1/*
2 * Copyright (c) 2012-2018 ARM Limited
3 * All rights reserved
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder. You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2006 The Regents of The University of Michigan
15 * Copyright (c) 2010,2015 Advanced Micro Devices, Inc.
16 * All rights reserved.
17 *
18 * Redistribution and use in source and binary forms, with or without
19 * modification, are permitted provided that the following conditions are
20 * met: redistributions of source code must retain the above copyright
21 * notice, this list of conditions and the following disclaimer;
22 * redistributions in binary form must reproduce the above copyright
23 * notice, this list of conditions and the following disclaimer in the
24 * documentation and/or other materials provided with the distribution;
25 * neither the name of the copyright holders nor the names of its
26 * contributors may be used to endorse or promote products derived from
27 * this software without specific prior written permission.
28 *
29 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
30 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
31 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
32 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
33 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
34 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
35 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
36 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
37 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
38 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
39 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
40 *
41 * Authors: Ron Dreslinski
42 * Steve Reinhardt
43 * Ali Saidi
44 * Andreas Hansson
45 * Nikos Nikoleris
46 */
47
48/**
49 * @file
50 * Declaration of the Packet class.
51 */
52
53#ifndef __MEM_PACKET_HH__
54#define __MEM_PACKET_HH__
55
56#include <bitset>
57#include <cassert>
58#include <list>
59
60#include "base/cast.hh"
61#include "base/compiler.hh"
62#include "base/flags.hh"
63#include "base/logging.hh"
64#include "base/printable.hh"
65#include "base/types.hh"
66#include "config/the_isa.hh"
67#include "mem/request.hh"
68#include "sim/core.hh"
69
70class Packet;
71typedef Packet *PacketPtr;
72typedef uint8_t* PacketDataPtr;
73typedef std::list<PacketPtr> PacketList;
74typedef uint64_t PacketId;
75
76class MemCmd
77{
78 friend class Packet;
79
80 public:
81 /**
82 * List of all commands associated with a packet.
83 */
84 enum Command
85 {
86 InvalidCmd,
87 ReadReq,
88 ReadResp,
89 ReadRespWithInvalidate,
90 WriteReq,
91 WriteResp,
92 WritebackDirty,
93 WritebackClean,
94 WriteClean, // writes dirty data below without evicting
95 CleanEvict,
96 SoftPFReq,
| 1/*
2 * Copyright (c) 2012-2018 ARM Limited
3 * All rights reserved
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder. You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2006 The Regents of The University of Michigan
15 * Copyright (c) 2010,2015 Advanced Micro Devices, Inc.
16 * All rights reserved.
17 *
18 * Redistribution and use in source and binary forms, with or without
19 * modification, are permitted provided that the following conditions are
20 * met: redistributions of source code must retain the above copyright
21 * notice, this list of conditions and the following disclaimer;
22 * redistributions in binary form must reproduce the above copyright
23 * notice, this list of conditions and the following disclaimer in the
24 * documentation and/or other materials provided with the distribution;
25 * neither the name of the copyright holders nor the names of its
26 * contributors may be used to endorse or promote products derived from
27 * this software without specific prior written permission.
28 *
29 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
30 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
31 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
32 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
33 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
34 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
35 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
36 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
37 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
38 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
39 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
40 *
41 * Authors: Ron Dreslinski
42 * Steve Reinhardt
43 * Ali Saidi
44 * Andreas Hansson
45 * Nikos Nikoleris
46 */
47
48/**
49 * @file
50 * Declaration of the Packet class.
51 */
52
53#ifndef __MEM_PACKET_HH__
54#define __MEM_PACKET_HH__
55
56#include <bitset>
57#include <cassert>
58#include <list>
59
60#include "base/cast.hh"
61#include "base/compiler.hh"
62#include "base/flags.hh"
63#include "base/logging.hh"
64#include "base/printable.hh"
65#include "base/types.hh"
66#include "config/the_isa.hh"
67#include "mem/request.hh"
68#include "sim/core.hh"
69
70class Packet;
71typedef Packet *PacketPtr;
72typedef uint8_t* PacketDataPtr;
73typedef std::list<PacketPtr> PacketList;
74typedef uint64_t PacketId;
75
76class MemCmd
77{
78 friend class Packet;
79
80 public:
81 /**
82 * List of all commands associated with a packet.
83 */
84 enum Command
85 {
86 InvalidCmd,
87 ReadReq,
88 ReadResp,
89 ReadRespWithInvalidate,
90 WriteReq,
91 WriteResp,
92 WritebackDirty,
93 WritebackClean,
94 WriteClean, // writes dirty data below without evicting
95 CleanEvict,
96 SoftPFReq,
|
97 HardPFReq,
98 SoftPFResp,
99 HardPFResp,
100 WriteLineReq,
101 UpgradeReq,
102 SCUpgradeReq, // Special "weak" upgrade for StoreCond
103 UpgradeResp,
104 SCUpgradeFailReq, // Failed SCUpgradeReq in MSHR (never sent)
105 UpgradeFailResp, // Valid for SCUpgradeReq only
106 ReadExReq,
107 ReadExResp,
108 ReadCleanReq,
109 ReadSharedReq,
110 LoadLockedReq,
111 StoreCondReq,
112 StoreCondFailReq, // Failed StoreCondReq in MSHR (never sent)
113 StoreCondResp,
114 SwapReq,
115 SwapResp,
116 MessageReq,
117 MessageResp,
118 MemFenceReq,
119 MemFenceResp,
120 CleanSharedReq,
121 CleanSharedResp,
122 CleanInvalidReq,
123 CleanInvalidResp,
124 // Error responses
125 // @TODO these should be classified as responses rather than
126 // requests; coding them as requests initially for backwards
127 // compatibility
128 InvalidDestError, // packet dest field invalid
129 BadAddressError, // memory address invalid
130 FunctionalReadError, // unable to fulfill functional read
131 FunctionalWriteError, // unable to fulfill functional write
132 // Fake simulator-only commands
133 PrintReq, // Print state matching address
134 FlushReq, //request for a cache flush
135 InvalidateReq, // request for address to be invalidated
136 InvalidateResp,
137 NUM_MEM_CMDS
138 };
139
140 private:
141 /**
142 * List of command attributes.
143 */
144 enum Attribute
145 {
146 IsRead, //!< Data flows from responder to requester
147 IsWrite, //!< Data flows from requester to responder
148 IsUpgrade,
149 IsInvalidate,
150 IsClean, //!< Cleans any existing dirty blocks
151 NeedsWritable, //!< Requires writable copy to complete in-cache
152 IsRequest, //!< Issued by requester
153 IsResponse, //!< Issue by responder
154 NeedsResponse, //!< Requester needs response from target
155 IsEviction,
156 IsSWPrefetch,
157 IsHWPrefetch,
158 IsLlsc, //!< Alpha/MIPS LL or SC access
159 HasData, //!< There is an associated payload
160 IsError, //!< Error response
161 IsPrint, //!< Print state matching address (for debugging)
162 IsFlush, //!< Flush the address from caches
163 FromCache, //!< Request originated from a caching agent
164 NUM_COMMAND_ATTRIBUTES
165 };
166
167 /**
168 * Structure that defines attributes and other data associated
169 * with a Command.
170 */
171 struct CommandInfo
172 {
173 /// Set of attribute flags.
174 const std::bitset<NUM_COMMAND_ATTRIBUTES> attributes;
175 /// Corresponding response for requests; InvalidCmd if no
176 /// response is applicable.
177 const Command response;
178 /// String representation (for printing)
179 const std::string str;
180 };
181
182 /// Array to map Command enum to associated info.
183 static const CommandInfo commandInfo[];
184
185 private:
186
187 Command cmd;
188
189 bool
190 testCmdAttrib(MemCmd::Attribute attrib) const
191 {
192 return commandInfo[cmd].attributes[attrib] != 0;
193 }
194
195 public:
196
197 bool isRead() const { return testCmdAttrib(IsRead); }
198 bool isWrite() const { return testCmdAttrib(IsWrite); }
199 bool isUpgrade() const { return testCmdAttrib(IsUpgrade); }
200 bool isRequest() const { return testCmdAttrib(IsRequest); }
201 bool isResponse() const { return testCmdAttrib(IsResponse); }
202 bool needsWritable() const { return testCmdAttrib(NeedsWritable); }
203 bool needsResponse() const { return testCmdAttrib(NeedsResponse); }
204 bool isInvalidate() const { return testCmdAttrib(IsInvalidate); }
205 bool isEviction() const { return testCmdAttrib(IsEviction); }
206 bool isClean() const { return testCmdAttrib(IsClean); }
207 bool fromCache() const { return testCmdAttrib(FromCache); }
208
209 /**
210 * A writeback is an eviction that carries data.
211 */
212 bool isWriteback() const { return testCmdAttrib(IsEviction) &&
213 testCmdAttrib(HasData); }
214
215 /**
216 * Check if this particular packet type carries payload data. Note
217 * that this does not reflect if the data pointer of the packet is
218 * valid or not.
219 */
220 bool hasData() const { return testCmdAttrib(HasData); }
221 bool isLLSC() const { return testCmdAttrib(IsLlsc); }
222 bool isSWPrefetch() const { return testCmdAttrib(IsSWPrefetch); }
223 bool isHWPrefetch() const { return testCmdAttrib(IsHWPrefetch); }
224 bool isPrefetch() const { return testCmdAttrib(IsSWPrefetch) ||
225 testCmdAttrib(IsHWPrefetch); }
226 bool isError() const { return testCmdAttrib(IsError); }
227 bool isPrint() const { return testCmdAttrib(IsPrint); }
228 bool isFlush() const { return testCmdAttrib(IsFlush); }
229
230 Command
231 responseCommand() const
232 {
233 return commandInfo[cmd].response;
234 }
235
236 /// Return the string to a cmd given by idx.
237 const std::string &toString() const { return commandInfo[cmd].str; }
238 int toInt() const { return (int)cmd; }
239
240 MemCmd(Command _cmd) : cmd(_cmd) { }
241 MemCmd(int _cmd) : cmd((Command)_cmd) { }
242 MemCmd() : cmd(InvalidCmd) { }
243
244 bool operator==(MemCmd c2) const { return (cmd == c2.cmd); }
245 bool operator!=(MemCmd c2) const { return (cmd != c2.cmd); }
246};
247
248/**
249 * A Packet is used to encapsulate a transfer between two objects in
250 * the memory system (e.g., the L1 and L2 cache). (In contrast, a
251 * single Request travels all the way from the requester to the
252 * ultimate destination and back, possibly being conveyed by several
253 * different Packets along the way.)
254 */
255class Packet : public Printable
256{
257 public:
258 typedef uint32_t FlagsType;
259 typedef ::Flags<FlagsType> Flags;
260
261 private:
262
263 enum : FlagsType {
264 // Flags to transfer across when copying a packet
265 COPY_FLAGS = 0x0000003F,
266
267 // Does this packet have sharers (which means it should not be
268 // considered writable) or not. See setHasSharers below.
269 HAS_SHARERS = 0x00000001,
270
271 // Special control flags
272 /// Special timing-mode atomic snoop for multi-level coherence.
273 EXPRESS_SNOOP = 0x00000002,
274
275 /// Allow a responding cache to inform the cache hierarchy
276 /// that it had a writable copy before responding. See
277 /// setResponderHadWritable below.
278 RESPONDER_HAD_WRITABLE = 0x00000004,
279
280 // Snoop co-ordination flag to indicate that a cache is
281 // responding to a snoop. See setCacheResponding below.
282 CACHE_RESPONDING = 0x00000008,
283
284 // The writeback/writeclean should be propagated further
285 // downstream by the receiver
286 WRITE_THROUGH = 0x00000010,
287
288 // Response co-ordination flag for cache maintenance
289 // operations
290 SATISFIED = 0x00000020,
291
292 /// Are the 'addr' and 'size' fields valid?
293 VALID_ADDR = 0x00000100,
294 VALID_SIZE = 0x00000200,
295
296 /// Is the data pointer set to a value that shouldn't be freed
297 /// when the packet is destroyed?
298 STATIC_DATA = 0x00001000,
299 /// The data pointer points to a value that should be freed when
300 /// the packet is destroyed. The pointer is assumed to be pointing
301 /// to an array, and delete [] is consequently called
302 DYNAMIC_DATA = 0x00002000,
303
304 /// suppress the error if this packet encounters a functional
305 /// access failure.
306 SUPPRESS_FUNC_ERROR = 0x00008000,
307
308 // Signal block present to squash prefetch and cache evict packets
309 // through express snoop flag
310 BLOCK_CACHED = 0x00010000
311 };
312
313 Flags flags;
314
315 public:
316 typedef MemCmd::Command Command;
317
318 /// The command field of the packet.
319 MemCmd cmd;
320
321 const PacketId id;
322
323 /// A pointer to the original request.
324 RequestPtr req;
325
326 private:
327 /**
328 * A pointer to the data being transferred. It can be different
329 * sizes at each level of the hierarchy so it belongs to the
330 * packet, not request. This may or may not be populated when a
331 * responder receives the packet. If not populated memory should
332 * be allocated.
333 */
334 PacketDataPtr data;
335
336 /// The address of the request. This address could be virtual or
337 /// physical, depending on the system configuration.
338 Addr addr;
339
340 /// True if the request targets the secure memory space.
341 bool _isSecure;
342
343 /// The size of the request or transfer.
344 unsigned size;
345
346 /**
347 * Track the bytes found that satisfy a functional read.
348 */
349 std::vector<bool> bytesValid;
350
351 // Quality of Service priority value
352 uint8_t _qosValue;
353
354 public:
355
356 /**
357 * The extra delay from seeing the packet until the header is
358 * transmitted. This delay is used to communicate the crossbar
359 * forwarding latency to the neighbouring object (e.g. a cache)
360 * that actually makes the packet wait. As the delay is relative,
361 * a 32-bit unsigned should be sufficient.
362 */
363 uint32_t headerDelay;
364
365 /**
366 * Keep track of the extra delay incurred by snooping upwards
367 * before sending a request down the memory system. This is used
368 * by the coherent crossbar to account for the additional request
369 * delay.
370 */
371 uint32_t snoopDelay;
372
373 /**
374 * The extra pipelining delay from seeing the packet until the end of
375 * payload is transmitted by the component that provided it (if
376 * any). This includes the header delay. Similar to the header
377 * delay, this is used to make up for the fact that the
378 * crossbar does not make the packet wait. As the delay is
379 * relative, a 32-bit unsigned should be sufficient.
380 */
381 uint32_t payloadDelay;
382
383 /**
384 * A virtual base opaque structure used to hold state associated
385 * with the packet (e.g., an MSHR), specific to a MemObject that
386 * sees the packet. A pointer to this state is returned in the
387 * packet's response so that the MemObject in question can quickly
388 * look up the state needed to process it. A specific subclass
389 * would be derived from this to carry state specific to a
390 * particular sending device.
391 *
392 * As multiple MemObjects may add their SenderState throughout the
393 * memory system, the SenderStates create a stack, where a
394 * MemObject can add a new Senderstate, as long as the
395 * predecessing SenderState is restored when the response comes
396 * back. For this reason, the predecessor should always be
397 * populated with the current SenderState of a packet before
398 * modifying the senderState field in the request packet.
399 */
400 struct SenderState
401 {
402 SenderState* predecessor;
403 SenderState() : predecessor(NULL) {}
404 virtual ~SenderState() {}
405 };
406
407 /**
408 * Object used to maintain state of a PrintReq. The senderState
409 * field of a PrintReq should always be of this type.
410 */
411 class PrintReqState : public SenderState
412 {
413 private:
414 /**
415 * An entry in the label stack.
416 */
417 struct LabelStackEntry
418 {
419 const std::string label;
420 std::string *prefix;
421 bool labelPrinted;
422 LabelStackEntry(const std::string &_label, std::string *_prefix);
423 };
424
425 typedef std::list<LabelStackEntry> LabelStack;
426 LabelStack labelStack;
427
428 std::string *curPrefixPtr;
429
430 public:
431 std::ostream &os;
432 const int verbosity;
433
434 PrintReqState(std::ostream &os, int verbosity = 0);
435 ~PrintReqState();
436
437 /**
438 * Returns the current line prefix.
439 */
440 const std::string &curPrefix() { return *curPrefixPtr; }
441
442 /**
443 * Push a label onto the label stack, and prepend the given
444 * prefix string onto the current prefix. Labels will only be
445 * printed if an object within the label's scope is printed.
446 */
447 void pushLabel(const std::string &lbl,
448 const std::string &prefix = " ");
449
450 /**
451 * Pop a label off the label stack.
452 */
453 void popLabel();
454
455 /**
456 * Print all of the pending unprinted labels on the
457 * stack. Called by printObj(), so normally not called by
458 * users unless bypassing printObj().
459 */
460 void printLabels();
461
462 /**
463 * Print a Printable object to os, because it matched the
464 * address on a PrintReq.
465 */
466 void printObj(Printable *obj);
467 };
468
469 /**
470 * This packet's sender state. Devices should use dynamic_cast<>
471 * to cast to the state appropriate to the sender. The intent of
472 * this variable is to allow a device to attach extra information
473 * to a request. A response packet must return the sender state
474 * that was attached to the original request (even if a new packet
475 * is created).
476 */
477 SenderState *senderState;
478
479 /**
480 * Push a new sender state to the packet and make the current
481 * sender state the predecessor of the new one. This should be
482 * prefered over direct manipulation of the senderState member
483 * variable.
484 *
485 * @param sender_state SenderState to push at the top of the stack
486 */
487 void pushSenderState(SenderState *sender_state);
488
489 /**
490 * Pop the top of the state stack and return a pointer to it. This
491 * assumes the current sender state is not NULL. This should be
492 * preferred over direct manipulation of the senderState member
493 * variable.
494 *
495 * @return The current top of the stack
496 */
497 SenderState *popSenderState();
498
499 /**
500 * Go through the sender state stack and return the first instance
501 * that is of type T (as determined by a dynamic_cast). If there
502 * is no sender state of type T, NULL is returned.
503 *
504 * @return The topmost state of type T
505 */
506 template <typename T>
507 T * findNextSenderState() const
508 {
509 T *t = NULL;
510 SenderState* sender_state = senderState;
511 while (t == NULL && sender_state != NULL) {
512 t = dynamic_cast<T*>(sender_state);
513 sender_state = sender_state->predecessor;
514 }
515 return t;
516 }
517
518 /// Return the string name of the cmd field (for debugging and
519 /// tracing).
520 const std::string &cmdString() const { return cmd.toString(); }
521
522 /// Return the index of this command.
523 inline int cmdToIndex() const { return cmd.toInt(); }
524
525 bool isRead() const { return cmd.isRead(); }
526 bool isWrite() const { return cmd.isWrite(); }
527 bool isUpgrade() const { return cmd.isUpgrade(); }
528 bool isRequest() const { return cmd.isRequest(); }
529 bool isResponse() const { return cmd.isResponse(); }
530 bool needsWritable() const
531 {
532 // we should never check if a response needsWritable, the
533 // request has this flag, and for a response we should rather
534 // look at the hasSharers flag (if not set, the response is to
535 // be considered writable)
536 assert(isRequest());
537 return cmd.needsWritable();
538 }
539 bool needsResponse() const { return cmd.needsResponse(); }
540 bool isInvalidate() const { return cmd.isInvalidate(); }
541 bool isEviction() const { return cmd.isEviction(); }
542 bool isClean() const { return cmd.isClean(); }
543 bool fromCache() const { return cmd.fromCache(); }
544 bool isWriteback() const { return cmd.isWriteback(); }
545 bool hasData() const { return cmd.hasData(); }
546 bool hasRespData() const
547 {
548 MemCmd resp_cmd = cmd.responseCommand();
549 return resp_cmd.hasData();
550 }
551 bool isLLSC() const { return cmd.isLLSC(); }
552 bool isError() const { return cmd.isError(); }
553 bool isPrint() const { return cmd.isPrint(); }
554 bool isFlush() const { return cmd.isFlush(); }
555
556 bool isWholeLineWrite(unsigned blk_size)
557 {
558 return (cmd == MemCmd::WriteReq || cmd == MemCmd::WriteLineReq) &&
559 getOffset(blk_size) == 0 && getSize() == blk_size;
560 }
561
562 //@{
563 /// Snoop flags
564 /**
565 * Set the cacheResponding flag. This is used by the caches to
566 * signal another cache that they are responding to a request. A
567 * cache will only respond to snoops if it has the line in either
568 * Modified or Owned state. Note that on snoop hits we always pass
569 * the line as Modified and never Owned. In the case of an Owned
570 * line we proceed to invalidate all other copies.
571 *
572 * On a cache fill (see Cache::handleFill), we check hasSharers
573 * first, ignoring the cacheResponding flag if hasSharers is set.
574 * A line is consequently allocated as:
575 *
576 * hasSharers cacheResponding state
577 * true false Shared
578 * true true Shared
579 * false false Exclusive
580 * false true Modified
581 */
582 void setCacheResponding()
583 {
584 assert(isRequest());
585 assert(!flags.isSet(CACHE_RESPONDING));
586 flags.set(CACHE_RESPONDING);
587 }
588 bool cacheResponding() const { return flags.isSet(CACHE_RESPONDING); }
589 /**
590 * On fills, the hasSharers flag is used by the caches in
591 * combination with the cacheResponding flag, as clarified
592 * above. If the hasSharers flag is not set, the packet is passing
593 * writable. Thus, a response from a memory passes the line as
594 * writable by default.
595 *
596 * The hasSharers flag is also used by upstream caches to inform a
597 * downstream cache that they have the block (by calling
598 * setHasSharers on snoop request packets that hit in upstream
599 * cachs tags or MSHRs). If the snoop packet has sharers, a
600 * downstream cache is prevented from passing a dirty line upwards
601 * if it was not explicitly asked for a writable copy. See
602 * Cache::satisfyCpuSideRequest.
603 *
604 * The hasSharers flag is also used on writebacks, in
605 * combination with the WritbackClean or WritebackDirty commands,
606 * to allocate the block downstream either as:
607 *
608 * command hasSharers state
609 * WritebackDirty false Modified
610 * WritebackDirty true Owned
611 * WritebackClean false Exclusive
612 * WritebackClean true Shared
613 */
614 void setHasSharers() { flags.set(HAS_SHARERS); }
615 bool hasSharers() const { return flags.isSet(HAS_SHARERS); }
616 //@}
617
618 /**
619 * The express snoop flag is used for two purposes. Firstly, it is
620 * used to bypass flow control for normal (non-snoop) requests
621 * going downstream in the memory system. In cases where a cache
622 * is responding to a snoop from another cache (it had a dirty
623 * line), but the line is not writable (and there are possibly
624 * other copies), the express snoop flag is set by the downstream
625 * cache to invalidate all other copies in zero time. Secondly,
626 * the express snoop flag is also set to be able to distinguish
627 * snoop packets that came from a downstream cache, rather than
628 * snoop packets from neighbouring caches.
629 */
630 void setExpressSnoop() { flags.set(EXPRESS_SNOOP); }
631 bool isExpressSnoop() const { return flags.isSet(EXPRESS_SNOOP); }
632
633 /**
634 * On responding to a snoop request (which only happens for
635 * Modified or Owned lines), make sure that we can transform an
636 * Owned response to a Modified one. If this flag is not set, the
637 * responding cache had the line in the Owned state, and there are
638 * possibly other Shared copies in the memory system. A downstream
639 * cache helps in orchestrating the invalidation of these copies
640 * by sending out the appropriate express snoops.
641 */
642 void setResponderHadWritable()
643 {
644 assert(cacheResponding());
645 assert(!responderHadWritable());
646 flags.set(RESPONDER_HAD_WRITABLE);
647 }
648 bool responderHadWritable() const
649 { return flags.isSet(RESPONDER_HAD_WRITABLE); }
650
651 /**
652 * A writeback/writeclean cmd gets propagated further downstream
653 * by the receiver when the flag is set.
654 */
655 void setWriteThrough()
656 {
657 assert(cmd.isWrite() &&
658 (cmd.isEviction() || cmd == MemCmd::WriteClean));
659 flags.set(WRITE_THROUGH);
660 }
661 void clearWriteThrough() { flags.clear(WRITE_THROUGH); }
662 bool writeThrough() const { return flags.isSet(WRITE_THROUGH); }
663
664 /**
665 * Set when a request hits in a cache and the cache is not going
666 * to respond. This is used by the crossbar to coordinate
667 * responses for cache maintenance operations.
668 */
669 void setSatisfied()
670 {
671 assert(cmd.isClean());
672 assert(!flags.isSet(SATISFIED));
673 flags.set(SATISFIED);
674 }
675 bool satisfied() const { return flags.isSet(SATISFIED); }
676
677 void setSuppressFuncError() { flags.set(SUPPRESS_FUNC_ERROR); }
678 bool suppressFuncError() const { return flags.isSet(SUPPRESS_FUNC_ERROR); }
679 void setBlockCached() { flags.set(BLOCK_CACHED); }
680 bool isBlockCached() const { return flags.isSet(BLOCK_CACHED); }
681 void clearBlockCached() { flags.clear(BLOCK_CACHED); }
682
683 /**
684 * QoS Value getter
685 * Returns 0 if QoS value was never set (constructor default).
686 *
687 * @return QoS priority value of the packet
688 */
689 inline uint8_t qosValue() const { return _qosValue; }
690
691 /**
692 * QoS Value setter
693 * Interface for setting QoS priority value of the packet.
694 *
695 * @param qos_value QoS priority value
696 */
697 inline void qosValue(const uint8_t qos_value)
698 { _qosValue = qos_value; }
699
700 inline MasterID masterId() const { return req->masterId(); }
701
702 // Network error conditions... encapsulate them as methods since
703 // their encoding keeps changing (from result field to command
704 // field, etc.)
705 void
706 setBadAddress()
707 {
708 assert(isResponse());
709 cmd = MemCmd::BadAddressError;
710 }
711
712 void copyError(Packet *pkt) { assert(pkt->isError()); cmd = pkt->cmd; }
713
714 Addr getAddr() const { assert(flags.isSet(VALID_ADDR)); return addr; }
715 /**
716 * Update the address of this packet mid-transaction. This is used
717 * by the address mapper to change an already set address to a new
718 * one based on the system configuration. It is intended to remap
719 * an existing address, so it asserts that the current address is
720 * valid.
721 */
722 void setAddr(Addr _addr) { assert(flags.isSet(VALID_ADDR)); addr = _addr; }
723
724 unsigned getSize() const { assert(flags.isSet(VALID_SIZE)); return size; }
725
726 Addr getOffset(unsigned int blk_size) const
727 {
728 return getAddr() & Addr(blk_size - 1);
729 }
730
731 Addr getBlockAddr(unsigned int blk_size) const
732 {
733 return getAddr() & ~(Addr(blk_size - 1));
734 }
735
736 bool isSecure() const
737 {
738 assert(flags.isSet(VALID_ADDR));
739 return _isSecure;
740 }
741
742 /**
743 * Accessor function to atomic op.
744 */
745 AtomicOpFunctor *getAtomicOp() const { return req->getAtomicOpFunctor(); }
746 bool isAtomicOp() const { return req->isAtomic(); }
747
748 /**
749 * It has been determined that the SC packet should successfully update
750 * memory. Therefore, convert this SC packet to a normal write.
751 */
752 void
753 convertScToWrite()
754 {
755 assert(isLLSC());
756 assert(isWrite());
757 cmd = MemCmd::WriteReq;
758 }
759
760 /**
761 * When ruby is in use, Ruby will monitor the cache line and the
762 * phys memory should treat LL ops as normal reads.
763 */
764 void
765 convertLlToRead()
766 {
767 assert(isLLSC());
768 assert(isRead());
769 cmd = MemCmd::ReadReq;
770 }
771
772 /**
773 * Constructor. Note that a Request object must be constructed
774 * first, but the Requests's physical address and size fields need
775 * not be valid. The command must be supplied.
776 */
777 Packet(const RequestPtr &_req, MemCmd _cmd)
778 : cmd(_cmd), id((PacketId)_req.get()), req(_req),
779 data(nullptr), addr(0), _isSecure(false), size(0),
780 _qosValue(0), headerDelay(0), snoopDelay(0),
781 payloadDelay(0), senderState(NULL)
782 {
783 if (req->hasPaddr()) {
784 addr = req->getPaddr();
785 flags.set(VALID_ADDR);
786 _isSecure = req->isSecure();
787 }
788 if (req->hasSize()) {
789 size = req->getSize();
790 flags.set(VALID_SIZE);
791 }
792 }
793
794 /**
795 * Alternate constructor if you are trying to create a packet with
796 * a request that is for a whole block, not the address from the
797 * req. this allows for overriding the size/addr of the req.
798 */
799 Packet(const RequestPtr &_req, MemCmd _cmd, int _blkSize, PacketId _id = 0)
800 : cmd(_cmd), id(_id ? _id : (PacketId)_req.get()), req(_req),
801 data(nullptr), addr(0), _isSecure(false),
802 _qosValue(0), headerDelay(0),
803 snoopDelay(0), payloadDelay(0), senderState(NULL)
804 {
805 if (req->hasPaddr()) {
806 addr = req->getPaddr() & ~(_blkSize - 1);
807 flags.set(VALID_ADDR);
808 _isSecure = req->isSecure();
809 }
810 size = _blkSize;
811 flags.set(VALID_SIZE);
812 }
813
814 /**
815 * Alternate constructor for copying a packet. Copy all fields
816 * *except* if the original packet's data was dynamic, don't copy
817 * that, as we can't guarantee that the new packet's lifetime is
818 * less than that of the original packet. In this case the new
819 * packet should allocate its own data.
820 */
821 Packet(const PacketPtr pkt, bool clear_flags, bool alloc_data)
822 : cmd(pkt->cmd), id(pkt->id), req(pkt->req),
823 data(nullptr),
824 addr(pkt->addr), _isSecure(pkt->_isSecure), size(pkt->size),
825 bytesValid(pkt->bytesValid),
826 _qosValue(pkt->qosValue()),
827 headerDelay(pkt->headerDelay),
828 snoopDelay(0),
829 payloadDelay(pkt->payloadDelay),
830 senderState(pkt->senderState)
831 {
832 if (!clear_flags)
833 flags.set(pkt->flags & COPY_FLAGS);
834
835 flags.set(pkt->flags & (VALID_ADDR|VALID_SIZE));
836
837 // should we allocate space for data, or not, the express
838 // snoops do not need to carry any data as they only serve to
839 // co-ordinate state changes
840 if (alloc_data) {
841 // even if asked to allocate data, if the original packet
842 // holds static data, then the sender will not be doing
843 // any memcpy on receiving the response, thus we simply
844 // carry the pointer forward
845 if (pkt->flags.isSet(STATIC_DATA)) {
846 data = pkt->data;
847 flags.set(STATIC_DATA);
848 } else {
849 allocate();
850 }
851 }
852 }
853
854 /**
855 * Generate the appropriate read MemCmd based on the Request flags.
856 */
857 static MemCmd
858 makeReadCmd(const RequestPtr &req)
859 {
860 if (req->isLLSC())
861 return MemCmd::LoadLockedReq;
| 98 HardPFReq,
99 SoftPFResp,
100 HardPFResp,
101 WriteLineReq,
102 UpgradeReq,
103 SCUpgradeReq, // Special "weak" upgrade for StoreCond
104 UpgradeResp,
105 SCUpgradeFailReq, // Failed SCUpgradeReq in MSHR (never sent)
106 UpgradeFailResp, // Valid for SCUpgradeReq only
107 ReadExReq,
108 ReadExResp,
109 ReadCleanReq,
110 ReadSharedReq,
111 LoadLockedReq,
112 StoreCondReq,
113 StoreCondFailReq, // Failed StoreCondReq in MSHR (never sent)
114 StoreCondResp,
115 SwapReq,
116 SwapResp,
117 MessageReq,
118 MessageResp,
119 MemFenceReq,
120 MemFenceResp,
121 CleanSharedReq,
122 CleanSharedResp,
123 CleanInvalidReq,
124 CleanInvalidResp,
125 // Error responses
126 // @TODO these should be classified as responses rather than
127 // requests; coding them as requests initially for backwards
128 // compatibility
129 InvalidDestError, // packet dest field invalid
130 BadAddressError, // memory address invalid
131 FunctionalReadError, // unable to fulfill functional read
132 FunctionalWriteError, // unable to fulfill functional write
133 // Fake simulator-only commands
134 PrintReq, // Print state matching address
135 FlushReq, //request for a cache flush
136 InvalidateReq, // request for address to be invalidated
137 InvalidateResp,
138 NUM_MEM_CMDS
139 };
140
141 private:
142 /**
143 * List of command attributes.
144 */
145 enum Attribute
146 {
147 IsRead, //!< Data flows from responder to requester
148 IsWrite, //!< Data flows from requester to responder
149 IsUpgrade,
150 IsInvalidate,
151 IsClean, //!< Cleans any existing dirty blocks
152 NeedsWritable, //!< Requires writable copy to complete in-cache
153 IsRequest, //!< Issued by requester
154 IsResponse, //!< Issue by responder
155 NeedsResponse, //!< Requester needs response from target
156 IsEviction,
157 IsSWPrefetch,
158 IsHWPrefetch,
159 IsLlsc, //!< Alpha/MIPS LL or SC access
160 HasData, //!< There is an associated payload
161 IsError, //!< Error response
162 IsPrint, //!< Print state matching address (for debugging)
163 IsFlush, //!< Flush the address from caches
164 FromCache, //!< Request originated from a caching agent
165 NUM_COMMAND_ATTRIBUTES
166 };
167
168 /**
169 * Structure that defines attributes and other data associated
170 * with a Command.
171 */
172 struct CommandInfo
173 {
174 /// Set of attribute flags.
175 const std::bitset<NUM_COMMAND_ATTRIBUTES> attributes;
176 /// Corresponding response for requests; InvalidCmd if no
177 /// response is applicable.
178 const Command response;
179 /// String representation (for printing)
180 const std::string str;
181 };
182
183 /// Array to map Command enum to associated info.
184 static const CommandInfo commandInfo[];
185
186 private:
187
188 Command cmd;
189
190 bool
191 testCmdAttrib(MemCmd::Attribute attrib) const
192 {
193 return commandInfo[cmd].attributes[attrib] != 0;
194 }
195
196 public:
197
198 bool isRead() const { return testCmdAttrib(IsRead); }
199 bool isWrite() const { return testCmdAttrib(IsWrite); }
200 bool isUpgrade() const { return testCmdAttrib(IsUpgrade); }
201 bool isRequest() const { return testCmdAttrib(IsRequest); }
202 bool isResponse() const { return testCmdAttrib(IsResponse); }
203 bool needsWritable() const { return testCmdAttrib(NeedsWritable); }
204 bool needsResponse() const { return testCmdAttrib(NeedsResponse); }
205 bool isInvalidate() const { return testCmdAttrib(IsInvalidate); }
206 bool isEviction() const { return testCmdAttrib(IsEviction); }
207 bool isClean() const { return testCmdAttrib(IsClean); }
208 bool fromCache() const { return testCmdAttrib(FromCache); }
209
210 /**
211 * A writeback is an eviction that carries data.
212 */
213 bool isWriteback() const { return testCmdAttrib(IsEviction) &&
214 testCmdAttrib(HasData); }
215
216 /**
217 * Check if this particular packet type carries payload data. Note
218 * that this does not reflect if the data pointer of the packet is
219 * valid or not.
220 */
221 bool hasData() const { return testCmdAttrib(HasData); }
222 bool isLLSC() const { return testCmdAttrib(IsLlsc); }
223 bool isSWPrefetch() const { return testCmdAttrib(IsSWPrefetch); }
224 bool isHWPrefetch() const { return testCmdAttrib(IsHWPrefetch); }
225 bool isPrefetch() const { return testCmdAttrib(IsSWPrefetch) ||
226 testCmdAttrib(IsHWPrefetch); }
227 bool isError() const { return testCmdAttrib(IsError); }
228 bool isPrint() const { return testCmdAttrib(IsPrint); }
229 bool isFlush() const { return testCmdAttrib(IsFlush); }
230
231 Command
232 responseCommand() const
233 {
234 return commandInfo[cmd].response;
235 }
236
237 /// Return the string to a cmd given by idx.
238 const std::string &toString() const { return commandInfo[cmd].str; }
239 int toInt() const { return (int)cmd; }
240
241 MemCmd(Command _cmd) : cmd(_cmd) { }
242 MemCmd(int _cmd) : cmd((Command)_cmd) { }
243 MemCmd() : cmd(InvalidCmd) { }
244
245 bool operator==(MemCmd c2) const { return (cmd == c2.cmd); }
246 bool operator!=(MemCmd c2) const { return (cmd != c2.cmd); }
247};
248
249/**
250 * A Packet is used to encapsulate a transfer between two objects in
251 * the memory system (e.g., the L1 and L2 cache). (In contrast, a
252 * single Request travels all the way from the requester to the
253 * ultimate destination and back, possibly being conveyed by several
254 * different Packets along the way.)
255 */
256class Packet : public Printable
257{
258 public:
259 typedef uint32_t FlagsType;
260 typedef ::Flags<FlagsType> Flags;
261
262 private:
263
264 enum : FlagsType {
265 // Flags to transfer across when copying a packet
266 COPY_FLAGS = 0x0000003F,
267
268 // Does this packet have sharers (which means it should not be
269 // considered writable) or not. See setHasSharers below.
270 HAS_SHARERS = 0x00000001,
271
272 // Special control flags
273 /// Special timing-mode atomic snoop for multi-level coherence.
274 EXPRESS_SNOOP = 0x00000002,
275
276 /// Allow a responding cache to inform the cache hierarchy
277 /// that it had a writable copy before responding. See
278 /// setResponderHadWritable below.
279 RESPONDER_HAD_WRITABLE = 0x00000004,
280
281 // Snoop co-ordination flag to indicate that a cache is
282 // responding to a snoop. See setCacheResponding below.
283 CACHE_RESPONDING = 0x00000008,
284
285 // The writeback/writeclean should be propagated further
286 // downstream by the receiver
287 WRITE_THROUGH = 0x00000010,
288
289 // Response co-ordination flag for cache maintenance
290 // operations
291 SATISFIED = 0x00000020,
292
293 /// Are the 'addr' and 'size' fields valid?
294 VALID_ADDR = 0x00000100,
295 VALID_SIZE = 0x00000200,
296
297 /// Is the data pointer set to a value that shouldn't be freed
298 /// when the packet is destroyed?
299 STATIC_DATA = 0x00001000,
300 /// The data pointer points to a value that should be freed when
301 /// the packet is destroyed. The pointer is assumed to be pointing
302 /// to an array, and delete [] is consequently called
303 DYNAMIC_DATA = 0x00002000,
304
305 /// suppress the error if this packet encounters a functional
306 /// access failure.
307 SUPPRESS_FUNC_ERROR = 0x00008000,
308
309 // Signal block present to squash prefetch and cache evict packets
310 // through express snoop flag
311 BLOCK_CACHED = 0x00010000
312 };
313
314 Flags flags;
315
316 public:
317 typedef MemCmd::Command Command;
318
319 /// The command field of the packet.
320 MemCmd cmd;
321
322 const PacketId id;
323
324 /// A pointer to the original request.
325 RequestPtr req;
326
327 private:
328 /**
329 * A pointer to the data being transferred. It can be different
330 * sizes at each level of the hierarchy so it belongs to the
331 * packet, not request. This may or may not be populated when a
332 * responder receives the packet. If not populated memory should
333 * be allocated.
334 */
335 PacketDataPtr data;
336
337 /// The address of the request. This address could be virtual or
338 /// physical, depending on the system configuration.
339 Addr addr;
340
341 /// True if the request targets the secure memory space.
342 bool _isSecure;
343
344 /// The size of the request or transfer.
345 unsigned size;
346
347 /**
348 * Track the bytes found that satisfy a functional read.
349 */
350 std::vector<bool> bytesValid;
351
352 // Quality of Service priority value
353 uint8_t _qosValue;
354
355 public:
356
357 /**
358 * The extra delay from seeing the packet until the header is
359 * transmitted. This delay is used to communicate the crossbar
360 * forwarding latency to the neighbouring object (e.g. a cache)
361 * that actually makes the packet wait. As the delay is relative,
362 * a 32-bit unsigned should be sufficient.
363 */
364 uint32_t headerDelay;
365
366 /**
367 * Keep track of the extra delay incurred by snooping upwards
368 * before sending a request down the memory system. This is used
369 * by the coherent crossbar to account for the additional request
370 * delay.
371 */
372 uint32_t snoopDelay;
373
374 /**
375 * The extra pipelining delay from seeing the packet until the end of
376 * payload is transmitted by the component that provided it (if
377 * any). This includes the header delay. Similar to the header
378 * delay, this is used to make up for the fact that the
379 * crossbar does not make the packet wait. As the delay is
380 * relative, a 32-bit unsigned should be sufficient.
381 */
382 uint32_t payloadDelay;
383
384 /**
385 * A virtual base opaque structure used to hold state associated
386 * with the packet (e.g., an MSHR), specific to a MemObject that
387 * sees the packet. A pointer to this state is returned in the
388 * packet's response so that the MemObject in question can quickly
389 * look up the state needed to process it. A specific subclass
390 * would be derived from this to carry state specific to a
391 * particular sending device.
392 *
393 * As multiple MemObjects may add their SenderState throughout the
394 * memory system, the SenderStates create a stack, where a
395 * MemObject can add a new Senderstate, as long as the
396 * predecessing SenderState is restored when the response comes
397 * back. For this reason, the predecessor should always be
398 * populated with the current SenderState of a packet before
399 * modifying the senderState field in the request packet.
400 */
401 struct SenderState
402 {
403 SenderState* predecessor;
404 SenderState() : predecessor(NULL) {}
405 virtual ~SenderState() {}
406 };
407
408 /**
409 * Object used to maintain state of a PrintReq. The senderState
410 * field of a PrintReq should always be of this type.
411 */
412 class PrintReqState : public SenderState
413 {
414 private:
415 /**
416 * An entry in the label stack.
417 */
418 struct LabelStackEntry
419 {
420 const std::string label;
421 std::string *prefix;
422 bool labelPrinted;
423 LabelStackEntry(const std::string &_label, std::string *_prefix);
424 };
425
426 typedef std::list<LabelStackEntry> LabelStack;
427 LabelStack labelStack;
428
429 std::string *curPrefixPtr;
430
431 public:
432 std::ostream &os;
433 const int verbosity;
434
435 PrintReqState(std::ostream &os, int verbosity = 0);
436 ~PrintReqState();
437
438 /**
439 * Returns the current line prefix.
440 */
441 const std::string &curPrefix() { return *curPrefixPtr; }
442
443 /**
444 * Push a label onto the label stack, and prepend the given
445 * prefix string onto the current prefix. Labels will only be
446 * printed if an object within the label's scope is printed.
447 */
448 void pushLabel(const std::string &lbl,
449 const std::string &prefix = " ");
450
451 /**
452 * Pop a label off the label stack.
453 */
454 void popLabel();
455
456 /**
457 * Print all of the pending unprinted labels on the
458 * stack. Called by printObj(), so normally not called by
459 * users unless bypassing printObj().
460 */
461 void printLabels();
462
463 /**
464 * Print a Printable object to os, because it matched the
465 * address on a PrintReq.
466 */
467 void printObj(Printable *obj);
468 };
469
470 /**
471 * This packet's sender state. Devices should use dynamic_cast<>
472 * to cast to the state appropriate to the sender. The intent of
473 * this variable is to allow a device to attach extra information
474 * to a request. A response packet must return the sender state
475 * that was attached to the original request (even if a new packet
476 * is created).
477 */
478 SenderState *senderState;
479
480 /**
481 * Push a new sender state to the packet and make the current
482 * sender state the predecessor of the new one. This should be
483 * prefered over direct manipulation of the senderState member
484 * variable.
485 *
486 * @param sender_state SenderState to push at the top of the stack
487 */
488 void pushSenderState(SenderState *sender_state);
489
490 /**
491 * Pop the top of the state stack and return a pointer to it. This
492 * assumes the current sender state is not NULL. This should be
493 * preferred over direct manipulation of the senderState member
494 * variable.
495 *
496 * @return The current top of the stack
497 */
498 SenderState *popSenderState();
499
500 /**
501 * Go through the sender state stack and return the first instance
502 * that is of type T (as determined by a dynamic_cast). If there
503 * is no sender state of type T, NULL is returned.
504 *
505 * @return The topmost state of type T
506 */
507 template <typename T>
508 T * findNextSenderState() const
509 {
510 T *t = NULL;
511 SenderState* sender_state = senderState;
512 while (t == NULL && sender_state != NULL) {
513 t = dynamic_cast<T*>(sender_state);
514 sender_state = sender_state->predecessor;
515 }
516 return t;
517 }
518
519 /// Return the string name of the cmd field (for debugging and
520 /// tracing).
521 const std::string &cmdString() const { return cmd.toString(); }
522
523 /// Return the index of this command.
524 inline int cmdToIndex() const { return cmd.toInt(); }
525
526 bool isRead() const { return cmd.isRead(); }
527 bool isWrite() const { return cmd.isWrite(); }
528 bool isUpgrade() const { return cmd.isUpgrade(); }
529 bool isRequest() const { return cmd.isRequest(); }
530 bool isResponse() const { return cmd.isResponse(); }
531 bool needsWritable() const
532 {
533 // we should never check if a response needsWritable, the
534 // request has this flag, and for a response we should rather
535 // look at the hasSharers flag (if not set, the response is to
536 // be considered writable)
537 assert(isRequest());
538 return cmd.needsWritable();
539 }
540 bool needsResponse() const { return cmd.needsResponse(); }
541 bool isInvalidate() const { return cmd.isInvalidate(); }
542 bool isEviction() const { return cmd.isEviction(); }
543 bool isClean() const { return cmd.isClean(); }
544 bool fromCache() const { return cmd.fromCache(); }
545 bool isWriteback() const { return cmd.isWriteback(); }
546 bool hasData() const { return cmd.hasData(); }
547 bool hasRespData() const
548 {
549 MemCmd resp_cmd = cmd.responseCommand();
550 return resp_cmd.hasData();
551 }
552 bool isLLSC() const { return cmd.isLLSC(); }
553 bool isError() const { return cmd.isError(); }
554 bool isPrint() const { return cmd.isPrint(); }
555 bool isFlush() const { return cmd.isFlush(); }
556
557 bool isWholeLineWrite(unsigned blk_size)
558 {
559 return (cmd == MemCmd::WriteReq || cmd == MemCmd::WriteLineReq) &&
560 getOffset(blk_size) == 0 && getSize() == blk_size;
561 }
562
563 //@{
564 /// Snoop flags
565 /**
566 * Set the cacheResponding flag. This is used by the caches to
567 * signal another cache that they are responding to a request. A
568 * cache will only respond to snoops if it has the line in either
569 * Modified or Owned state. Note that on snoop hits we always pass
570 * the line as Modified and never Owned. In the case of an Owned
571 * line we proceed to invalidate all other copies.
572 *
573 * On a cache fill (see Cache::handleFill), we check hasSharers
574 * first, ignoring the cacheResponding flag if hasSharers is set.
575 * A line is consequently allocated as:
576 *
577 * hasSharers cacheResponding state
578 * true false Shared
579 * true true Shared
580 * false false Exclusive
581 * false true Modified
582 */
583 void setCacheResponding()
584 {
585 assert(isRequest());
586 assert(!flags.isSet(CACHE_RESPONDING));
587 flags.set(CACHE_RESPONDING);
588 }
589 bool cacheResponding() const { return flags.isSet(CACHE_RESPONDING); }
590 /**
591 * On fills, the hasSharers flag is used by the caches in
592 * combination with the cacheResponding flag, as clarified
593 * above. If the hasSharers flag is not set, the packet is passing
594 * writable. Thus, a response from a memory passes the line as
595 * writable by default.
596 *
597 * The hasSharers flag is also used by upstream caches to inform a
598 * downstream cache that they have the block (by calling
599 * setHasSharers on snoop request packets that hit in upstream
600 * cachs tags or MSHRs). If the snoop packet has sharers, a
601 * downstream cache is prevented from passing a dirty line upwards
602 * if it was not explicitly asked for a writable copy. See
603 * Cache::satisfyCpuSideRequest.
604 *
605 * The hasSharers flag is also used on writebacks, in
606 * combination with the WritbackClean or WritebackDirty commands,
607 * to allocate the block downstream either as:
608 *
609 * command hasSharers state
610 * WritebackDirty false Modified
611 * WritebackDirty true Owned
612 * WritebackClean false Exclusive
613 * WritebackClean true Shared
614 */
615 void setHasSharers() { flags.set(HAS_SHARERS); }
616 bool hasSharers() const { return flags.isSet(HAS_SHARERS); }
617 //@}
618
619 /**
620 * The express snoop flag is used for two purposes. Firstly, it is
621 * used to bypass flow control for normal (non-snoop) requests
622 * going downstream in the memory system. In cases where a cache
623 * is responding to a snoop from another cache (it had a dirty
624 * line), but the line is not writable (and there are possibly
625 * other copies), the express snoop flag is set by the downstream
626 * cache to invalidate all other copies in zero time. Secondly,
627 * the express snoop flag is also set to be able to distinguish
628 * snoop packets that came from a downstream cache, rather than
629 * snoop packets from neighbouring caches.
630 */
631 void setExpressSnoop() { flags.set(EXPRESS_SNOOP); }
632 bool isExpressSnoop() const { return flags.isSet(EXPRESS_SNOOP); }
633
634 /**
635 * On responding to a snoop request (which only happens for
636 * Modified or Owned lines), make sure that we can transform an
637 * Owned response to a Modified one. If this flag is not set, the
638 * responding cache had the line in the Owned state, and there are
639 * possibly other Shared copies in the memory system. A downstream
640 * cache helps in orchestrating the invalidation of these copies
641 * by sending out the appropriate express snoops.
642 */
643 void setResponderHadWritable()
644 {
645 assert(cacheResponding());
646 assert(!responderHadWritable());
647 flags.set(RESPONDER_HAD_WRITABLE);
648 }
649 bool responderHadWritable() const
650 { return flags.isSet(RESPONDER_HAD_WRITABLE); }
651
652 /**
653 * A writeback/writeclean cmd gets propagated further downstream
654 * by the receiver when the flag is set.
655 */
656 void setWriteThrough()
657 {
658 assert(cmd.isWrite() &&
659 (cmd.isEviction() || cmd == MemCmd::WriteClean));
660 flags.set(WRITE_THROUGH);
661 }
662 void clearWriteThrough() { flags.clear(WRITE_THROUGH); }
663 bool writeThrough() const { return flags.isSet(WRITE_THROUGH); }
664
665 /**
666 * Set when a request hits in a cache and the cache is not going
667 * to respond. This is used by the crossbar to coordinate
668 * responses for cache maintenance operations.
669 */
670 void setSatisfied()
671 {
672 assert(cmd.isClean());
673 assert(!flags.isSet(SATISFIED));
674 flags.set(SATISFIED);
675 }
676 bool satisfied() const { return flags.isSet(SATISFIED); }
677
678 void setSuppressFuncError() { flags.set(SUPPRESS_FUNC_ERROR); }
679 bool suppressFuncError() const { return flags.isSet(SUPPRESS_FUNC_ERROR); }
680 void setBlockCached() { flags.set(BLOCK_CACHED); }
681 bool isBlockCached() const { return flags.isSet(BLOCK_CACHED); }
682 void clearBlockCached() { flags.clear(BLOCK_CACHED); }
683
684 /**
685 * QoS Value getter
686 * Returns 0 if QoS value was never set (constructor default).
687 *
688 * @return QoS priority value of the packet
689 */
690 inline uint8_t qosValue() const { return _qosValue; }
691
692 /**
693 * QoS Value setter
694 * Interface for setting QoS priority value of the packet.
695 *
696 * @param qos_value QoS priority value
697 */
698 inline void qosValue(const uint8_t qos_value)
699 { _qosValue = qos_value; }
700
701 inline MasterID masterId() const { return req->masterId(); }
702
703 // Network error conditions... encapsulate them as methods since
704 // their encoding keeps changing (from result field to command
705 // field, etc.)
706 void
707 setBadAddress()
708 {
709 assert(isResponse());
710 cmd = MemCmd::BadAddressError;
711 }
712
713 void copyError(Packet *pkt) { assert(pkt->isError()); cmd = pkt->cmd; }
714
715 Addr getAddr() const { assert(flags.isSet(VALID_ADDR)); return addr; }
716 /**
717 * Update the address of this packet mid-transaction. This is used
718 * by the address mapper to change an already set address to a new
719 * one based on the system configuration. It is intended to remap
720 * an existing address, so it asserts that the current address is
721 * valid.
722 */
723 void setAddr(Addr _addr) { assert(flags.isSet(VALID_ADDR)); addr = _addr; }
724
725 unsigned getSize() const { assert(flags.isSet(VALID_SIZE)); return size; }
726
727 Addr getOffset(unsigned int blk_size) const
728 {
729 return getAddr() & Addr(blk_size - 1);
730 }
731
732 Addr getBlockAddr(unsigned int blk_size) const
733 {
734 return getAddr() & ~(Addr(blk_size - 1));
735 }
736
737 bool isSecure() const
738 {
739 assert(flags.isSet(VALID_ADDR));
740 return _isSecure;
741 }
742
743 /**
744 * Accessor function to atomic op.
745 */
746 AtomicOpFunctor *getAtomicOp() const { return req->getAtomicOpFunctor(); }
747 bool isAtomicOp() const { return req->isAtomic(); }
748
749 /**
750 * It has been determined that the SC packet should successfully update
751 * memory. Therefore, convert this SC packet to a normal write.
752 */
753 void
754 convertScToWrite()
755 {
756 assert(isLLSC());
757 assert(isWrite());
758 cmd = MemCmd::WriteReq;
759 }
760
761 /**
762 * When ruby is in use, Ruby will monitor the cache line and the
763 * phys memory should treat LL ops as normal reads.
764 */
765 void
766 convertLlToRead()
767 {
768 assert(isLLSC());
769 assert(isRead());
770 cmd = MemCmd::ReadReq;
771 }
772
773 /**
774 * Constructor. Note that a Request object must be constructed
775 * first, but the Requests's physical address and size fields need
776 * not be valid. The command must be supplied.
777 */
778 Packet(const RequestPtr &_req, MemCmd _cmd)
779 : cmd(_cmd), id((PacketId)_req.get()), req(_req),
780 data(nullptr), addr(0), _isSecure(false), size(0),
781 _qosValue(0), headerDelay(0), snoopDelay(0),
782 payloadDelay(0), senderState(NULL)
783 {
784 if (req->hasPaddr()) {
785 addr = req->getPaddr();
786 flags.set(VALID_ADDR);
787 _isSecure = req->isSecure();
788 }
789 if (req->hasSize()) {
790 size = req->getSize();
791 flags.set(VALID_SIZE);
792 }
793 }
794
795 /**
796 * Alternate constructor if you are trying to create a packet with
797 * a request that is for a whole block, not the address from the
798 * req. this allows for overriding the size/addr of the req.
799 */
800 Packet(const RequestPtr &_req, MemCmd _cmd, int _blkSize, PacketId _id = 0)
801 : cmd(_cmd), id(_id ? _id : (PacketId)_req.get()), req(_req),
802 data(nullptr), addr(0), _isSecure(false),
803 _qosValue(0), headerDelay(0),
804 snoopDelay(0), payloadDelay(0), senderState(NULL)
805 {
806 if (req->hasPaddr()) {
807 addr = req->getPaddr() & ~(_blkSize - 1);
808 flags.set(VALID_ADDR);
809 _isSecure = req->isSecure();
810 }
811 size = _blkSize;
812 flags.set(VALID_SIZE);
813 }
814
815 /**
816 * Alternate constructor for copying a packet. Copy all fields
817 * *except* if the original packet's data was dynamic, don't copy
818 * that, as we can't guarantee that the new packet's lifetime is
819 * less than that of the original packet. In this case the new
820 * packet should allocate its own data.
821 */
822 Packet(const PacketPtr pkt, bool clear_flags, bool alloc_data)
823 : cmd(pkt->cmd), id(pkt->id), req(pkt->req),
824 data(nullptr),
825 addr(pkt->addr), _isSecure(pkt->_isSecure), size(pkt->size),
826 bytesValid(pkt->bytesValid),
827 _qosValue(pkt->qosValue()),
828 headerDelay(pkt->headerDelay),
829 snoopDelay(0),
830 payloadDelay(pkt->payloadDelay),
831 senderState(pkt->senderState)
832 {
833 if (!clear_flags)
834 flags.set(pkt->flags & COPY_FLAGS);
835
836 flags.set(pkt->flags & (VALID_ADDR|VALID_SIZE));
837
838 // should we allocate space for data, or not, the express
839 // snoops do not need to carry any data as they only serve to
840 // co-ordinate state changes
841 if (alloc_data) {
842 // even if asked to allocate data, if the original packet
843 // holds static data, then the sender will not be doing
844 // any memcpy on receiving the response, thus we simply
845 // carry the pointer forward
846 if (pkt->flags.isSet(STATIC_DATA)) {
847 data = pkt->data;
848 flags.set(STATIC_DATA);
849 } else {
850 allocate();
851 }
852 }
853 }
854
855 /**
856 * Generate the appropriate read MemCmd based on the Request flags.
857 */
858 static MemCmd
859 makeReadCmd(const RequestPtr &req)
860 {
861 if (req->isLLSC())
862 return MemCmd::LoadLockedReq;
|
862 else if (req->isPrefetch())
863 return MemCmd::SoftPFReq;
864 else
865 return MemCmd::ReadReq;
866 }
867
868 /**
869 * Generate the appropriate write MemCmd based on the Request flags.
870 */
871 static MemCmd
872 makeWriteCmd(const RequestPtr &req)
873 {
874 if (req->isLLSC())
875 return MemCmd::StoreCondReq;
876 else if (req->isSwap() || req->isAtomic())
877 return MemCmd::SwapReq;
878 else if (req->isCacheInvalidate()) {
879 return req->isCacheClean() ? MemCmd::CleanInvalidReq :
880 MemCmd::InvalidateReq;
881 } else if (req->isCacheClean()) {
882 return MemCmd::CleanSharedReq;
883 } else
884 return MemCmd::WriteReq;
885 }
886
887 /**
888 * Constructor-like methods that return Packets based on Request objects.
889 * Fine-tune the MemCmd type if it's not a vanilla read or write.
890 */
891 static PacketPtr
892 createRead(const RequestPtr &req)
893 {
894 return new Packet(req, makeReadCmd(req));
895 }
896
897 static PacketPtr
898 createWrite(const RequestPtr &req)
899 {
900 return new Packet(req, makeWriteCmd(req));
901 }
902
903 /**
904 * clean up packet variables
905 */
906 ~Packet()
907 {
908 deleteData();
909 }
910
911 /**
912 * Take a request packet and modify it in place to be suitable for
913 * returning as a response to that request.
914 */
915 void
916 makeResponse()
917 {
918 assert(needsResponse());
919 assert(isRequest());
920 cmd = cmd.responseCommand();
921
922 // responses are never express, even if the snoop that
923 // triggered them was
924 flags.clear(EXPRESS_SNOOP);
925 }
926
927 void
928 makeAtomicResponse()
929 {
930 makeResponse();
931 }
932
933 void
934 makeTimingResponse()
935 {
936 makeResponse();
937 }
938
939 void
940 setFunctionalResponseStatus(bool success)
941 {
942 if (!success) {
943 if (isWrite()) {
944 cmd = MemCmd::FunctionalWriteError;
945 } else {
946 cmd = MemCmd::FunctionalReadError;
947 }
948 }
949 }
950
951 void
952 setSize(unsigned size)
953 {
954 assert(!flags.isSet(VALID_SIZE));
955
956 this->size = size;
957 flags.set(VALID_SIZE);
958 }
959
960
961 public:
962 /**
963 * @{
964 * @name Data accessor mehtods
965 */
966
967 /**
968 * Set the data pointer to the following value that should not be
969 * freed. Static data allows us to do a single memcpy even if
970 * multiple packets are required to get from source to destination
971 * and back. In essence the pointer is set calling dataStatic on
972 * the original packet, and whenever this packet is copied and
973 * forwarded the same pointer is passed on. When a packet
974 * eventually reaches the destination holding the data, it is
975 * copied once into the location originally set. On the way back
976 * to the source, no copies are necessary.
977 */
978 template <typename T>
979 void
980 dataStatic(T *p)
981 {
982 assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
983 data = (PacketDataPtr)p;
984 flags.set(STATIC_DATA);
985 }
986
987 /**
988 * Set the data pointer to the following value that should not be
989 * freed. This version of the function allows the pointer passed
990 * to us to be const. To avoid issues down the line we cast the
991 * constness away, the alternative would be to keep both a const
992 * and non-const data pointer and cleverly choose between
993 * them. Note that this is only allowed for static data.
994 */
995 template <typename T>
996 void
997 dataStaticConst(const T *p)
998 {
999 assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
1000 data = const_cast<PacketDataPtr>(p);
1001 flags.set(STATIC_DATA);
1002 }
1003
1004 /**
1005 * Set the data pointer to a value that should have delete []
1006 * called on it. Dynamic data is local to this packet, and as the
1007 * packet travels from source to destination, forwarded packets
1008 * will allocate their own data. When a packet reaches the final
1009 * destination it will populate the dynamic data of that specific
1010 * packet, and on the way back towards the source, memcpy will be
1011 * invoked in every step where a new packet was created e.g. in
1012 * the caches. Ultimately when the response reaches the source a
1013 * final memcpy is needed to extract the data from the packet
1014 * before it is deallocated.
1015 */
1016 template <typename T>
1017 void
1018 dataDynamic(T *p)
1019 {
1020 assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
1021 data = (PacketDataPtr)p;
1022 flags.set(DYNAMIC_DATA);
1023 }
1024
1025 /**
1026 * get a pointer to the data ptr.
1027 */
1028 template <typename T>
1029 T*
1030 getPtr()
1031 {
1032 assert(flags.isSet(STATIC_DATA|DYNAMIC_DATA));
1033 return (T*)data;
1034 }
1035
1036 template <typename T>
1037 const T*
1038 getConstPtr() const
1039 {
1040 assert(flags.isSet(STATIC_DATA|DYNAMIC_DATA));
1041 return (const T*)data;
1042 }
1043
1044 /**
1045 * Get the data in the packet byte swapped from big endian to
1046 * host endian.
1047 */
1048 template <typename T>
1049 T getBE() const;
1050
1051 /**
1052 * Get the data in the packet byte swapped from little endian to
1053 * host endian.
1054 */
1055 template <typename T>
1056 T getLE() const;
1057
1058 /**
1059 * Get the data in the packet byte swapped from the specified
1060 * endianness.
1061 */
1062 template <typename T>
1063 T get(ByteOrder endian) const;
1064
1065#if THE_ISA != NULL_ISA
1066 /**
1067 * Get the data in the packet byte swapped from guest to host
1068 * endian.
1069 */
1070 template <typename T>
1071 T get() const
1072 M5_DEPRECATED_MSG("The memory system should be ISA independent.");
1073#endif
1074
1075 /** Set the value in the data pointer to v as big endian. */
1076 template <typename T>
1077 void setBE(T v);
1078
1079 /** Set the value in the data pointer to v as little endian. */
1080 template <typename T>
1081 void setLE(T v);
1082
1083 /**
1084 * Set the value in the data pointer to v using the specified
1085 * endianness.
1086 */
1087 template <typename T>
1088 void set(T v, ByteOrder endian);
1089
1090#if THE_ISA != NULL_ISA
1091 /** Set the value in the data pointer to v as guest endian. */
1092 template <typename T>
1093 void set(T v)
1094 M5_DEPRECATED_MSG("The memory system should be ISA independent.");
1095#endif
1096
1097 /**
1098 * Get the data in the packet byte swapped from the specified
1099 * endianness and zero-extended to 64 bits.
1100 */
1101 uint64_t getUintX(ByteOrder endian) const;
1102
1103 /**
1104 * Set the value in the word w after truncating it to the length
1105 * of the packet and then byteswapping it to the desired
1106 * endianness.
1107 */
1108 void setUintX(uint64_t w, ByteOrder endian);
1109
1110 /**
1111 * Copy data into the packet from the provided pointer.
1112 */
1113 void
1114 setData(const uint8_t *p)
1115 {
1116 // we should never be copying data onto itself, which means we
1117 // must idenfity packets with static data, as they carry the
1118 // same pointer from source to destination and back
1119 assert(p != getPtr<uint8_t>() || flags.isSet(STATIC_DATA));
1120
1121 if (p != getPtr<uint8_t>())
1122 // for packet with allocated dynamic data, we copy data from
1123 // one to the other, e.g. a forwarded response to a response
1124 std::memcpy(getPtr<uint8_t>(), p, getSize());
1125 }
1126
1127 /**
1128 * Copy data into the packet from the provided block pointer,
1129 * which is aligned to the given block size.
1130 */
1131 void
1132 setDataFromBlock(const uint8_t *blk_data, int blkSize)
1133 {
1134 setData(blk_data + getOffset(blkSize));
1135 }
1136
1137 /**
1138 * Copy data from the packet to the memory at the provided pointer.
1139 * @param p Pointer to which data will be copied.
1140 */
1141 void
1142 writeData(uint8_t *p) const
1143 {
1144 std::memcpy(p, getConstPtr<uint8_t>(), getSize());
1145 }
1146
1147 /**
1148 * Copy data from the packet to the provided block pointer, which
1149 * is aligned to the given block size.
1150 * @param blk_data Pointer to block to which data will be copied.
1151 * @param blkSize Block size in bytes.
1152 */
1153 void
1154 writeDataToBlock(uint8_t *blk_data, int blkSize) const
1155 {
1156 writeData(blk_data + getOffset(blkSize));
1157 }
1158
1159 /**
1160 * delete the data pointed to in the data pointer. Ok to call to
1161 * matter how data was allocted.
1162 */
1163 void
1164 deleteData()
1165 {
1166 if (flags.isSet(DYNAMIC_DATA))
1167 delete [] data;
1168
1169 flags.clear(STATIC_DATA|DYNAMIC_DATA);
1170 data = NULL;
1171 }
1172
1173 /** Allocate memory for the packet. */
1174 void
1175 allocate()
1176 {
1177 // if either this command or the response command has a data
1178 // payload, actually allocate space
1179 if (hasData() || hasRespData()) {
1180 assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
1181 flags.set(DYNAMIC_DATA);
1182 data = new uint8_t[getSize()];
1183 }
1184 }
1185
1186 /** @} */
1187
1188 /** Get the data in the packet without byte swapping. */
1189 template <typename T>
1190 T getRaw() const;
1191
1192 /** Set the value in the data pointer to v without byte swapping. */
1193 template <typename T>
1194 void setRaw(T v);
1195
1196 public:
1197 /**
1198 * Check a functional request against a memory value stored in
1199 * another packet (i.e. an in-transit request or
1200 * response). Returns true if the current packet is a read, and
1201 * the other packet provides the data, which is then copied to the
1202 * current packet. If the current packet is a write, and the other
1203 * packet intersects this one, then we update the data
1204 * accordingly.
1205 */
1206 bool
1207 trySatisfyFunctional(PacketPtr other)
1208 {
1209 // all packets that are carrying a payload should have a valid
1210 // data pointer
1211 return trySatisfyFunctional(other, other->getAddr(), other->isSecure(),
1212 other->getSize(),
1213 other->hasData() ?
1214 other->getPtr<uint8_t>() : NULL);
1215 }
1216
1217 /**
1218 * Does the request need to check for cached copies of the same block
1219 * in the memory hierarchy above.
1220 **/
1221 bool
1222 mustCheckAbove() const
1223 {
1224 return cmd == MemCmd::HardPFReq || isEviction();
1225 }
1226
1227 /**
1228 * Is this packet a clean eviction, including both actual clean
1229 * evict packets, but also clean writebacks.
1230 */
1231 bool
1232 isCleanEviction() const
1233 {
1234 return cmd == MemCmd::CleanEvict || cmd == MemCmd::WritebackClean;
1235 }
1236
1237 /**
1238 * Check a functional request against a memory value represented
1239 * by a base/size pair and an associated data array. If the
1240 * current packet is a read, it may be satisfied by the memory
1241 * value. If the current packet is a write, it may update the
1242 * memory value.
1243 */
1244 bool
1245 trySatisfyFunctional(Printable *obj, Addr base, bool is_secure, int size,
1246 uint8_t *_data);
1247
1248 /**
1249 * Push label for PrintReq (safe to call unconditionally).
1250 */
1251 void
1252 pushLabel(const std::string &lbl)
1253 {
1254 if (isPrint())
1255 safe_cast<PrintReqState*>(senderState)->pushLabel(lbl);
1256 }
1257
1258 /**
1259 * Pop label for PrintReq (safe to call unconditionally).
1260 */
1261 void
1262 popLabel()
1263 {
1264 if (isPrint())
1265 safe_cast<PrintReqState*>(senderState)->popLabel();
1266 }
1267
1268 void print(std::ostream &o, int verbosity = 0,
1269 const std::string &prefix = "") const;
1270
1271 /**
1272 * A no-args wrapper of print(std::ostream...)
1273 * meant to be invoked from DPRINTFs
1274 * avoiding string overheads in fast mode
1275 * @return string with the request's type and start<->end addresses
1276 */
1277 std::string print() const;
1278};
1279
1280#endif //__MEM_PACKET_HH
| 865 else if (req->isPrefetch())
866 return MemCmd::SoftPFReq;
867 else
868 return MemCmd::ReadReq;
869 }
870
871 /**
872 * Generate the appropriate write MemCmd based on the Request flags.
873 */
874 static MemCmd
875 makeWriteCmd(const RequestPtr &req)
876 {
877 if (req->isLLSC())
878 return MemCmd::StoreCondReq;
879 else if (req->isSwap() || req->isAtomic())
880 return MemCmd::SwapReq;
881 else if (req->isCacheInvalidate()) {
882 return req->isCacheClean() ? MemCmd::CleanInvalidReq :
883 MemCmd::InvalidateReq;
884 } else if (req->isCacheClean()) {
885 return MemCmd::CleanSharedReq;
886 } else
887 return MemCmd::WriteReq;
888 }
889
890 /**
891 * Constructor-like methods that return Packets based on Request objects.
892 * Fine-tune the MemCmd type if it's not a vanilla read or write.
893 */
894 static PacketPtr
895 createRead(const RequestPtr &req)
896 {
897 return new Packet(req, makeReadCmd(req));
898 }
899
900 static PacketPtr
901 createWrite(const RequestPtr &req)
902 {
903 return new Packet(req, makeWriteCmd(req));
904 }
905
906 /**
907 * clean up packet variables
908 */
909 ~Packet()
910 {
911 deleteData();
912 }
913
914 /**
915 * Take a request packet and modify it in place to be suitable for
916 * returning as a response to that request.
917 */
918 void
919 makeResponse()
920 {
921 assert(needsResponse());
922 assert(isRequest());
923 cmd = cmd.responseCommand();
924
925 // responses are never express, even if the snoop that
926 // triggered them was
927 flags.clear(EXPRESS_SNOOP);
928 }
929
930 void
931 makeAtomicResponse()
932 {
933 makeResponse();
934 }
935
936 void
937 makeTimingResponse()
938 {
939 makeResponse();
940 }
941
942 void
943 setFunctionalResponseStatus(bool success)
944 {
945 if (!success) {
946 if (isWrite()) {
947 cmd = MemCmd::FunctionalWriteError;
948 } else {
949 cmd = MemCmd::FunctionalReadError;
950 }
951 }
952 }
953
954 void
955 setSize(unsigned size)
956 {
957 assert(!flags.isSet(VALID_SIZE));
958
959 this->size = size;
960 flags.set(VALID_SIZE);
961 }
962
963
964 public:
965 /**
966 * @{
967 * @name Data accessor mehtods
968 */
969
970 /**
971 * Set the data pointer to the following value that should not be
972 * freed. Static data allows us to do a single memcpy even if
973 * multiple packets are required to get from source to destination
974 * and back. In essence the pointer is set calling dataStatic on
975 * the original packet, and whenever this packet is copied and
976 * forwarded the same pointer is passed on. When a packet
977 * eventually reaches the destination holding the data, it is
978 * copied once into the location originally set. On the way back
979 * to the source, no copies are necessary.
980 */
981 template <typename T>
982 void
983 dataStatic(T *p)
984 {
985 assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
986 data = (PacketDataPtr)p;
987 flags.set(STATIC_DATA);
988 }
989
990 /**
991 * Set the data pointer to the following value that should not be
992 * freed. This version of the function allows the pointer passed
993 * to us to be const. To avoid issues down the line we cast the
994 * constness away, the alternative would be to keep both a const
995 * and non-const data pointer and cleverly choose between
996 * them. Note that this is only allowed for static data.
997 */
998 template <typename T>
999 void
1000 dataStaticConst(const T *p)
1001 {
1002 assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
1003 data = const_cast<PacketDataPtr>(p);
1004 flags.set(STATIC_DATA);
1005 }
1006
1007 /**
1008 * Set the data pointer to a value that should have delete []
1009 * called on it. Dynamic data is local to this packet, and as the
1010 * packet travels from source to destination, forwarded packets
1011 * will allocate their own data. When a packet reaches the final
1012 * destination it will populate the dynamic data of that specific
1013 * packet, and on the way back towards the source, memcpy will be
1014 * invoked in every step where a new packet was created e.g. in
1015 * the caches. Ultimately when the response reaches the source a
1016 * final memcpy is needed to extract the data from the packet
1017 * before it is deallocated.
1018 */
1019 template <typename T>
1020 void
1021 dataDynamic(T *p)
1022 {
1023 assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
1024 data = (PacketDataPtr)p;
1025 flags.set(DYNAMIC_DATA);
1026 }
1027
1028 /**
1029 * get a pointer to the data ptr.
1030 */
1031 template <typename T>
1032 T*
1033 getPtr()
1034 {
1035 assert(flags.isSet(STATIC_DATA|DYNAMIC_DATA));
1036 return (T*)data;
1037 }
1038
1039 template <typename T>
1040 const T*
1041 getConstPtr() const
1042 {
1043 assert(flags.isSet(STATIC_DATA|DYNAMIC_DATA));
1044 return (const T*)data;
1045 }
1046
1047 /**
1048 * Get the data in the packet byte swapped from big endian to
1049 * host endian.
1050 */
1051 template <typename T>
1052 T getBE() const;
1053
1054 /**
1055 * Get the data in the packet byte swapped from little endian to
1056 * host endian.
1057 */
1058 template <typename T>
1059 T getLE() const;
1060
1061 /**
1062 * Get the data in the packet byte swapped from the specified
1063 * endianness.
1064 */
1065 template <typename T>
1066 T get(ByteOrder endian) const;
1067
1068#if THE_ISA != NULL_ISA
1069 /**
1070 * Get the data in the packet byte swapped from guest to host
1071 * endian.
1072 */
1073 template <typename T>
1074 T get() const
1075 M5_DEPRECATED_MSG("The memory system should be ISA independent.");
1076#endif
1077
1078 /** Set the value in the data pointer to v as big endian. */
1079 template <typename T>
1080 void setBE(T v);
1081
1082 /** Set the value in the data pointer to v as little endian. */
1083 template <typename T>
1084 void setLE(T v);
1085
1086 /**
1087 * Set the value in the data pointer to v using the specified
1088 * endianness.
1089 */
1090 template <typename T>
1091 void set(T v, ByteOrder endian);
1092
1093#if THE_ISA != NULL_ISA
1094 /** Set the value in the data pointer to v as guest endian. */
1095 template <typename T>
1096 void set(T v)
1097 M5_DEPRECATED_MSG("The memory system should be ISA independent.");
1098#endif
1099
1100 /**
1101 * Get the data in the packet byte swapped from the specified
1102 * endianness and zero-extended to 64 bits.
1103 */
1104 uint64_t getUintX(ByteOrder endian) const;
1105
1106 /**
1107 * Set the value in the word w after truncating it to the length
1108 * of the packet and then byteswapping it to the desired
1109 * endianness.
1110 */
1111 void setUintX(uint64_t w, ByteOrder endian);
1112
1113 /**
1114 * Copy data into the packet from the provided pointer.
1115 */
1116 void
1117 setData(const uint8_t *p)
1118 {
1119 // we should never be copying data onto itself, which means we
1120 // must idenfity packets with static data, as they carry the
1121 // same pointer from source to destination and back
1122 assert(p != getPtr<uint8_t>() || flags.isSet(STATIC_DATA));
1123
1124 if (p != getPtr<uint8_t>())
1125 // for packet with allocated dynamic data, we copy data from
1126 // one to the other, e.g. a forwarded response to a response
1127 std::memcpy(getPtr<uint8_t>(), p, getSize());
1128 }
1129
1130 /**
1131 * Copy data into the packet from the provided block pointer,
1132 * which is aligned to the given block size.
1133 */
1134 void
1135 setDataFromBlock(const uint8_t *blk_data, int blkSize)
1136 {
1137 setData(blk_data + getOffset(blkSize));
1138 }
1139
1140 /**
1141 * Copy data from the packet to the memory at the provided pointer.
1142 * @param p Pointer to which data will be copied.
1143 */
1144 void
1145 writeData(uint8_t *p) const
1146 {
1147 std::memcpy(p, getConstPtr<uint8_t>(), getSize());
1148 }
1149
1150 /**
1151 * Copy data from the packet to the provided block pointer, which
1152 * is aligned to the given block size.
1153 * @param blk_data Pointer to block to which data will be copied.
1154 * @param blkSize Block size in bytes.
1155 */
1156 void
1157 writeDataToBlock(uint8_t *blk_data, int blkSize) const
1158 {
1159 writeData(blk_data + getOffset(blkSize));
1160 }
1161
1162 /**
1163 * delete the data pointed to in the data pointer. Ok to call to
1164 * matter how data was allocted.
1165 */
1166 void
1167 deleteData()
1168 {
1169 if (flags.isSet(DYNAMIC_DATA))
1170 delete [] data;
1171
1172 flags.clear(STATIC_DATA|DYNAMIC_DATA);
1173 data = NULL;
1174 }
1175
1176 /** Allocate memory for the packet. */
1177 void
1178 allocate()
1179 {
1180 // if either this command or the response command has a data
1181 // payload, actually allocate space
1182 if (hasData() || hasRespData()) {
1183 assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
1184 flags.set(DYNAMIC_DATA);
1185 data = new uint8_t[getSize()];
1186 }
1187 }
1188
1189 /** @} */
1190
1191 /** Get the data in the packet without byte swapping. */
1192 template <typename T>
1193 T getRaw() const;
1194
1195 /** Set the value in the data pointer to v without byte swapping. */
1196 template <typename T>
1197 void setRaw(T v);
1198
1199 public:
1200 /**
1201 * Check a functional request against a memory value stored in
1202 * another packet (i.e. an in-transit request or
1203 * response). Returns true if the current packet is a read, and
1204 * the other packet provides the data, which is then copied to the
1205 * current packet. If the current packet is a write, and the other
1206 * packet intersects this one, then we update the data
1207 * accordingly.
1208 */
1209 bool
1210 trySatisfyFunctional(PacketPtr other)
1211 {
1212 // all packets that are carrying a payload should have a valid
1213 // data pointer
1214 return trySatisfyFunctional(other, other->getAddr(), other->isSecure(),
1215 other->getSize(),
1216 other->hasData() ?
1217 other->getPtr<uint8_t>() : NULL);
1218 }
1219
1220 /**
1221 * Does the request need to check for cached copies of the same block
1222 * in the memory hierarchy above.
1223 **/
1224 bool
1225 mustCheckAbove() const
1226 {
1227 return cmd == MemCmd::HardPFReq || isEviction();
1228 }
1229
1230 /**
1231 * Is this packet a clean eviction, including both actual clean
1232 * evict packets, but also clean writebacks.
1233 */
1234 bool
1235 isCleanEviction() const
1236 {
1237 return cmd == MemCmd::CleanEvict || cmd == MemCmd::WritebackClean;
1238 }
1239
1240 /**
1241 * Check a functional request against a memory value represented
1242 * by a base/size pair and an associated data array. If the
1243 * current packet is a read, it may be satisfied by the memory
1244 * value. If the current packet is a write, it may update the
1245 * memory value.
1246 */
1247 bool
1248 trySatisfyFunctional(Printable *obj, Addr base, bool is_secure, int size,
1249 uint8_t *_data);
1250
1251 /**
1252 * Push label for PrintReq (safe to call unconditionally).
1253 */
1254 void
1255 pushLabel(const std::string &lbl)
1256 {
1257 if (isPrint())
1258 safe_cast<PrintReqState*>(senderState)->pushLabel(lbl);
1259 }
1260
1261 /**
1262 * Pop label for PrintReq (safe to call unconditionally).
1263 */
1264 void
1265 popLabel()
1266 {
1267 if (isPrint())
1268 safe_cast<PrintReqState*>(senderState)->popLabel();
1269 }
1270
1271 void print(std::ostream &o, int verbosity = 0,
1272 const std::string &prefix = "") const;
1273
1274 /**
1275 * A no-args wrapper of print(std::ostream...)
1276 * meant to be invoked from DPRINTFs
1277 * avoiding string overheads in fast mode
1278 * @return string with the request's type and start<->end addresses
1279 */
1280 std::string print() const;
1281};
1282
1283#endif //__MEM_PACKET_HH
|