1[ 0.000000] Linux version 2.6.38.8-gem5 (saidi@zeep) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 SMP Mon Aug 15 21:18:38 EDT 2011
2
3[ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f
4
5[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
6
7[ 0.000000] Machine: ARM-RealView PBX
8
9[ 0.000000] Ignoring unrecognised tag 0x00000000
10
11[ 0.000000] bootconsole [earlycon0] enabled
12
13[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
14
15[ 0.000000] On node 0 totalpages: 32768
16
17[ 0.000000] DMA zone: 256 pages used for memmap
18
19[ 0.000000] DMA zone: 0 pages reserved
20
21[ 0.000000] DMA zone: 32512 pages, LIFO batch:7
22
23[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0556000 s6272 r8192 d14208 u32768
24
25[ 0.000000] pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096
26
27[ 0.000000] pcpu-alloc: [0] 0 [0] 1
28
29[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
30
31[ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
32
33[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
34
35[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
36
37[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
38
39[ 0.000000] Memory: 128MB = 128MB total
40
41[ 0.000000] Memory: 125376k/125376k available, 5696k reserved, 0K highmem
42
43[ 0.000000] Virtual kernel memory layout:
44
45[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
46
47[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
48
49[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
50
51[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
52
53[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
54
55[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
56
57[ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB)
58
59[ 0.000000] .text : 0xc0029000 - 0xc031c044 (3021 kB)
60
61[ 0.000000] .data : 0xc031e000 - 0xc0336b40 ( 99 kB)
62
63[ 0.000000] Hierarchical RCU implementation.
64
65[ 0.000000] RCU-based detection of stalled CPUs is disabled.
66
67[ 0.000000] NR_IRQS:128
68
69[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
70
71[ 0.000000] Console: colour dummy device 80x30
72
| 1[ 0.000000] Linux version 2.6.38.8-gem5 (saidi@zeep) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 SMP Mon Aug 15 21:18:38 EDT 2011
2
3[ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f
4
5[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
6
7[ 0.000000] Machine: ARM-RealView PBX
8
9[ 0.000000] Ignoring unrecognised tag 0x00000000
10
11[ 0.000000] bootconsole [earlycon0] enabled
12
13[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
14
15[ 0.000000] On node 0 totalpages: 32768
16
17[ 0.000000] DMA zone: 256 pages used for memmap
18
19[ 0.000000] DMA zone: 0 pages reserved
20
21[ 0.000000] DMA zone: 32512 pages, LIFO batch:7
22
23[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0556000 s6272 r8192 d14208 u32768
24
25[ 0.000000] pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096
26
27[ 0.000000] pcpu-alloc: [0] 0 [0] 1
28
29[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
30
31[ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
32
33[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
34
35[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
36
37[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
38
39[ 0.000000] Memory: 128MB = 128MB total
40
41[ 0.000000] Memory: 125376k/125376k available, 5696k reserved, 0K highmem
42
43[ 0.000000] Virtual kernel memory layout:
44
45[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
46
47[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
48
49[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
50
51[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
52
53[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
54
55[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
56
57[ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB)
58
59[ 0.000000] .text : 0xc0029000 - 0xc031c044 (3021 kB)
60
61[ 0.000000] .data : 0xc031e000 - 0xc0336b40 ( 99 kB)
62
63[ 0.000000] Hierarchical RCU implementation.
64
65[ 0.000000] RCU-based detection of stalled CPUs is disabled.
66
67[ 0.000000] NR_IRQS:128
68
69[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
70
71[ 0.000000] Console: colour dummy device 80x30
72
|
73[ 0.000101] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
| 73[ 0.000109] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
|
74
| 74
|
75[ 0.000145] pid_max: default: 32768 minimum: 301
| 75[ 0.000180] pid_max: default: 32768 minimum: 301
|
76
| 76
|
77[ 0.000260] Mount-cache hash table entries: 512
| 77[ 0.000303] Mount-cache hash table entries: 512
|
78
| 78
|
79[ 0.000416] CPU: Testing write buffer coherency: ok
| 79[ 0.000464] CPU: Testing write buffer coherency: ok
|
80
| 80
|
81[ 0.000480] Calibrating local timer... 999.99MHz.
| 81[ 0.000542] Calibrating local timer... 999.99MHz.
|
82
| 82
|
83[ 0.060190] CPU1: Booted secondary processor
| 83[ 0.060192] CPU1: Booted secondary processor
|
84
| 84
|
85[ 0.060199] CPU1: Unknown IPI message 0x1
| 85[ 0.060201] CPU1: Unknown IPI message 0x1
|
86
| 86
|
87[ 0.060214] Brought up 2 CPUs
| 87[ 0.060216] Brought up 2 CPUs
|
88
| 88
|
89[ 0.060272] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
| 89[ 0.060310] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
|
90
| 90
|
91[ 0.060364] devtmpfs: initialized
| 91[ 0.060419] devtmpfs: initialized
|
92
| 92
|
93[ 0.061058] NET: Registered protocol family 16
| 93[ 0.061039] NET: Registered protocol family 16
|
94
| 94
|
95[ 0.061634] Serial: AMBA PL011 UART driver
| 95[ 0.061605] Serial: AMBA PL011 UART driver
|
96
| 96
|
97[ 0.061673] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
| 97[ 0.061656] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
|
98
| 98
|
99[ 0.061713] console [ttyAMA0] enabled, bootconsole disabled
100[ 0.061713] console [ttyAMA0] enabled, bootconsole disabled
| 99[ 0.061719] console [ttyAMA0] enabled, bootconsole disabled
100[ 0.061719] console [ttyAMA0] enabled, bootconsole disabled
|
101
| 101
|
102[ 0.063695] bio: create slab <bio-0> at 0
103[ 0.064011] SCSI subsystem initialized
104[ 0.064121] libata version 3.00 loaded.
105[ 0.064370] Switching to clocksource timer3
106[ 0.067889] NET: Registered protocol family 2
107[ 0.067947] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
108[ 0.068081] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
109[ 0.068125] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
110[ 0.068166] TCP: Hash tables configured (established 4096 bind 4096)
111[ 0.068189] TCP reno registered
112[ 0.068204] UDP hash table entries: 128 (order: 0, 4096 bytes)
113[ 0.068230] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
114[ 0.068322] NET: Registered protocol family 1
115[ 0.068828] msgmni has been set to 244
116[ 0.068851] io scheduler noop registered (default)
117[ 0.069784] CLCD: RealView hardware, XVGA display
118[ 0.093630] Console: switching to colour frame buffer device 128x48
119[ 0.099725] brd: module loaded
120[ 0.100645] loop: module loaded
121[ 0.101128] scsi0 : pata_platform
122[ 0.101242] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
123[ 0.101544] slram: not enough parameters.
124[ 0.101784] mousedev: PS/2 mouse device common for all mice
125[ 0.101927] TCP cubic registered
126[ 0.101941] NET: Registered protocol family 17
127[ 0.101963] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
128 [ 0.260335] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
129[ 0.260355] ata1.00: 1048320 sectors, multi 0: LBA
130[ 0.260375] ata1.00: configured for PIO
131[ 0.260473] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
132[ 0.260676] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
133[ 0.260754] sd 0:0:0:0: Attached scsi generic sg0 type 0
134[ 0.260771] sd 0:0:0:0: [sda] Write Protect is off
135[ 0.260774] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
136[ 0.260804] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
137[ 0.261498] sda: sda1
138[ 0.261760] sd 0:0:0:0: [sda] Attached SCSI disk
139[ 0.700236] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
140[ 2.300046] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
141[ 2.340790] VFS: Mounted root (ext2 filesystem) on device 8:1.
142[ 2.341173] devtmpfs: mounted
143[ 2.341202] Freeing init memory: 132K
| 102[ 0.063609] bio: create slab <bio-0> at 0
103[ 0.063917] SCSI subsystem initialized
104[ 0.064032] libata version 3.00 loaded.
105[ 0.064277] Switching to clocksource timer3
106[ 0.067592] NET: Registered protocol family 2
107[ 0.067657] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
108[ 0.067805] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
109[ 0.067866] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
110[ 0.067921] TCP: Hash tables configured (established 4096 bind 4096)
111[ 0.067959] TCP reno registered
112[ 0.067981] UDP hash table entries: 128 (order: 0, 4096 bytes)
113[ 0.068021] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
114[ 0.068124] NET: Registered protocol family 1
115[ 0.068612] msgmni has been set to 244
116[ 0.068642] io scheduler noop registered (default)
117[ 0.069876] CLCD: RealView hardware, XVGA display
118[ 0.092587] Console: switching to colour frame buffer device 128x48
119[ 0.097616] brd: module loaded
120[ 0.098454] loop: module loaded
121[ 0.098896] scsi0 : pata_platform
122[ 0.099010] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
123[ 0.099317] slram: not enough parameters.
124[ 0.099552] mousedev: PS/2 mouse device common for all mice
125[ 0.099698] TCP cubic registered
126[ 0.099719] NET: Registered protocol family 17
127[ 0.099751] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
128 [ 0.250342] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
129[ 0.250375] ata1.00: 1048320 sectors, multi 0: LBA
130[ 0.250406] ata1.00: configured for PIO
131[ 0.250504] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
132[ 0.250710] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
133[ 0.250790] sd 0:0:0:0: Attached scsi generic sg0 type 0
134[ 0.250819] sd 0:0:0:0: [sda] Write Protect is off
135[ 0.250822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
136[ 0.250850] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
137[ 0.251633] sda: sda1
138[ 0.251883] sd 0:0:0:0: [sda] Attached SCSI disk
139[ 0.690238] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
140[ 2.290058] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
141[ 2.330860] VFS: Mounted root (ext2 filesystem) on device 8:1.
142[ 2.331284] devtmpfs: mounted
143[ 2.331315] Freeing init memory: 132K
|
144
145init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST)
146
147starting pid 336, tty '': '/etc/rc.d/rc.local'
148warning: can't open /etc/mtab: No such file or directory
149Thu Jan 1 00:00:02 UTC 1970
150S: devpts
151Thu Jan 1 00:00:02 UTC 1970
| 144
145init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST)
146
147starting pid 336, tty '': '/etc/rc.d/rc.local'
148warning: can't open /etc/mtab: No such file or directory
149Thu Jan 1 00:00:02 UTC 1970
150S: devpts
151Thu Jan 1 00:00:02 UTC 1970
|