1/* 2 * Copyright (c) 2015 ARM Limited 3 * All rights reserved 4 * 5 * The license below extends only to copyright in the software and shall 6 * not be construed as granting a license to any other intellectual 7 * property including but not limited to intellectual property relating 8 * to a hardware implementation of the functionality of the software 9 * licensed hereunder. You may use the software subject to the license 10 * terms below provided that you ensure that this notice is replicated 11 * unmodified and in its entirety in all distributions of the software, 12 * modified or unmodified, in source code or in binary form. 13 * 14 * Copyright (c) 2002-2005 The Regents of The University of Michigan 15 * All rights reserved. 16 * 17 * Redistribution and use in source and binary forms, with or without 18 * modification, are permitted provided that the following conditions are 19 * met: redistributions of source code must retain the above copyright 20 * notice, this list of conditions and the following disclaimer; 21 * redistributions in binary form must reproduce the above copyright 22 * notice, this list of conditions and the following disclaimer in the 23 * documentation and/or other materials provided with the distribution; 24 * neither the name of the copyright holders nor the names of its 25 * contributors may be used to endorse or promote products derived from 26 * this software without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 39 * 40 * Authors: Nathan Binkert 41 * Erik Hallnor 42 * Steve Reinhardt 43 * Andreas Sandberg 44 */ 45 46/* @file 47 * Serialization Interface Declarations 48 */ 49 50#ifndef __SERIALIZE_HH__ 51#define __SERIALIZE_HH__ 52 53 54#include <iostream> 55#include <list> 56#include <map> 57#include <stack> 58#include <vector> 59 60#include "base/bitunion.hh" 61#include "base/types.hh" 62 63class IniFile; 64class Serializable; 65class CheckpointIn; 66class SimObject; 67class EventQueue; 68 69typedef std::ostream CheckpointOut; 70 71 72/** The current version of the checkpoint format. 73 * This should be incremented by 1 and only 1 for every new version, where a new 74 * version is defined as a checkpoint created before this version won't work on 75 * the current version until the checkpoint format is updated. Adding a new 76 * SimObject shouldn't cause the version number to increase, only changes to 77 * existing objects such as serializing/unserializing more state, changing sizes 78 * of serialized arrays, etc. */ 79static const uint64_t gem5CheckpointVersion = 0x000000000000000e; 80 81template <class T> 82void paramOut(CheckpointOut &cp, const std::string &name, const T ¶m); 83 84template <typename DataType, typename BitUnion> 85void paramOut(CheckpointOut &cp, const std::string &name, 86 const BitfieldBackend::BitUnionOperators<DataType, BitUnion> &p) 87{ 88 paramOut(cp, name, p.__data); 89} 90 91template <class T> 92void paramIn(CheckpointIn &cp, const std::string &name, T ¶m); 93 94template <typename DataType, typename BitUnion> 95void paramIn(CheckpointIn &cp, const std::string &name, 96 BitfieldBackend::BitUnionOperators<DataType, BitUnion> &p) 97{ 98 paramIn(cp, name, p.__data); 99} 100 101template <class T> 102bool optParamIn(CheckpointIn &cp, const std::string &name, T ¶m); 103 104template <typename DataType, typename BitUnion> 105bool optParamIn(CheckpointIn &cp, const std::string &name, 106 BitfieldBackend::BitUnionOperators<DataType, BitUnion> &p) 107{ 108 return optParamIn(cp, name, p.__data); 109} 110 111template <class T> 112void arrayParamOut(CheckpointOut &cp, const std::string &name, 113 const T *param, unsigned size); 114 115template <class T> 116void arrayParamOut(CheckpointOut &cp, const std::string &name, 117 const std::vector<T> ¶m); 118 119template <class T> 120void arrayParamOut(CheckpointOut &cp, const std::string &name, 121 const std::list<T> ¶m); 122 123template <class T> 124void arrayParamIn(CheckpointIn &cp, const std::string &name, 125 T *param, unsigned size); 126 127template <class T> 128void arrayParamIn(CheckpointIn &cp, const std::string &name, 129 std::vector<T> ¶m); 130 131template <class T> 132void arrayParamIn(CheckpointIn &cp, const std::string &name, 133 std::list<T> ¶m); 134 135void 136objParamIn(CheckpointIn &cp, const std::string &name, SimObject * ¶m); 137 138template <typename T> 139void fromInt(T &t, int i) 140{ 141 t = (T)i; 142} 143 144template <typename T> 145void fromSimObject(T &t, SimObject *s) 146{ 147 t = dynamic_cast<T>(s); 148} 149 150// 151// These macros are streamlined to use in serialize/unserialize 152// functions. It's assumed that serialize() has a parameter 'os' for 153// the ostream, and unserialize() has parameters 'cp' and 'section'. 154#define SERIALIZE_SCALAR(scalar) paramOut(cp, #scalar, scalar) 155 156#define UNSERIALIZE_SCALAR(scalar) paramIn(cp, #scalar, scalar) 157#define UNSERIALIZE_OPT_SCALAR(scalar) optParamIn(cp, #scalar, scalar) 158 159// ENUMs are like SCALARs, but we cast them to ints on the way out 160#define SERIALIZE_ENUM(scalar) paramOut(cp, #scalar, (int)scalar) 161 162#define UNSERIALIZE_ENUM(scalar) \ 163 do { \ 164 int tmp; \ 165 paramIn(cp, #scalar, tmp); \ 166 fromInt(scalar, tmp); \ 167 } while (0) 168 169#define SERIALIZE_ARRAY(member, size) \ 170 arrayParamOut(cp, #member, member, size) 171 172#define UNSERIALIZE_ARRAY(member, size) \ 173 arrayParamIn(cp, #member, member, size) 174 175#define SERIALIZE_CONTAINER(member) \ 176 arrayParamOut(cp, #member, member) 177 178#define UNSERIALIZE_CONTAINER(member) \ 179 arrayParamIn(cp, #member, member) 180 181#define SERIALIZE_EVENT(event) event.serializeSection(cp, #event); 182 183#define UNSERIALIZE_EVENT(event) \ 184 do { \ 185 event.unserializeSection(cp, #event); \ 186 eventQueue()->checkpointReschedule(&event); \ 187 } while(0) 188
| 1/* 2 * Copyright (c) 2015 ARM Limited 3 * All rights reserved 4 * 5 * The license below extends only to copyright in the software and shall 6 * not be construed as granting a license to any other intellectual 7 * property including but not limited to intellectual property relating 8 * to a hardware implementation of the functionality of the software 9 * licensed hereunder. You may use the software subject to the license 10 * terms below provided that you ensure that this notice is replicated 11 * unmodified and in its entirety in all distributions of the software, 12 * modified or unmodified, in source code or in binary form. 13 * 14 * Copyright (c) 2002-2005 The Regents of The University of Michigan 15 * All rights reserved. 16 * 17 * Redistribution and use in source and binary forms, with or without 18 * modification, are permitted provided that the following conditions are 19 * met: redistributions of source code must retain the above copyright 20 * notice, this list of conditions and the following disclaimer; 21 * redistributions in binary form must reproduce the above copyright 22 * notice, this list of conditions and the following disclaimer in the 23 * documentation and/or other materials provided with the distribution; 24 * neither the name of the copyright holders nor the names of its 25 * contributors may be used to endorse or promote products derived from 26 * this software without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 39 * 40 * Authors: Nathan Binkert 41 * Erik Hallnor 42 * Steve Reinhardt 43 * Andreas Sandberg 44 */ 45 46/* @file 47 * Serialization Interface Declarations 48 */ 49 50#ifndef __SERIALIZE_HH__ 51#define __SERIALIZE_HH__ 52 53 54#include <iostream> 55#include <list> 56#include <map> 57#include <stack> 58#include <vector> 59 60#include "base/bitunion.hh" 61#include "base/types.hh" 62 63class IniFile; 64class Serializable; 65class CheckpointIn; 66class SimObject; 67class EventQueue; 68 69typedef std::ostream CheckpointOut; 70 71 72/** The current version of the checkpoint format. 73 * This should be incremented by 1 and only 1 for every new version, where a new 74 * version is defined as a checkpoint created before this version won't work on 75 * the current version until the checkpoint format is updated. Adding a new 76 * SimObject shouldn't cause the version number to increase, only changes to 77 * existing objects such as serializing/unserializing more state, changing sizes 78 * of serialized arrays, etc. */ 79static const uint64_t gem5CheckpointVersion = 0x000000000000000e; 80 81template <class T> 82void paramOut(CheckpointOut &cp, const std::string &name, const T ¶m); 83 84template <typename DataType, typename BitUnion> 85void paramOut(CheckpointOut &cp, const std::string &name, 86 const BitfieldBackend::BitUnionOperators<DataType, BitUnion> &p) 87{ 88 paramOut(cp, name, p.__data); 89} 90 91template <class T> 92void paramIn(CheckpointIn &cp, const std::string &name, T ¶m); 93 94template <typename DataType, typename BitUnion> 95void paramIn(CheckpointIn &cp, const std::string &name, 96 BitfieldBackend::BitUnionOperators<DataType, BitUnion> &p) 97{ 98 paramIn(cp, name, p.__data); 99} 100 101template <class T> 102bool optParamIn(CheckpointIn &cp, const std::string &name, T ¶m); 103 104template <typename DataType, typename BitUnion> 105bool optParamIn(CheckpointIn &cp, const std::string &name, 106 BitfieldBackend::BitUnionOperators<DataType, BitUnion> &p) 107{ 108 return optParamIn(cp, name, p.__data); 109} 110 111template <class T> 112void arrayParamOut(CheckpointOut &cp, const std::string &name, 113 const T *param, unsigned size); 114 115template <class T> 116void arrayParamOut(CheckpointOut &cp, const std::string &name, 117 const std::vector<T> ¶m); 118 119template <class T> 120void arrayParamOut(CheckpointOut &cp, const std::string &name, 121 const std::list<T> ¶m); 122 123template <class T> 124void arrayParamIn(CheckpointIn &cp, const std::string &name, 125 T *param, unsigned size); 126 127template <class T> 128void arrayParamIn(CheckpointIn &cp, const std::string &name, 129 std::vector<T> ¶m); 130 131template <class T> 132void arrayParamIn(CheckpointIn &cp, const std::string &name, 133 std::list<T> ¶m); 134 135void 136objParamIn(CheckpointIn &cp, const std::string &name, SimObject * ¶m); 137 138template <typename T> 139void fromInt(T &t, int i) 140{ 141 t = (T)i; 142} 143 144template <typename T> 145void fromSimObject(T &t, SimObject *s) 146{ 147 t = dynamic_cast<T>(s); 148} 149 150// 151// These macros are streamlined to use in serialize/unserialize 152// functions. It's assumed that serialize() has a parameter 'os' for 153// the ostream, and unserialize() has parameters 'cp' and 'section'. 154#define SERIALIZE_SCALAR(scalar) paramOut(cp, #scalar, scalar) 155 156#define UNSERIALIZE_SCALAR(scalar) paramIn(cp, #scalar, scalar) 157#define UNSERIALIZE_OPT_SCALAR(scalar) optParamIn(cp, #scalar, scalar) 158 159// ENUMs are like SCALARs, but we cast them to ints on the way out 160#define SERIALIZE_ENUM(scalar) paramOut(cp, #scalar, (int)scalar) 161 162#define UNSERIALIZE_ENUM(scalar) \ 163 do { \ 164 int tmp; \ 165 paramIn(cp, #scalar, tmp); \ 166 fromInt(scalar, tmp); \ 167 } while (0) 168 169#define SERIALIZE_ARRAY(member, size) \ 170 arrayParamOut(cp, #member, member, size) 171 172#define UNSERIALIZE_ARRAY(member, size) \ 173 arrayParamIn(cp, #member, member, size) 174 175#define SERIALIZE_CONTAINER(member) \ 176 arrayParamOut(cp, #member, member) 177 178#define UNSERIALIZE_CONTAINER(member) \ 179 arrayParamIn(cp, #member, member) 180 181#define SERIALIZE_EVENT(event) event.serializeSection(cp, #event); 182 183#define UNSERIALIZE_EVENT(event) \ 184 do { \ 185 event.unserializeSection(cp, #event); \ 186 eventQueue()->checkpointReschedule(&event); \ 187 } while(0) 188
|
189 190#define SERIALIZE_OBJPTR(objptr) paramOut(cp, #objptr, (objptr)->name()) 191 192#define UNSERIALIZE_OBJPTR(objptr) \ 193 do { \ 194 SimObject *sptr; \ 195 objParamIn(cp, #objptr, sptr); \ 196 fromSimObject(objptr, sptr); \ 197 } while (0) 198 199/** 200 * Basic support for object serialization. 201 * 202 * Objects that support serialization should derive from this 203 * class. Such objects can largely be divided into two categories: 1) 204 * True SimObjects (deriving from SimObject), and 2) child objects 205 * (non-SimObjects). 206 * 207 * SimObjects are serialized automatically into their own sections 208 * automatically by the SimObject base class (see 209 * SimObject::serializeAll(). 210 * 211 * SimObjects can contain other serializable objects that are not 212 * SimObjects. Much like normal serialized members are not serialized 213 * automatically, these objects will not be serialized automatically 214 * and it is expected that the objects owning such serializable 215 * objects call the required serialization/unserialization methods on 216 * child objects. The preferred method to serialize a child object is 217 * to call serializeSection() on the child, which serializes the 218 * object into a new subsection in the current section. Another option 219 * is to call serialize() directly, which serializes the object into 220 * the current section. The latter is not recommended as it can lead 221 * to naming clashes between objects. 222 * 223 * @note Many objects that support serialization need to be put in a 224 * consistent state when serialization takes place. We refer to the 225 * action of forcing an object into a consistent state as 226 * 'draining'. Objects that need draining inherit from Drainable. See 227 * Drainable for more information. 228 */ 229class Serializable 230{ 231 protected: 232 /** 233 * Scoped checkpoint section helper class 234 * 235 * This helper class creates a section within a checkpoint without 236 * the need for a separate serializeable object. It is mainly used 237 * within the Serializable class when serializing or unserializing 238 * section (see serializeSection() and unserializeSection()). It 239 * can also be used to maintain backwards compatibility in 240 * existing code that serializes structs that are not inheriting 241 * from Serializable into subsections. 242 * 243 * When the class is instantiated, it appends a name to the active 244 * path in a checkpoint. The old path is later restored when the 245 * instance is destroyed. For example, serializeSection() could be 246 * implemented by instantiating a ScopedCheckpointSection and then 247 * calling serialize() on an object. 248 */ 249 class ScopedCheckpointSection { 250 public: 251 template<class CP> 252 ScopedCheckpointSection(CP &cp, const char *name) { 253 pushName(name); 254 nameOut(cp); 255 } 256 257 template<class CP> 258 ScopedCheckpointSection(CP &cp, const std::string &name) { 259 pushName(name.c_str()); 260 nameOut(cp); 261 } 262 263 ~ScopedCheckpointSection(); 264 265 ScopedCheckpointSection() = delete; 266 ScopedCheckpointSection(const ScopedCheckpointSection &) = delete; 267 ScopedCheckpointSection &operator=( 268 const ScopedCheckpointSection &) = delete; 269 ScopedCheckpointSection &operator=( 270 ScopedCheckpointSection &&) = delete; 271 272 private: 273 void pushName(const char *name); 274 void nameOut(CheckpointOut &cp); 275 void nameOut(CheckpointIn &cp) {}; 276 }; 277 278 public: 279 Serializable(); 280 virtual ~Serializable(); 281 282 /** 283 * Serialize an object 284 * 285 * Output an object's state into the current checkpoint section. 286 * 287 * @param cp Checkpoint state 288 */ 289 virtual void serialize(CheckpointOut &cp) const = 0; 290 291 /** 292 * Unserialize an object 293 * 294 * Read an object's state from the current checkpoint section. 295 * 296 * @param cp Checkpoint state 297 */ 298 virtual void unserialize(CheckpointIn &cp) = 0; 299 300 /** 301 * Serialize an object into a new section 302 * 303 * This method creates a new section in a checkpoint and calls 304 * serialize() to serialize the current object into that 305 * section. The name of the section is appended to the current 306 * checkpoint path. 307 * 308 * @param cp Checkpoint state 309 * @param name Name to append to the active path 310 */ 311 void serializeSection(CheckpointOut &cp, const char *name) const; 312 313 void serializeSection(CheckpointOut &cp, const std::string &name) const { 314 serializeSection(cp, name.c_str()); 315 } 316 317 /** 318 * Unserialize an a child object 319 * 320 * This method loads a child object from a checkpoint. The object 321 * name is appended to the active path to form a fully qualified 322 * section name and unserialize() is called. 323 * 324 * @param cp Checkpoint state 325 * @param name Name to append to the active path 326 */ 327 void unserializeSection(CheckpointIn &cp, const char *name); 328 329 void unserializeSection(CheckpointIn &cp, const std::string &name) { 330 unserializeSection(cp, name.c_str()); 331 } 332 333 /** 334 * @{ 335 * @name Legacy interface 336 * 337 * Interface for objects that insist on changing their state when 338 * serializing. Such state change should be done in drain(), 339 * memWriteback(), or memInvalidate() and not in the serialization 340 * method. In general, if state changes occur in serialize, it 341 * complicates testing since it breaks assumptions about draining 342 * and serialization. It potentially also makes components more 343 * fragile since they there are no ordering guarantees when 344 * serializing SimObjects. 345 * 346 * @warn This interface is considered deprecated and should never 347 * be used. 348 */ 349 350 virtual void serializeOld(CheckpointOut &cp) { 351 serialize(cp); 352 } 353 void serializeSectionOld(CheckpointOut &cp, const char *name); 354 void serializeSectionOld(CheckpointOut &cp, const std::string &name) { 355 serializeSectionOld(cp, name.c_str()); 356 } 357 /** @} */ 358 359 /** Get the fully-qualified name of the active section */ 360 static const std::string ¤tSection(); 361 362 static Serializable *create(CheckpointIn &cp, const std::string §ion); 363 364 static int ckptCount; 365 static int ckptMaxCount; 366 static int ckptPrevCount; 367 static void serializeAll(const std::string &cpt_dir); 368 static void unserializeGlobals(CheckpointIn &cp); 369 370 private: 371 static std::stack<std::string> path; 372}; 373 374void debug_serialize(const std::string &cpt_dir); 375 376// 377// A SerializableBuilder serves as an evaluation context for a set of 378// parameters that describe a specific instance of a Serializable. This 379// evaluation context corresponds to a section in the .ini file (as 380// with the base ParamContext) plus an optional node in the 381// configuration hierarchy (the configNode member) for resolving 382// Serializable references. SerializableBuilder is an abstract superclass; 383// derived classes specialize the class for particular subclasses of 384// Serializable (e.g., BaseCache). 385// 386// For typical usage, see the definition of 387// SerializableClass::createObject(). 388// 389class SerializableBuilder 390{ 391 public: 392 393 SerializableBuilder() {} 394 395 virtual ~SerializableBuilder() {} 396 397 // Create the actual Serializable corresponding to the parameter 398 // values in this context. This function is overridden in derived 399 // classes to call a specific constructor for a particular 400 // subclass of Serializable. 401 virtual Serializable *create() = 0; 402}; 403 404// 405// An instance of SerializableClass corresponds to a class derived from 406// Serializable. The SerializableClass instance serves to bind the string 407// name (found in the config file) to a function that creates an 408// instance of the appropriate derived class. 409// 410// This would be much cleaner in Smalltalk or Objective-C, where types 411// are first-class objects themselves. 412// 413class SerializableClass 414{ 415 public: 416 417 // Type CreateFunc is a pointer to a function that creates a new 418 // simulation object builder based on a .ini-file parameter 419 // section (specified by the first string argument), a unique name 420 // for the object (specified by the second string argument), and 421 // an optional config hierarchy node (specified by the third 422 // argument). A pointer to the new SerializableBuilder is returned. 423 typedef Serializable *(*CreateFunc)(CheckpointIn &cp, 424 const std::string §ion); 425 426 static std::map<std::string,CreateFunc> *classMap; 427 428 // Constructor. For example: 429 // 430 // SerializableClass baseCacheSerializableClass("BaseCacheSerializable", 431 // newBaseCacheSerializableBuilder); 432 // 433 SerializableClass(const std::string &className, CreateFunc createFunc); 434 435 // create Serializable given name of class and pointer to 436 // configuration hierarchy node 437 static Serializable *createObject(CheckpointIn &cp, 438 const std::string §ion); 439}; 440 441// 442// Macros to encapsulate the magic of declaring & defining 443// SerializableBuilder and SerializableClass objects 444// 445 446#define REGISTER_SERIALIZEABLE(CLASS_NAME, OBJ_CLASS) \ 447SerializableClass the##OBJ_CLASS##Class(CLASS_NAME, \ 448 OBJ_CLASS::createForUnserialize); 449 450// Base class to wrap object resolving functionality. This can be 451// provided to Checkpoint to allow it to map object names onto 452// object C++ objects in which to unserialize 453class SimObjectResolver 454{ 455 public: 456 virtual ~SimObjectResolver() { } 457 458 // Find a SimObject given a full path name 459 virtual SimObject *resolveSimObject(const std::string &name) = 0; 460}; 461 462class CheckpointIn 463{ 464 private: 465 466 IniFile *db; 467 468 SimObjectResolver &objNameResolver; 469 470 public: 471 CheckpointIn(const std::string &cpt_dir, SimObjectResolver &resolver); 472 ~CheckpointIn(); 473 474 const std::string cptDir; 475 476 bool find(const std::string §ion, const std::string &entry, 477 std::string &value); 478 479 bool findObj(const std::string §ion, const std::string &entry, 480 SimObject *&value); 481 482 bool sectionExists(const std::string §ion); 483 484 // The following static functions have to do with checkpoint 485 // creation rather than restoration. This class makes a handy 486 // namespace for them though. Currently no Checkpoint object is 487 // created on serialization (only unserialization) so we track the 488 // directory name as a global. It would be nice to change this 489 // someday 490 491 private: 492 // current directory we're serializing into. 493 static std::string currentDirectory; 494 495 public: 496 // Set the current directory. This function takes care of 497 // inserting curTick() if there's a '%d' in the argument, and 498 // appends a '/' if necessary. The final name is returned. 499 static std::string setDir(const std::string &base_name); 500 501 // Export current checkpoint directory name so other objects can 502 // derive filenames from it (e.g., memory). The return value is 503 // guaranteed to end in '/' so filenames can be directly appended. 504 // This function is only valid while a checkpoint is being created. 505 static std::string dir(); 506 507 // Filename for base checkpoint file within directory. 508 static const char *baseFilename; 509}; 510 511#endif // __SERIALIZE_HH__
| 191 192#define SERIALIZE_OBJPTR(objptr) paramOut(cp, #objptr, (objptr)->name()) 193 194#define UNSERIALIZE_OBJPTR(objptr) \ 195 do { \ 196 SimObject *sptr; \ 197 objParamIn(cp, #objptr, sptr); \ 198 fromSimObject(objptr, sptr); \ 199 } while (0) 200 201/** 202 * Basic support for object serialization. 203 * 204 * Objects that support serialization should derive from this 205 * class. Such objects can largely be divided into two categories: 1) 206 * True SimObjects (deriving from SimObject), and 2) child objects 207 * (non-SimObjects). 208 * 209 * SimObjects are serialized automatically into their own sections 210 * automatically by the SimObject base class (see 211 * SimObject::serializeAll(). 212 * 213 * SimObjects can contain other serializable objects that are not 214 * SimObjects. Much like normal serialized members are not serialized 215 * automatically, these objects will not be serialized automatically 216 * and it is expected that the objects owning such serializable 217 * objects call the required serialization/unserialization methods on 218 * child objects. The preferred method to serialize a child object is 219 * to call serializeSection() on the child, which serializes the 220 * object into a new subsection in the current section. Another option 221 * is to call serialize() directly, which serializes the object into 222 * the current section. The latter is not recommended as it can lead 223 * to naming clashes between objects. 224 * 225 * @note Many objects that support serialization need to be put in a 226 * consistent state when serialization takes place. We refer to the 227 * action of forcing an object into a consistent state as 228 * 'draining'. Objects that need draining inherit from Drainable. See 229 * Drainable for more information. 230 */ 231class Serializable 232{ 233 protected: 234 /** 235 * Scoped checkpoint section helper class 236 * 237 * This helper class creates a section within a checkpoint without 238 * the need for a separate serializeable object. It is mainly used 239 * within the Serializable class when serializing or unserializing 240 * section (see serializeSection() and unserializeSection()). It 241 * can also be used to maintain backwards compatibility in 242 * existing code that serializes structs that are not inheriting 243 * from Serializable into subsections. 244 * 245 * When the class is instantiated, it appends a name to the active 246 * path in a checkpoint. The old path is later restored when the 247 * instance is destroyed. For example, serializeSection() could be 248 * implemented by instantiating a ScopedCheckpointSection and then 249 * calling serialize() on an object. 250 */ 251 class ScopedCheckpointSection { 252 public: 253 template<class CP> 254 ScopedCheckpointSection(CP &cp, const char *name) { 255 pushName(name); 256 nameOut(cp); 257 } 258 259 template<class CP> 260 ScopedCheckpointSection(CP &cp, const std::string &name) { 261 pushName(name.c_str()); 262 nameOut(cp); 263 } 264 265 ~ScopedCheckpointSection(); 266 267 ScopedCheckpointSection() = delete; 268 ScopedCheckpointSection(const ScopedCheckpointSection &) = delete; 269 ScopedCheckpointSection &operator=( 270 const ScopedCheckpointSection &) = delete; 271 ScopedCheckpointSection &operator=( 272 ScopedCheckpointSection &&) = delete; 273 274 private: 275 void pushName(const char *name); 276 void nameOut(CheckpointOut &cp); 277 void nameOut(CheckpointIn &cp) {}; 278 }; 279 280 public: 281 Serializable(); 282 virtual ~Serializable(); 283 284 /** 285 * Serialize an object 286 * 287 * Output an object's state into the current checkpoint section. 288 * 289 * @param cp Checkpoint state 290 */ 291 virtual void serialize(CheckpointOut &cp) const = 0; 292 293 /** 294 * Unserialize an object 295 * 296 * Read an object's state from the current checkpoint section. 297 * 298 * @param cp Checkpoint state 299 */ 300 virtual void unserialize(CheckpointIn &cp) = 0; 301 302 /** 303 * Serialize an object into a new section 304 * 305 * This method creates a new section in a checkpoint and calls 306 * serialize() to serialize the current object into that 307 * section. The name of the section is appended to the current 308 * checkpoint path. 309 * 310 * @param cp Checkpoint state 311 * @param name Name to append to the active path 312 */ 313 void serializeSection(CheckpointOut &cp, const char *name) const; 314 315 void serializeSection(CheckpointOut &cp, const std::string &name) const { 316 serializeSection(cp, name.c_str()); 317 } 318 319 /** 320 * Unserialize an a child object 321 * 322 * This method loads a child object from a checkpoint. The object 323 * name is appended to the active path to form a fully qualified 324 * section name and unserialize() is called. 325 * 326 * @param cp Checkpoint state 327 * @param name Name to append to the active path 328 */ 329 void unserializeSection(CheckpointIn &cp, const char *name); 330 331 void unserializeSection(CheckpointIn &cp, const std::string &name) { 332 unserializeSection(cp, name.c_str()); 333 } 334 335 /** 336 * @{ 337 * @name Legacy interface 338 * 339 * Interface for objects that insist on changing their state when 340 * serializing. Such state change should be done in drain(), 341 * memWriteback(), or memInvalidate() and not in the serialization 342 * method. In general, if state changes occur in serialize, it 343 * complicates testing since it breaks assumptions about draining 344 * and serialization. It potentially also makes components more 345 * fragile since they there are no ordering guarantees when 346 * serializing SimObjects. 347 * 348 * @warn This interface is considered deprecated and should never 349 * be used. 350 */ 351 352 virtual void serializeOld(CheckpointOut &cp) { 353 serialize(cp); 354 } 355 void serializeSectionOld(CheckpointOut &cp, const char *name); 356 void serializeSectionOld(CheckpointOut &cp, const std::string &name) { 357 serializeSectionOld(cp, name.c_str()); 358 } 359 /** @} */ 360 361 /** Get the fully-qualified name of the active section */ 362 static const std::string ¤tSection(); 363 364 static Serializable *create(CheckpointIn &cp, const std::string §ion); 365 366 static int ckptCount; 367 static int ckptMaxCount; 368 static int ckptPrevCount; 369 static void serializeAll(const std::string &cpt_dir); 370 static void unserializeGlobals(CheckpointIn &cp); 371 372 private: 373 static std::stack<std::string> path; 374}; 375 376void debug_serialize(const std::string &cpt_dir); 377 378// 379// A SerializableBuilder serves as an evaluation context for a set of 380// parameters that describe a specific instance of a Serializable. This 381// evaluation context corresponds to a section in the .ini file (as 382// with the base ParamContext) plus an optional node in the 383// configuration hierarchy (the configNode member) for resolving 384// Serializable references. SerializableBuilder is an abstract superclass; 385// derived classes specialize the class for particular subclasses of 386// Serializable (e.g., BaseCache). 387// 388// For typical usage, see the definition of 389// SerializableClass::createObject(). 390// 391class SerializableBuilder 392{ 393 public: 394 395 SerializableBuilder() {} 396 397 virtual ~SerializableBuilder() {} 398 399 // Create the actual Serializable corresponding to the parameter 400 // values in this context. This function is overridden in derived 401 // classes to call a specific constructor for a particular 402 // subclass of Serializable. 403 virtual Serializable *create() = 0; 404}; 405 406// 407// An instance of SerializableClass corresponds to a class derived from 408// Serializable. The SerializableClass instance serves to bind the string 409// name (found in the config file) to a function that creates an 410// instance of the appropriate derived class. 411// 412// This would be much cleaner in Smalltalk or Objective-C, where types 413// are first-class objects themselves. 414// 415class SerializableClass 416{ 417 public: 418 419 // Type CreateFunc is a pointer to a function that creates a new 420 // simulation object builder based on a .ini-file parameter 421 // section (specified by the first string argument), a unique name 422 // for the object (specified by the second string argument), and 423 // an optional config hierarchy node (specified by the third 424 // argument). A pointer to the new SerializableBuilder is returned. 425 typedef Serializable *(*CreateFunc)(CheckpointIn &cp, 426 const std::string §ion); 427 428 static std::map<std::string,CreateFunc> *classMap; 429 430 // Constructor. For example: 431 // 432 // SerializableClass baseCacheSerializableClass("BaseCacheSerializable", 433 // newBaseCacheSerializableBuilder); 434 // 435 SerializableClass(const std::string &className, CreateFunc createFunc); 436 437 // create Serializable given name of class and pointer to 438 // configuration hierarchy node 439 static Serializable *createObject(CheckpointIn &cp, 440 const std::string §ion); 441}; 442 443// 444// Macros to encapsulate the magic of declaring & defining 445// SerializableBuilder and SerializableClass objects 446// 447 448#define REGISTER_SERIALIZEABLE(CLASS_NAME, OBJ_CLASS) \ 449SerializableClass the##OBJ_CLASS##Class(CLASS_NAME, \ 450 OBJ_CLASS::createForUnserialize); 451 452// Base class to wrap object resolving functionality. This can be 453// provided to Checkpoint to allow it to map object names onto 454// object C++ objects in which to unserialize 455class SimObjectResolver 456{ 457 public: 458 virtual ~SimObjectResolver() { } 459 460 // Find a SimObject given a full path name 461 virtual SimObject *resolveSimObject(const std::string &name) = 0; 462}; 463 464class CheckpointIn 465{ 466 private: 467 468 IniFile *db; 469 470 SimObjectResolver &objNameResolver; 471 472 public: 473 CheckpointIn(const std::string &cpt_dir, SimObjectResolver &resolver); 474 ~CheckpointIn(); 475 476 const std::string cptDir; 477 478 bool find(const std::string §ion, const std::string &entry, 479 std::string &value); 480 481 bool findObj(const std::string §ion, const std::string &entry, 482 SimObject *&value); 483 484 bool sectionExists(const std::string §ion); 485 486 // The following static functions have to do with checkpoint 487 // creation rather than restoration. This class makes a handy 488 // namespace for them though. Currently no Checkpoint object is 489 // created on serialization (only unserialization) so we track the 490 // directory name as a global. It would be nice to change this 491 // someday 492 493 private: 494 // current directory we're serializing into. 495 static std::string currentDirectory; 496 497 public: 498 // Set the current directory. This function takes care of 499 // inserting curTick() if there's a '%d' in the argument, and 500 // appends a '/' if necessary. The final name is returned. 501 static std::string setDir(const std::string &base_name); 502 503 // Export current checkpoint directory name so other objects can 504 // derive filenames from it (e.g., memory). The return value is 505 // guaranteed to end in '/' so filenames can be directly appended. 506 // This function is only valid while a checkpoint is being created. 507 static std::string dir(); 508 509 // Filename for base checkpoint file within directory. 510 static const char *baseFilename; 511}; 512 513#endif // __SERIALIZE_HH__
|