1# -*- mode:python -*-
2
3# Copyright (c) 2004-2006 The Regents of The University of Michigan
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions are
8# met: redistributions of source code must retain the above copyright
9# notice, this list of conditions and the following disclaimer;
10# redistributions in binary form must reproduce the above copyright
11# notice, this list of conditions and the following disclaimer in the
12# documentation and/or other materials provided with the distribution;
13# neither the name of the copyright holders nor the names of its
14# contributors may be used to endorse or promote products derived from
15# this software without specific prior written permission.
16#
17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28#
29# Authors: Steve Reinhardt
30# Kevin Lim
31
32import os, signal
33import sys, time
34import glob
35from SCons.Script.SConscript import SConsEnvironment
36
37Import('env')
38
39env['DIFFOUT'] = File('diff-out')
40
41# get the termcap from the environment
42termcap = env['TERMCAP']
43
44# Dict that accumulates lists of tests by category (quick, medium, long)
45env.Tests = {}
46
47def contents(node):
48 return file(str(node)).read()
49
50# functions to parse return value from scons Execute()... not the same
51# as wait() etc., so python built-in os funcs don't work.
52def signaled(status):
53 return (status & 0x80) != 0;
54
55def signum(status):
56 return (status & 0x7f);
57
58# List of signals that indicate that we should retry the test rather
59# than consider it failed.
60retry_signals = (signal.SIGTERM, signal.SIGKILL, signal.SIGINT,
61 signal.SIGQUIT, signal.SIGHUP)
62
63# regular expressions of lines to ignore when diffing outputs
64output_ignore_regexes = (
65 '^command line:', # for stdout file
66 '^gem5 compiled ', # for stderr file
67 '^gem5 started ', # for stderr file
68 '^gem5 executing on ', # for stderr file
69 '^Simulation complete at', # for stderr file
70 '^Listening for', # for stderr file
71 'listening for remote gdb', # for stderr file
72 )
73
74output_ignore_args = ' '.join(["-I '"+s+"'" for s in output_ignore_regexes])
75
76output_ignore_args += ' --exclude=stats.txt --exclude=outdiff'
77
78def run_test(target, source, env):
79 """Check output from running test.
80
81 Targets are as follows:
82 target[0] : status
83
84 Sources are:
85 source[0] : gem5 binary
86 source[1] : tests/run.py script
87 source[2] : reference stats file
88
89 """
90 # make sure target files are all gone
91 for t in target:
92 if os.path.exists(t.abspath):
93 env.Execute(Delete(t.abspath))
94
95 tgt_dir = os.path.dirname(str(target[0]))
96
97 # Base command for running test. We mess around with indirectly
98 # referring to files via SOURCES and TARGETS so that scons can mess
99 # with paths all it wants to and we still get the right files.
100 cmd = '${SOURCES[0]} -d %s -re ${SOURCES[1]} %s' % (tgt_dir, tgt_dir)
101
102 # Prefix test run with batch job submission command if appropriate.
103 # Batch command also supports timeout arg (in seconds, not minutes).
104 timeout = 15 * 60 # used to be a param, probably should be again
105 if env['BATCH']:
106 cmd = '%s -t %d %s' % (env['BATCH_CMD'], timeout, cmd)
| 1# -*- mode:python -*-
2
3# Copyright (c) 2004-2006 The Regents of The University of Michigan
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions are
8# met: redistributions of source code must retain the above copyright
9# notice, this list of conditions and the following disclaimer;
10# redistributions in binary form must reproduce the above copyright
11# notice, this list of conditions and the following disclaimer in the
12# documentation and/or other materials provided with the distribution;
13# neither the name of the copyright holders nor the names of its
14# contributors may be used to endorse or promote products derived from
15# this software without specific prior written permission.
16#
17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28#
29# Authors: Steve Reinhardt
30# Kevin Lim
31
32import os, signal
33import sys, time
34import glob
35from SCons.Script.SConscript import SConsEnvironment
36
37Import('env')
38
39env['DIFFOUT'] = File('diff-out')
40
41# get the termcap from the environment
42termcap = env['TERMCAP']
43
44# Dict that accumulates lists of tests by category (quick, medium, long)
45env.Tests = {}
46
47def contents(node):
48 return file(str(node)).read()
49
50# functions to parse return value from scons Execute()... not the same
51# as wait() etc., so python built-in os funcs don't work.
52def signaled(status):
53 return (status & 0x80) != 0;
54
55def signum(status):
56 return (status & 0x7f);
57
58# List of signals that indicate that we should retry the test rather
59# than consider it failed.
60retry_signals = (signal.SIGTERM, signal.SIGKILL, signal.SIGINT,
61 signal.SIGQUIT, signal.SIGHUP)
62
63# regular expressions of lines to ignore when diffing outputs
64output_ignore_regexes = (
65 '^command line:', # for stdout file
66 '^gem5 compiled ', # for stderr file
67 '^gem5 started ', # for stderr file
68 '^gem5 executing on ', # for stderr file
69 '^Simulation complete at', # for stderr file
70 '^Listening for', # for stderr file
71 'listening for remote gdb', # for stderr file
72 )
73
74output_ignore_args = ' '.join(["-I '"+s+"'" for s in output_ignore_regexes])
75
76output_ignore_args += ' --exclude=stats.txt --exclude=outdiff'
77
78def run_test(target, source, env):
79 """Check output from running test.
80
81 Targets are as follows:
82 target[0] : status
83
84 Sources are:
85 source[0] : gem5 binary
86 source[1] : tests/run.py script
87 source[2] : reference stats file
88
89 """
90 # make sure target files are all gone
91 for t in target:
92 if os.path.exists(t.abspath):
93 env.Execute(Delete(t.abspath))
94
95 tgt_dir = os.path.dirname(str(target[0]))
96
97 # Base command for running test. We mess around with indirectly
98 # referring to files via SOURCES and TARGETS so that scons can mess
99 # with paths all it wants to and we still get the right files.
100 cmd = '${SOURCES[0]} -d %s -re ${SOURCES[1]} %s' % (tgt_dir, tgt_dir)
101
102 # Prefix test run with batch job submission command if appropriate.
103 # Batch command also supports timeout arg (in seconds, not minutes).
104 timeout = 15 * 60 # used to be a param, probably should be again
105 if env['BATCH']:
106 cmd = '%s -t %d %s' % (env['BATCH_CMD'], timeout, cmd)
|
| 107 # The slowest regression (bzip2) requires ~2.8 hours;
108 # 4 hours was chosen to be conservative.
109 elif env['TIMEOUT']:
110 cmd = 'timeout 4h %s' % cmd
|
107
108 # Create a default value for the status string, changed as needed
109 # based on the status.
110 status_str = "passed."
111
112 pre_exec_time = time.time()
113 status = env.Execute(env.subst(cmd, target=target, source=source))
114 if status == 0:
115 # gem5 terminated normally.
116 # Run diff on output & ref directories to find differences.
117 # Exclude the stats file since we will use diff-out on that.
118
119 # NFS file systems can be annoying and not have updated yet
120 # wait until we see the file modified
121 statsdiff = os.path.join(tgt_dir, 'statsdiff')
122 m_time = 0
123 nap = 0
124 while m_time < pre_exec_time and nap < 10:
125 try:
126 m_time = os.stat(statsdiff).st_mtime
127 except OSError:
128 pass
129 time.sleep(1)
130 nap += 1
131
132 outdiff = os.path.join(tgt_dir, 'outdiff')
133 # tack 'true' on the end so scons doesn't report diff's
134 # non-zero exit code as a build error
135 diffcmd = 'diff -ubrs %s ${SOURCES[2].dir} %s > %s; true' \
136 % (output_ignore_args, tgt_dir, outdiff)
137 env.Execute(env.subst(diffcmd, target=target, source=source))
138 print "===== Output differences ====="
139 print contents(outdiff)
140 # Run diff-out on stats.txt file
141 diffcmd = '$DIFFOUT ${SOURCES[2]} %s > %s' \
142 % (os.path.join(tgt_dir, 'stats.txt'), statsdiff)
143 diffcmd = env.subst(diffcmd, target=target, source=source)
144 diff_status = env.Execute(diffcmd, strfunction=None)
145 # If there is a difference, change the status string to say so
146 if diff_status != 0:
147 status_str = "CHANGED!"
148 print "===== Statistics differences ====="
149 print contents(statsdiff)
150
151 else: # gem5 exit status != 0
152 # Consider it a failed test unless the exit status is 2
153 status_str = "FAILED!"
154 # gem5 did not terminate properly, so no need to check the output
| 111
112 # Create a default value for the status string, changed as needed
113 # based on the status.
114 status_str = "passed."
115
116 pre_exec_time = time.time()
117 status = env.Execute(env.subst(cmd, target=target, source=source))
118 if status == 0:
119 # gem5 terminated normally.
120 # Run diff on output & ref directories to find differences.
121 # Exclude the stats file since we will use diff-out on that.
122
123 # NFS file systems can be annoying and not have updated yet
124 # wait until we see the file modified
125 statsdiff = os.path.join(tgt_dir, 'statsdiff')
126 m_time = 0
127 nap = 0
128 while m_time < pre_exec_time and nap < 10:
129 try:
130 m_time = os.stat(statsdiff).st_mtime
131 except OSError:
132 pass
133 time.sleep(1)
134 nap += 1
135
136 outdiff = os.path.join(tgt_dir, 'outdiff')
137 # tack 'true' on the end so scons doesn't report diff's
138 # non-zero exit code as a build error
139 diffcmd = 'diff -ubrs %s ${SOURCES[2].dir} %s > %s; true' \
140 % (output_ignore_args, tgt_dir, outdiff)
141 env.Execute(env.subst(diffcmd, target=target, source=source))
142 print "===== Output differences ====="
143 print contents(outdiff)
144 # Run diff-out on stats.txt file
145 diffcmd = '$DIFFOUT ${SOURCES[2]} %s > %s' \
146 % (os.path.join(tgt_dir, 'stats.txt'), statsdiff)
147 diffcmd = env.subst(diffcmd, target=target, source=source)
148 diff_status = env.Execute(diffcmd, strfunction=None)
149 # If there is a difference, change the status string to say so
150 if diff_status != 0:
151 status_str = "CHANGED!"
152 print "===== Statistics differences ====="
153 print contents(statsdiff)
154
155 else: # gem5 exit status != 0
156 # Consider it a failed test unless the exit status is 2
157 status_str = "FAILED!"
158 # gem5 did not terminate properly, so no need to check the output
|
155 if signaled(status):
| 159 if env['TIMEOUT'] and status == 124:
160 status_str = "TIMED-OUT!"
161 elif signaled(status):
|
156 print 'gem5 terminated with signal', signum(status)
157 if signum(status) in retry_signals:
158 # Consider the test incomplete; don't create a 'status' output.
159 # Hand the return status to scons and let scons decide what
160 # to do about it (typically terminate unless run with -k).
161 return status
162 elif status == 2:
163 # The test was skipped, change the status string to say so
164 status_str = "skipped."
165 else:
166 print 'gem5 exited with non-zero status', status
167 # complete but failed execution (call to exit() with non-zero
168 # status, SIGABORT due to assertion failure, etc.)... fall through
169 # and generate FAILED status as if output comparison had failed
170
171 # Generate status file contents based on exit status of gem5 and diff-out
172 f = file(str(target[0]), 'w')
173 print >>f, tgt_dir, status_str
174 f.close()
175 # done
176 return 0
177
178def run_test_string(target, source, env):
179 return env.subst("Running test in ${TARGETS[0].dir}.",
180 target=target, source=source)
181
182testAction = env.Action(run_test, run_test_string)
183
184def print_test(target, source, env):
185 # print the status with colours to make it easier to see what
186 # passed and what failed
187 line = contents(source[0])
188
189 # split the line to words and get the last one
190 words = line.split()
191 status = words[-1]
192
193 # if the test failed make it red, if it passed make it green, and
194 # skip the punctuation
| 162 print 'gem5 terminated with signal', signum(status)
163 if signum(status) in retry_signals:
164 # Consider the test incomplete; don't create a 'status' output.
165 # Hand the return status to scons and let scons decide what
166 # to do about it (typically terminate unless run with -k).
167 return status
168 elif status == 2:
169 # The test was skipped, change the status string to say so
170 status_str = "skipped."
171 else:
172 print 'gem5 exited with non-zero status', status
173 # complete but failed execution (call to exit() with non-zero
174 # status, SIGABORT due to assertion failure, etc.)... fall through
175 # and generate FAILED status as if output comparison had failed
176
177 # Generate status file contents based on exit status of gem5 and diff-out
178 f = file(str(target[0]), 'w')
179 print >>f, tgt_dir, status_str
180 f.close()
181 # done
182 return 0
183
184def run_test_string(target, source, env):
185 return env.subst("Running test in ${TARGETS[0].dir}.",
186 target=target, source=source)
187
188testAction = env.Action(run_test, run_test_string)
189
190def print_test(target, source, env):
191 # print the status with colours to make it easier to see what
192 # passed and what failed
193 line = contents(source[0])
194
195 # split the line to words and get the last one
196 words = line.split()
197 status = words[-1]
198
199 # if the test failed make it red, if it passed make it green, and
200 # skip the punctuation
|
195 if status == "FAILED!":
| 201 if status == "FAILED!" or status == "TIMED-OUT!":
|
196 status = termcap.Red + status[:-1] + termcap.Normal + status[-1]
197 elif status == "CHANGED!":
198 status = termcap.Yellow + status[:-1] + termcap.Normal + status[-1]
199 elif status == "passed.":
200 status = termcap.Green + status[:-1] + termcap.Normal + status[-1]
201 elif status == "skipped.":
202 status = termcap.Cyan + status[:-1] + termcap.Normal + status[-1]
203
204 # put it back in the list and join with space
205 words[-1] = status
206 line = " ".join(words)
207
208 print '***** ' + line
209 return 0
210
211printAction = env.Action(print_test, strfunction = None)
212
213# Static vars for update_test:
214# - long-winded message about ignored sources
215ignore_msg = '''
216Note: The following file(s) will not be copied. New non-standard
217 output files must be copied manually once before --update-ref will
218 recognize them as outputs. Otherwise they are assumed to be
219 inputs and are ignored.
220'''
221# - reference files always needed
222needed_files = set(['simout', 'simerr', 'stats.txt', 'config.ini'])
223# - source files we always want to ignore
224known_ignores = set(['status', 'outdiff', 'statsdiff'])
225
226def update_test(target, source, env):
227 """Update reference test outputs.
228
229 Target is phony. First two sources are the ref & new stats.txt file
230 files, respectively. We actually copy everything in the
231 respective directories except the status & diff output files.
232
233 """
234 dest_dir = str(source[0].get_dir())
235 src_dir = str(source[1].get_dir())
236 dest_files = set(os.listdir(dest_dir))
237 src_files = set(os.listdir(src_dir))
238 # Copy all of the required files plus any existing dest files.
239 wanted_files = needed_files | dest_files
240 missing_files = wanted_files - src_files
241 if len(missing_files) > 0:
242 print " WARNING: the following file(s) are missing " \
243 "and will not be updated:"
244 print " ", " ,".join(missing_files)
245 copy_files = wanted_files - missing_files
246 warn_ignored_files = (src_files - copy_files) - known_ignores
247 if len(warn_ignored_files) > 0:
248 print ignore_msg,
249 print " ", ", ".join(warn_ignored_files)
250 for f in copy_files:
251 if f in dest_files:
252 print " Replacing file", f
253 dest_files.remove(f)
254 else:
255 print " Creating new file", f
256 copyAction = Copy(os.path.join(dest_dir, f), os.path.join(src_dir, f))
257 copyAction.strfunction = None
258 env.Execute(copyAction)
259 return 0
260
261def update_test_string(target, source, env):
262 return env.subst("Updating ${SOURCES[0].dir} from ${SOURCES[1].dir}",
263 target=target, source=source)
264
265updateAction = env.Action(update_test, update_test_string)
266
267def test_builder(env, ref_dir):
268 """Define a test."""
269
270 path = list(ref_dir.split('/'))
271
272 # target path (where test output goes) consists of category, mode,
273 # name, isa, opsys, and config (skips the 'ref' component)
274 assert(path.pop(-4) == 'ref')
275 tgt_dir = os.path.join(*path[-6:])
276
277 # local closure for prepending target path to filename
278 def tgt(f):
279 return os.path.join(tgt_dir, f)
280
281 ref_stats = os.path.join(ref_dir, 'stats.txt')
282 new_stats = tgt('stats.txt')
283 status_file = tgt('status')
284
285 env.Command([status_file, new_stats],
286 [env.M5Binary, 'run.py', ref_stats],
287 testAction)
288
289 # phony target to echo status
290 if GetOption('update_ref'):
291 p = env.Command(tgt('_update'),
292 [ref_stats, new_stats, status_file],
293 updateAction)
294 else:
295 p = env.Command(tgt('_print'), [status_file], printAction)
296
297 env.AlwaysBuild(p)
298
299
300# Figure out applicable configs based on build type
301configs = []
302if env['TARGET_ISA'] == 'alpha':
303 configs += ['tsunami-simple-atomic',
304 'tsunami-simple-timing',
305 'tsunami-simple-atomic-dual',
306 'tsunami-simple-timing-dual',
307 'twosys-tsunami-simple-atomic',
308 'tsunami-o3', 'tsunami-o3-dual',
309 'tsunami-minor', 'tsunami-minor-dual',
310 'tsunami-switcheroo-full']
311if env['TARGET_ISA'] == 'sparc':
312 configs += ['t1000-simple-atomic',
313 't1000-simple-timing']
314if env['TARGET_ISA'] == 'arm':
315 configs += ['simple-atomic-dummychecker',
316 'o3-timing-checker',
317 'realview-simple-atomic',
318 'realview-simple-atomic-dual',
319 'realview-simple-timing',
320 'realview-simple-timing-dual',
321 'realview-o3',
322 'realview-o3-checker',
323 'realview-o3-dual',
324 'realview-minor',
325 'realview-minor-dual',
326 'realview-switcheroo-atomic',
327 'realview-switcheroo-timing',
328 'realview-switcheroo-o3',
329 'realview-switcheroo-full']
330if env['TARGET_ISA'] == 'x86':
331 configs += ['pc-simple-atomic',
332 'pc-simple-timing',
333 'pc-o3-timing',
334 'pc-switcheroo-full']
335
336configs += ['simple-atomic', 'simple-atomic-mp',
337 'simple-timing', 'simple-timing-mp',
338 'inorder-timing',
339 'minor-timing', 'minor-timing-mp',
340 'o3-timing', 'o3-timing-mp',
341 'rubytest', 'memtest',
342 'tgen-simple-mem', 'tgen-dram-ctrl']
343
344if env['PROTOCOL'] != 'None':
345 if env['PROTOCOL'] == 'MI_example':
346 configs += [c + "-ruby" for c in configs]
347 else:
348 configs = [c + "-ruby-" + env['PROTOCOL'] for c in configs]
349
350src = Dir('.').srcdir
351for config in configs:
352 dirs = src.glob('*/*/*/ref/%s/*/%s' % (env['TARGET_ISA'], config))
353 for d in dirs:
354 d = str(d)
355 if not os.path.exists(os.path.join(d, 'skip')):
356 test_builder(env, d)
| 202 status = termcap.Red + status[:-1] + termcap.Normal + status[-1]
203 elif status == "CHANGED!":
204 status = termcap.Yellow + status[:-1] + termcap.Normal + status[-1]
205 elif status == "passed.":
206 status = termcap.Green + status[:-1] + termcap.Normal + status[-1]
207 elif status == "skipped.":
208 status = termcap.Cyan + status[:-1] + termcap.Normal + status[-1]
209
210 # put it back in the list and join with space
211 words[-1] = status
212 line = " ".join(words)
213
214 print '***** ' + line
215 return 0
216
217printAction = env.Action(print_test, strfunction = None)
218
219# Static vars for update_test:
220# - long-winded message about ignored sources
221ignore_msg = '''
222Note: The following file(s) will not be copied. New non-standard
223 output files must be copied manually once before --update-ref will
224 recognize them as outputs. Otherwise they are assumed to be
225 inputs and are ignored.
226'''
227# - reference files always needed
228needed_files = set(['simout', 'simerr', 'stats.txt', 'config.ini'])
229# - source files we always want to ignore
230known_ignores = set(['status', 'outdiff', 'statsdiff'])
231
232def update_test(target, source, env):
233 """Update reference test outputs.
234
235 Target is phony. First two sources are the ref & new stats.txt file
236 files, respectively. We actually copy everything in the
237 respective directories except the status & diff output files.
238
239 """
240 dest_dir = str(source[0].get_dir())
241 src_dir = str(source[1].get_dir())
242 dest_files = set(os.listdir(dest_dir))
243 src_files = set(os.listdir(src_dir))
244 # Copy all of the required files plus any existing dest files.
245 wanted_files = needed_files | dest_files
246 missing_files = wanted_files - src_files
247 if len(missing_files) > 0:
248 print " WARNING: the following file(s) are missing " \
249 "and will not be updated:"
250 print " ", " ,".join(missing_files)
251 copy_files = wanted_files - missing_files
252 warn_ignored_files = (src_files - copy_files) - known_ignores
253 if len(warn_ignored_files) > 0:
254 print ignore_msg,
255 print " ", ", ".join(warn_ignored_files)
256 for f in copy_files:
257 if f in dest_files:
258 print " Replacing file", f
259 dest_files.remove(f)
260 else:
261 print " Creating new file", f
262 copyAction = Copy(os.path.join(dest_dir, f), os.path.join(src_dir, f))
263 copyAction.strfunction = None
264 env.Execute(copyAction)
265 return 0
266
267def update_test_string(target, source, env):
268 return env.subst("Updating ${SOURCES[0].dir} from ${SOURCES[1].dir}",
269 target=target, source=source)
270
271updateAction = env.Action(update_test, update_test_string)
272
273def test_builder(env, ref_dir):
274 """Define a test."""
275
276 path = list(ref_dir.split('/'))
277
278 # target path (where test output goes) consists of category, mode,
279 # name, isa, opsys, and config (skips the 'ref' component)
280 assert(path.pop(-4) == 'ref')
281 tgt_dir = os.path.join(*path[-6:])
282
283 # local closure for prepending target path to filename
284 def tgt(f):
285 return os.path.join(tgt_dir, f)
286
287 ref_stats = os.path.join(ref_dir, 'stats.txt')
288 new_stats = tgt('stats.txt')
289 status_file = tgt('status')
290
291 env.Command([status_file, new_stats],
292 [env.M5Binary, 'run.py', ref_stats],
293 testAction)
294
295 # phony target to echo status
296 if GetOption('update_ref'):
297 p = env.Command(tgt('_update'),
298 [ref_stats, new_stats, status_file],
299 updateAction)
300 else:
301 p = env.Command(tgt('_print'), [status_file], printAction)
302
303 env.AlwaysBuild(p)
304
305
306# Figure out applicable configs based on build type
307configs = []
308if env['TARGET_ISA'] == 'alpha':
309 configs += ['tsunami-simple-atomic',
310 'tsunami-simple-timing',
311 'tsunami-simple-atomic-dual',
312 'tsunami-simple-timing-dual',
313 'twosys-tsunami-simple-atomic',
314 'tsunami-o3', 'tsunami-o3-dual',
315 'tsunami-minor', 'tsunami-minor-dual',
316 'tsunami-switcheroo-full']
317if env['TARGET_ISA'] == 'sparc':
318 configs += ['t1000-simple-atomic',
319 't1000-simple-timing']
320if env['TARGET_ISA'] == 'arm':
321 configs += ['simple-atomic-dummychecker',
322 'o3-timing-checker',
323 'realview-simple-atomic',
324 'realview-simple-atomic-dual',
325 'realview-simple-timing',
326 'realview-simple-timing-dual',
327 'realview-o3',
328 'realview-o3-checker',
329 'realview-o3-dual',
330 'realview-minor',
331 'realview-minor-dual',
332 'realview-switcheroo-atomic',
333 'realview-switcheroo-timing',
334 'realview-switcheroo-o3',
335 'realview-switcheroo-full']
336if env['TARGET_ISA'] == 'x86':
337 configs += ['pc-simple-atomic',
338 'pc-simple-timing',
339 'pc-o3-timing',
340 'pc-switcheroo-full']
341
342configs += ['simple-atomic', 'simple-atomic-mp',
343 'simple-timing', 'simple-timing-mp',
344 'inorder-timing',
345 'minor-timing', 'minor-timing-mp',
346 'o3-timing', 'o3-timing-mp',
347 'rubytest', 'memtest',
348 'tgen-simple-mem', 'tgen-dram-ctrl']
349
350if env['PROTOCOL'] != 'None':
351 if env['PROTOCOL'] == 'MI_example':
352 configs += [c + "-ruby" for c in configs]
353 else:
354 configs = [c + "-ruby-" + env['PROTOCOL'] for c in configs]
355
356src = Dir('.').srcdir
357for config in configs:
358 dirs = src.glob('*/*/*/ref/%s/*/%s' % (env['TARGET_ISA'], config))
359 for d in dirs:
360 d = str(d)
361 if not os.path.exists(os.path.join(d, 'skip')):
362 test_builder(env, d)
|