1# Copyright (c) 2005 The Regents of The University of Michigan
2# All rights reserved.
3#
4# Redistribution and use in source and binary forms, with or without
5# modification, are permitted provided that the following conditions are
6# met: redistributions of source code must retain the above copyright
7# notice, this list of conditions and the following disclaimer;
8# redistributions in binary form must reproduce the above copyright
9# notice, this list of conditions and the following disclaimer in the
10# documentation and/or other materials provided with the distribution;
11# neither the name of the copyright holders nor the names of its
12# contributors may be used to endorse or promote products derived from
13# this software without specific prior written permission.
14#
15# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
16# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
17# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
18# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
19# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
20# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
21# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
25# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26#
27# Authors: Nathan Binkert
28
29# metric prefixes
30exa = 1.0e18
31peta = 1.0e15
32tera = 1.0e12
33giga = 1.0e9
34mega = 1.0e6
35kilo = 1.0e3
36
37milli = 1.0e-3
38micro = 1.0e-6
39nano = 1.0e-9
40pico = 1.0e-12
41femto = 1.0e-15
42atto = 1.0e-18
43
44# power of 2 prefixes
45kibi = 1024
46mebi = kibi * 1024
47gibi = mebi * 1024
48tebi = gibi * 1024
49pebi = tebi * 1024
50exbi = pebi * 1024
51
52# memory size configuration stuff
53def toFloat(value):
54 if not isinstance(value, str):
55 raise TypeError, "wrong type '%s' should be str" % type(value)
56
57 if value.endswith('Ei'):
58 return float(value[:-2]) * exbi
59 elif value.endswith('Pi'):
60 return float(value[:-2]) * pebi
61 elif value.endswith('Ti'):
62 return float(value[:-2]) * tebi
63 elif value.endswith('Gi'):
64 return float(value[:-2]) * gibi
65 elif value.endswith('Mi'):
66 return float(value[:-2]) * mebi
67 elif value.endswith('ki'):
68 return float(value[:-2]) * kibi
69 elif value.endswith('E'):
70 return float(value[:-1]) * exa
71 elif value.endswith('P'):
72 return float(value[:-1]) * peta
73 elif value.endswith('T'):
74 return float(value[:-1]) * tera
75 elif value.endswith('G'):
76 return float(value[:-1]) * giga
77 elif value.endswith('M'):
78 return float(value[:-1]) * mega
79 elif value.endswith('k'):
80 return float(value[:-1]) * kilo
81 elif value.endswith('m'):
82 return float(value[:-1]) * milli
83 elif value.endswith('u'):
84 return float(value[:-1]) * micro
85 elif value.endswith('n'):
86 return float(value[:-1]) * nano
87 elif value.endswith('p'):
88 return float(value[:-1]) * pico
89 elif value.endswith('f'):
90 return float(value[:-1]) * femto
91 else:
92 return float(value)
93
94def toInteger(value):
95 value = toFloat(value)
96 result = long(value)
97 if value != result:
98 raise ValueError, "cannot convert '%s' to integer" % value
99
100 return result
101
102_bool_dict = {
103 'true' : True, 't' : True, 'yes' : True, 'y' : True, '1' : True,
104 'false' : False, 'f' : False, 'no' : False, 'n' : False, '0' : False
105 }
106
107def toBool(value):
108 if not isinstance(value, str):
109 raise TypeError, "wrong type '%s' should be str" % type(value)
110
111 value = value.lower()
112 result = _bool_dict.get(value, None)
113 if result == None:
114 raise ValueError, "cannot convert '%s' to bool" % value
115 return result
116
117def toFrequency(value):
118 if not isinstance(value, str):
119 raise TypeError, "wrong type '%s' should be str" % type(value)
120
121 if value.endswith('THz'):
122 return float(value[:-3]) * tera
123 elif value.endswith('GHz'):
124 return float(value[:-3]) * giga
125 elif value.endswith('MHz'):
126 return float(value[:-3]) * mega
127 elif value.endswith('kHz'):
128 return float(value[:-3]) * kilo
129 elif value.endswith('Hz'):
130 return float(value[:-2])
131
132 raise ValueError, "cannot convert '%s' to frequency" % value
133
134def toLatency(value):
135 if not isinstance(value, str):
136 raise TypeError, "wrong type '%s' should be str" % type(value)
137
138 if value.endswith('ps'):
139 return float(value[:-2]) * pico
140 elif value.endswith('ns'):
141 return float(value[:-2]) * nano
142 elif value.endswith('us'):
143 return float(value[:-2]) * micro
144 elif value.endswith('ms'):
145 return float(value[:-2]) * milli
146 elif value.endswith('s'):
147 return float(value[:-1])
148
149 raise ValueError, "cannot convert '%s' to latency" % value
150
151def anyToLatency(value):
152 """result is a clock period"""
153
154 if not isinstance(value, str):
155 raise TypeError, "wrong type '%s' should be str" % type(value)
156
157 try:
158 val = toFrequency(value)
159 if val != 0:
160 val = 1 / val
161 return val
162 except ValueError:
163 pass
164
165 try:
166 val = toLatency(value)
167 return val
168 except ValueError:
169 pass
170
171 raise ValueError, "cannot convert '%s' to clock period" % value
172
173def anyToFrequency(value):
174 """result is a clock period"""
175
176 if not isinstance(value, str):
177 raise TypeError, "wrong type '%s' should be str" % type(value)
178
179 try:
180 val = toFrequency(value)
181 return val
182 except ValueError:
183 pass
184
185 try:
186 val = toLatency(value)
187 if val != 0:
188 val = 1 / val
189 return val
190 except ValueError:
191 pass
192
193 raise ValueError, "cannot convert '%s' to clock period" % value
194
195def toNetworkBandwidth(value):
196 if not isinstance(value, str):
197 raise TypeError, "wrong type '%s' should be str" % type(value)
198
199 if value.endswith('Tbps'):
200 return float(value[:-4]) * tera
201 elif value.endswith('Gbps'):
202 return float(value[:-4]) * giga
203 elif value.endswith('Mbps'):
204 return float(value[:-4]) * mega
205 elif value.endswith('kbps'):
206 return float(value[:-4]) * kilo
207 elif value.endswith('bps'):
208 return float(value[:-3])
209 else:
210 return float(value)
211
212 raise ValueError, "cannot convert '%s' to network bandwidth" % value
213
214def toMemoryBandwidth(value):
215 if not isinstance(value, str):
216 raise TypeError, "wrong type '%s' should be str" % type(value)
217
218 if value.endswith('PB/s'):
219 return float(value[:-4]) * pebi
220 elif value.endswith('TB/s'):
221 return float(value[:-4]) * tebi
222 elif value.endswith('GB/s'):
223 return float(value[:-4]) * gibi
224 elif value.endswith('MB/s'):
225 return float(value[:-4]) * mebi
226 elif value.endswith('kB/s'):
227 return float(value[:-4]) * kibi
228 elif value.endswith('B/s'):
229 return float(value[:-3])
230
231 raise ValueError, "cannot convert '%s' to memory bandwidth" % value
232
233def toMemorySize(value):
234 if not isinstance(value, str):
235 raise TypeError, "wrong type '%s' should be str" % type(value)
236
237 if value.endswith('PB'):
238 return long(value[:-2]) * pebi
239 elif value.endswith('TB'):
240 return long(value[:-2]) * tebi
241 elif value.endswith('GB'):
242 return long(value[:-2]) * gibi
243 elif value.endswith('MB'):
244 return long(value[:-2]) * mebi
245 elif value.endswith('kB'):
246 return long(value[:-2]) * kibi
247 elif value.endswith('B'):
248 return long(value[:-1])
249
250 raise ValueError, "cannot convert '%s' to memory size" % value
| 1# Copyright (c) 2005 The Regents of The University of Michigan
2# All rights reserved.
3#
4# Redistribution and use in source and binary forms, with or without
5# modification, are permitted provided that the following conditions are
6# met: redistributions of source code must retain the above copyright
7# notice, this list of conditions and the following disclaimer;
8# redistributions in binary form must reproduce the above copyright
9# notice, this list of conditions and the following disclaimer in the
10# documentation and/or other materials provided with the distribution;
11# neither the name of the copyright holders nor the names of its
12# contributors may be used to endorse or promote products derived from
13# this software without specific prior written permission.
14#
15# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
16# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
17# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
18# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
19# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
20# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
21# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
25# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26#
27# Authors: Nathan Binkert
28
29# metric prefixes
30exa = 1.0e18
31peta = 1.0e15
32tera = 1.0e12
33giga = 1.0e9
34mega = 1.0e6
35kilo = 1.0e3
36
37milli = 1.0e-3
38micro = 1.0e-6
39nano = 1.0e-9
40pico = 1.0e-12
41femto = 1.0e-15
42atto = 1.0e-18
43
44# power of 2 prefixes
45kibi = 1024
46mebi = kibi * 1024
47gibi = mebi * 1024
48tebi = gibi * 1024
49pebi = tebi * 1024
50exbi = pebi * 1024
51
52# memory size configuration stuff
53def toFloat(value):
54 if not isinstance(value, str):
55 raise TypeError, "wrong type '%s' should be str" % type(value)
56
57 if value.endswith('Ei'):
58 return float(value[:-2]) * exbi
59 elif value.endswith('Pi'):
60 return float(value[:-2]) * pebi
61 elif value.endswith('Ti'):
62 return float(value[:-2]) * tebi
63 elif value.endswith('Gi'):
64 return float(value[:-2]) * gibi
65 elif value.endswith('Mi'):
66 return float(value[:-2]) * mebi
67 elif value.endswith('ki'):
68 return float(value[:-2]) * kibi
69 elif value.endswith('E'):
70 return float(value[:-1]) * exa
71 elif value.endswith('P'):
72 return float(value[:-1]) * peta
73 elif value.endswith('T'):
74 return float(value[:-1]) * tera
75 elif value.endswith('G'):
76 return float(value[:-1]) * giga
77 elif value.endswith('M'):
78 return float(value[:-1]) * mega
79 elif value.endswith('k'):
80 return float(value[:-1]) * kilo
81 elif value.endswith('m'):
82 return float(value[:-1]) * milli
83 elif value.endswith('u'):
84 return float(value[:-1]) * micro
85 elif value.endswith('n'):
86 return float(value[:-1]) * nano
87 elif value.endswith('p'):
88 return float(value[:-1]) * pico
89 elif value.endswith('f'):
90 return float(value[:-1]) * femto
91 else:
92 return float(value)
93
94def toInteger(value):
95 value = toFloat(value)
96 result = long(value)
97 if value != result:
98 raise ValueError, "cannot convert '%s' to integer" % value
99
100 return result
101
102_bool_dict = {
103 'true' : True, 't' : True, 'yes' : True, 'y' : True, '1' : True,
104 'false' : False, 'f' : False, 'no' : False, 'n' : False, '0' : False
105 }
106
107def toBool(value):
108 if not isinstance(value, str):
109 raise TypeError, "wrong type '%s' should be str" % type(value)
110
111 value = value.lower()
112 result = _bool_dict.get(value, None)
113 if result == None:
114 raise ValueError, "cannot convert '%s' to bool" % value
115 return result
116
117def toFrequency(value):
118 if not isinstance(value, str):
119 raise TypeError, "wrong type '%s' should be str" % type(value)
120
121 if value.endswith('THz'):
122 return float(value[:-3]) * tera
123 elif value.endswith('GHz'):
124 return float(value[:-3]) * giga
125 elif value.endswith('MHz'):
126 return float(value[:-3]) * mega
127 elif value.endswith('kHz'):
128 return float(value[:-3]) * kilo
129 elif value.endswith('Hz'):
130 return float(value[:-2])
131
132 raise ValueError, "cannot convert '%s' to frequency" % value
133
134def toLatency(value):
135 if not isinstance(value, str):
136 raise TypeError, "wrong type '%s' should be str" % type(value)
137
138 if value.endswith('ps'):
139 return float(value[:-2]) * pico
140 elif value.endswith('ns'):
141 return float(value[:-2]) * nano
142 elif value.endswith('us'):
143 return float(value[:-2]) * micro
144 elif value.endswith('ms'):
145 return float(value[:-2]) * milli
146 elif value.endswith('s'):
147 return float(value[:-1])
148
149 raise ValueError, "cannot convert '%s' to latency" % value
150
151def anyToLatency(value):
152 """result is a clock period"""
153
154 if not isinstance(value, str):
155 raise TypeError, "wrong type '%s' should be str" % type(value)
156
157 try:
158 val = toFrequency(value)
159 if val != 0:
160 val = 1 / val
161 return val
162 except ValueError:
163 pass
164
165 try:
166 val = toLatency(value)
167 return val
168 except ValueError:
169 pass
170
171 raise ValueError, "cannot convert '%s' to clock period" % value
172
173def anyToFrequency(value):
174 """result is a clock period"""
175
176 if not isinstance(value, str):
177 raise TypeError, "wrong type '%s' should be str" % type(value)
178
179 try:
180 val = toFrequency(value)
181 return val
182 except ValueError:
183 pass
184
185 try:
186 val = toLatency(value)
187 if val != 0:
188 val = 1 / val
189 return val
190 except ValueError:
191 pass
192
193 raise ValueError, "cannot convert '%s' to clock period" % value
194
195def toNetworkBandwidth(value):
196 if not isinstance(value, str):
197 raise TypeError, "wrong type '%s' should be str" % type(value)
198
199 if value.endswith('Tbps'):
200 return float(value[:-4]) * tera
201 elif value.endswith('Gbps'):
202 return float(value[:-4]) * giga
203 elif value.endswith('Mbps'):
204 return float(value[:-4]) * mega
205 elif value.endswith('kbps'):
206 return float(value[:-4]) * kilo
207 elif value.endswith('bps'):
208 return float(value[:-3])
209 else:
210 return float(value)
211
212 raise ValueError, "cannot convert '%s' to network bandwidth" % value
213
214def toMemoryBandwidth(value):
215 if not isinstance(value, str):
216 raise TypeError, "wrong type '%s' should be str" % type(value)
217
218 if value.endswith('PB/s'):
219 return float(value[:-4]) * pebi
220 elif value.endswith('TB/s'):
221 return float(value[:-4]) * tebi
222 elif value.endswith('GB/s'):
223 return float(value[:-4]) * gibi
224 elif value.endswith('MB/s'):
225 return float(value[:-4]) * mebi
226 elif value.endswith('kB/s'):
227 return float(value[:-4]) * kibi
228 elif value.endswith('B/s'):
229 return float(value[:-3])
230
231 raise ValueError, "cannot convert '%s' to memory bandwidth" % value
232
233def toMemorySize(value):
234 if not isinstance(value, str):
235 raise TypeError, "wrong type '%s' should be str" % type(value)
236
237 if value.endswith('PB'):
238 return long(value[:-2]) * pebi
239 elif value.endswith('TB'):
240 return long(value[:-2]) * tebi
241 elif value.endswith('GB'):
242 return long(value[:-2]) * gibi
243 elif value.endswith('MB'):
244 return long(value[:-2]) * mebi
245 elif value.endswith('kB'):
246 return long(value[:-2]) * kibi
247 elif value.endswith('B'):
248 return long(value[:-1])
249
250 raise ValueError, "cannot convert '%s' to memory size" % value
|