tport.cc (3284:917750443a75) tport.cc (3296:58498b71afd8)
1/*
2 * Copyright (c) 2006 The Regents of The University of Michigan
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions are
7 * met: redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer;
9 * redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution;
12 * neither the name of the copyright holders nor the names of its
13 * contributors may be used to endorse or promote products derived from
14 * this software without specific prior written permission.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 *
28 * Authors: Ali Saidi
29 */
30
31#include "mem/tport.hh"
32
33void
34SimpleTimingPort::recvFunctional(Packet *pkt)
35{
36 //First check queued events
37 std::list<Packet *>::iterator i = transmitList.begin();
38 std::list<Packet *>::iterator end = transmitList.end();
1/*
2 * Copyright (c) 2006 The Regents of The University of Michigan
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions are
7 * met: redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer;
9 * redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution;
12 * neither the name of the copyright holders nor the names of its
13 * contributors may be used to endorse or promote products derived from
14 * this software without specific prior written permission.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 *
28 * Authors: Ali Saidi
29 */
30
31#include "mem/tport.hh"
32
33void
34SimpleTimingPort::recvFunctional(Packet *pkt)
35{
36 //First check queued events
37 std::list<Packet *>::iterator i = transmitList.begin();
38 std::list<Packet *>::iterator end = transmitList.end();
39 for (; i != end; ++i) {
39 bool cont = true;
40
41 while (i != end && cont) {
40 Packet * target = *i;
41 // If the target contains data, and it overlaps the
42 // probed request, need to update data
42 Packet * target = *i;
43 // If the target contains data, and it overlaps the
44 // probed request, need to update data
43 if (target->intersect(pkt)) {
44 uint8_t* pkt_data;
45 uint8_t* write_data;
46 int data_size;
47 if (target->getAddr() < pkt->getAddr()) {
48 int offset = pkt->getAddr() - target->getAddr();
49 pkt_data = pkt->getPtr<uint8_t>();
50 write_data = target->getPtr<uint8_t>() + offset;
51 data_size = target->getSize() - offset;
52 assert(data_size > 0);
53 if (data_size > pkt->getSize())
54 data_size = pkt->getSize();
55 } else {
56 int offset = target->getAddr() - pkt->getAddr();
57 pkt_data = pkt->getPtr<uint8_t>() + offset;
58 write_data = target->getPtr<uint8_t>();
59 data_size = pkt->getSize() - offset;
60 assert(data_size > pkt->getSize());
61 if (data_size > target->getSize())
62 data_size = target->getSize();
63 }
45 if (target->intersect(pkt))
46 fixPacket(pkt, target);
64
47
65 if (pkt->isWrite()) {
66 memcpy(pkt_data, write_data, data_size);
67 } else {
68 memcpy(write_data, pkt_data, data_size);
69 }
70 }
71 }
72 //Then just do an atomic access and throw away the returned latency
48 }
49 //Then just do an atomic access and throw away the returned latency
73 recvAtomic(pkt);
50 if (cont)
51 recvAtomic(pkt);
74}
75
76bool
77SimpleTimingPort::recvTiming(Packet *pkt)
78{
79 // If the device is only a slave, it should only be sending
80 // responses, which should never get nacked. There used to be
81 // code to hanldle nacks here, but I'm pretty sure it didn't work
82 // correctly with the drain code, so that would need to be fixed
83 // if we ever added it back.
84 assert(pkt->result != Packet::Nacked);
85 Tick latency = recvAtomic(pkt);
86 // turn packet around to go back to requester if response expected
87 if (pkt->needsResponse()) {
88 pkt->makeTimingResponse();
89 sendTimingLater(pkt, latency);
90 }
91 return true;
92}
93
94void
95SimpleTimingPort::recvRetry()
96{
97 assert(outTiming > 0);
98 assert(!transmitList.empty());
99 if (sendTiming(transmitList.front())) {
100 transmitList.pop_front();
101 outTiming--;
102 DPRINTF(Bus, "No Longer waiting on retry\n");
103 if (!transmitList.empty())
104 sendTimingLater(transmitList.front(), 1);
105 }
106
107 if (transmitList.empty() && drainEvent) {
108 drainEvent->process();
109 drainEvent = NULL;
110 }
111}
112
113void
114SimpleTimingPort::SendEvent::process()
115{
116 assert(port->outTiming > 0);
117 if (!port->transmitList.empty() && port->transmitList.front() != packet) {
118 //We are not the head of the list
119 port->transmitList.push_back(packet);
120 } else if (port->sendTiming(packet)) {
121 // send successful
122 if (port->transmitList.size()) {
123 port->transmitList.pop_front();
124 port->outTiming--;
125 if (!port->transmitList.empty())
126 port->sendTimingLater(port->transmitList.front(), 1);
127 }
128 if (port->transmitList.empty() && port->drainEvent) {
129 port->drainEvent->process();
130 port->drainEvent = NULL;
131 }
132 } else {
133 // send unsuccessful (due to flow control). Will get retry
134 // callback later; save for then if not already
135 DPRINTF(Bus, "Waiting on retry\n");
136 if (!(port->transmitList.front() == packet))
137 port->transmitList.push_back(packet);
138 }
139}
140
141
142unsigned int
143SimpleTimingPort::drain(Event *de)
144{
145 if (outTiming == 0 && transmitList.size() == 0)
146 return 0;
147 drainEvent = de;
148 return 1;
149}
52}
53
54bool
55SimpleTimingPort::recvTiming(Packet *pkt)
56{
57 // If the device is only a slave, it should only be sending
58 // responses, which should never get nacked. There used to be
59 // code to hanldle nacks here, but I'm pretty sure it didn't work
60 // correctly with the drain code, so that would need to be fixed
61 // if we ever added it back.
62 assert(pkt->result != Packet::Nacked);
63 Tick latency = recvAtomic(pkt);
64 // turn packet around to go back to requester if response expected
65 if (pkt->needsResponse()) {
66 pkt->makeTimingResponse();
67 sendTimingLater(pkt, latency);
68 }
69 return true;
70}
71
72void
73SimpleTimingPort::recvRetry()
74{
75 assert(outTiming > 0);
76 assert(!transmitList.empty());
77 if (sendTiming(transmitList.front())) {
78 transmitList.pop_front();
79 outTiming--;
80 DPRINTF(Bus, "No Longer waiting on retry\n");
81 if (!transmitList.empty())
82 sendTimingLater(transmitList.front(), 1);
83 }
84
85 if (transmitList.empty() && drainEvent) {
86 drainEvent->process();
87 drainEvent = NULL;
88 }
89}
90
91void
92SimpleTimingPort::SendEvent::process()
93{
94 assert(port->outTiming > 0);
95 if (!port->transmitList.empty() && port->transmitList.front() != packet) {
96 //We are not the head of the list
97 port->transmitList.push_back(packet);
98 } else if (port->sendTiming(packet)) {
99 // send successful
100 if (port->transmitList.size()) {
101 port->transmitList.pop_front();
102 port->outTiming--;
103 if (!port->transmitList.empty())
104 port->sendTimingLater(port->transmitList.front(), 1);
105 }
106 if (port->transmitList.empty() && port->drainEvent) {
107 port->drainEvent->process();
108 port->drainEvent = NULL;
109 }
110 } else {
111 // send unsuccessful (due to flow control). Will get retry
112 // callback later; save for then if not already
113 DPRINTF(Bus, "Waiting on retry\n");
114 if (!(port->transmitList.front() == packet))
115 port->transmitList.push_back(packet);
116 }
117}
118
119
120unsigned int
121SimpleTimingPort::drain(Event *de)
122{
123 if (outTiming == 0 && transmitList.size() == 0)
124 return 0;
125 drainEvent = de;
126 return 1;
127}