1# Copyright (c) 1999-2008 Mark D. Hill and David A. Wood
2# Copyright (c) 2009 The Hewlett-Packard Development Company
3# All rights reserved.
4#
5# Redistribution and use in source and binary forms, with or without
6# modification, are permitted provided that the following conditions are
7# met: redistributions of source code must retain the above copyright
8# notice, this list of conditions and the following disclaimer;
9# redistributions in binary form must reproduce the above copyright
10# notice, this list of conditions and the following disclaimer in the
11# documentation and/or other materials provided with the distribution;
12# neither the name of the copyright holders nor the names of its
13# contributors may be used to endorse or promote products derived from
14# this software without specific prior written permission.
15#
16# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27
28from slicc.ast.ExprAST import ExprAST
29from slicc.symbols import Type
30
31class InfixOperatorExprAST(ExprAST):
32 def __init__(self, slicc, left, op, right):
33 super(InfixOperatorExprAST, self).__init__(slicc)
34
35 self.left = left
36 self.op = op
37 self.right = right
38
39 def __repr__(self):
40 return "[InfixExpr: %r %s %r]" % (self.left, self.op, self.right)
41
42 def generate(self, code):
43 lcode = self.slicc.codeFormatter()
44 rcode = self.slicc.codeFormatter()
45
46 ltype = self.left.generate(lcode)
47 rtype = self.right.generate(rcode)
48
49 # Figure out what the input and output types should be
50 if self.op in ("==", "!=", ">=", "<=", ">", "<"):
51 output = "bool"
52 if (ltype != rtype):
53 self.error("Type mismatch: left and right operands of " +
54 "operator '%s' must be the same type. " +
55 "left: '%s', right: '%s'",
56 self.op, ltype, rtype)
57 else:
58 expected_types = []
59 output = None
60
61 if self.op in ("&&", "||"):
62 # boolean inputs and output
63 expected_types = [("bool", "bool", "bool")]
64 elif self.op in ("<<", ">>"):
65 expected_types = [("int", "int", "int"),
66 ("Cycles", "int", "Cycles")]
67 elif self.op in ("+", "-", "*", "/"):
68 expected_types = [("int", "int", "int"),
69 ("Cycles", "Cycles", "Cycles"),
70 ("Cycles", "int", "Cycles"),
71 ("Scalar", "int", "Scalar"),
72 ("int", "bool", "int"),
73 ("bool", "int", "int"),
74 ("int", "Cycles", "Cycles")]
75 else:
76 self.error("No operator matched with {0}!" .format(self.op))
77
78 for expected_type in expected_types:
79 left_input_type = self.symtab.find(expected_type[0], Type)
80 right_input_type = self.symtab.find(expected_type[1], Type)
81
82 if (left_input_type == ltype) and (right_input_type == rtype):
83 output = expected_type[2]
84
85 if output == None:
86 self.error("Type mismatch: operands ({0}, {1}) for operator " \
87 "'{2}' failed to match with the expected types" .
88 format(ltype, rtype, self.op))
89
90 # All is well
91 fix = code.nofix()
92 code("($lcode ${{self.op}} $rcode)")
93 code.fix(fix)
94 return self.symtab.find(output, Type)
95
96class PrefixOperatorExprAST(ExprAST):
97 def __init__(self, slicc, op, operand):
98 super(PrefixOperatorExprAST, self).__init__(slicc)
99
100 self.op = op
101 self.operand = operand
102
103 def __repr__(self):
104 return "[PrefixExpr: %s %r]" % (self.op, self.operand)
105
106 def generate(self, code):
107 opcode = self.slicc.codeFormatter()
108 optype = self.operand.generate(opcode)
109
| 1# Copyright (c) 1999-2008 Mark D. Hill and David A. Wood
2# Copyright (c) 2009 The Hewlett-Packard Development Company
3# All rights reserved.
4#
5# Redistribution and use in source and binary forms, with or without
6# modification, are permitted provided that the following conditions are
7# met: redistributions of source code must retain the above copyright
8# notice, this list of conditions and the following disclaimer;
9# redistributions in binary form must reproduce the above copyright
10# notice, this list of conditions and the following disclaimer in the
11# documentation and/or other materials provided with the distribution;
12# neither the name of the copyright holders nor the names of its
13# contributors may be used to endorse or promote products derived from
14# this software without specific prior written permission.
15#
16# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27
28from slicc.ast.ExprAST import ExprAST
29from slicc.symbols import Type
30
31class InfixOperatorExprAST(ExprAST):
32 def __init__(self, slicc, left, op, right):
33 super(InfixOperatorExprAST, self).__init__(slicc)
34
35 self.left = left
36 self.op = op
37 self.right = right
38
39 def __repr__(self):
40 return "[InfixExpr: %r %s %r]" % (self.left, self.op, self.right)
41
42 def generate(self, code):
43 lcode = self.slicc.codeFormatter()
44 rcode = self.slicc.codeFormatter()
45
46 ltype = self.left.generate(lcode)
47 rtype = self.right.generate(rcode)
48
49 # Figure out what the input and output types should be
50 if self.op in ("==", "!=", ">=", "<=", ">", "<"):
51 output = "bool"
52 if (ltype != rtype):
53 self.error("Type mismatch: left and right operands of " +
54 "operator '%s' must be the same type. " +
55 "left: '%s', right: '%s'",
56 self.op, ltype, rtype)
57 else:
58 expected_types = []
59 output = None
60
61 if self.op in ("&&", "||"):
62 # boolean inputs and output
63 expected_types = [("bool", "bool", "bool")]
64 elif self.op in ("<<", ">>"):
65 expected_types = [("int", "int", "int"),
66 ("Cycles", "int", "Cycles")]
67 elif self.op in ("+", "-", "*", "/"):
68 expected_types = [("int", "int", "int"),
69 ("Cycles", "Cycles", "Cycles"),
70 ("Cycles", "int", "Cycles"),
71 ("Scalar", "int", "Scalar"),
72 ("int", "bool", "int"),
73 ("bool", "int", "int"),
74 ("int", "Cycles", "Cycles")]
75 else:
76 self.error("No operator matched with {0}!" .format(self.op))
77
78 for expected_type in expected_types:
79 left_input_type = self.symtab.find(expected_type[0], Type)
80 right_input_type = self.symtab.find(expected_type[1], Type)
81
82 if (left_input_type == ltype) and (right_input_type == rtype):
83 output = expected_type[2]
84
85 if output == None:
86 self.error("Type mismatch: operands ({0}, {1}) for operator " \
87 "'{2}' failed to match with the expected types" .
88 format(ltype, rtype, self.op))
89
90 # All is well
91 fix = code.nofix()
92 code("($lcode ${{self.op}} $rcode)")
93 code.fix(fix)
94 return self.symtab.find(output, Type)
95
96class PrefixOperatorExprAST(ExprAST):
97 def __init__(self, slicc, op, operand):
98 super(PrefixOperatorExprAST, self).__init__(slicc)
99
100 self.op = op
101 self.operand = operand
102
103 def __repr__(self):
104 return "[PrefixExpr: %s %r]" % (self.op, self.operand)
105
106 def generate(self, code):
107 opcode = self.slicc.codeFormatter()
108 optype = self.operand.generate(opcode)
109
|