1/*
|
2 * Copyright (c) 2012 ARM Limited
|
2 * Copyright (c) 2012-2013 ARM Limited |
3 * All rights reserved 4 * 5 * The license below extends only to copyright in the software and shall 6 * not be construed as granting a license to any other intellectual 7 * property including but not limited to intellectual property relating 8 * to a hardware implementation of the functionality of the software 9 * licensed hereunder. You may use the software subject to the license 10 * terms below provided that you ensure that this notice is replicated 11 * unmodified and in its entirety in all distributions of the software, 12 * modified or unmodified, in source code or in binary form. 13 * 14 * Copyright (c) 2006 The Regents of The University of Michigan 15 * Copyright (c) 2010 Advanced Micro Devices, Inc. 16 * All rights reserved. 17 * 18 * Redistribution and use in source and binary forms, with or without 19 * modification, are permitted provided that the following conditions are 20 * met: redistributions of source code must retain the above copyright 21 * notice, this list of conditions and the following disclaimer; 22 * redistributions in binary form must reproduce the above copyright 23 * notice, this list of conditions and the following disclaimer in the 24 * documentation and/or other materials provided with the distribution; 25 * neither the name of the copyright holders nor the names of its 26 * contributors may be used to endorse or promote products derived from 27 * this software without specific prior written permission. 28 * 29 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 30 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 31 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 32 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 33 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 34 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 35 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 36 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 37 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 38 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 39 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 40 * 41 * Authors: Ron Dreslinski 42 * Steve Reinhardt 43 * Ali Saidi 44 * Andreas Hansson 45 */ 46 47/** 48 * @file 49 * Declaration of the Packet class. 50 */ 51 52#ifndef __MEM_PACKET_HH__ 53#define __MEM_PACKET_HH__ 54 55#include <bitset> 56#include <cassert> 57#include <list> 58 59#include "base/cast.hh" 60#include "base/compiler.hh" 61#include "base/flags.hh" 62#include "base/misc.hh" 63#include "base/printable.hh" 64#include "base/types.hh" 65#include "mem/request.hh" 66#include "sim/core.hh" 67 68class Packet; 69typedef Packet *PacketPtr; 70typedef uint8_t* PacketDataPtr; 71typedef std::list<PacketPtr> PacketList; 72 73class MemCmd 74{ 75 friend class Packet; 76 77 public: 78 /** 79 * List of all commands associated with a packet. 80 */ 81 enum Command 82 { 83 InvalidCmd, 84 ReadReq, 85 ReadResp, 86 ReadRespWithInvalidate, 87 WriteReq, 88 WriteResp, 89 Writeback, 90 SoftPFReq, 91 HardPFReq, 92 SoftPFResp, 93 HardPFResp, 94 // WriteInvalidateReq transactions used to be generated by the 95 // DMA ports when writing full blocks to memory, however, it 96 // is not used anymore since we put the I/O cache in place to 97 // deal with partial block writes. Hence, WriteInvalidateReq 98 // and WriteInvalidateResp are currently unused. The 99 // implication is that the I/O cache does read-exclusive 100 // operations on every full-cache-block DMA, and ultimately 101 // this needs to be fixed. 102 WriteInvalidateReq, 103 WriteInvalidateResp, 104 UpgradeReq, 105 SCUpgradeReq, // Special "weak" upgrade for StoreCond 106 UpgradeResp, 107 SCUpgradeFailReq, // Failed SCUpgradeReq in MSHR (never sent) 108 UpgradeFailResp, // Valid for SCUpgradeReq only 109 ReadExReq, 110 ReadExResp, 111 LoadLockedReq, 112 StoreCondReq, 113 StoreCondFailReq, // Failed StoreCondReq in MSHR (never sent) 114 StoreCondResp, 115 SwapReq, 116 SwapResp, 117 MessageReq, 118 MessageResp, 119 // Error responses 120 // @TODO these should be classified as responses rather than 121 // requests; coding them as requests initially for backwards 122 // compatibility 123 InvalidDestError, // packet dest field invalid 124 BadAddressError, // memory address invalid 125 FunctionalReadError, // unable to fulfill functional read 126 FunctionalWriteError, // unable to fulfill functional write 127 // Fake simulator-only commands 128 PrintReq, // Print state matching address 129 FlushReq, //request for a cache flush 130 InvalidationReq, // request for address to be invalidated from lsq 131 NUM_MEM_CMDS 132 }; 133 134 private: 135 /** 136 * List of command attributes. 137 */ 138 enum Attribute 139 { 140 IsRead, //!< Data flows from responder to requester 141 IsWrite, //!< Data flows from requester to responder 142 IsUpgrade, 143 IsInvalidate, 144 NeedsExclusive, //!< Requires exclusive copy to complete in-cache 145 IsRequest, //!< Issued by requester 146 IsResponse, //!< Issue by responder 147 NeedsResponse, //!< Requester needs response from target 148 IsSWPrefetch, 149 IsHWPrefetch, 150 IsLlsc, //!< Alpha/MIPS LL or SC access 151 HasData, //!< There is an associated payload 152 IsError, //!< Error response 153 IsPrint, //!< Print state matching address (for debugging) 154 IsFlush, //!< Flush the address from caches 155 NUM_COMMAND_ATTRIBUTES 156 }; 157 158 /** 159 * Structure that defines attributes and other data associated 160 * with a Command. 161 */ 162 struct CommandInfo 163 { 164 /// Set of attribute flags. 165 const std::bitset<NUM_COMMAND_ATTRIBUTES> attributes; 166 /// Corresponding response for requests; InvalidCmd if no 167 /// response is applicable. 168 const Command response; 169 /// String representation (for printing) 170 const std::string str; 171 }; 172 173 /// Array to map Command enum to associated info. 174 static const CommandInfo commandInfo[]; 175 176 private: 177 178 Command cmd; 179 180 bool 181 testCmdAttrib(MemCmd::Attribute attrib) const 182 { 183 return commandInfo[cmd].attributes[attrib] != 0; 184 } 185 186 public: 187 188 bool isRead() const { return testCmdAttrib(IsRead); } 189 bool isWrite() const { return testCmdAttrib(IsWrite); } 190 bool isUpgrade() const { return testCmdAttrib(IsUpgrade); } 191 bool isRequest() const { return testCmdAttrib(IsRequest); } 192 bool isResponse() const { return testCmdAttrib(IsResponse); } 193 bool needsExclusive() const { return testCmdAttrib(NeedsExclusive); } 194 bool needsResponse() const { return testCmdAttrib(NeedsResponse); } 195 bool isInvalidate() const { return testCmdAttrib(IsInvalidate); } 196 bool hasData() const { return testCmdAttrib(HasData); } 197 bool isReadWrite() const { return isRead() && isWrite(); } 198 bool isLLSC() const { return testCmdAttrib(IsLlsc); } 199 bool isError() const { return testCmdAttrib(IsError); } 200 bool isPrint() const { return testCmdAttrib(IsPrint); } 201 bool isFlush() const { return testCmdAttrib(IsFlush); } 202 203 const Command 204 responseCommand() const 205 { 206 return commandInfo[cmd].response; 207 } 208 209 /// Return the string to a cmd given by idx. 210 const std::string &toString() const { return commandInfo[cmd].str; } 211 int toInt() const { return (int)cmd; } 212 213 MemCmd(Command _cmd) : cmd(_cmd) { } 214 MemCmd(int _cmd) : cmd((Command)_cmd) { } 215 MemCmd() : cmd(InvalidCmd) { } 216 217 bool operator==(MemCmd c2) const { return (cmd == c2.cmd); } 218 bool operator!=(MemCmd c2) const { return (cmd != c2.cmd); } 219}; 220 221/** 222 * A Packet is used to encapsulate a transfer between two objects in 223 * the memory system (e.g., the L1 and L2 cache). (In contrast, a 224 * single Request travels all the way from the requester to the 225 * ultimate destination and back, possibly being conveyed by several 226 * different Packets along the way.) 227 */ 228class Packet : public Printable 229{ 230 public: 231 typedef uint32_t FlagsType; 232 typedef ::Flags<FlagsType> Flags; 233 234 private: 235 static const FlagsType PUBLIC_FLAGS = 0x00000000; 236 static const FlagsType PRIVATE_FLAGS = 0x00007F0F; 237 static const FlagsType COPY_FLAGS = 0x0000000F; 238 239 static const FlagsType SHARED = 0x00000001; 240 // Special control flags 241 /// Special timing-mode atomic snoop for multi-level coherence. 242 static const FlagsType EXPRESS_SNOOP = 0x00000002; 243 /// Does supplier have exclusive copy? 244 /// Useful for multi-level coherence. 245 static const FlagsType SUPPLY_EXCLUSIVE = 0x00000004; 246 // Snoop response flags 247 static const FlagsType MEM_INHIBIT = 0x00000008; 248 /// Are the 'addr' and 'size' fields valid? 249 static const FlagsType VALID_ADDR = 0x00000100; 250 static const FlagsType VALID_SIZE = 0x00000200; 251 /// Is the data pointer set to a value that shouldn't be freed 252 /// when the packet is destroyed? 253 static const FlagsType STATIC_DATA = 0x00001000; 254 /// The data pointer points to a value that should be freed when 255 /// the packet is destroyed. 256 static const FlagsType DYNAMIC_DATA = 0x00002000; 257 /// the data pointer points to an array (thus delete []) needs to 258 /// be called on it rather than simply delete. 259 static const FlagsType ARRAY_DATA = 0x00004000; 260 /// suppress the error if this packet encounters a functional 261 /// access failure. 262 static const FlagsType SUPPRESS_FUNC_ERROR = 0x00008000; 263 264 Flags flags; 265 266 public: 267 typedef MemCmd::Command Command; 268 269 /// The command field of the packet. 270 MemCmd cmd; 271 272 /// A pointer to the original request. 273 RequestPtr req; 274 275 private: 276 /** 277 * A pointer to the data being transfered. It can be differnt 278 * sizes at each level of the heirarchy so it belongs in the 279 * packet, not request. This may or may not be populated when a 280 * responder recieves the packet. If not populated it memory should 281 * be allocated. 282 */ 283 PacketDataPtr data; 284 285 /// The address of the request. This address could be virtual or 286 /// physical, depending on the system configuration. 287 Addr addr; 288 289 /// The size of the request or transfer. 290 unsigned size; 291 292 /** 293 * Source port identifier set on a request packet to enable 294 * appropriate routing of the responses. The source port 295 * identifier is set by any multiplexing component, e.g. a bus, as 296 * the timing responses need this information to be routed back to 297 * the appropriate port at a later point in time. The field can be 298 * updated (over-written) as the request packet passes through 299 * additional multiplexing components, and it is their 300 * responsibility to remember the original source port identifier, 301 * for example by using an appropriate sender state. The latter is 302 * done in the cache and bridge. 303 */ 304 PortID src; 305 306 /** 307 * Destination port identifier that is present on all response 308 * packets that passed through a multiplexing component as a 309 * request packet. The source port identifier is turned into a 310 * destination port identifier when the packet is turned into a 311 * response, and the destination is used, e.g. by the bus, to 312 * select the appropriate path through the interconnect. 313 */ 314 PortID dest; 315 316 /** 317 * The original value of the command field. Only valid when the 318 * current command field is an error condition; in that case, the 319 * previous contents of the command field are copied here. This 320 * field is *not* set on non-error responses. 321 */ 322 MemCmd origCmd; 323 324 /** 325 * These values specify the range of bytes found that satisfy a 326 * functional read. 327 */ 328 uint16_t bytesValidStart; 329 uint16_t bytesValidEnd; 330 331 public: 332 /// Used to calculate latencies for each packet. 333 Tick time; 334 335 /// The time at which the packet will be fully transmitted 336 Tick finishTime; 337 338 /// The time at which the first chunk of the packet will be transmitted 339 Tick firstWordTime; 340 341 /** 342 * A virtual base opaque structure used to hold state associated
|
343 * with the packet but specific to the sending device (e.g., an
344 * MSHR). A pointer to this state is returned in the packet's
345 * response so that the sender can quickly look up the state
346 * needed to process it. A specific subclass would be derived
347 * from this to carry state specific to a particular sending
348 * device.
|
343 * with the packet (e.g., an MSHR), specific to a MemObject that 344 * sees the packet. A pointer to this state is returned in the 345 * packet's response so that the MemObject in question can quickly 346 * look up the state needed to process it. A specific subclass 347 * would be derived from this to carry state specific to a 348 * particular sending device. 349 * 350 * As multiple MemObjects may add their SenderState throughout the 351 * memory system, the SenderStates create a stack, where a 352 * MemObject can add a new Senderstate, as long as the 353 * predecessing SenderState is restored when the response comes 354 * back. For this reason, the predecessor should always be 355 * populated with the current SenderState of a packet before 356 * modifying the senderState field in the request packet. |
357 */ 358 struct SenderState 359 {
|
360 SenderState* predecessor; 361 SenderState() : predecessor(NULL) {} |
362 virtual ~SenderState() {} 363 }; 364 365 /** 366 * Object used to maintain state of a PrintReq. The senderState 367 * field of a PrintReq should always be of this type. 368 */ 369 class PrintReqState : public SenderState 370 { 371 private: 372 /** 373 * An entry in the label stack. 374 */ 375 struct LabelStackEntry 376 { 377 const std::string label; 378 std::string *prefix; 379 bool labelPrinted; 380 LabelStackEntry(const std::string &_label, std::string *_prefix); 381 }; 382 383 typedef std::list<LabelStackEntry> LabelStack; 384 LabelStack labelStack; 385 386 std::string *curPrefixPtr; 387 388 public: 389 std::ostream &os; 390 const int verbosity; 391 392 PrintReqState(std::ostream &os, int verbosity = 0); 393 ~PrintReqState(); 394 395 /** 396 * Returns the current line prefix. 397 */ 398 const std::string &curPrefix() { return *curPrefixPtr; } 399 400 /** 401 * Push a label onto the label stack, and prepend the given 402 * prefix string onto the current prefix. Labels will only be 403 * printed if an object within the label's scope is printed. 404 */ 405 void pushLabel(const std::string &lbl, 406 const std::string &prefix = " "); 407 408 /** 409 * Pop a label off the label stack. 410 */ 411 void popLabel(); 412 413 /** 414 * Print all of the pending unprinted labels on the 415 * stack. Called by printObj(), so normally not called by 416 * users unless bypassing printObj(). 417 */ 418 void printLabels(); 419 420 /** 421 * Print a Printable object to os, because it matched the 422 * address on a PrintReq. 423 */ 424 void printObj(Printable *obj); 425 }; 426 427 /** 428 * This packet's sender state. Devices should use dynamic_cast<> 429 * to cast to the state appropriate to the sender. The intent of 430 * this variable is to allow a device to attach extra information
|
421 * to a request. A response packet must return the sender state
|
431 * to a request. A response packet must return the sender state |
432 * that was attached to the original request (even if a new packet 433 * is created). 434 */ 435 SenderState *senderState; 436
|
437 /** 438 * Push a new sender state to the packet and make the current 439 * sender state the predecessor of the new one. This should be 440 * prefered over direct manipulation of the senderState member 441 * variable. 442 * 443 * @param sender_state SenderState to push at the top of the stack 444 */ 445 void pushSenderState(SenderState *sender_state); 446 447 /** 448 * Pop the top of the state stack and return a pointer to it. This 449 * assumes the current sender state is not NULL. This should be 450 * preferred over direct manipulation of the senderState member 451 * variable. 452 * 453 * @return The current top of the stack 454 */ 455 SenderState *popSenderState(); 456 |
457 /// Return the string name of the cmd field (for debugging and 458 /// tracing). 459 const std::string &cmdString() const { return cmd.toString(); } 460 461 /// Return the index of this command. 462 inline int cmdToIndex() const { return cmd.toInt(); } 463 464 bool isRead() const { return cmd.isRead(); } 465 bool isWrite() const { return cmd.isWrite(); } 466 bool isUpgrade() const { return cmd.isUpgrade(); } 467 bool isRequest() const { return cmd.isRequest(); } 468 bool isResponse() const { return cmd.isResponse(); } 469 bool needsExclusive() const { return cmd.needsExclusive(); } 470 bool needsResponse() const { return cmd.needsResponse(); } 471 bool isInvalidate() const { return cmd.isInvalidate(); } 472 bool hasData() const { return cmd.hasData(); } 473 bool isReadWrite() const { return cmd.isReadWrite(); } 474 bool isLLSC() const { return cmd.isLLSC(); } 475 bool isError() const { return cmd.isError(); } 476 bool isPrint() const { return cmd.isPrint(); } 477 bool isFlush() const { return cmd.isFlush(); } 478 479 // Snoop flags 480 void assertMemInhibit() { flags.set(MEM_INHIBIT); } 481 bool memInhibitAsserted() { return flags.isSet(MEM_INHIBIT); } 482 void assertShared() { flags.set(SHARED); } 483 bool sharedAsserted() { return flags.isSet(SHARED); } 484 485 // Special control flags 486 void setExpressSnoop() { flags.set(EXPRESS_SNOOP); } 487 bool isExpressSnoop() { return flags.isSet(EXPRESS_SNOOP); } 488 void setSupplyExclusive() { flags.set(SUPPLY_EXCLUSIVE); } 489 void clearSupplyExclusive() { flags.clear(SUPPLY_EXCLUSIVE); } 490 bool isSupplyExclusive() { return flags.isSet(SUPPLY_EXCLUSIVE); } 491 void setSuppressFuncError() { flags.set(SUPPRESS_FUNC_ERROR); } 492 bool suppressFuncError() { return flags.isSet(SUPPRESS_FUNC_ERROR); } 493 494 // Network error conditions... encapsulate them as methods since 495 // their encoding keeps changing (from result field to command 496 // field, etc.) 497 void 498 setBadAddress() 499 { 500 assert(isResponse()); 501 cmd = MemCmd::BadAddressError; 502 } 503 504 bool hadBadAddress() const { return cmd == MemCmd::BadAddressError; } 505 void copyError(Packet *pkt) { assert(pkt->isError()); cmd = pkt->cmd; } 506 507 bool isSrcValid() const { return src != InvalidPortID; } 508 /// Accessor function to get the source index of the packet. 509 PortID getSrc() const { assert(isSrcValid()); return src; } 510 /// Accessor function to set the source index of the packet. 511 void setSrc(PortID _src) { src = _src; } 512 /// Reset source field, e.g. to retransmit packet on different bus. 513 void clearSrc() { src = InvalidPortID; } 514 515 bool isDestValid() const { return dest != InvalidPortID; } 516 /// Accessor function for the destination index of the packet. 517 PortID getDest() const { assert(isDestValid()); return dest; } 518 /// Accessor function to set the destination index of the packet. 519 void setDest(PortID _dest) { dest = _dest; } 520 /// Reset destination field, e.g. to turn a response into a request again. 521 void clearDest() { dest = InvalidPortID; } 522 523 Addr getAddr() const { assert(flags.isSet(VALID_ADDR)); return addr; } 524 /** 525 * Update the address of this packet mid-transaction. This is used 526 * by the address mapper to change an already set address to a new 527 * one based on the system configuration. It is intended to remap 528 * an existing address, so it asserts that the current address is 529 * valid. 530 */ 531 void setAddr(Addr _addr) { assert(flags.isSet(VALID_ADDR)); addr = _addr; } 532 533 unsigned getSize() const { assert(flags.isSet(VALID_SIZE)); return size; } 534 Addr getOffset(int blkSize) const { return getAddr() & (Addr)(blkSize - 1); } 535 536 /** 537 * It has been determined that the SC packet should successfully update 538 * memory. Therefore, convert this SC packet to a normal write. 539 */ 540 void 541 convertScToWrite() 542 { 543 assert(isLLSC()); 544 assert(isWrite()); 545 cmd = MemCmd::WriteReq; 546 } 547 548 /** 549 * When ruby is in use, Ruby will monitor the cache line and thus M5 550 * phys memory should treat LL ops as normal reads. 551 */ 552 void 553 convertLlToRead() 554 { 555 assert(isLLSC()); 556 assert(isRead()); 557 cmd = MemCmd::ReadReq; 558 } 559 560 /** 561 * Constructor. Note that a Request object must be constructed 562 * first, but the Requests's physical address and size fields need 563 * not be valid. The command must be supplied. 564 */ 565 Packet(Request *_req, MemCmd _cmd) 566 : cmd(_cmd), req(_req), data(NULL), 567 src(InvalidPortID), dest(InvalidPortID), 568 bytesValidStart(0), bytesValidEnd(0), 569 time(curTick()), senderState(NULL) 570 { 571 if (req->hasPaddr()) { 572 addr = req->getPaddr(); 573 flags.set(VALID_ADDR); 574 } 575 if (req->hasSize()) { 576 size = req->getSize(); 577 flags.set(VALID_SIZE); 578 } 579 } 580 581 /** 582 * Alternate constructor if you are trying to create a packet with 583 * a request that is for a whole block, not the address from the 584 * req. this allows for overriding the size/addr of the req. 585 */ 586 Packet(Request *_req, MemCmd _cmd, int _blkSize) 587 : cmd(_cmd), req(_req), data(NULL), 588 src(InvalidPortID), dest(InvalidPortID), 589 bytesValidStart(0), bytesValidEnd(0), 590 time(curTick()), senderState(NULL) 591 { 592 if (req->hasPaddr()) { 593 addr = req->getPaddr() & ~(_blkSize - 1); 594 flags.set(VALID_ADDR); 595 } 596 size = _blkSize; 597 flags.set(VALID_SIZE); 598 } 599 600 /** 601 * Alternate constructor for copying a packet. Copy all fields 602 * *except* if the original packet's data was dynamic, don't copy 603 * that, as we can't guarantee that the new packet's lifetime is 604 * less than that of the original packet. In this case the new 605 * packet should allocate its own data. 606 */ 607 Packet(Packet *pkt, bool clearFlags = false) 608 : cmd(pkt->cmd), req(pkt->req), 609 data(pkt->flags.isSet(STATIC_DATA) ? pkt->data : NULL), 610 addr(pkt->addr), size(pkt->size), src(pkt->src), dest(pkt->dest), 611 bytesValidStart(pkt->bytesValidStart), bytesValidEnd(pkt->bytesValidEnd), 612 time(curTick()), senderState(pkt->senderState) 613 { 614 if (!clearFlags) 615 flags.set(pkt->flags & COPY_FLAGS); 616 617 flags.set(pkt->flags & (VALID_ADDR|VALID_SIZE)); 618 flags.set(pkt->flags & STATIC_DATA); 619 620 } 621 622 /** 623 * clean up packet variables 624 */ 625 ~Packet() 626 { 627 // If this is a request packet for which there's no response, 628 // delete the request object here, since the requester will 629 // never get the chance. 630 if (req && isRequest() && !needsResponse()) 631 delete req; 632 deleteData(); 633 } 634 635 /** 636 * Reinitialize packet address and size from the associated 637 * Request object, and reset other fields that may have been 638 * modified by a previous transaction. Typically called when a 639 * statically allocated Request/Packet pair is reused for multiple 640 * transactions. 641 */ 642 void 643 reinitFromRequest() 644 { 645 assert(req->hasPaddr()); 646 flags = 0; 647 addr = req->getPaddr(); 648 size = req->getSize(); 649 time = req->time(); 650 651 flags.set(VALID_ADDR|VALID_SIZE); 652 deleteData(); 653 } 654 655 /** 656 * Take a request packet and modify it in place to be suitable for 657 * returning as a response to that request. The source field is 658 * turned into the destination, and subsequently cleared. Note 659 * that the latter is not necessary for atomic requests, but 660 * causes no harm as neither field is valid. 661 */ 662 void 663 makeResponse() 664 { 665 assert(needsResponse()); 666 assert(isRequest()); 667 origCmd = cmd; 668 cmd = cmd.responseCommand(); 669 670 // responses are never express, even if the snoop that 671 // triggered them was 672 flags.clear(EXPRESS_SNOOP); 673 674 dest = src; 675 clearSrc(); 676 } 677 678 void 679 makeAtomicResponse() 680 { 681 makeResponse(); 682 } 683 684 void 685 makeTimingResponse() 686 { 687 makeResponse(); 688 } 689 690 void 691 setFunctionalResponseStatus(bool success) 692 { 693 if (!success) { 694 if (isWrite()) { 695 cmd = MemCmd::FunctionalWriteError; 696 } else { 697 cmd = MemCmd::FunctionalReadError; 698 } 699 } 700 } 701 702 void 703 setSize(unsigned size) 704 { 705 assert(!flags.isSet(VALID_SIZE)); 706 707 this->size = size; 708 flags.set(VALID_SIZE); 709 } 710 711 712 /** 713 * Set the data pointer to the following value that should not be 714 * freed. 715 */ 716 template <typename T> 717 void 718 dataStatic(T *p) 719 { 720 assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA|ARRAY_DATA)); 721 data = (PacketDataPtr)p; 722 flags.set(STATIC_DATA); 723 } 724 725 /** 726 * Set the data pointer to a value that should have delete [] 727 * called on it. 728 */ 729 template <typename T> 730 void 731 dataDynamicArray(T *p) 732 { 733 assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA|ARRAY_DATA)); 734 data = (PacketDataPtr)p; 735 flags.set(DYNAMIC_DATA|ARRAY_DATA); 736 } 737 738 /** 739 * set the data pointer to a value that should have delete called 740 * on it. 741 */ 742 template <typename T> 743 void 744 dataDynamic(T *p) 745 { 746 assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA|ARRAY_DATA)); 747 data = (PacketDataPtr)p; 748 flags.set(DYNAMIC_DATA); 749 } 750 751 /** 752 * get a pointer to the data ptr. 753 */ 754 template <typename T> 755 T* 756 getPtr(bool null_ok = false) 757 { 758 assert(null_ok || flags.isSet(STATIC_DATA|DYNAMIC_DATA)); 759 return (T*)data; 760 } 761 762 /** 763 * return the value of what is pointed to in the packet. 764 */ 765 template <typename T> 766 T get(); 767 768 /** 769 * set the value in the data pointer to v. 770 */ 771 template <typename T> 772 void set(T v); 773 774 /** 775 * Copy data into the packet from the provided pointer. 776 */ 777 void 778 setData(uint8_t *p) 779 { 780 if (p != getPtr<uint8_t>()) 781 std::memcpy(getPtr<uint8_t>(), p, getSize()); 782 } 783 784 /** 785 * Copy data into the packet from the provided block pointer, 786 * which is aligned to the given block size. 787 */ 788 void 789 setDataFromBlock(uint8_t *blk_data, int blkSize) 790 { 791 setData(blk_data + getOffset(blkSize)); 792 } 793 794 /** 795 * Copy data from the packet to the provided block pointer, which 796 * is aligned to the given block size. 797 */ 798 void 799 writeData(uint8_t *p) 800 { 801 std::memcpy(p, getPtr<uint8_t>(), getSize()); 802 } 803 804 /** 805 * Copy data from the packet to the memory at the provided pointer. 806 */ 807 void 808 writeDataToBlock(uint8_t *blk_data, int blkSize) 809 { 810 writeData(blk_data + getOffset(blkSize)); 811 } 812 813 /** 814 * delete the data pointed to in the data pointer. Ok to call to 815 * matter how data was allocted. 816 */ 817 void 818 deleteData() 819 { 820 if (flags.isSet(ARRAY_DATA)) 821 delete [] data; 822 else if (flags.isSet(DYNAMIC_DATA)) 823 delete data; 824 825 flags.clear(STATIC_DATA|DYNAMIC_DATA|ARRAY_DATA); 826 data = NULL; 827 } 828 829 /** If there isn't data in the packet, allocate some. */ 830 void 831 allocate() 832 { 833 if (data) { 834 assert(flags.isSet(STATIC_DATA|DYNAMIC_DATA)); 835 return; 836 } 837 838 assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA)); 839 flags.set(DYNAMIC_DATA|ARRAY_DATA); 840 data = new uint8_t[getSize()]; 841 } 842 843 /** 844 * Check a functional request against a memory value represented 845 * by a base/size pair and an associated data array. If the 846 * functional request is a read, it may be satisfied by the memory 847 * value. If the functional request is a write, it may update the 848 * memory value. 849 */ 850 bool checkFunctional(Printable *obj, Addr base, int size, uint8_t *data); 851 852 /** 853 * Check a functional request against a memory value stored in 854 * another packet (i.e. an in-transit request or response). 855 */ 856 bool 857 checkFunctional(PacketPtr other) 858 { 859 uint8_t *data = other->hasData() ? other->getPtr<uint8_t>() : NULL; 860 return checkFunctional(other, other->getAddr(), other->getSize(), 861 data); 862 } 863 864 /** 865 * Push label for PrintReq (safe to call unconditionally). 866 */ 867 void 868 pushLabel(const std::string &lbl) 869 { 870 if (isPrint()) 871 safe_cast<PrintReqState*>(senderState)->pushLabel(lbl); 872 } 873 874 /** 875 * Pop label for PrintReq (safe to call unconditionally). 876 */ 877 void 878 popLabel() 879 { 880 if (isPrint()) 881 safe_cast<PrintReqState*>(senderState)->popLabel(); 882 } 883 884 void print(std::ostream &o, int verbosity = 0, 885 const std::string &prefix = "") const; 886}; 887 888#endif //__MEM_PACKET_HH
|