1# -*- mode:python -*-
2
3# Copyright (c) 2004-2006 The Regents of The University of Michigan
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions are
8# met: redistributions of source code must retain the above copyright
9# notice, this list of conditions and the following disclaimer;
10# redistributions in binary form must reproduce the above copyright
11# notice, this list of conditions and the following disclaimer in the
12# documentation and/or other materials provided with the distribution;
13# neither the name of the copyright holders nor the names of its
14# contributors may be used to endorse or promote products derived from
15# this software without specific prior written permission.
16#
17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28#
29# Authors: Steve Reinhardt
30# Kevin Lim
31
32import os, signal
33import sys, time
34import glob
35from SCons.Script.SConscript import SConsEnvironment
36
37Import('env')
38
39env['DIFFOUT'] = File('diff-out')
40
41# get the termcap from the environment
42termcap = env['TERMCAP']
43
44# Dict that accumulates lists of tests by category (quick, medium, long)
45env.Tests = {}
46
47def contents(node):
48 return file(str(node)).read()
49
50# functions to parse return value from scons Execute()... not the same
51# as wait() etc., so python built-in os funcs don't work.
52def signaled(status):
53 return (status & 0x80) != 0;
54
55def signum(status):
56 return (status & 0x7f);
57
58# List of signals that indicate that we should retry the test rather
59# than consider it failed.
60retry_signals = (signal.SIGTERM, signal.SIGKILL, signal.SIGINT,
61 signal.SIGQUIT, signal.SIGHUP)
62
63# regular expressions of lines to ignore when diffing outputs
64output_ignore_regexes = (
65 '^command line:', # for stdout file
66 '^M5 compiled ', # for stderr file
67 '^M5 started ', # for stderr file
68 '^M5 executing on ', # for stderr file
69 '^Simulation complete at', # for stderr file
70 '^Listening for', # for stderr file
71 'listening for remote gdb', # for stderr file
72 )
73
74output_ignore_args = ' '.join(["-I '"+s+"'" for s in output_ignore_regexes])
75
76output_ignore_args += ' --exclude=stats.txt --exclude=outdiff'
77
78def run_test(target, source, env):
79 """Check output from running test.
80
81 Targets are as follows:
82 target[0] : status
83
84 Sources are:
85 source[0] : M5 binary
86 source[1] : tests/run.py script
87 source[2] : reference stats file
88
89 """
90 # make sure target files are all gone
91 for t in target:
92 if os.path.exists(t.abspath):
93 env.Execute(Delete(t.abspath))
94
95 tgt_dir = os.path.dirname(str(target[0]))
96
97 # Base command for running test. We mess around with indirectly
98 # referring to files via SOURCES and TARGETS so that scons can mess
99 # with paths all it wants to and we still get the right files.
100 cmd = '${SOURCES[0]} -d %s -re ${SOURCES[1]} %s' % (tgt_dir, tgt_dir)
101
102 # Prefix test run with batch job submission command if appropriate.
103 # Batch command also supports timeout arg (in seconds, not minutes).
104 timeout = 15 * 60 # used to be a param, probably should be again
105 if env['BATCH']:
106 cmd = '%s -t %d %s' % (env['BATCH_CMD'], timeout, cmd)
107
108 pre_exec_time = time.time()
109 status = env.Execute(env.subst(cmd, target=target, source=source))
110 if status == 0:
111 # M5 terminated normally.
112 # Run diff on output & ref directories to find differences.
113 # Exclude the stats file since we will use diff-out on that.
114
115 # NFS file systems can be annoying and not have updated yet
116 # wait until we see the file modified
117 statsdiff = os.path.join(tgt_dir, 'statsdiff')
118 m_time = 0
119 nap = 0
120 while m_time < pre_exec_time and nap < 10:
121 try:
122 m_time = os.stat(statsdiff).st_mtime
123 except OSError:
124 pass
125 time.sleep(1)
126 nap += 1
127
128 outdiff = os.path.join(tgt_dir, 'outdiff')
129 # tack 'true' on the end so scons doesn't report diff's
130 # non-zero exit code as a build error
131 diffcmd = 'diff -ubrs %s ${SOURCES[2].dir} %s > %s; true' \
132 % (output_ignore_args, tgt_dir, outdiff)
133 env.Execute(env.subst(diffcmd, target=target, source=source))
134 print "===== Output differences ====="
135 print contents(outdiff)
136 # Run diff-out on stats.txt file
137 diffcmd = '$DIFFOUT ${SOURCES[2]} %s > %s' \
138 % (os.path.join(tgt_dir, 'stats.txt'), statsdiff)
139 diffcmd = env.subst(diffcmd, target=target, source=source)
140 status = env.Execute(diffcmd, strfunction=None)
141 print "===== Statistics differences ====="
142 print contents(statsdiff)
143
144 else: # m5 exit status != 0
145 # M5 did not terminate properly, so no need to check the output
146 if signaled(status):
147 print 'M5 terminated with signal', signum(status)
148 if signum(status) in retry_signals:
149 # Consider the test incomplete; don't create a 'status' output.
150 # Hand the return status to scons and let scons decide what
151 # to do about it (typically terminate unless run with -k).
152 return status
| 1# -*- mode:python -*-
2
3# Copyright (c) 2004-2006 The Regents of The University of Michigan
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions are
8# met: redistributions of source code must retain the above copyright
9# notice, this list of conditions and the following disclaimer;
10# redistributions in binary form must reproduce the above copyright
11# notice, this list of conditions and the following disclaimer in the
12# documentation and/or other materials provided with the distribution;
13# neither the name of the copyright holders nor the names of its
14# contributors may be used to endorse or promote products derived from
15# this software without specific prior written permission.
16#
17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28#
29# Authors: Steve Reinhardt
30# Kevin Lim
31
32import os, signal
33import sys, time
34import glob
35from SCons.Script.SConscript import SConsEnvironment
36
37Import('env')
38
39env['DIFFOUT'] = File('diff-out')
40
41# get the termcap from the environment
42termcap = env['TERMCAP']
43
44# Dict that accumulates lists of tests by category (quick, medium, long)
45env.Tests = {}
46
47def contents(node):
48 return file(str(node)).read()
49
50# functions to parse return value from scons Execute()... not the same
51# as wait() etc., so python built-in os funcs don't work.
52def signaled(status):
53 return (status & 0x80) != 0;
54
55def signum(status):
56 return (status & 0x7f);
57
58# List of signals that indicate that we should retry the test rather
59# than consider it failed.
60retry_signals = (signal.SIGTERM, signal.SIGKILL, signal.SIGINT,
61 signal.SIGQUIT, signal.SIGHUP)
62
63# regular expressions of lines to ignore when diffing outputs
64output_ignore_regexes = (
65 '^command line:', # for stdout file
66 '^M5 compiled ', # for stderr file
67 '^M5 started ', # for stderr file
68 '^M5 executing on ', # for stderr file
69 '^Simulation complete at', # for stderr file
70 '^Listening for', # for stderr file
71 'listening for remote gdb', # for stderr file
72 )
73
74output_ignore_args = ' '.join(["-I '"+s+"'" for s in output_ignore_regexes])
75
76output_ignore_args += ' --exclude=stats.txt --exclude=outdiff'
77
78def run_test(target, source, env):
79 """Check output from running test.
80
81 Targets are as follows:
82 target[0] : status
83
84 Sources are:
85 source[0] : M5 binary
86 source[1] : tests/run.py script
87 source[2] : reference stats file
88
89 """
90 # make sure target files are all gone
91 for t in target:
92 if os.path.exists(t.abspath):
93 env.Execute(Delete(t.abspath))
94
95 tgt_dir = os.path.dirname(str(target[0]))
96
97 # Base command for running test. We mess around with indirectly
98 # referring to files via SOURCES and TARGETS so that scons can mess
99 # with paths all it wants to and we still get the right files.
100 cmd = '${SOURCES[0]} -d %s -re ${SOURCES[1]} %s' % (tgt_dir, tgt_dir)
101
102 # Prefix test run with batch job submission command if appropriate.
103 # Batch command also supports timeout arg (in seconds, not minutes).
104 timeout = 15 * 60 # used to be a param, probably should be again
105 if env['BATCH']:
106 cmd = '%s -t %d %s' % (env['BATCH_CMD'], timeout, cmd)
107
108 pre_exec_time = time.time()
109 status = env.Execute(env.subst(cmd, target=target, source=source))
110 if status == 0:
111 # M5 terminated normally.
112 # Run diff on output & ref directories to find differences.
113 # Exclude the stats file since we will use diff-out on that.
114
115 # NFS file systems can be annoying and not have updated yet
116 # wait until we see the file modified
117 statsdiff = os.path.join(tgt_dir, 'statsdiff')
118 m_time = 0
119 nap = 0
120 while m_time < pre_exec_time and nap < 10:
121 try:
122 m_time = os.stat(statsdiff).st_mtime
123 except OSError:
124 pass
125 time.sleep(1)
126 nap += 1
127
128 outdiff = os.path.join(tgt_dir, 'outdiff')
129 # tack 'true' on the end so scons doesn't report diff's
130 # non-zero exit code as a build error
131 diffcmd = 'diff -ubrs %s ${SOURCES[2].dir} %s > %s; true' \
132 % (output_ignore_args, tgt_dir, outdiff)
133 env.Execute(env.subst(diffcmd, target=target, source=source))
134 print "===== Output differences ====="
135 print contents(outdiff)
136 # Run diff-out on stats.txt file
137 diffcmd = '$DIFFOUT ${SOURCES[2]} %s > %s' \
138 % (os.path.join(tgt_dir, 'stats.txt'), statsdiff)
139 diffcmd = env.subst(diffcmd, target=target, source=source)
140 status = env.Execute(diffcmd, strfunction=None)
141 print "===== Statistics differences ====="
142 print contents(statsdiff)
143
144 else: # m5 exit status != 0
145 # M5 did not terminate properly, so no need to check the output
146 if signaled(status):
147 print 'M5 terminated with signal', signum(status)
148 if signum(status) in retry_signals:
149 # Consider the test incomplete; don't create a 'status' output.
150 # Hand the return status to scons and let scons decide what
151 # to do about it (typically terminate unless run with -k).
152 return status
|
| 153 elif status == 2:
154 # The test was skipped
155 pass
|
153 else:
154 print 'M5 exited with non-zero status', status
155 # complete but failed execution (call to exit() with non-zero
156 # status, SIGABORT due to assertion failure, etc.)... fall through
157 # and generate FAILED status as if output comparison had failed
158
159 # Generate status file contents based on exit status of m5 or diff-out
160 if status == 0:
161 status_str = "passed."
| 156 else:
157 print 'M5 exited with non-zero status', status
158 # complete but failed execution (call to exit() with non-zero
159 # status, SIGABORT due to assertion failure, etc.)... fall through
160 # and generate FAILED status as if output comparison had failed
161
162 # Generate status file contents based on exit status of m5 or diff-out
163 if status == 0:
164 status_str = "passed."
|
| 165 elif status == 2:
166 status_str = "skipped."
|
162 else:
163 status_str = "FAILED!"
164 f = file(str(target[0]), 'w')
165 print >>f, tgt_dir, status_str
166 f.close()
167 # done
168 return 0
169
170def run_test_string(target, source, env):
171 return env.subst("Running test in ${TARGETS[0].dir}.",
172 target=target, source=source)
173
174testAction = env.Action(run_test, run_test_string)
175
176def print_test(target, source, env):
177 # print the status with colours to make it easier to see what
178 # passed and what failed
179 line = contents(source[0])
180
181 # split the line to words and get the last one
182 words = line.split()
183 status = words[-1]
184
185 # if the test failed make it red, if it passed make it green, and
186 # skip the punctuation
187 if status == "FAILED!":
188 status = termcap.Red + status[:-1] + termcap.Normal + status[-1]
189 elif status == "passed.":
190 status = termcap.Green + status[:-1] + termcap.Normal + status[-1]
| 167 else:
168 status_str = "FAILED!"
169 f = file(str(target[0]), 'w')
170 print >>f, tgt_dir, status_str
171 f.close()
172 # done
173 return 0
174
175def run_test_string(target, source, env):
176 return env.subst("Running test in ${TARGETS[0].dir}.",
177 target=target, source=source)
178
179testAction = env.Action(run_test, run_test_string)
180
181def print_test(target, source, env):
182 # print the status with colours to make it easier to see what
183 # passed and what failed
184 line = contents(source[0])
185
186 # split the line to words and get the last one
187 words = line.split()
188 status = words[-1]
189
190 # if the test failed make it red, if it passed make it green, and
191 # skip the punctuation
192 if status == "FAILED!":
193 status = termcap.Red + status[:-1] + termcap.Normal + status[-1]
194 elif status == "passed.":
195 status = termcap.Green + status[:-1] + termcap.Normal + status[-1]
|
| 196 elif status == "skipped.":
197 status = termcap.Yellow + status[:-1] + termcap.Normal + status[-1]
|
191
192 # put it back in the list and join with space
193 words[-1] = status
194 line = " ".join(words)
195
196 print '***** ' + line
197 return 0
198
199printAction = env.Action(print_test, strfunction = None)
200
201# Static vars for update_test:
202# - long-winded message about ignored sources
203ignore_msg = '''
204Note: The following file(s) will not be copied. New non-standard
205 output files must be copied manually once before --update-ref will
206 recognize them as outputs. Otherwise they are assumed to be
207 inputs and are ignored.
208'''
209# - reference files always needed
210needed_files = set(['simout', 'simerr', 'stats.txt', 'config.ini'])
211# - source files we always want to ignore
212known_ignores = set(['status', 'outdiff', 'statsdiff'])
213
214def update_test(target, source, env):
215 """Update reference test outputs.
216
217 Target is phony. First two sources are the ref & new stats.txt file
218 files, respectively. We actually copy everything in the
219 respective directories except the status & diff output files.
220
221 """
222 dest_dir = str(source[0].get_dir())
223 src_dir = str(source[1].get_dir())
224 dest_files = set(os.listdir(dest_dir))
225 src_files = set(os.listdir(src_dir))
226 # Copy all of the required files plus any existing dest files.
227 wanted_files = needed_files | dest_files
228 missing_files = wanted_files - src_files
229 if len(missing_files) > 0:
230 print " WARNING: the following file(s) are missing " \
231 "and will not be updated:"
232 print " ", " ,".join(missing_files)
233 copy_files = wanted_files - missing_files
234 warn_ignored_files = (src_files - copy_files) - known_ignores
235 if len(warn_ignored_files) > 0:
236 print ignore_msg,
237 print " ", ", ".join(warn_ignored_files)
238 for f in copy_files:
239 if f in dest_files:
240 print " Replacing file", f
241 dest_files.remove(f)
242 else:
243 print " Creating new file", f
244 copyAction = Copy(os.path.join(dest_dir, f), os.path.join(src_dir, f))
245 copyAction.strfunction = None
246 env.Execute(copyAction)
247 return 0
248
249def update_test_string(target, source, env):
250 return env.subst("Updating ${SOURCES[0].dir} from ${SOURCES[1].dir}",
251 target=target, source=source)
252
253updateAction = env.Action(update_test, update_test_string)
254
255def test_builder(env, ref_dir):
256 """Define a test."""
257
258 (category, mode, name, _ref, isa, opsys, config) = ref_dir.split('/')
259 assert(_ref == 'ref')
260
261 # target path (where test output goes) is the same except without
262 # the 'ref' component
263 tgt_dir = os.path.join(category, mode, name, isa, opsys, config)
264
265 # prepend file name with tgt_dir
266 def tgt(f):
267 return os.path.join(tgt_dir, f)
268
269 ref_stats = os.path.join(ref_dir, 'stats.txt')
270 new_stats = tgt('stats.txt')
271 status_file = tgt('status')
272
273 env.Command([status_file],
274 [env.M5Binary, 'run.py', ref_stats],
275 testAction)
276
277 # phony target to echo status
278 if GetOption('update_ref'):
279 p = env.Command(tgt('_update'),
280 [ref_stats, new_stats, status_file],
281 updateAction)
282 else:
283 p = env.Command(tgt('_print'), [status_file], printAction)
284
285 env.AlwaysBuild(p)
286
287
288# Figure out applicable configs based on build type
289configs = []
290if env['TARGET_ISA'] == 'alpha':
291 configs += ['tsunami-simple-atomic',
292 'tsunami-simple-timing',
293 'tsunami-simple-atomic-dual',
294 'tsunami-simple-timing-dual',
295 'twosys-tsunami-simple-atomic',
296 'tsunami-o3', 'tsunami-o3-dual',
297 'tsunami-inorder']
298if env['TARGET_ISA'] == 'sparc':
299 configs += ['t1000-simple-atomic',
300 't1000-simple-timing']
301if env['TARGET_ISA'] == 'arm':
302 configs += ['simple-atomic-dummychecker',
303 'o3-timing-checker',
304 'realview-simple-atomic',
305 'realview-simple-atomic-dual',
306 'realview-simple-timing',
307 'realview-simple-timing-dual',
308 'realview-o3',
309 'realview-o3-checker',
310 'realview-o3-dual']
311if env['TARGET_ISA'] == 'x86':
312 configs += ['pc-simple-atomic',
313 'pc-simple-timing',
314 'pc-o3-timing']
315
316configs += ['simple-atomic', 'simple-timing', 'o3-timing', 'memtest',
317 'simple-atomic-mp', 'simple-timing-mp', 'o3-timing-mp',
318 'inorder-timing', 'rubytest', 'tgen-simple-mem',
319 'tgen-simple-dram']
320
321if env['PROTOCOL'] != 'None':
322 if env['PROTOCOL'] == 'MI_example':
323 configs += [c + "-ruby" for c in configs]
324 else:
325 configs = [c + "-ruby-" + env['PROTOCOL'] for c in configs]
326
327cwd = os.getcwd()
328os.chdir(str(Dir('.').srcdir))
329for config in configs:
330 dirs = glob.glob('*/*/*/ref/%s/*/%s' % (env['TARGET_ISA'], config))
331 for d in dirs:
332 if not os.path.exists(os.path.join(d, 'skip')):
333 test_builder(env, d)
334os.chdir(cwd)
| 198
199 # put it back in the list and join with space
200 words[-1] = status
201 line = " ".join(words)
202
203 print '***** ' + line
204 return 0
205
206printAction = env.Action(print_test, strfunction = None)
207
208# Static vars for update_test:
209# - long-winded message about ignored sources
210ignore_msg = '''
211Note: The following file(s) will not be copied. New non-standard
212 output files must be copied manually once before --update-ref will
213 recognize them as outputs. Otherwise they are assumed to be
214 inputs and are ignored.
215'''
216# - reference files always needed
217needed_files = set(['simout', 'simerr', 'stats.txt', 'config.ini'])
218# - source files we always want to ignore
219known_ignores = set(['status', 'outdiff', 'statsdiff'])
220
221def update_test(target, source, env):
222 """Update reference test outputs.
223
224 Target is phony. First two sources are the ref & new stats.txt file
225 files, respectively. We actually copy everything in the
226 respective directories except the status & diff output files.
227
228 """
229 dest_dir = str(source[0].get_dir())
230 src_dir = str(source[1].get_dir())
231 dest_files = set(os.listdir(dest_dir))
232 src_files = set(os.listdir(src_dir))
233 # Copy all of the required files plus any existing dest files.
234 wanted_files = needed_files | dest_files
235 missing_files = wanted_files - src_files
236 if len(missing_files) > 0:
237 print " WARNING: the following file(s) are missing " \
238 "and will not be updated:"
239 print " ", " ,".join(missing_files)
240 copy_files = wanted_files - missing_files
241 warn_ignored_files = (src_files - copy_files) - known_ignores
242 if len(warn_ignored_files) > 0:
243 print ignore_msg,
244 print " ", ", ".join(warn_ignored_files)
245 for f in copy_files:
246 if f in dest_files:
247 print " Replacing file", f
248 dest_files.remove(f)
249 else:
250 print " Creating new file", f
251 copyAction = Copy(os.path.join(dest_dir, f), os.path.join(src_dir, f))
252 copyAction.strfunction = None
253 env.Execute(copyAction)
254 return 0
255
256def update_test_string(target, source, env):
257 return env.subst("Updating ${SOURCES[0].dir} from ${SOURCES[1].dir}",
258 target=target, source=source)
259
260updateAction = env.Action(update_test, update_test_string)
261
262def test_builder(env, ref_dir):
263 """Define a test."""
264
265 (category, mode, name, _ref, isa, opsys, config) = ref_dir.split('/')
266 assert(_ref == 'ref')
267
268 # target path (where test output goes) is the same except without
269 # the 'ref' component
270 tgt_dir = os.path.join(category, mode, name, isa, opsys, config)
271
272 # prepend file name with tgt_dir
273 def tgt(f):
274 return os.path.join(tgt_dir, f)
275
276 ref_stats = os.path.join(ref_dir, 'stats.txt')
277 new_stats = tgt('stats.txt')
278 status_file = tgt('status')
279
280 env.Command([status_file],
281 [env.M5Binary, 'run.py', ref_stats],
282 testAction)
283
284 # phony target to echo status
285 if GetOption('update_ref'):
286 p = env.Command(tgt('_update'),
287 [ref_stats, new_stats, status_file],
288 updateAction)
289 else:
290 p = env.Command(tgt('_print'), [status_file], printAction)
291
292 env.AlwaysBuild(p)
293
294
295# Figure out applicable configs based on build type
296configs = []
297if env['TARGET_ISA'] == 'alpha':
298 configs += ['tsunami-simple-atomic',
299 'tsunami-simple-timing',
300 'tsunami-simple-atomic-dual',
301 'tsunami-simple-timing-dual',
302 'twosys-tsunami-simple-atomic',
303 'tsunami-o3', 'tsunami-o3-dual',
304 'tsunami-inorder']
305if env['TARGET_ISA'] == 'sparc':
306 configs += ['t1000-simple-atomic',
307 't1000-simple-timing']
308if env['TARGET_ISA'] == 'arm':
309 configs += ['simple-atomic-dummychecker',
310 'o3-timing-checker',
311 'realview-simple-atomic',
312 'realview-simple-atomic-dual',
313 'realview-simple-timing',
314 'realview-simple-timing-dual',
315 'realview-o3',
316 'realview-o3-checker',
317 'realview-o3-dual']
318if env['TARGET_ISA'] == 'x86':
319 configs += ['pc-simple-atomic',
320 'pc-simple-timing',
321 'pc-o3-timing']
322
323configs += ['simple-atomic', 'simple-timing', 'o3-timing', 'memtest',
324 'simple-atomic-mp', 'simple-timing-mp', 'o3-timing-mp',
325 'inorder-timing', 'rubytest', 'tgen-simple-mem',
326 'tgen-simple-dram']
327
328if env['PROTOCOL'] != 'None':
329 if env['PROTOCOL'] == 'MI_example':
330 configs += [c + "-ruby" for c in configs]
331 else:
332 configs = [c + "-ruby-" + env['PROTOCOL'] for c in configs]
333
334cwd = os.getcwd()
335os.chdir(str(Dir('.').srcdir))
336for config in configs:
337 dirs = glob.glob('*/*/*/ref/%s/*/%s' % (env['TARGET_ISA'], config))
338 for d in dirs:
339 if not os.path.exists(os.path.join(d, 'skip')):
340 test_builder(env, d)
341os.chdir(cwd)
|