] ata1.00: configured for PIO
> [ 0.250504] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
> [ 0.250710] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
> [ 0.250790] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 0.250819] sd 0:0:0:0: [sda] Write Protect is off
> [ 0.250822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.250850] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 0.251633] sda: sda1
> [ 0.251883] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 0.690238] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
> [ 2.290058] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
> [ 2.330860] VFS: Mounted root (ext2 filesystem) on device 8:1.
> [ 2.331284] devtmpfs: mounted
> [ 2.331315] Freeing init memory: 132K
< [ 0.000101] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
---
> [ 0.000109] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
75c75
< [ 0.000145] pid_max: default: 32768 minimum: 301
---
> [ 0.000180] pid_max: default: 32768 minimum: 301
77c77
< [ 0.000260] Mount-cache hash table entries: 512
---
> [ 0.000303] Mount-cache hash table entries: 512
79c79
< [ 0.000416] CPU: Testing write buffer coherency: ok
---
> [ 0.000464] CPU: Testing write buffer coherency: ok
81c81
< [ 0.000480] Calibrating local timer... 999.99MHz.
---
> [ 0.000542] Calibrating local timer... 999.99MHz.
83c83
< [ 0.060190] CPU1: Booted secondary processor
---
> [ 0.060192] CPU1: Booted secondary processor
85c85
< [ 0.060199] CPU1: Unknown IPI message 0x1
---
> [ 0.060201] CPU1: Unknown IPI message 0x1
87c87
< [ 0.060214] Brought up 2 CPUs
---
> [ 0.060216] Brought up 2 CPUs
89c89
< [ 0.060272] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
---
> [ 0.060310] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
91c91
< [ 0.060364] devtmpfs: initialized
---
> [ 0.060419] devtmpfs: initialized
93c93
< [ 0.061058] NET: Registered protocol family 16
---
> [ 0.061039] NET: Registered protocol family 16
95c95
< [ 0.061634] Serial: AMBA PL011 UART driver
---
> [ 0.061605] Serial: AMBA PL011 UART driver
97c97
< [ 0.061673] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
---
> [ 0.061656] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
99,100c99,100
< [ 0.061713] console [ttyAMA0] enabled, bootconsole disabled
< [ 0.061713] console [ttyAMA0] enabled, bootconsole disabled
---
> [ 0.061719] console [ttyAMA0] enabled, bootconsole disabled
> [ 0.061719] console [ttyAMA0] enabled, bootconsole disabled
102,143c102,143
< [ 0.063695] bio: create slab <bio-0> at 0
< [ 0.064011] SCSI subsystem initialized
< [ 0.064121] libata version 3.00 loaded.
< [ 0.064370] Switching to clocksource timer3
< [ 0.067889] NET: Registered protocol family 2
< [ 0.067947] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
< [ 0.068081] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.068125] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.068166] TCP: Hash tables configured (established 4096 bind 4096)
< [ 0.068189] TCP reno registered
< [ 0.068204] UDP hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.068230] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.068322] NET: Registered protocol family 1
< [ 0.068828] msgmni has been set to 244
< [ 0.068851] io scheduler noop registered (default)
< [ 0.069784] CLCD: RealView hardware, XVGA display
< [ 0.093630] Console: switching to colour frame buffer device 128x48
< [ 0.099725] brd: module loaded
< [ 0.100645] loop: module loaded
< [ 0.101128] scsi0 : pata_platform
< [ 0.101242] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
< [ 0.101544] slram: not enough parameters.
< [ 0.101784] mousedev: PS/2 mouse device common for all mice
< [ 0.101927] TCP cubic registered
< [ 0.101941] NET: Registered protocol family 17
< [ 0.101963] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
< [ 0.260335] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
< [ 0.260355] ata1.00: 1048320 sectors, multi 0: LBA
< [ 0.260375] ata1.00: configured for PIO
< [ 0.260473] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
< [ 0.260676] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
< [ 0.260754] sd 0:0:0:0: Attached scsi generic sg0 type 0
< [ 0.260771] sd 0:0:0:0: [sda] Write Protect is off
< [ 0.260774] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
< [ 0.260804] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
< [ 0.261498] sda: sda1
< [ 0.261760] sd 0:0:0:0: [sda] Attached SCSI disk
< [ 0.700236] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
< [ 2.300046] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
< [ 2.340790] VFS: Mounted root (ext2 filesystem) on device 8:1.
< [ 2.341173] devtmpfs: mounted
< [ 2.341202] Freeing init memory: 132K
---
> [ 0.063609] bio: create slab <bio-0> at 0
> [ 0.063917] SCSI subsystem initialized
> [ 0.064032] libata version 3.00 loaded.
> [ 0.064277] Switching to clocksource timer3
> [ 0.067592] NET: Registered protocol family 2
> [ 0.067657] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> [ 0.067805] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.067866] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.067921] TCP: Hash tables configured (established 4096 bind 4096)
> [ 0.067959] TCP reno registered
> [ 0.067981] UDP hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.068021] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.068124] NET: Registered protocol family 1
> [ 0.068612] msgmni has been set to 244
> [ 0.068642] io scheduler noop registered (default)
> [ 0.069876] CLCD: RealView hardware, XVGA display
> [ 0.092587] Console: switching to colour frame buffer device 128x48
> [ 0.097616] brd: module loaded
> [ 0.098454] loop: module loaded
> [ 0.098896] scsi0 : pata_platform
> [ 0.099010] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
> [ 0.099317] slram: not enough parameters.
> [ 0.099552] mousedev: PS/2 mouse device common for all mice
> [ 0.099698] TCP cubic registered
> [ 0.099719] NET: Registered protocol family 17
> [ 0.099751] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
> [ 0.250342] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
> [ 0.250375] ata1.00: 1048320 sectors, multi 0: LBA
> [ 0.250406] ata1.00: configured for PIO
> [ 0.250504] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
> [ 0.250710] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
> [ 0.250790] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 0.250819] sd 0:0:0:0: [sda] Write Protect is off
> [ 0.250822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.250850] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 0.251633] sda: sda1
> [ 0.251883] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 0.690238] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
> [ 2.290058] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
> [ 2.330860] VFS: Mounted root (ext2 filesystem) on device 8:1.
> [ 2.331284] devtmpfs: mounted
> [ 2.331315] Freeing init memory: 132K