dram_ctrl.hh (10213:2e630c6c2042) dram_ctrl.hh (10215:52d46098c1b6)
1/*
2 * Copyright (c) 2012-2014 ARM Limited
3 * All rights reserved
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder. You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2013 Amin Farmahini-Farahani
15 * All rights reserved.
16 *
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions are
19 * met: redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer;
21 * redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution;
24 * neither the name of the copyright holders nor the names of its
25 * contributors may be used to endorse or promote products derived from
26 * this software without specific prior written permission.
27 *
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 *
40 * Authors: Andreas Hansson
41 * Ani Udipi
42 * Neha Agarwal
43 */
44
45/**
46 * @file
47 * DRAMCtrl declaration
48 */
49
50#ifndef __MEM_DRAM_CTRL_HH__
51#define __MEM_DRAM_CTRL_HH__
52
53#include <deque>
54
55#include "base/statistics.hh"
56#include "enums/AddrMap.hh"
57#include "enums/MemSched.hh"
58#include "enums/PageManage.hh"
59#include "mem/abstract_mem.hh"
60#include "mem/qport.hh"
61#include "params/DRAMCtrl.hh"
62#include "sim/eventq.hh"
63
64/**
65 * The DRAM controller is a basic single-channel memory controller
66 * aiming to mimic a high-level DRAM controller and the most important
67 * timing constraints associated with the DRAM. The focus is really on
68 * modelling the impact on the system rather than the DRAM itself,
69 * hence the focus is on the controller model and not on the
70 * memory. By adhering to the correct timing constraints, ultimately
71 * there is no need for a memory model in addition to the controller
72 * model.
73 *
74 * As a basic design principle, this controller is not cycle callable,
75 * but instead uses events to decide when new decisions can be made,
76 * when resources become available, when things are to be considered
77 * done, and when to send things back. Through these simple
78 * principles, we achieve a performant model that is not
79 * cycle-accurate, but enables us to evaluate the system impact of a
80 * wide range of memory technologies, and also collect statistics
81 * about the use of the memory.
82 */
83class DRAMCtrl : public AbstractMemory
84{
85
86 private:
87
88 // For now, make use of a queued slave port to avoid dealing with
89 // flow control for the responses being sent back
90 class MemoryPort : public QueuedSlavePort
91 {
92
93 SlavePacketQueue queue;
94 DRAMCtrl& memory;
95
96 public:
97
98 MemoryPort(const std::string& name, DRAMCtrl& _memory);
99
100 protected:
101
102 Tick recvAtomic(PacketPtr pkt);
103
104 void recvFunctional(PacketPtr pkt);
105
106 bool recvTimingReq(PacketPtr);
107
108 virtual AddrRangeList getAddrRanges() const;
109
110 };
111
112 /**
113 * Our incoming port, for a multi-ported controller add a crossbar
114 * in front of it
115 */
116 MemoryPort port;
117
118 /**
119 * Remember if we have to retry a request when available.
120 */
121 bool retryRdReq;
122 bool retryWrReq;
123
124 /**
125 * Bus state used to control the read/write switching and drive
126 * the scheduling of the next request.
127 */
128 enum BusState {
129 READ = 0,
130 READ_TO_WRITE,
131 WRITE,
132 WRITE_TO_READ
133 };
134
135 BusState busState;
136
137 /** List to keep track of activate ticks */
138 std::vector<std::deque<Tick>> actTicks;
139
140 /**
141 * A basic class to track the bank state, i.e. what row is
142 * currently open (if any), when is the bank free to accept a new
143 * column (read/write) command, when can it be precharged, and
144 * when can it be activated.
145 *
146 * The bank also keeps track of how many bytes have been accessed
147 * in the open row since it was opened.
148 */
149 class Bank
150 {
151
152 public:
153
154 static const uint32_t NO_ROW = -1;
155
156 uint32_t openRow;
157
158 Tick colAllowedAt;
159 Tick preAllowedAt;
160 Tick actAllowedAt;
161
162 uint32_t rowAccesses;
163 uint32_t bytesAccessed;
164
165 Bank() :
166 openRow(NO_ROW), colAllowedAt(0), preAllowedAt(0), actAllowedAt(0),
167 rowAccesses(0), bytesAccessed(0)
168 { }
169 };
170
171 /**
172 * A burst helper helps organize and manage a packet that is larger than
173 * the DRAM burst size. A system packet that is larger than the burst size
174 * is split into multiple DRAM packets and all those DRAM packets point to
175 * a single burst helper such that we know when the whole packet is served.
176 */
177 class BurstHelper {
178
179 public:
180
181 /** Number of DRAM bursts requred for a system packet **/
182 const unsigned int burstCount;
183
184 /** Number of DRAM bursts serviced so far for a system packet **/
185 unsigned int burstsServiced;
186
187 BurstHelper(unsigned int _burstCount)
188 : burstCount(_burstCount), burstsServiced(0)
189 { }
190 };
191
192 /**
193 * A DRAM packet stores packets along with the timestamp of when
194 * the packet entered the queue, and also the decoded address.
195 */
196 class DRAMPacket {
197
198 public:
199
200 /** When did request enter the controller */
201 const Tick entryTime;
202
203 /** When will request leave the controller */
204 Tick readyTime;
205
206 /** This comes from the outside world */
207 const PacketPtr pkt;
208
209 const bool isRead;
210
211 /** Will be populated by address decoder */
212 const uint8_t rank;
213 const uint8_t bank;
214 const uint16_t row;
215
216 /**
217 * Bank id is calculated considering banks in all the ranks
218 * eg: 2 ranks each with 8 banks, then bankId = 0 --> rank0, bank0 and
219 * bankId = 8 --> rank1, bank0
220 */
221 const uint16_t bankId;
222
223 /**
224 * The starting address of the DRAM packet.
225 * This address could be unaligned to burst size boundaries. The
226 * reason is to keep the address offset so we can accurately check
227 * incoming read packets with packets in the write queue.
228 */
229 Addr addr;
230
231 /**
232 * The size of this dram packet in bytes
233 * It is always equal or smaller than DRAM burst size
234 */
235 unsigned int size;
236
237 /**
238 * A pointer to the BurstHelper if this DRAMPacket is a split packet
239 * If not a split packet (common case), this is set to NULL
240 */
241 BurstHelper* burstHelper;
242 Bank& bankRef;
243
244 DRAMPacket(PacketPtr _pkt, bool is_read, uint8_t _rank, uint8_t _bank,
245 uint16_t _row, uint16_t bank_id, Addr _addr,
246 unsigned int _size, Bank& bank_ref)
247 : entryTime(curTick()), readyTime(curTick()),
248 pkt(_pkt), isRead(is_read), rank(_rank), bank(_bank), row(_row),
249 bankId(bank_id), addr(_addr), size(_size), burstHelper(NULL),
250 bankRef(bank_ref)
251 { }
252
253 };
254
255 /**
256 * Bunch of things requires to setup "events" in gem5
257 * When event "respondEvent" occurs for example, the method
258 * processRespondEvent is called; no parameters are allowed
259 * in these methods
260 */
261 void processNextReqEvent();
262 EventWrapper<DRAMCtrl,&DRAMCtrl::processNextReqEvent> nextReqEvent;
263
264 void processRespondEvent();
265 EventWrapper<DRAMCtrl, &DRAMCtrl::processRespondEvent> respondEvent;
266
267 void processActivateEvent();
268 EventWrapper<DRAMCtrl, &DRAMCtrl::processActivateEvent> activateEvent;
269
270 void processPrechargeEvent();
271 EventWrapper<DRAMCtrl, &DRAMCtrl::processPrechargeEvent> prechargeEvent;
272
273 void processRefreshEvent();
274 EventWrapper<DRAMCtrl, &DRAMCtrl::processRefreshEvent> refreshEvent;
275
276 void processPowerEvent();
277 EventWrapper<DRAMCtrl,&DRAMCtrl::processPowerEvent> powerEvent;
278
279 /**
280 * Check if the read queue has room for more entries
281 *
282 * @param pktCount The number of entries needed in the read queue
283 * @return true if read queue is full, false otherwise
284 */
285 bool readQueueFull(unsigned int pktCount) const;
286
287 /**
288 * Check if the write queue has room for more entries
289 *
290 * @param pktCount The number of entries needed in the write queue
291 * @return true if write queue is full, false otherwise
292 */
293 bool writeQueueFull(unsigned int pktCount) const;
294
295 /**
296 * When a new read comes in, first check if the write q has a
297 * pending request to the same address.\ If not, decode the
298 * address to populate rank/bank/row, create one or mutliple
299 * "dram_pkt", and push them to the back of the read queue.\
300 * If this is the only
301 * read request in the system, schedule an event to start
302 * servicing it.
303 *
304 * @param pkt The request packet from the outside world
305 * @param pktCount The number of DRAM bursts the pkt
306 * translate to. If pkt size is larger then one full burst,
307 * then pktCount is greater than one.
308 */
309 void addToReadQueue(PacketPtr pkt, unsigned int pktCount);
310
311 /**
312 * Decode the incoming pkt, create a dram_pkt and push to the
313 * back of the write queue. \If the write q length is more than
314 * the threshold specified by the user, ie the queue is beginning
315 * to get full, stop reads, and start draining writes.
316 *
317 * @param pkt The request packet from the outside world
318 * @param pktCount The number of DRAM bursts the pkt
319 * translate to. If pkt size is larger then one full burst,
320 * then pktCount is greater than one.
321 */
322 void addToWriteQueue(PacketPtr pkt, unsigned int pktCount);
323
324 /**
325 * Actually do the DRAM access - figure out the latency it
326 * will take to service the req based on bank state, channel state etc
327 * and then update those states to account for this request.\ Based
328 * on this, update the packet's "readyTime" and move it to the
329 * response q from where it will eventually go back to the outside
330 * world.
331 *
332 * @param pkt The DRAM packet created from the outside world pkt
333 */
334 void doDRAMAccess(DRAMPacket* dram_pkt);
335
336 /**
337 * When a packet reaches its "readyTime" in the response Q,
338 * use the "access()" method in AbstractMemory to actually
339 * create the response packet, and send it back to the outside
340 * world requestor.
341 *
342 * @param pkt The packet from the outside world
343 * @param static_latency Static latency to add before sending the packet
344 */
345 void accessAndRespond(PacketPtr pkt, Tick static_latency);
346
347 /**
348 * Address decoder to figure out physical mapping onto ranks,
349 * banks, and rows. This function is called multiple times on the same
350 * system packet if the pakcet is larger than burst of the memory. The
351 * dramPktAddr is used for the offset within the packet.
352 *
353 * @param pkt The packet from the outside world
354 * @param dramPktAddr The starting address of the DRAM packet
355 * @param size The size of the DRAM packet in bytes
356 * @param isRead Is the request for a read or a write to DRAM
357 * @return A DRAMPacket pointer with the decoded information
358 */
359 DRAMPacket* decodeAddr(PacketPtr pkt, Addr dramPktAddr, unsigned int size,
360 bool isRead);
361
362 /**
363 * The memory schduler/arbiter - picks which request needs to
364 * go next, based on the specified policy such as FCFS or FR-FCFS
365 * and moves it to the head of the queue.
366 */
367 void chooseNext(std::deque<DRAMPacket*>& queue);
368
369 /**
1/*
2 * Copyright (c) 2012-2014 ARM Limited
3 * All rights reserved
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder. You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2013 Amin Farmahini-Farahani
15 * All rights reserved.
16 *
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions are
19 * met: redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer;
21 * redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution;
24 * neither the name of the copyright holders nor the names of its
25 * contributors may be used to endorse or promote products derived from
26 * this software without specific prior written permission.
27 *
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 *
40 * Authors: Andreas Hansson
41 * Ani Udipi
42 * Neha Agarwal
43 */
44
45/**
46 * @file
47 * DRAMCtrl declaration
48 */
49
50#ifndef __MEM_DRAM_CTRL_HH__
51#define __MEM_DRAM_CTRL_HH__
52
53#include <deque>
54
55#include "base/statistics.hh"
56#include "enums/AddrMap.hh"
57#include "enums/MemSched.hh"
58#include "enums/PageManage.hh"
59#include "mem/abstract_mem.hh"
60#include "mem/qport.hh"
61#include "params/DRAMCtrl.hh"
62#include "sim/eventq.hh"
63
64/**
65 * The DRAM controller is a basic single-channel memory controller
66 * aiming to mimic a high-level DRAM controller and the most important
67 * timing constraints associated with the DRAM. The focus is really on
68 * modelling the impact on the system rather than the DRAM itself,
69 * hence the focus is on the controller model and not on the
70 * memory. By adhering to the correct timing constraints, ultimately
71 * there is no need for a memory model in addition to the controller
72 * model.
73 *
74 * As a basic design principle, this controller is not cycle callable,
75 * but instead uses events to decide when new decisions can be made,
76 * when resources become available, when things are to be considered
77 * done, and when to send things back. Through these simple
78 * principles, we achieve a performant model that is not
79 * cycle-accurate, but enables us to evaluate the system impact of a
80 * wide range of memory technologies, and also collect statistics
81 * about the use of the memory.
82 */
83class DRAMCtrl : public AbstractMemory
84{
85
86 private:
87
88 // For now, make use of a queued slave port to avoid dealing with
89 // flow control for the responses being sent back
90 class MemoryPort : public QueuedSlavePort
91 {
92
93 SlavePacketQueue queue;
94 DRAMCtrl& memory;
95
96 public:
97
98 MemoryPort(const std::string& name, DRAMCtrl& _memory);
99
100 protected:
101
102 Tick recvAtomic(PacketPtr pkt);
103
104 void recvFunctional(PacketPtr pkt);
105
106 bool recvTimingReq(PacketPtr);
107
108 virtual AddrRangeList getAddrRanges() const;
109
110 };
111
112 /**
113 * Our incoming port, for a multi-ported controller add a crossbar
114 * in front of it
115 */
116 MemoryPort port;
117
118 /**
119 * Remember if we have to retry a request when available.
120 */
121 bool retryRdReq;
122 bool retryWrReq;
123
124 /**
125 * Bus state used to control the read/write switching and drive
126 * the scheduling of the next request.
127 */
128 enum BusState {
129 READ = 0,
130 READ_TO_WRITE,
131 WRITE,
132 WRITE_TO_READ
133 };
134
135 BusState busState;
136
137 /** List to keep track of activate ticks */
138 std::vector<std::deque<Tick>> actTicks;
139
140 /**
141 * A basic class to track the bank state, i.e. what row is
142 * currently open (if any), when is the bank free to accept a new
143 * column (read/write) command, when can it be precharged, and
144 * when can it be activated.
145 *
146 * The bank also keeps track of how many bytes have been accessed
147 * in the open row since it was opened.
148 */
149 class Bank
150 {
151
152 public:
153
154 static const uint32_t NO_ROW = -1;
155
156 uint32_t openRow;
157
158 Tick colAllowedAt;
159 Tick preAllowedAt;
160 Tick actAllowedAt;
161
162 uint32_t rowAccesses;
163 uint32_t bytesAccessed;
164
165 Bank() :
166 openRow(NO_ROW), colAllowedAt(0), preAllowedAt(0), actAllowedAt(0),
167 rowAccesses(0), bytesAccessed(0)
168 { }
169 };
170
171 /**
172 * A burst helper helps organize and manage a packet that is larger than
173 * the DRAM burst size. A system packet that is larger than the burst size
174 * is split into multiple DRAM packets and all those DRAM packets point to
175 * a single burst helper such that we know when the whole packet is served.
176 */
177 class BurstHelper {
178
179 public:
180
181 /** Number of DRAM bursts requred for a system packet **/
182 const unsigned int burstCount;
183
184 /** Number of DRAM bursts serviced so far for a system packet **/
185 unsigned int burstsServiced;
186
187 BurstHelper(unsigned int _burstCount)
188 : burstCount(_burstCount), burstsServiced(0)
189 { }
190 };
191
192 /**
193 * A DRAM packet stores packets along with the timestamp of when
194 * the packet entered the queue, and also the decoded address.
195 */
196 class DRAMPacket {
197
198 public:
199
200 /** When did request enter the controller */
201 const Tick entryTime;
202
203 /** When will request leave the controller */
204 Tick readyTime;
205
206 /** This comes from the outside world */
207 const PacketPtr pkt;
208
209 const bool isRead;
210
211 /** Will be populated by address decoder */
212 const uint8_t rank;
213 const uint8_t bank;
214 const uint16_t row;
215
216 /**
217 * Bank id is calculated considering banks in all the ranks
218 * eg: 2 ranks each with 8 banks, then bankId = 0 --> rank0, bank0 and
219 * bankId = 8 --> rank1, bank0
220 */
221 const uint16_t bankId;
222
223 /**
224 * The starting address of the DRAM packet.
225 * This address could be unaligned to burst size boundaries. The
226 * reason is to keep the address offset so we can accurately check
227 * incoming read packets with packets in the write queue.
228 */
229 Addr addr;
230
231 /**
232 * The size of this dram packet in bytes
233 * It is always equal or smaller than DRAM burst size
234 */
235 unsigned int size;
236
237 /**
238 * A pointer to the BurstHelper if this DRAMPacket is a split packet
239 * If not a split packet (common case), this is set to NULL
240 */
241 BurstHelper* burstHelper;
242 Bank& bankRef;
243
244 DRAMPacket(PacketPtr _pkt, bool is_read, uint8_t _rank, uint8_t _bank,
245 uint16_t _row, uint16_t bank_id, Addr _addr,
246 unsigned int _size, Bank& bank_ref)
247 : entryTime(curTick()), readyTime(curTick()),
248 pkt(_pkt), isRead(is_read), rank(_rank), bank(_bank), row(_row),
249 bankId(bank_id), addr(_addr), size(_size), burstHelper(NULL),
250 bankRef(bank_ref)
251 { }
252
253 };
254
255 /**
256 * Bunch of things requires to setup "events" in gem5
257 * When event "respondEvent" occurs for example, the method
258 * processRespondEvent is called; no parameters are allowed
259 * in these methods
260 */
261 void processNextReqEvent();
262 EventWrapper<DRAMCtrl,&DRAMCtrl::processNextReqEvent> nextReqEvent;
263
264 void processRespondEvent();
265 EventWrapper<DRAMCtrl, &DRAMCtrl::processRespondEvent> respondEvent;
266
267 void processActivateEvent();
268 EventWrapper<DRAMCtrl, &DRAMCtrl::processActivateEvent> activateEvent;
269
270 void processPrechargeEvent();
271 EventWrapper<DRAMCtrl, &DRAMCtrl::processPrechargeEvent> prechargeEvent;
272
273 void processRefreshEvent();
274 EventWrapper<DRAMCtrl, &DRAMCtrl::processRefreshEvent> refreshEvent;
275
276 void processPowerEvent();
277 EventWrapper<DRAMCtrl,&DRAMCtrl::processPowerEvent> powerEvent;
278
279 /**
280 * Check if the read queue has room for more entries
281 *
282 * @param pktCount The number of entries needed in the read queue
283 * @return true if read queue is full, false otherwise
284 */
285 bool readQueueFull(unsigned int pktCount) const;
286
287 /**
288 * Check if the write queue has room for more entries
289 *
290 * @param pktCount The number of entries needed in the write queue
291 * @return true if write queue is full, false otherwise
292 */
293 bool writeQueueFull(unsigned int pktCount) const;
294
295 /**
296 * When a new read comes in, first check if the write q has a
297 * pending request to the same address.\ If not, decode the
298 * address to populate rank/bank/row, create one or mutliple
299 * "dram_pkt", and push them to the back of the read queue.\
300 * If this is the only
301 * read request in the system, schedule an event to start
302 * servicing it.
303 *
304 * @param pkt The request packet from the outside world
305 * @param pktCount The number of DRAM bursts the pkt
306 * translate to. If pkt size is larger then one full burst,
307 * then pktCount is greater than one.
308 */
309 void addToReadQueue(PacketPtr pkt, unsigned int pktCount);
310
311 /**
312 * Decode the incoming pkt, create a dram_pkt and push to the
313 * back of the write queue. \If the write q length is more than
314 * the threshold specified by the user, ie the queue is beginning
315 * to get full, stop reads, and start draining writes.
316 *
317 * @param pkt The request packet from the outside world
318 * @param pktCount The number of DRAM bursts the pkt
319 * translate to. If pkt size is larger then one full burst,
320 * then pktCount is greater than one.
321 */
322 void addToWriteQueue(PacketPtr pkt, unsigned int pktCount);
323
324 /**
325 * Actually do the DRAM access - figure out the latency it
326 * will take to service the req based on bank state, channel state etc
327 * and then update those states to account for this request.\ Based
328 * on this, update the packet's "readyTime" and move it to the
329 * response q from where it will eventually go back to the outside
330 * world.
331 *
332 * @param pkt The DRAM packet created from the outside world pkt
333 */
334 void doDRAMAccess(DRAMPacket* dram_pkt);
335
336 /**
337 * When a packet reaches its "readyTime" in the response Q,
338 * use the "access()" method in AbstractMemory to actually
339 * create the response packet, and send it back to the outside
340 * world requestor.
341 *
342 * @param pkt The packet from the outside world
343 * @param static_latency Static latency to add before sending the packet
344 */
345 void accessAndRespond(PacketPtr pkt, Tick static_latency);
346
347 /**
348 * Address decoder to figure out physical mapping onto ranks,
349 * banks, and rows. This function is called multiple times on the same
350 * system packet if the pakcet is larger than burst of the memory. The
351 * dramPktAddr is used for the offset within the packet.
352 *
353 * @param pkt The packet from the outside world
354 * @param dramPktAddr The starting address of the DRAM packet
355 * @param size The size of the DRAM packet in bytes
356 * @param isRead Is the request for a read or a write to DRAM
357 * @return A DRAMPacket pointer with the decoded information
358 */
359 DRAMPacket* decodeAddr(PacketPtr pkt, Addr dramPktAddr, unsigned int size,
360 bool isRead);
361
362 /**
363 * The memory schduler/arbiter - picks which request needs to
364 * go next, based on the specified policy such as FCFS or FR-FCFS
365 * and moves it to the head of the queue.
366 */
367 void chooseNext(std::deque<DRAMPacket*>& queue);
368
369 /**
370 * Move the request at the head of the read queue to the response
371 * queue, sorting by readyTime.\ If it is the only packet in the
372 * response queue, schedule a respond event to send it back to the
373 * outside world
374 */
375 void moveToRespQ();
376
377 /**
378 * For FR-FCFS policy reorder the read/write queue depending on row buffer
379 * hits and earliest banks available in DRAM
380 */
381 void reorderQueue(std::deque<DRAMPacket*>& queue);
382
383 /**
384 * Find which are the earliest banks ready to issue an activate
385 * for the enqueued requests. Assumes maximum of 64 banks per DIMM
386 *
387 * @param Queued requests to consider
388 * @return One-hot encoded mask of bank indices
389 */
390 uint64_t minBankActAt(const std::deque<DRAMPacket*>& queue) const;
391
392 /**
393 * Keep track of when row activations happen, in order to enforce
394 * the maximum number of activations in the activation window. The
395 * method updates the time that the banks become available based
396 * on the current limits.
397 *
398 * @param act_tick Time when the activation takes place
399 * @param rank Index of the rank
400 * @param bank Index of the bank
401 * @param row Index of the row
402 * @param bank_ref Reference to the bank
403 */
404 void activateBank(Tick act_tick, uint8_t rank, uint8_t bank,
405 uint16_t row, Bank& bank_ref);
406
407 /**
408 * Precharge a given bank and also update when the precharge is
409 * done. This will also deal with any stats related to the
410 * accesses to the open page.
411 *
412 * @param bank The bank to precharge
413 * @param pre_at Time when the precharge takes place
414 */
415 void prechargeBank(Bank& bank, Tick pre_at);
416
417 /**
418 * Used for debugging to observe the contents of the queues.
419 */
420 void printQs() const;
421
422 /**
423 * The controller's main read and write queues
424 */
425 std::deque<DRAMPacket*> readQueue;
426 std::deque<DRAMPacket*> writeQueue;
427
428 /**
429 * Response queue where read packets wait after we're done working
430 * with them, but it's not time to send the response yet. The
431 * responses are stored seperately mostly to keep the code clean
432 * and help with events scheduling. For all logical purposes such
433 * as sizing the read queue, this and the main read queue need to
434 * be added together.
435 */
436 std::deque<DRAMPacket*> respQueue;
437
438 /**
439 * If we need to drain, keep the drain manager around until we're
440 * done here.
441 */
442 DrainManager *drainManager;
443
444 /**
445 * Multi-dimensional vector of banks, first dimension is ranks,
446 * second is bank
447 */
448 std::vector<std::vector<Bank> > banks;
449
450 /**
451 * The following are basic design parameters of the memory
452 * controller, and are initialized based on parameter values.
453 * The rowsPerBank is determined based on the capacity, number of
454 * ranks and banks, the burst size, and the row buffer size.
455 */
456 const uint32_t deviceBusWidth;
457 const uint32_t burstLength;
458 const uint32_t deviceRowBufferSize;
459 const uint32_t devicesPerRank;
460 const uint32_t burstSize;
461 const uint32_t rowBufferSize;
462 const uint32_t columnsPerRowBuffer;
463 const uint32_t ranksPerChannel;
464 const uint32_t banksPerRank;
465 const uint32_t channels;
466 uint32_t rowsPerBank;
467 const uint32_t readBufferSize;
468 const uint32_t writeBufferSize;
469 const uint32_t writeHighThreshold;
470 const uint32_t writeLowThreshold;
471 const uint32_t minWritesPerSwitch;
472 uint32_t writesThisTime;
473 uint32_t readsThisTime;
474
475 /**
476 * Basic memory timing parameters initialized based on parameter
477 * values.
478 */
479 const Tick tWTR;
480 const Tick tRTW;
481 const Tick tBURST;
482 const Tick tRCD;
483 const Tick tCL;
484 const Tick tRP;
485 const Tick tRAS;
486 const Tick tWR;
487 const Tick tRTP;
488 const Tick tRFC;
489 const Tick tREFI;
490 const Tick tRRD;
491 const Tick tXAW;
492 const uint32_t activationLimit;
493
494 /**
495 * Memory controller configuration initialized based on parameter
496 * values.
497 */
498 Enums::MemSched memSchedPolicy;
499 Enums::AddrMap addrMapping;
500 Enums::PageManage pageMgmt;
501
502 /**
503 * Max column accesses (read and write) per row, before forefully
504 * closing it.
505 */
506 const uint32_t maxAccessesPerRow;
507
508 /**
509 * Pipeline latency of the controller frontend. The frontend
510 * contribution is added to writes (that complete when they are in
511 * the write buffer) and reads that are serviced the write buffer.
512 */
513 const Tick frontendLatency;
514
515 /**
516 * Pipeline latency of the backend and PHY. Along with the
517 * frontend contribution, this latency is added to reads serviced
518 * by the DRAM.
519 */
520 const Tick backendLatency;
521
522 /**
523 * Till when has the main data bus been spoken for already?
524 */
525 Tick busBusyUntil;
526
527 /**
528 * Keep track of when a refresh is due.
529 */
530 Tick refreshDueAt;
531
532 /**
533 * The refresh state is used to control the progress of the
534 * refresh scheduling. When normal operation is in progress the
535 * refresh state is idle. From there, it progresses to the refresh
536 * drain state once tREFI has passed. The refresh drain state
537 * captures the DRAM row active state, as it will stay there until
538 * all ongoing accesses complete. Thereafter all banks are
539 * precharged, and lastly, the DRAM is refreshed.
540 */
541 enum RefreshState {
542 REF_IDLE = 0,
543 REF_DRAIN,
544 REF_PRE,
545 REF_RUN
546 };
547
548 RefreshState refreshState;
549
550 /**
551 * The power state captures the different operational states of
552 * the DRAM and interacts with the bus read/write state machine,
553 * and the refresh state machine. In the idle state all banks are
554 * precharged. From there we either go to an auto refresh (as
555 * determined by the refresh state machine), or to a precharge
556 * power down mode. From idle the memory can also go to the active
557 * state (with one or more banks active), and in turn from there
558 * to active power down. At the moment we do not capture the deep
559 * power down and self-refresh state.
560 */
561 enum PowerState {
562 PWR_IDLE = 0,
563 PWR_REF,
564 PWR_PRE_PDN,
565 PWR_ACT,
566 PWR_ACT_PDN
567 };
568
569 /**
570 * Since we are taking decisions out of order, we need to keep
571 * track of what power transition is happening at what time, such
572 * that we can go back in time and change history. For example, if
573 * we precharge all banks and schedule going to the idle state, we
574 * might at a later point decide to activate a bank before the
575 * transition to idle would have taken place.
576 */
577 PowerState pwrStateTrans;
578
579 /**
580 * Current power state.
581 */
582 PowerState pwrState;
583
584 /**
585 * Schedule a power state transition in the future, and
586 * potentially override an already scheduled transition.
587 *
588 * @param pwr_state Power state to transition to
589 * @param tick Tick when transition should take place
590 */
591 void schedulePowerEvent(PowerState pwr_state, Tick tick);
592
593 Tick prevArrival;
594
595 /**
596 * The soonest you have to start thinking about the next request
597 * is the longest access time that can occur before
598 * busBusyUntil. Assuming you need to precharge, open a new row,
599 * and access, it is tRP + tRCD + tCL.
600 */
601 Tick nextReqTime;
602
603 // All statistics that the model needs to capture
604 Stats::Scalar readReqs;
605 Stats::Scalar writeReqs;
606 Stats::Scalar readBursts;
607 Stats::Scalar writeBursts;
608 Stats::Scalar bytesReadDRAM;
609 Stats::Scalar bytesReadWrQ;
610 Stats::Scalar bytesWritten;
611 Stats::Scalar bytesReadSys;
612 Stats::Scalar bytesWrittenSys;
613 Stats::Scalar servicedByWrQ;
614 Stats::Scalar mergedWrBursts;
615 Stats::Scalar neitherReadNorWrite;
616 Stats::Vector perBankRdBursts;
617 Stats::Vector perBankWrBursts;
618 Stats::Scalar numRdRetry;
619 Stats::Scalar numWrRetry;
620 Stats::Scalar totGap;
621 Stats::Vector readPktSize;
622 Stats::Vector writePktSize;
623 Stats::Vector rdQLenPdf;
624 Stats::Vector wrQLenPdf;
625 Stats::Histogram bytesPerActivate;
626 Stats::Histogram rdPerTurnAround;
627 Stats::Histogram wrPerTurnAround;
628
629 // Latencies summed over all requests
630 Stats::Scalar totQLat;
631 Stats::Scalar totMemAccLat;
632 Stats::Scalar totBusLat;
633
634 // Average latencies per request
635 Stats::Formula avgQLat;
636 Stats::Formula avgBusLat;
637 Stats::Formula avgMemAccLat;
638
639 // Average bandwidth
640 Stats::Formula avgRdBW;
641 Stats::Formula avgWrBW;
642 Stats::Formula avgRdBWSys;
643 Stats::Formula avgWrBWSys;
644 Stats::Formula peakBW;
645 Stats::Formula busUtil;
646 Stats::Formula busUtilRead;
647 Stats::Formula busUtilWrite;
648
649 // Average queue lengths
650 Stats::Average avgRdQLen;
651 Stats::Average avgWrQLen;
652
653 // Row hit count and rate
654 Stats::Scalar readRowHits;
655 Stats::Scalar writeRowHits;
656 Stats::Formula readRowHitRate;
657 Stats::Formula writeRowHitRate;
658 Stats::Formula avgGap;
659
660 // DRAM Power Calculation
661 Stats::Formula pageHitRate;
662 Stats::Vector pwrStateTime;
663
664 // Track when we transitioned to the current power state
665 Tick pwrStateTick;
666
667 // To track number of banks which are currently active
668 unsigned int numBanksActive;
669
670 /** @todo this is a temporary workaround until the 4-phase code is
671 * committed. upstream caches needs this packet until true is returned, so
672 * hold onto it for deletion until a subsequent call
673 */
674 std::vector<PacketPtr> pendingDelete;
675
676 public:
677
678 void regStats();
679
680 DRAMCtrl(const DRAMCtrlParams* p);
681
682 unsigned int drain(DrainManager* dm);
683
684 virtual BaseSlavePort& getSlavePort(const std::string& if_name,
685 PortID idx = InvalidPortID);
686
687 virtual void init();
688 virtual void startup();
689
690 protected:
691
692 Tick recvAtomic(PacketPtr pkt);
693 void recvFunctional(PacketPtr pkt);
694 bool recvTimingReq(PacketPtr pkt);
695
696};
697
698#endif //__MEM_DRAM_CTRL_HH__
370 * For FR-FCFS policy reorder the read/write queue depending on row buffer
371 * hits and earliest banks available in DRAM
372 */
373 void reorderQueue(std::deque<DRAMPacket*>& queue);
374
375 /**
376 * Find which are the earliest banks ready to issue an activate
377 * for the enqueued requests. Assumes maximum of 64 banks per DIMM
378 *
379 * @param Queued requests to consider
380 * @return One-hot encoded mask of bank indices
381 */
382 uint64_t minBankActAt(const std::deque<DRAMPacket*>& queue) const;
383
384 /**
385 * Keep track of when row activations happen, in order to enforce
386 * the maximum number of activations in the activation window. The
387 * method updates the time that the banks become available based
388 * on the current limits.
389 *
390 * @param act_tick Time when the activation takes place
391 * @param rank Index of the rank
392 * @param bank Index of the bank
393 * @param row Index of the row
394 * @param bank_ref Reference to the bank
395 */
396 void activateBank(Tick act_tick, uint8_t rank, uint8_t bank,
397 uint16_t row, Bank& bank_ref);
398
399 /**
400 * Precharge a given bank and also update when the precharge is
401 * done. This will also deal with any stats related to the
402 * accesses to the open page.
403 *
404 * @param bank The bank to precharge
405 * @param pre_at Time when the precharge takes place
406 */
407 void prechargeBank(Bank& bank, Tick pre_at);
408
409 /**
410 * Used for debugging to observe the contents of the queues.
411 */
412 void printQs() const;
413
414 /**
415 * The controller's main read and write queues
416 */
417 std::deque<DRAMPacket*> readQueue;
418 std::deque<DRAMPacket*> writeQueue;
419
420 /**
421 * Response queue where read packets wait after we're done working
422 * with them, but it's not time to send the response yet. The
423 * responses are stored seperately mostly to keep the code clean
424 * and help with events scheduling. For all logical purposes such
425 * as sizing the read queue, this and the main read queue need to
426 * be added together.
427 */
428 std::deque<DRAMPacket*> respQueue;
429
430 /**
431 * If we need to drain, keep the drain manager around until we're
432 * done here.
433 */
434 DrainManager *drainManager;
435
436 /**
437 * Multi-dimensional vector of banks, first dimension is ranks,
438 * second is bank
439 */
440 std::vector<std::vector<Bank> > banks;
441
442 /**
443 * The following are basic design parameters of the memory
444 * controller, and are initialized based on parameter values.
445 * The rowsPerBank is determined based on the capacity, number of
446 * ranks and banks, the burst size, and the row buffer size.
447 */
448 const uint32_t deviceBusWidth;
449 const uint32_t burstLength;
450 const uint32_t deviceRowBufferSize;
451 const uint32_t devicesPerRank;
452 const uint32_t burstSize;
453 const uint32_t rowBufferSize;
454 const uint32_t columnsPerRowBuffer;
455 const uint32_t ranksPerChannel;
456 const uint32_t banksPerRank;
457 const uint32_t channels;
458 uint32_t rowsPerBank;
459 const uint32_t readBufferSize;
460 const uint32_t writeBufferSize;
461 const uint32_t writeHighThreshold;
462 const uint32_t writeLowThreshold;
463 const uint32_t minWritesPerSwitch;
464 uint32_t writesThisTime;
465 uint32_t readsThisTime;
466
467 /**
468 * Basic memory timing parameters initialized based on parameter
469 * values.
470 */
471 const Tick tWTR;
472 const Tick tRTW;
473 const Tick tBURST;
474 const Tick tRCD;
475 const Tick tCL;
476 const Tick tRP;
477 const Tick tRAS;
478 const Tick tWR;
479 const Tick tRTP;
480 const Tick tRFC;
481 const Tick tREFI;
482 const Tick tRRD;
483 const Tick tXAW;
484 const uint32_t activationLimit;
485
486 /**
487 * Memory controller configuration initialized based on parameter
488 * values.
489 */
490 Enums::MemSched memSchedPolicy;
491 Enums::AddrMap addrMapping;
492 Enums::PageManage pageMgmt;
493
494 /**
495 * Max column accesses (read and write) per row, before forefully
496 * closing it.
497 */
498 const uint32_t maxAccessesPerRow;
499
500 /**
501 * Pipeline latency of the controller frontend. The frontend
502 * contribution is added to writes (that complete when they are in
503 * the write buffer) and reads that are serviced the write buffer.
504 */
505 const Tick frontendLatency;
506
507 /**
508 * Pipeline latency of the backend and PHY. Along with the
509 * frontend contribution, this latency is added to reads serviced
510 * by the DRAM.
511 */
512 const Tick backendLatency;
513
514 /**
515 * Till when has the main data bus been spoken for already?
516 */
517 Tick busBusyUntil;
518
519 /**
520 * Keep track of when a refresh is due.
521 */
522 Tick refreshDueAt;
523
524 /**
525 * The refresh state is used to control the progress of the
526 * refresh scheduling. When normal operation is in progress the
527 * refresh state is idle. From there, it progresses to the refresh
528 * drain state once tREFI has passed. The refresh drain state
529 * captures the DRAM row active state, as it will stay there until
530 * all ongoing accesses complete. Thereafter all banks are
531 * precharged, and lastly, the DRAM is refreshed.
532 */
533 enum RefreshState {
534 REF_IDLE = 0,
535 REF_DRAIN,
536 REF_PRE,
537 REF_RUN
538 };
539
540 RefreshState refreshState;
541
542 /**
543 * The power state captures the different operational states of
544 * the DRAM and interacts with the bus read/write state machine,
545 * and the refresh state machine. In the idle state all banks are
546 * precharged. From there we either go to an auto refresh (as
547 * determined by the refresh state machine), or to a precharge
548 * power down mode. From idle the memory can also go to the active
549 * state (with one or more banks active), and in turn from there
550 * to active power down. At the moment we do not capture the deep
551 * power down and self-refresh state.
552 */
553 enum PowerState {
554 PWR_IDLE = 0,
555 PWR_REF,
556 PWR_PRE_PDN,
557 PWR_ACT,
558 PWR_ACT_PDN
559 };
560
561 /**
562 * Since we are taking decisions out of order, we need to keep
563 * track of what power transition is happening at what time, such
564 * that we can go back in time and change history. For example, if
565 * we precharge all banks and schedule going to the idle state, we
566 * might at a later point decide to activate a bank before the
567 * transition to idle would have taken place.
568 */
569 PowerState pwrStateTrans;
570
571 /**
572 * Current power state.
573 */
574 PowerState pwrState;
575
576 /**
577 * Schedule a power state transition in the future, and
578 * potentially override an already scheduled transition.
579 *
580 * @param pwr_state Power state to transition to
581 * @param tick Tick when transition should take place
582 */
583 void schedulePowerEvent(PowerState pwr_state, Tick tick);
584
585 Tick prevArrival;
586
587 /**
588 * The soonest you have to start thinking about the next request
589 * is the longest access time that can occur before
590 * busBusyUntil. Assuming you need to precharge, open a new row,
591 * and access, it is tRP + tRCD + tCL.
592 */
593 Tick nextReqTime;
594
595 // All statistics that the model needs to capture
596 Stats::Scalar readReqs;
597 Stats::Scalar writeReqs;
598 Stats::Scalar readBursts;
599 Stats::Scalar writeBursts;
600 Stats::Scalar bytesReadDRAM;
601 Stats::Scalar bytesReadWrQ;
602 Stats::Scalar bytesWritten;
603 Stats::Scalar bytesReadSys;
604 Stats::Scalar bytesWrittenSys;
605 Stats::Scalar servicedByWrQ;
606 Stats::Scalar mergedWrBursts;
607 Stats::Scalar neitherReadNorWrite;
608 Stats::Vector perBankRdBursts;
609 Stats::Vector perBankWrBursts;
610 Stats::Scalar numRdRetry;
611 Stats::Scalar numWrRetry;
612 Stats::Scalar totGap;
613 Stats::Vector readPktSize;
614 Stats::Vector writePktSize;
615 Stats::Vector rdQLenPdf;
616 Stats::Vector wrQLenPdf;
617 Stats::Histogram bytesPerActivate;
618 Stats::Histogram rdPerTurnAround;
619 Stats::Histogram wrPerTurnAround;
620
621 // Latencies summed over all requests
622 Stats::Scalar totQLat;
623 Stats::Scalar totMemAccLat;
624 Stats::Scalar totBusLat;
625
626 // Average latencies per request
627 Stats::Formula avgQLat;
628 Stats::Formula avgBusLat;
629 Stats::Formula avgMemAccLat;
630
631 // Average bandwidth
632 Stats::Formula avgRdBW;
633 Stats::Formula avgWrBW;
634 Stats::Formula avgRdBWSys;
635 Stats::Formula avgWrBWSys;
636 Stats::Formula peakBW;
637 Stats::Formula busUtil;
638 Stats::Formula busUtilRead;
639 Stats::Formula busUtilWrite;
640
641 // Average queue lengths
642 Stats::Average avgRdQLen;
643 Stats::Average avgWrQLen;
644
645 // Row hit count and rate
646 Stats::Scalar readRowHits;
647 Stats::Scalar writeRowHits;
648 Stats::Formula readRowHitRate;
649 Stats::Formula writeRowHitRate;
650 Stats::Formula avgGap;
651
652 // DRAM Power Calculation
653 Stats::Formula pageHitRate;
654 Stats::Vector pwrStateTime;
655
656 // Track when we transitioned to the current power state
657 Tick pwrStateTick;
658
659 // To track number of banks which are currently active
660 unsigned int numBanksActive;
661
662 /** @todo this is a temporary workaround until the 4-phase code is
663 * committed. upstream caches needs this packet until true is returned, so
664 * hold onto it for deletion until a subsequent call
665 */
666 std::vector<PacketPtr> pendingDelete;
667
668 public:
669
670 void regStats();
671
672 DRAMCtrl(const DRAMCtrlParams* p);
673
674 unsigned int drain(DrainManager* dm);
675
676 virtual BaseSlavePort& getSlavePort(const std::string& if_name,
677 PortID idx = InvalidPortID);
678
679 virtual void init();
680 virtual void startup();
681
682 protected:
683
684 Tick recvAtomic(PacketPtr pkt);
685 void recvFunctional(PacketPtr pkt);
686 bool recvTimingReq(PacketPtr pkt);
687
688};
689
690#endif //__MEM_DRAM_CTRL_HH__