1# -*- mode:python -*- 2 3# Copyright (c) 2004-2006 The Regents of The University of Michigan 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions are 8# met: redistributions of source code must retain the above copyright 9# notice, this list of conditions and the following disclaimer; 10# redistributions in binary form must reproduce the above copyright 11# notice, this list of conditions and the following disclaimer in the 12# documentation and/or other materials provided with the distribution; 13# neither the name of the copyright holders nor the names of its 14# contributors may be used to endorse or promote products derived from 15# this software without specific prior written permission. 16# 17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28# 29# Authors: Steve Reinhardt 30# Kevin Lim 31 32import os, signal 33import sys, time 34import glob 35from SCons.Script.SConscript import SConsEnvironment 36 37Import('env') 38 39env['DIFFOUT'] = File('diff-out') 40 41# get the termcap from the environment 42termcap = env['TERMCAP'] 43 44# Dict that accumulates lists of tests by category (quick, medium, long) 45env.Tests = {} 46 47def contents(node): 48 return file(str(node)).read() 49 50# functions to parse return value from scons Execute()... not the same 51# as wait() etc., so python built-in os funcs don't work. 52def signaled(status): 53 return (status & 0x80) != 0; 54 55def signum(status): 56 return (status & 0x7f); 57 58# List of signals that indicate that we should retry the test rather 59# than consider it failed. 60retry_signals = (signal.SIGTERM, signal.SIGKILL, signal.SIGINT, 61 signal.SIGQUIT, signal.SIGHUP) 62 63# regular expressions of lines to ignore when diffing outputs 64output_ignore_regexes = ( 65 '^command line:', # for stdout file 66 '^gem5 compiled ', # for stderr file 67 '^gem5 started ', # for stderr file 68 '^gem5 executing on ', # for stderr file 69 '^Simulation complete at', # for stderr file 70 '^Listening for', # for stderr file 71 'listening for remote gdb', # for stderr file 72 ) 73 74output_ignore_args = ' '.join(["-I '"+s+"'" for s in output_ignore_regexes]) 75 76output_ignore_args += ' --exclude=stats.txt --exclude=outdiff' 77 78def run_test(target, source, env): 79 """Check output from running test. 80 81 Targets are as follows: 82 target[0] : status 83 84 Sources are:
| 1# -*- mode:python -*- 2 3# Copyright (c) 2004-2006 The Regents of The University of Michigan 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions are 8# met: redistributions of source code must retain the above copyright 9# notice, this list of conditions and the following disclaimer; 10# redistributions in binary form must reproduce the above copyright 11# notice, this list of conditions and the following disclaimer in the 12# documentation and/or other materials provided with the distribution; 13# neither the name of the copyright holders nor the names of its 14# contributors may be used to endorse or promote products derived from 15# this software without specific prior written permission. 16# 17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28# 29# Authors: Steve Reinhardt 30# Kevin Lim 31 32import os, signal 33import sys, time 34import glob 35from SCons.Script.SConscript import SConsEnvironment 36 37Import('env') 38 39env['DIFFOUT'] = File('diff-out') 40 41# get the termcap from the environment 42termcap = env['TERMCAP'] 43 44# Dict that accumulates lists of tests by category (quick, medium, long) 45env.Tests = {} 46 47def contents(node): 48 return file(str(node)).read() 49 50# functions to parse return value from scons Execute()... not the same 51# as wait() etc., so python built-in os funcs don't work. 52def signaled(status): 53 return (status & 0x80) != 0; 54 55def signum(status): 56 return (status & 0x7f); 57 58# List of signals that indicate that we should retry the test rather 59# than consider it failed. 60retry_signals = (signal.SIGTERM, signal.SIGKILL, signal.SIGINT, 61 signal.SIGQUIT, signal.SIGHUP) 62 63# regular expressions of lines to ignore when diffing outputs 64output_ignore_regexes = ( 65 '^command line:', # for stdout file 66 '^gem5 compiled ', # for stderr file 67 '^gem5 started ', # for stderr file 68 '^gem5 executing on ', # for stderr file 69 '^Simulation complete at', # for stderr file 70 '^Listening for', # for stderr file 71 'listening for remote gdb', # for stderr file 72 ) 73 74output_ignore_args = ' '.join(["-I '"+s+"'" for s in output_ignore_regexes]) 75 76output_ignore_args += ' --exclude=stats.txt --exclude=outdiff' 77 78def run_test(target, source, env): 79 """Check output from running test. 80 81 Targets are as follows: 82 target[0] : status 83 84 Sources are:
|
85 source[0] : M5 binary
| 85 source[0] : gem5 binary
|
86 source[1] : tests/run.py script 87 source[2] : reference stats file 88 89 """ 90 # make sure target files are all gone 91 for t in target: 92 if os.path.exists(t.abspath): 93 env.Execute(Delete(t.abspath)) 94 95 tgt_dir = os.path.dirname(str(target[0])) 96 97 # Base command for running test. We mess around with indirectly 98 # referring to files via SOURCES and TARGETS so that scons can mess 99 # with paths all it wants to and we still get the right files. 100 cmd = '${SOURCES[0]} -d %s -re ${SOURCES[1]} %s' % (tgt_dir, tgt_dir) 101 102 # Prefix test run with batch job submission command if appropriate. 103 # Batch command also supports timeout arg (in seconds, not minutes). 104 timeout = 15 * 60 # used to be a param, probably should be again 105 if env['BATCH']: 106 cmd = '%s -t %d %s' % (env['BATCH_CMD'], timeout, cmd) 107
| 86 source[1] : tests/run.py script 87 source[2] : reference stats file 88 89 """ 90 # make sure target files are all gone 91 for t in target: 92 if os.path.exists(t.abspath): 93 env.Execute(Delete(t.abspath)) 94 95 tgt_dir = os.path.dirname(str(target[0])) 96 97 # Base command for running test. We mess around with indirectly 98 # referring to files via SOURCES and TARGETS so that scons can mess 99 # with paths all it wants to and we still get the right files. 100 cmd = '${SOURCES[0]} -d %s -re ${SOURCES[1]} %s' % (tgt_dir, tgt_dir) 101 102 # Prefix test run with batch job submission command if appropriate. 103 # Batch command also supports timeout arg (in seconds, not minutes). 104 timeout = 15 * 60 # used to be a param, probably should be again 105 if env['BATCH']: 106 cmd = '%s -t %d %s' % (env['BATCH_CMD'], timeout, cmd) 107
|
| 108 # Create a default value for the status string, changed as needed 109 # based on the status. 110 status_str = "passed." 111
|
108 pre_exec_time = time.time() 109 status = env.Execute(env.subst(cmd, target=target, source=source)) 110 if status == 0:
| 112 pre_exec_time = time.time() 113 status = env.Execute(env.subst(cmd, target=target, source=source)) 114 if status == 0:
|
111 # M5 terminated normally.
| 115 # gem5 terminated normally.
|
112 # Run diff on output & ref directories to find differences. 113 # Exclude the stats file since we will use diff-out on that. 114 115 # NFS file systems can be annoying and not have updated yet 116 # wait until we see the file modified 117 statsdiff = os.path.join(tgt_dir, 'statsdiff') 118 m_time = 0 119 nap = 0 120 while m_time < pre_exec_time and nap < 10: 121 try: 122 m_time = os.stat(statsdiff).st_mtime 123 except OSError: 124 pass 125 time.sleep(1) 126 nap += 1 127 128 outdiff = os.path.join(tgt_dir, 'outdiff') 129 # tack 'true' on the end so scons doesn't report diff's 130 # non-zero exit code as a build error 131 diffcmd = 'diff -ubrs %s ${SOURCES[2].dir} %s > %s; true' \ 132 % (output_ignore_args, tgt_dir, outdiff) 133 env.Execute(env.subst(diffcmd, target=target, source=source)) 134 print "===== Output differences =====" 135 print contents(outdiff) 136 # Run diff-out on stats.txt file 137 diffcmd = '$DIFFOUT ${SOURCES[2]} %s > %s' \ 138 % (os.path.join(tgt_dir, 'stats.txt'), statsdiff) 139 diffcmd = env.subst(diffcmd, target=target, source=source)
| 116 # Run diff on output & ref directories to find differences. 117 # Exclude the stats file since we will use diff-out on that. 118 119 # NFS file systems can be annoying and not have updated yet 120 # wait until we see the file modified 121 statsdiff = os.path.join(tgt_dir, 'statsdiff') 122 m_time = 0 123 nap = 0 124 while m_time < pre_exec_time and nap < 10: 125 try: 126 m_time = os.stat(statsdiff).st_mtime 127 except OSError: 128 pass 129 time.sleep(1) 130 nap += 1 131 132 outdiff = os.path.join(tgt_dir, 'outdiff') 133 # tack 'true' on the end so scons doesn't report diff's 134 # non-zero exit code as a build error 135 diffcmd = 'diff -ubrs %s ${SOURCES[2].dir} %s > %s; true' \ 136 % (output_ignore_args, tgt_dir, outdiff) 137 env.Execute(env.subst(diffcmd, target=target, source=source)) 138 print "===== Output differences =====" 139 print contents(outdiff) 140 # Run diff-out on stats.txt file 141 diffcmd = '$DIFFOUT ${SOURCES[2]} %s > %s' \ 142 % (os.path.join(tgt_dir, 'stats.txt'), statsdiff) 143 diffcmd = env.subst(diffcmd, target=target, source=source)
|
140 status = env.Execute(diffcmd, strfunction=None)
| 144 diff_status = env.Execute(diffcmd, strfunction=None) 145 # If there is a difference, change the status string to say so 146 if diff_status != 0: 147 status_str = "CHANGED!"
|
141 print "===== Statistics differences =====" 142 print contents(statsdiff) 143
| 148 print "===== Statistics differences =====" 149 print contents(statsdiff) 150
|
144 else: # m5 exit status != 0 145 # M5 did not terminate properly, so no need to check the output
| 151 else: # gem5 exit status != 0 152 # Consider it a failed test unless the exit status is 2 153 status_str = "FAILED!" 154 # gem5 did not terminate properly, so no need to check the output
|
146 if signaled(status):
| 155 if signaled(status):
|
147 print 'M5 terminated with signal', signum(status)
| 156 print 'gem5 terminated with signal', signum(status)
|
148 if signum(status) in retry_signals: 149 # Consider the test incomplete; don't create a 'status' output. 150 # Hand the return status to scons and let scons decide what 151 # to do about it (typically terminate unless run with -k). 152 return status 153 elif status == 2:
| 157 if signum(status) in retry_signals: 158 # Consider the test incomplete; don't create a 'status' output. 159 # Hand the return status to scons and let scons decide what 160 # to do about it (typically terminate unless run with -k). 161 return status 162 elif status == 2:
|
154 # The test was skipped 155 pass
| 163 # The test was skipped, change the status string to say so 164 status_str = "skipped."
|
156 else:
| 165 else:
|
157 print 'M5 exited with non-zero status', status
| 166 print 'gem5 exited with non-zero status', status
|
158 # complete but failed execution (call to exit() with non-zero 159 # status, SIGABORT due to assertion failure, etc.)... fall through 160 # and generate FAILED status as if output comparison had failed 161
| 167 # complete but failed execution (call to exit() with non-zero 168 # status, SIGABORT due to assertion failure, etc.)... fall through 169 # and generate FAILED status as if output comparison had failed 170
|
162 # Generate status file contents based on exit status of m5 or diff-out 163 if status == 0: 164 status_str = "passed." 165 elif status == 2: 166 status_str = "skipped." 167 else: 168 status_str = "FAILED!"
| 171 # Generate status file contents based on exit status of gem5 and diff-out
|
169 f = file(str(target[0]), 'w') 170 print >>f, tgt_dir, status_str 171 f.close() 172 # done 173 return 0 174 175def run_test_string(target, source, env): 176 return env.subst("Running test in ${TARGETS[0].dir}.", 177 target=target, source=source) 178 179testAction = env.Action(run_test, run_test_string) 180 181def print_test(target, source, env): 182 # print the status with colours to make it easier to see what 183 # passed and what failed 184 line = contents(source[0]) 185 186 # split the line to words and get the last one 187 words = line.split() 188 status = words[-1] 189 190 # if the test failed make it red, if it passed make it green, and 191 # skip the punctuation 192 if status == "FAILED!": 193 status = termcap.Red + status[:-1] + termcap.Normal + status[-1]
| 172 f = file(str(target[0]), 'w') 173 print >>f, tgt_dir, status_str 174 f.close() 175 # done 176 return 0 177 178def run_test_string(target, source, env): 179 return env.subst("Running test in ${TARGETS[0].dir}.", 180 target=target, source=source) 181 182testAction = env.Action(run_test, run_test_string) 183 184def print_test(target, source, env): 185 # print the status with colours to make it easier to see what 186 # passed and what failed 187 line = contents(source[0]) 188 189 # split the line to words and get the last one 190 words = line.split() 191 status = words[-1] 192 193 # if the test failed make it red, if it passed make it green, and 194 # skip the punctuation 195 if status == "FAILED!": 196 status = termcap.Red + status[:-1] + termcap.Normal + status[-1]
|
| 197 elif status == "CHANGED!": 198 status = termcap.Yellow + status[:-1] + termcap.Normal + status[-1]
|
194 elif status == "passed.": 195 status = termcap.Green + status[:-1] + termcap.Normal + status[-1] 196 elif status == "skipped.":
| 199 elif status == "passed.": 200 status = termcap.Green + status[:-1] + termcap.Normal + status[-1] 201 elif status == "skipped.":
|
197 status = termcap.Yellow + status[:-1] + termcap.Normal + status[-1]
| 202 status = termcap.Cyan + status[:-1] + termcap.Normal + status[-1]
|
198 199 # put it back in the list and join with space 200 words[-1] = status 201 line = " ".join(words) 202 203 print '***** ' + line 204 return 0 205 206printAction = env.Action(print_test, strfunction = None) 207 208# Static vars for update_test: 209# - long-winded message about ignored sources 210ignore_msg = ''' 211Note: The following file(s) will not be copied. New non-standard 212 output files must be copied manually once before --update-ref will 213 recognize them as outputs. Otherwise they are assumed to be 214 inputs and are ignored. 215''' 216# - reference files always needed 217needed_files = set(['simout', 'simerr', 'stats.txt', 'config.ini']) 218# - source files we always want to ignore 219known_ignores = set(['status', 'outdiff', 'statsdiff']) 220 221def update_test(target, source, env): 222 """Update reference test outputs. 223 224 Target is phony. First two sources are the ref & new stats.txt file 225 files, respectively. We actually copy everything in the 226 respective directories except the status & diff output files. 227 228 """ 229 dest_dir = str(source[0].get_dir()) 230 src_dir = str(source[1].get_dir()) 231 dest_files = set(os.listdir(dest_dir)) 232 src_files = set(os.listdir(src_dir)) 233 # Copy all of the required files plus any existing dest files. 234 wanted_files = needed_files | dest_files 235 missing_files = wanted_files - src_files 236 if len(missing_files) > 0: 237 print " WARNING: the following file(s) are missing " \ 238 "and will not be updated:" 239 print " ", " ,".join(missing_files) 240 copy_files = wanted_files - missing_files 241 warn_ignored_files = (src_files - copy_files) - known_ignores 242 if len(warn_ignored_files) > 0: 243 print ignore_msg, 244 print " ", ", ".join(warn_ignored_files) 245 for f in copy_files: 246 if f in dest_files: 247 print " Replacing file", f 248 dest_files.remove(f) 249 else: 250 print " Creating new file", f 251 copyAction = Copy(os.path.join(dest_dir, f), os.path.join(src_dir, f)) 252 copyAction.strfunction = None 253 env.Execute(copyAction) 254 return 0 255 256def update_test_string(target, source, env): 257 return env.subst("Updating ${SOURCES[0].dir} from ${SOURCES[1].dir}", 258 target=target, source=source) 259 260updateAction = env.Action(update_test, update_test_string) 261 262def test_builder(env, ref_dir): 263 """Define a test.""" 264 265 (category, mode, name, _ref, isa, opsys, config) = ref_dir.split('/') 266 assert(_ref == 'ref') 267 268 # target path (where test output goes) is the same except without 269 # the 'ref' component 270 tgt_dir = os.path.join(category, mode, name, isa, opsys, config) 271 272 # prepend file name with tgt_dir 273 def tgt(f): 274 return os.path.join(tgt_dir, f) 275 276 ref_stats = os.path.join(ref_dir, 'stats.txt') 277 new_stats = tgt('stats.txt') 278 status_file = tgt('status') 279 280 env.Command([status_file], 281 [env.M5Binary, 'run.py', ref_stats], 282 testAction) 283 284 # phony target to echo status 285 if GetOption('update_ref'): 286 p = env.Command(tgt('_update'), 287 [ref_stats, new_stats, status_file], 288 updateAction) 289 else: 290 p = env.Command(tgt('_print'), [status_file], printAction) 291 292 env.AlwaysBuild(p) 293 294 295# Figure out applicable configs based on build type 296configs = [] 297if env['TARGET_ISA'] == 'alpha': 298 configs += ['tsunami-simple-atomic', 299 'tsunami-simple-timing', 300 'tsunami-simple-atomic-dual', 301 'tsunami-simple-timing-dual', 302 'twosys-tsunami-simple-atomic', 303 'tsunami-o3', 'tsunami-o3-dual', 304 'tsunami-inorder', 305 'tsunami-switcheroo-full'] 306if env['TARGET_ISA'] == 'sparc': 307 configs += ['t1000-simple-atomic', 308 't1000-simple-timing'] 309if env['TARGET_ISA'] == 'arm': 310 configs += ['simple-atomic-dummychecker', 311 'o3-timing-checker', 312 'realview-simple-atomic', 313 'realview-simple-atomic-dual', 314 'realview-simple-timing', 315 'realview-simple-timing-dual', 316 'realview-o3', 317 'realview-o3-checker', 318 'realview-o3-dual', 319 'realview-switcheroo-atomic', 320 'realview-switcheroo-timing', 321 'realview-switcheroo-o3', 322 'realview-switcheroo-full'] 323if env['TARGET_ISA'] == 'x86': 324 configs += ['pc-simple-atomic', 325 'pc-simple-timing', 326 'pc-o3-timing', 327 'pc-switcheroo-full'] 328 329configs += ['simple-atomic', 'simple-timing', 'o3-timing', 'memtest', 330 'simple-atomic-mp', 'simple-timing-mp', 'o3-timing-mp', 331 'inorder-timing', 'rubytest', 'tgen-simple-mem', 332 'tgen-simple-dram'] 333 334if env['PROTOCOL'] != 'None': 335 if env['PROTOCOL'] == 'MI_example': 336 configs += [c + "-ruby" for c in configs] 337 else: 338 configs = [c + "-ruby-" + env['PROTOCOL'] for c in configs] 339 340cwd = os.getcwd() 341os.chdir(str(Dir('.').srcdir)) 342for config in configs: 343 dirs = glob.glob('*/*/*/ref/%s/*/%s' % (env['TARGET_ISA'], config)) 344 for d in dirs: 345 if not os.path.exists(os.path.join(d, 'skip')): 346 test_builder(env, d) 347os.chdir(cwd)
| 203 204 # put it back in the list and join with space 205 words[-1] = status 206 line = " ".join(words) 207 208 print '***** ' + line 209 return 0 210 211printAction = env.Action(print_test, strfunction = None) 212 213# Static vars for update_test: 214# - long-winded message about ignored sources 215ignore_msg = ''' 216Note: The following file(s) will not be copied. New non-standard 217 output files must be copied manually once before --update-ref will 218 recognize them as outputs. Otherwise they are assumed to be 219 inputs and are ignored. 220''' 221# - reference files always needed 222needed_files = set(['simout', 'simerr', 'stats.txt', 'config.ini']) 223# - source files we always want to ignore 224known_ignores = set(['status', 'outdiff', 'statsdiff']) 225 226def update_test(target, source, env): 227 """Update reference test outputs. 228 229 Target is phony. First two sources are the ref & new stats.txt file 230 files, respectively. We actually copy everything in the 231 respective directories except the status & diff output files. 232 233 """ 234 dest_dir = str(source[0].get_dir()) 235 src_dir = str(source[1].get_dir()) 236 dest_files = set(os.listdir(dest_dir)) 237 src_files = set(os.listdir(src_dir)) 238 # Copy all of the required files plus any existing dest files. 239 wanted_files = needed_files | dest_files 240 missing_files = wanted_files - src_files 241 if len(missing_files) > 0: 242 print " WARNING: the following file(s) are missing " \ 243 "and will not be updated:" 244 print " ", " ,".join(missing_files) 245 copy_files = wanted_files - missing_files 246 warn_ignored_files = (src_files - copy_files) - known_ignores 247 if len(warn_ignored_files) > 0: 248 print ignore_msg, 249 print " ", ", ".join(warn_ignored_files) 250 for f in copy_files: 251 if f in dest_files: 252 print " Replacing file", f 253 dest_files.remove(f) 254 else: 255 print " Creating new file", f 256 copyAction = Copy(os.path.join(dest_dir, f), os.path.join(src_dir, f)) 257 copyAction.strfunction = None 258 env.Execute(copyAction) 259 return 0 260 261def update_test_string(target, source, env): 262 return env.subst("Updating ${SOURCES[0].dir} from ${SOURCES[1].dir}", 263 target=target, source=source) 264 265updateAction = env.Action(update_test, update_test_string) 266 267def test_builder(env, ref_dir): 268 """Define a test.""" 269 270 (category, mode, name, _ref, isa, opsys, config) = ref_dir.split('/') 271 assert(_ref == 'ref') 272 273 # target path (where test output goes) is the same except without 274 # the 'ref' component 275 tgt_dir = os.path.join(category, mode, name, isa, opsys, config) 276 277 # prepend file name with tgt_dir 278 def tgt(f): 279 return os.path.join(tgt_dir, f) 280 281 ref_stats = os.path.join(ref_dir, 'stats.txt') 282 new_stats = tgt('stats.txt') 283 status_file = tgt('status') 284 285 env.Command([status_file], 286 [env.M5Binary, 'run.py', ref_stats], 287 testAction) 288 289 # phony target to echo status 290 if GetOption('update_ref'): 291 p = env.Command(tgt('_update'), 292 [ref_stats, new_stats, status_file], 293 updateAction) 294 else: 295 p = env.Command(tgt('_print'), [status_file], printAction) 296 297 env.AlwaysBuild(p) 298 299 300# Figure out applicable configs based on build type 301configs = [] 302if env['TARGET_ISA'] == 'alpha': 303 configs += ['tsunami-simple-atomic', 304 'tsunami-simple-timing', 305 'tsunami-simple-atomic-dual', 306 'tsunami-simple-timing-dual', 307 'twosys-tsunami-simple-atomic', 308 'tsunami-o3', 'tsunami-o3-dual', 309 'tsunami-inorder', 310 'tsunami-switcheroo-full'] 311if env['TARGET_ISA'] == 'sparc': 312 configs += ['t1000-simple-atomic', 313 't1000-simple-timing'] 314if env['TARGET_ISA'] == 'arm': 315 configs += ['simple-atomic-dummychecker', 316 'o3-timing-checker', 317 'realview-simple-atomic', 318 'realview-simple-atomic-dual', 319 'realview-simple-timing', 320 'realview-simple-timing-dual', 321 'realview-o3', 322 'realview-o3-checker', 323 'realview-o3-dual', 324 'realview-switcheroo-atomic', 325 'realview-switcheroo-timing', 326 'realview-switcheroo-o3', 327 'realview-switcheroo-full'] 328if env['TARGET_ISA'] == 'x86': 329 configs += ['pc-simple-atomic', 330 'pc-simple-timing', 331 'pc-o3-timing', 332 'pc-switcheroo-full'] 333 334configs += ['simple-atomic', 'simple-timing', 'o3-timing', 'memtest', 335 'simple-atomic-mp', 'simple-timing-mp', 'o3-timing-mp', 336 'inorder-timing', 'rubytest', 'tgen-simple-mem', 337 'tgen-simple-dram'] 338 339if env['PROTOCOL'] != 'None': 340 if env['PROTOCOL'] == 'MI_example': 341 configs += [c + "-ruby" for c in configs] 342 else: 343 configs = [c + "-ruby-" + env['PROTOCOL'] for c in configs] 344 345cwd = os.getcwd() 346os.chdir(str(Dir('.').srcdir)) 347for config in configs: 348 dirs = glob.glob('*/*/*/ref/%s/*/%s' % (env['TARGET_ISA'], config)) 349 for d in dirs: 350 if not os.path.exists(os.path.join(d, 'skip')): 351 test_builder(env, d) 352os.chdir(cwd)
|