1/*
2 * Copyright (c) 2010-2015 ARM Limited
3 * All rights reserved
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder. You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2005 The Regents of The University of Michigan
15 * All rights reserved.
16 *
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions are
19 * met: redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer;
21 * redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution;
24 * neither the name of the copyright holders nor the names of its
25 * contributors may be used to endorse or promote products derived from
26 * this software without specific prior written permission.
27 *
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 *
40 * Authors: Ali Saidi
41 * Andreas Sandberg
42 */
43
44
45/** @file
46 * Implementiation of a PL011 UART
47 */
48
49#ifndef __DEV_ARM_PL011_H__
50#define __DEV_ARM_PL011_H__
51
52#include "dev/arm/amba_device.hh"
53#include "dev/uart.hh"
54
55class BaseGic;
56struct Pl011Params;
57
58class Pl011 : public Uart, public AmbaDevice
59{
60 public:
61 Pl011(const Pl011Params *p);
62
| 1/*
2 * Copyright (c) 2010-2015 ARM Limited
3 * All rights reserved
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder. You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2005 The Regents of The University of Michigan
15 * All rights reserved.
16 *
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions are
19 * met: redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer;
21 * redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution;
24 * neither the name of the copyright holders nor the names of its
25 * contributors may be used to endorse or promote products derived from
26 * this software without specific prior written permission.
27 *
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 *
40 * Authors: Ali Saidi
41 * Andreas Sandberg
42 */
43
44
45/** @file
46 * Implementiation of a PL011 UART
47 */
48
49#ifndef __DEV_ARM_PL011_H__
50#define __DEV_ARM_PL011_H__
51
52#include "dev/arm/amba_device.hh"
53#include "dev/uart.hh"
54
55class BaseGic;
56struct Pl011Params;
57
58class Pl011 : public Uart, public AmbaDevice
59{
60 public:
61 Pl011(const Pl011Params *p);
62
|
72
73
74 protected: // Interrupt handling
75 /** Function to generate interrupt */
76 void generateInterrupt();
77
78 /**
79 * Assign new interrupt values and update interrupt signals
80 *
81 * A new interrupt is scheduled signalled if the set of unmasked
82 * interrupts goes empty to non-empty. Conversely, if the set of
83 * unmasked interrupts goes from non-empty to empty, the interrupt
84 * signal is cleared.
85 *
86 * @param ints New <i>raw</i> interrupt status
87 * @param mask New interrupt mask
88 */
89 void setInterrupts(uint16_t ints, uint16_t mask);
90 /**
91 * Convenience function to update the interrupt mask
92 *
93 * @see setInterrupts
94 * @param mask New interrupt mask
95 */
96 void setInterruptMask(uint16_t mask) { setInterrupts(rawInt, mask); }
97 /**
98 * Convenience function to raise a new interrupt
99 *
100 * @see setInterrupts
101 * @param ints Set of interrupts to raise
102 */
103 void raiseInterrupts(uint16_t ints) { setInterrupts(rawInt | ints, imsc); }
104 /**
105 * Convenience function to clear interrupts
106 *
107 * @see setInterrupts
108 * @param ints Set of interrupts to clear
109 */
110 void clearInterrupts(uint16_t ints) { setInterrupts(rawInt & ~ints, imsc); }
111
112 /** Masked interrupt status register */
113 const inline uint16_t maskInt() const { return rawInt & imsc; }
114
115 /** Wrapper to create an event out of the thing */
116 EventWrapper<Pl011, &Pl011::generateInterrupt> intEvent;
117
118 protected: // Registers
119 static const uint64_t AMBA_ID = ULL(0xb105f00d00341011);
120 static const int UART_DR = 0x000;
121 static const int UART_FR = 0x018;
122 static const int UART_FR_CTS = 0x001;
123 static const int UART_FR_TXFE = 0x080;
124 static const int UART_FR_RXFE = 0x010;
125 static const int UART_IBRD = 0x024;
126 static const int UART_FBRD = 0x028;
127 static const int UART_LCRH = 0x02C;
128 static const int UART_CR = 0x030;
129 static const int UART_IFLS = 0x034;
130 static const int UART_IMSC = 0x038;
131 static const int UART_RIS = 0x03C;
132 static const int UART_MIS = 0x040;
133 static const int UART_ICR = 0x044;
134
135 static const uint16_t UART_RIINTR = 1 << 0;
136 static const uint16_t UART_CTSINTR = 1 << 1;
137 static const uint16_t UART_CDCINTR = 1 << 2;
138 static const uint16_t UART_DSRINTR = 1 << 3;
139 static const uint16_t UART_RXINTR = 1 << 4;
140 static const uint16_t UART_TXINTR = 1 << 5;
141 static const uint16_t UART_RTINTR = 1 << 6;
142 static const uint16_t UART_FEINTR = 1 << 7;
143 static const uint16_t UART_PEINTR = 1 << 8;
144 static const uint16_t UART_BEINTR = 1 << 9;
145 static const uint16_t UART_OEINTR = 1 << 10;
146
147 uint16_t control;
148
149 /** fractional baud rate divisor. Not used for anything but reporting
150 * written value */
151 uint16_t fbrd;
152
153 /** integer baud rate divisor. Not used for anything but reporting
154 * written value */
155 uint16_t ibrd;
156
157 /** Line control register. Not used for anything but reporting
158 * written value */
159 uint16_t lcrh;
160
161 /** interrupt fifo level register. Not used for anything but reporting
162 * written value */
163 uint16_t ifls;
164
165 /** interrupt mask register. */
166 uint16_t imsc;
167
168 /** raw interrupt status register */
169 uint16_t rawInt;
170
171 protected: // Configuration
172 /** Gic to use for interrupting */
173 BaseGic * const gic;
174
175 /** Should the simulation end on an EOT */
176 const bool endOnEOT;
177
178 /** Interrupt number to generate */
179 const int intNum;
180
181 /** Delay before interrupting */
182 const Tick intDelay;
183};
184
185#endif //__DEV_ARM_PL011_H__
| 72
73
74 protected: // Interrupt handling
75 /** Function to generate interrupt */
76 void generateInterrupt();
77
78 /**
79 * Assign new interrupt values and update interrupt signals
80 *
81 * A new interrupt is scheduled signalled if the set of unmasked
82 * interrupts goes empty to non-empty. Conversely, if the set of
83 * unmasked interrupts goes from non-empty to empty, the interrupt
84 * signal is cleared.
85 *
86 * @param ints New <i>raw</i> interrupt status
87 * @param mask New interrupt mask
88 */
89 void setInterrupts(uint16_t ints, uint16_t mask);
90 /**
91 * Convenience function to update the interrupt mask
92 *
93 * @see setInterrupts
94 * @param mask New interrupt mask
95 */
96 void setInterruptMask(uint16_t mask) { setInterrupts(rawInt, mask); }
97 /**
98 * Convenience function to raise a new interrupt
99 *
100 * @see setInterrupts
101 * @param ints Set of interrupts to raise
102 */
103 void raiseInterrupts(uint16_t ints) { setInterrupts(rawInt | ints, imsc); }
104 /**
105 * Convenience function to clear interrupts
106 *
107 * @see setInterrupts
108 * @param ints Set of interrupts to clear
109 */
110 void clearInterrupts(uint16_t ints) { setInterrupts(rawInt & ~ints, imsc); }
111
112 /** Masked interrupt status register */
113 const inline uint16_t maskInt() const { return rawInt & imsc; }
114
115 /** Wrapper to create an event out of the thing */
116 EventWrapper<Pl011, &Pl011::generateInterrupt> intEvent;
117
118 protected: // Registers
119 static const uint64_t AMBA_ID = ULL(0xb105f00d00341011);
120 static const int UART_DR = 0x000;
121 static const int UART_FR = 0x018;
122 static const int UART_FR_CTS = 0x001;
123 static const int UART_FR_TXFE = 0x080;
124 static const int UART_FR_RXFE = 0x010;
125 static const int UART_IBRD = 0x024;
126 static const int UART_FBRD = 0x028;
127 static const int UART_LCRH = 0x02C;
128 static const int UART_CR = 0x030;
129 static const int UART_IFLS = 0x034;
130 static const int UART_IMSC = 0x038;
131 static const int UART_RIS = 0x03C;
132 static const int UART_MIS = 0x040;
133 static const int UART_ICR = 0x044;
134
135 static const uint16_t UART_RIINTR = 1 << 0;
136 static const uint16_t UART_CTSINTR = 1 << 1;
137 static const uint16_t UART_CDCINTR = 1 << 2;
138 static const uint16_t UART_DSRINTR = 1 << 3;
139 static const uint16_t UART_RXINTR = 1 << 4;
140 static const uint16_t UART_TXINTR = 1 << 5;
141 static const uint16_t UART_RTINTR = 1 << 6;
142 static const uint16_t UART_FEINTR = 1 << 7;
143 static const uint16_t UART_PEINTR = 1 << 8;
144 static const uint16_t UART_BEINTR = 1 << 9;
145 static const uint16_t UART_OEINTR = 1 << 10;
146
147 uint16_t control;
148
149 /** fractional baud rate divisor. Not used for anything but reporting
150 * written value */
151 uint16_t fbrd;
152
153 /** integer baud rate divisor. Not used for anything but reporting
154 * written value */
155 uint16_t ibrd;
156
157 /** Line control register. Not used for anything but reporting
158 * written value */
159 uint16_t lcrh;
160
161 /** interrupt fifo level register. Not used for anything but reporting
162 * written value */
163 uint16_t ifls;
164
165 /** interrupt mask register. */
166 uint16_t imsc;
167
168 /** raw interrupt status register */
169 uint16_t rawInt;
170
171 protected: // Configuration
172 /** Gic to use for interrupting */
173 BaseGic * const gic;
174
175 /** Should the simulation end on an EOT */
176 const bool endOnEOT;
177
178 /** Interrupt number to generate */
179 const int intNum;
180
181 /** Delay before interrupting */
182 const Tick intDelay;
183};
184
185#endif //__DEV_ARM_PL011_H__
|