1# Copyright (c) 2009-2018 ARM Limited
2# All rights reserved.
3#
4# The license below extends only to copyright in the software and shall
5# not be construed as granting a license to any other intellectual
6# property including but not limited to intellectual property relating
7# to a hardware implementation of the functionality of the software
8# licensed hereunder. You may use the software subject to the license
9# terms below provided that you ensure that this notice is replicated
10# unmodified and in its entirety in all distributions of the software,
11# modified or unmodified, in source code or in binary form.
12#
13# Copyright (c) 2006-2007 The Regents of The University of Michigan
14# All rights reserved.
15#
16# Redistribution and use in source and binary forms, with or without
17# modification, are permitted provided that the following conditions are
18# met: redistributions of source code must retain the above copyright
19# notice, this list of conditions and the following disclaimer;
20# redistributions in binary form must reproduce the above copyright
21# notice, this list of conditions and the following disclaimer in the
22# documentation and/or other materials provided with the distribution;
23# neither the name of the copyright holders nor the names of its
24# contributors may be used to endorse or promote products derived from
25# this software without specific prior written permission.
26#
27# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
30# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
32# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
33# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
34# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
35# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
37# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38#
39# Authors: Ali Saidi
40# Gabe Black
41# William Wang
42# Glenn Bergmans
43
44from m5.defines import buildEnv
45from m5.params import *
46from m5.proxy import *
47from m5.util.fdthelper import *
48from ClockDomain import ClockDomain
49from VoltageDomain import VoltageDomain
50from Device import BasicPioDevice, PioDevice, IsaFake, BadAddr, DmaDevice
51from PciHost import *
52from Ethernet import NSGigE, IGbE_igb, IGbE_e1000
53from Ide import *
54from Platform import Platform
55from Terminal import Terminal
56from Uart import Uart
57from SimpleMemory import SimpleMemory
58from Gic import *
59from EnergyCtrl import EnergyCtrl
60from ClockedObject import ClockedObject
61from ClockDomain import SrcClockDomain
62from SubSystem import SubSystem
63from Graphics import ImageFormat
64from ClockedObject import ClockedObject
65from PS2 import *
66from VirtIOMMIO import MmioVirtIO
67
68# Platforms with KVM support should generally use in-kernel GIC
69# emulation. Use a GIC model that automatically switches between
70# gem5's GIC model and KVM's GIC model if KVM is available.
71try:
72 from KvmGic import MuxingKvmGic
73 kvm_gicv2_class = MuxingKvmGic
74except ImportError:
75 # KVM support wasn't compiled into gem5. Fallback to a
76 # software-only GIC.
77 kvm_gicv2_class = Gic400
78 pass
79
80class AmbaPioDevice(BasicPioDevice):
81 type = 'AmbaPioDevice'
82 abstract = True
83 cxx_header = "dev/arm/amba_device.hh"
84 amba_id = Param.UInt32("ID of AMBA device for kernel detection")
85
86class AmbaIntDevice(AmbaPioDevice):
87 type = 'AmbaIntDevice'
88 abstract = True
89 cxx_header = "dev/arm/amba_device.hh"
90 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting")
91 int_num = Param.UInt32("Interrupt number that connects to GIC")
92 int_delay = Param.Latency("100ns",
93 "Time between action and interrupt generation by device")
94
95class AmbaDmaDevice(DmaDevice):
96 type = 'AmbaDmaDevice'
97 abstract = True
98 cxx_header = "dev/arm/amba_device.hh"
99 pio_addr = Param.Addr("Address for AMBA slave interface")
100 pio_latency = Param.Latency("10ns", "Time between action and write/read result by AMBA DMA Device")
101 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting")
102 int_num = Param.UInt32("Interrupt number that connects to GIC")
103 amba_id = Param.UInt32("ID of AMBA device for kernel detection")
104
105class A9SCU(BasicPioDevice):
106 type = 'A9SCU'
107 cxx_header = "dev/arm/a9scu.hh"
108
109class ArmPciIntRouting(Enum): vals = [
110 'ARM_PCI_INT_STATIC',
111 'ARM_PCI_INT_DEV',
112 'ARM_PCI_INT_PIN',
113 ]
114
115class GenericArmPciHost(GenericPciHost):
116 type = 'GenericArmPciHost'
117 cxx_header = "dev/arm/pci_host.hh"
118
119 int_policy = Param.ArmPciIntRouting("PCI interrupt routing policy")
120 int_base = Param.Unsigned("PCI interrupt base")
121 int_count = Param.Unsigned("Maximum number of interrupts used by this host")
122
123 def generateDeviceTree(self, state):
124 local_state = FdtState(addr_cells=3, size_cells=2, cpu_cells=1)
125 intterrupt_cells = 1
126
127 node = FdtNode("pci")
128
129 if int(self.conf_device_bits) == 8:
130 node.appendCompatible("pci-host-cam-generic")
131 elif int(self.conf_device_bits) == 12:
132 node.appendCompatible("pci-host-ecam-generic")
133 else:
134 m5.fatal("No compatibility string for the set conf_device_width")
135
136 node.append(FdtPropertyStrings("device_type", ["pci"]))
137
138 # Cell sizes of child nodes/peripherals
139 node.append(local_state.addrCellsProperty())
140 node.append(local_state.sizeCellsProperty())
141 node.append(FdtPropertyWords("#interrupt-cells", intterrupt_cells))
142 # PCI address for CPU
143 node.append(FdtPropertyWords("reg",
144 state.addrCells(self.conf_base) +
145 state.sizeCells(self.conf_size) ))
146
147 # Ranges mapping
148 # For now some of this is hard coded, because the PCI module does not
149 # have a proper full understanding of the memory map, but adapting the
150 # PCI module is beyond the scope of what I'm trying to do here.
151 # Values are taken from the VExpress_GEM5_V1 platform.
152 ranges = []
153 # Pio address range
154 ranges += self.pciFdtAddr(space=1, addr=0)
155 ranges += state.addrCells(self.pci_pio_base)
156 ranges += local_state.sizeCells(0x10000) # Fixed size
157
158 # AXI memory address range
159 ranges += self.pciFdtAddr(space=2, addr=0)
160 ranges += state.addrCells(0x40000000) # Fixed offset
161 ranges += local_state.sizeCells(0x40000000) # Fixed size
162 node.append(FdtPropertyWords("ranges", ranges))
163
164 if str(self.int_policy) == 'ARM_PCI_INT_DEV':
165 int_phandle = state.phandle(self._parent.unproxy(self).gic)
166 # Interrupt mapping
167 interrupts = []
168 for i in range(int(self.int_count)):
169 interrupts += self.pciFdtAddr(device=i, addr=0) + \
170 [0x0, int_phandle, 0, int(self.int_base) - 32 + i, 1]
171
172 node.append(FdtPropertyWords("interrupt-map", interrupts))
173
174 int_count = int(self.int_count)
175 if int_count & (int_count - 1):
176 fatal("PCI interrupt count should be power of 2")
177
178 intmask = self.pciFdtAddr(device=int_count - 1, addr=0) + [0x0]
179 node.append(FdtPropertyWords("interrupt-map-mask", intmask))
180 else:
181 m5.fatal("Unsupported PCI interrupt policy " +
182 "for Device Tree generation")
183
184 node.append(FdtProperty("dma-coherent"))
185
186 yield node
187
188class RealViewCtrl(BasicPioDevice):
189 type = 'RealViewCtrl'
190 cxx_header = "dev/arm/rv_ctrl.hh"
191 proc_id0 = Param.UInt32(0x0C000000, "Processor ID, SYS_PROCID")
192 proc_id1 = Param.UInt32(0x0C000222, "Processor ID, SYS_PROCID1")
193 idreg = Param.UInt32(0x00000000, "ID Register, SYS_ID")
194
195 def generateDeviceTree(self, state):
196 node = FdtNode("sysreg@%x" % long(self.pio_addr))
197 node.appendCompatible("arm,vexpress-sysreg")
198 node.append(FdtPropertyWords("reg",
199 state.addrCells(self.pio_addr) +
200 state.sizeCells(0x1000) ))
201 node.append(FdtProperty("gpio-controller"))
202 node.append(FdtPropertyWords("#gpio-cells", [2]))
203 node.appendPhandle(self)
204
205 yield node
206
207class RealViewOsc(ClockDomain):
208 type = 'RealViewOsc'
209 cxx_header = "dev/arm/rv_ctrl.hh"
210
211 parent = Param.RealViewCtrl(Parent.any, "RealView controller")
212
213 # TODO: We currently don't have the notion of a clock source,
214 # which means we have to associate oscillators with a voltage
215 # source.
216 voltage_domain = Param.VoltageDomain(Parent.voltage_domain,
217 "Voltage domain")
218
219 # See ARM DUI 0447J (ARM Motherboard Express uATX -- V2M-P1) and
220 # the individual core/logic tile reference manuals for details
221 # about the site/position/dcc/device allocation.
222 site = Param.UInt8("Board Site")
223 position = Param.UInt8("Position in device stack")
224 dcc = Param.UInt8("Daughterboard Configuration Controller")
225 device = Param.UInt8("Device ID")
226
227 freq = Param.Clock("Default frequency")
228
229 def generateDeviceTree(self, state):
230 phandle = state.phandle(self)
231 node = FdtNode("osc@" + format(long(phandle), 'x'))
232 node.appendCompatible("arm,vexpress-osc")
233 node.append(FdtPropertyWords("arm,vexpress-sysreg,func",
234 [0x1, int(self.device)]))
235 node.append(FdtPropertyWords("#clock-cells", [0]))
236 freq = int(1.0/self.freq.value) # Values are stored as a clock period
237 node.append(FdtPropertyWords("freq-range", [freq, freq]))
238 node.append(FdtPropertyStrings("clock-output-names",
239 ["oscclk" + str(phandle)]))
240 node.appendPhandle(self)
241 yield node
242
243class RealViewTemperatureSensor(SimObject):
244 type = 'RealViewTemperatureSensor'
245 cxx_header = "dev/arm/rv_ctrl.hh"
246
247 parent = Param.RealViewCtrl(Parent.any, "RealView controller")
248
249 system = Param.System(Parent.any, "system")
250
251 # See ARM DUI 0447J (ARM Motherboard Express uATX -- V2M-P1) and
252 # the individual core/logic tile reference manuals for details
253 # about the site/position/dcc/device allocation.
254 site = Param.UInt8("Board Site")
255 position = Param.UInt8("Position in device stack")
256 dcc = Param.UInt8("Daughterboard Configuration Controller")
257 device = Param.UInt8("Device ID")
258
259class VExpressMCC(SubSystem):
260 """ARM V2M-P1 Motherboard Configuration Controller
261
262This subsystem describes a subset of the devices that sit behind the
263motherboard configuration controller on the the ARM Motherboard
264Express (V2M-P1) motherboard. See ARM DUI 0447J for details.
265 """
266
267 class Osc(RealViewOsc):
268 site, position, dcc = (0, 0, 0)
269
270 class Temperature(RealViewTemperatureSensor):
271 site, position, dcc = (0, 0, 0)
272
273 osc_mcc = Osc(device=0, freq="50MHz")
274 osc_clcd = Osc(device=1, freq="23.75MHz")
275 osc_peripheral = Osc(device=2, freq="24MHz")
276 osc_system_bus = Osc(device=4, freq="24MHz")
277
278 # See Table 4.19 in ARM DUI 0447J (Motherboard Express uATX TRM).
279 temp_crtl = Temperature(device=0)
280
281 def generateDeviceTree(self, state):
282 node = FdtNode("mcc")
283 node.appendCompatible("arm,vexpress,config-bus")
284 node.append(FdtPropertyWords("arm,vexpress,site", [0]))
285
286 for obj in self._children.values():
287 if issubclass(type(obj), SimObject):
288 node.append(obj.generateDeviceTree(state))
289
290 io_phandle = state.phandle(self.osc_mcc.parent.unproxy(self))
291 node.append(FdtPropertyWords("arm,vexpress,config-bridge", io_phandle))
292
293 yield node
294
295class CoreTile2A15DCC(SubSystem):
296 """ARM CoreTile Express A15x2 Daughterboard Configuration Controller
297
298This subsystem describes a subset of the devices that sit behind the
299daughterboard configuration controller on a CoreTile Express A15x2. See
300ARM DUI 0604E for details.
301 """
302
303 class Osc(RealViewOsc):
304 site, position, dcc = (1, 0, 0)
305
306 # See Table 2.8 in ARM DUI 0604E (CoreTile Express A15x2 TRM)
307 osc_cpu = Osc(device=0, freq="60MHz")
308 osc_hsbm = Osc(device=4, freq="40MHz")
309 osc_pxl = Osc(device=5, freq="23.75MHz")
310 osc_smb = Osc(device=6, freq="50MHz")
311 osc_sys = Osc(device=7, freq="60MHz")
312 osc_ddr = Osc(device=8, freq="40MHz")
313
314 def generateDeviceTree(self, state):
315 node = FdtNode("dcc")
316 node.appendCompatible("arm,vexpress,config-bus")
317
318 for obj in self._children.values():
319 if isinstance(obj, SimObject):
320 node.append(obj.generateDeviceTree(state))
321
322 io_phandle = state.phandle(self.osc_cpu.parent.unproxy(self))
323 node.append(FdtPropertyWords("arm,vexpress,config-bridge", io_phandle))
324
325 yield node
326
327class AmbaFake(AmbaPioDevice):
328 type = 'AmbaFake'
329 cxx_header = "dev/arm/amba_fake.hh"
330 ignore_access = Param.Bool(False, "Ignore reads/writes to this device, (e.g. IsaFake + AMBA)")
331 amba_id = 0;
332
333class Pl011(Uart):
334 type = 'Pl011'
335 cxx_header = "dev/arm/pl011.hh"
336 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting")
337 int_num = Param.UInt32("Interrupt number that connects to GIC")
338 end_on_eot = Param.Bool(False, "End the simulation when a EOT is received on the UART")
339 int_delay = Param.Latency("100ns", "Time between action and interrupt generation by UART")
340
341 def generateDeviceTree(self, state):
342 node = self.generateBasicPioDeviceNode(state, 'uart', self.pio_addr,
343 0x1000, [int(self.int_num)])
344 node.appendCompatible(["arm,pl011", "arm,primecell"])
345
346 # Hardcoded reference to the realview platform clocks, because the
347 # clk_domain can only store one clock (i.e. it is not a VectorParam)
348 realview = self._parent.unproxy(self)
349 node.append(FdtPropertyWords("clocks",
350 [state.phandle(realview.mcc.osc_peripheral),
351 state.phandle(realview.dcc.osc_smb)]))
352 node.append(FdtPropertyStrings("clock-names", ["uartclk", "apb_pclk"]))
353 yield node
354
355class Sp804(AmbaPioDevice):
356 type = 'Sp804'
357 cxx_header = "dev/arm/timer_sp804.hh"
358 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting")
359 int_num0 = Param.UInt32("Interrupt number that connects to GIC")
360 clock0 = Param.Clock('1MHz', "Clock speed of the input")
361 int_num1 = Param.UInt32("Interrupt number that connects to GIC")
362 clock1 = Param.Clock('1MHz', "Clock speed of the input")
363 amba_id = 0x00141804
364
365class A9GlobalTimer(BasicPioDevice):
366 type = 'A9GlobalTimer'
367 cxx_header = "dev/arm/timer_a9global.hh"
368 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting")
369 int_num = Param.UInt32("Interrrupt number that connects to GIC")
370
371class CpuLocalTimer(BasicPioDevice):
372 type = 'CpuLocalTimer'
373 cxx_header = "dev/arm/timer_cpulocal.hh"
374 int_timer = Param.ArmPPI("Interrrupt used per-cpu to GIC")
375 int_watchdog = Param.ArmPPI("Interrupt for per-cpu watchdog to GIC")
376
377class GenericTimer(ClockedObject):
378 type = 'GenericTimer'
379 cxx_header = "dev/arm/generic_timer.hh"
380 system = Param.ArmSystem(Parent.any, "system")
381 int_phys_s = Param.ArmPPI("Physical (S) timer interrupt")
382 int_phys_ns = Param.ArmPPI("Physical (NS) timer interrupt")
383 int_virt = Param.ArmPPI("Virtual timer interrupt")
384 int_hyp = Param.ArmPPI("Hypervisor timer interrupt")
385
386 def generateDeviceTree(self, state):
387 node = FdtNode("timer")
388
389 node.appendCompatible(["arm,cortex-a15-timer",
390 "arm,armv7-timer",
391 "arm,armv8-timer"])
392 node.append(FdtPropertyWords("interrupts", [
393 1, int(self.int_phys_s.num) - 16, 0xf08,
394 1, int(self.int_phys_ns.num) - 16, 0xf08,
395 1, int(self.int_virt.num) - 16, 0xf08,
396 1, int(self.int_hyp.num) - 16, 0xf08,
397 ]))
398 clock = state.phandle(self.clk_domain.unproxy(self))
399 node.append(FdtPropertyWords("clocks", clock))
400
401 yield node
402
403class GenericTimerMem(PioDevice):
404 type = 'GenericTimerMem'
405 cxx_header = "dev/arm/generic_timer.hh"
406
407 base = Param.Addr(0, "Base address")
408
409 int_phys = Param.ArmSPI("Physical Interrupt")
410 int_virt = Param.ArmSPI("Virtual Interrupt")
411
412class PL031(AmbaIntDevice):
413 type = 'PL031'
414 cxx_header = "dev/arm/rtc_pl031.hh"
415 time = Param.Time('01/01/2009', "System time to use ('Now' for actual time)")
416 amba_id = 0x00341031
417
418 def generateDeviceTree(self, state):
419 node = self.generateBasicPioDeviceNode(state, 'rtc', self.pio_addr,
420 0x1000, [int(self.int_num)])
421
422 node.appendCompatible(["arm,pl031", "arm,primecell"])
423 clock = state.phandle(self.clk_domain.unproxy(self))
424 node.append(FdtPropertyWords("clocks", clock))
425
426 yield node
427
428class Pl050(AmbaIntDevice):
429 type = 'Pl050'
430 cxx_header = "dev/arm/kmi.hh"
431 amba_id = 0x00141050
432
433 ps2 = Param.PS2Device("PS/2 device")
434
435 def generateDeviceTree(self, state):
436 node = self.generateBasicPioDeviceNode(state, 'kmi', self.pio_addr,
437 0x1000, [int(self.int_num)])
438
439 node.appendCompatible(["arm,pl050", "arm,primecell"])
440 clock = state.phandle(self.clk_domain.unproxy(self))
441 node.append(FdtPropertyWords("clocks", clock))
442
443 yield node
444
445class Pl111(AmbaDmaDevice):
446 type = 'Pl111'
447 cxx_header = "dev/arm/pl111.hh"
448 pixel_clock = Param.Clock('24MHz', "Pixel clock")
449 vnc = Param.VncInput(Parent.any, "Vnc server for remote frame buffer display")
450 amba_id = 0x00141111
451 enable_capture = Param.Bool(True, "capture frame to system.framebuffer.bmp")
452
453class HDLcd(AmbaDmaDevice):
454 type = 'HDLcd'
455 cxx_header = "dev/arm/hdlcd.hh"
456 vnc = Param.VncInput(Parent.any, "Vnc server for remote frame buffer "
457 "display")
458 amba_id = 0x00141000
459 workaround_swap_rb = Param.Bool(False, "Workaround incorrect color "
460 "selector order in some kernels")
461 workaround_dma_line_count = Param.Bool(True, "Workaround incorrect "
462 "DMA line count (off by 1)")
463 enable_capture = Param.Bool(True, "capture frame to "
464 "system.framebuffer.{extension}")
465 frame_format = Param.ImageFormat("Auto",
466 "image format of the captured frame")
467
468 pixel_buffer_size = Param.MemorySize32("2kB", "Size of address range")
469
470 pxl_clk = Param.ClockDomain("Pixel clock source")
471 pixel_chunk = Param.Unsigned(32, "Number of pixels to handle in one batch")
472 virt_refresh_rate = Param.Frequency("20Hz", "Frame refresh rate "
473 "in KVM mode")
474
475 def generateDeviceTree(self, state):
476 # Interrupt number is hardcoded; it is not a property of this class
477 node = self.generateBasicPioDeviceNode(state, 'hdlcd',
478 self.pio_addr, 0x1000, [63])
479
480 node.appendCompatible(["arm,hdlcd"])
481 node.append(FdtPropertyWords("clocks", state.phandle(self.pxl_clk)))
482 node.append(FdtPropertyStrings("clock-names", ["pxlclk"]))
483
484 # This driver is disabled by default since the required DT nodes
485 # haven't been standardized yet. To use it, override this status to
486 # "ok" and add the display configuration nodes required by the driver.
487 # See the driver for more information.
488 node.append(FdtPropertyStrings("status", ["disabled"]))
489
490 yield node
491
492class RealView(Platform):
493 type = 'RealView'
494 cxx_header = "dev/arm/realview.hh"
495 system = Param.System(Parent.any, "system")
| 1# Copyright (c) 2009-2018 ARM Limited
2# All rights reserved.
3#
4# The license below extends only to copyright in the software and shall
5# not be construed as granting a license to any other intellectual
6# property including but not limited to intellectual property relating
7# to a hardware implementation of the functionality of the software
8# licensed hereunder. You may use the software subject to the license
9# terms below provided that you ensure that this notice is replicated
10# unmodified and in its entirety in all distributions of the software,
11# modified or unmodified, in source code or in binary form.
12#
13# Copyright (c) 2006-2007 The Regents of The University of Michigan
14# All rights reserved.
15#
16# Redistribution and use in source and binary forms, with or without
17# modification, are permitted provided that the following conditions are
18# met: redistributions of source code must retain the above copyright
19# notice, this list of conditions and the following disclaimer;
20# redistributions in binary form must reproduce the above copyright
21# notice, this list of conditions and the following disclaimer in the
22# documentation and/or other materials provided with the distribution;
23# neither the name of the copyright holders nor the names of its
24# contributors may be used to endorse or promote products derived from
25# this software without specific prior written permission.
26#
27# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
30# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
32# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
33# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
34# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
35# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
37# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38#
39# Authors: Ali Saidi
40# Gabe Black
41# William Wang
42# Glenn Bergmans
43
44from m5.defines import buildEnv
45from m5.params import *
46from m5.proxy import *
47from m5.util.fdthelper import *
48from ClockDomain import ClockDomain
49from VoltageDomain import VoltageDomain
50from Device import BasicPioDevice, PioDevice, IsaFake, BadAddr, DmaDevice
51from PciHost import *
52from Ethernet import NSGigE, IGbE_igb, IGbE_e1000
53from Ide import *
54from Platform import Platform
55from Terminal import Terminal
56from Uart import Uart
57from SimpleMemory import SimpleMemory
58from Gic import *
59from EnergyCtrl import EnergyCtrl
60from ClockedObject import ClockedObject
61from ClockDomain import SrcClockDomain
62from SubSystem import SubSystem
63from Graphics import ImageFormat
64from ClockedObject import ClockedObject
65from PS2 import *
66from VirtIOMMIO import MmioVirtIO
67
68# Platforms with KVM support should generally use in-kernel GIC
69# emulation. Use a GIC model that automatically switches between
70# gem5's GIC model and KVM's GIC model if KVM is available.
71try:
72 from KvmGic import MuxingKvmGic
73 kvm_gicv2_class = MuxingKvmGic
74except ImportError:
75 # KVM support wasn't compiled into gem5. Fallback to a
76 # software-only GIC.
77 kvm_gicv2_class = Gic400
78 pass
79
80class AmbaPioDevice(BasicPioDevice):
81 type = 'AmbaPioDevice'
82 abstract = True
83 cxx_header = "dev/arm/amba_device.hh"
84 amba_id = Param.UInt32("ID of AMBA device for kernel detection")
85
86class AmbaIntDevice(AmbaPioDevice):
87 type = 'AmbaIntDevice'
88 abstract = True
89 cxx_header = "dev/arm/amba_device.hh"
90 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting")
91 int_num = Param.UInt32("Interrupt number that connects to GIC")
92 int_delay = Param.Latency("100ns",
93 "Time between action and interrupt generation by device")
94
95class AmbaDmaDevice(DmaDevice):
96 type = 'AmbaDmaDevice'
97 abstract = True
98 cxx_header = "dev/arm/amba_device.hh"
99 pio_addr = Param.Addr("Address for AMBA slave interface")
100 pio_latency = Param.Latency("10ns", "Time between action and write/read result by AMBA DMA Device")
101 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting")
102 int_num = Param.UInt32("Interrupt number that connects to GIC")
103 amba_id = Param.UInt32("ID of AMBA device for kernel detection")
104
105class A9SCU(BasicPioDevice):
106 type = 'A9SCU'
107 cxx_header = "dev/arm/a9scu.hh"
108
109class ArmPciIntRouting(Enum): vals = [
110 'ARM_PCI_INT_STATIC',
111 'ARM_PCI_INT_DEV',
112 'ARM_PCI_INT_PIN',
113 ]
114
115class GenericArmPciHost(GenericPciHost):
116 type = 'GenericArmPciHost'
117 cxx_header = "dev/arm/pci_host.hh"
118
119 int_policy = Param.ArmPciIntRouting("PCI interrupt routing policy")
120 int_base = Param.Unsigned("PCI interrupt base")
121 int_count = Param.Unsigned("Maximum number of interrupts used by this host")
122
123 def generateDeviceTree(self, state):
124 local_state = FdtState(addr_cells=3, size_cells=2, cpu_cells=1)
125 intterrupt_cells = 1
126
127 node = FdtNode("pci")
128
129 if int(self.conf_device_bits) == 8:
130 node.appendCompatible("pci-host-cam-generic")
131 elif int(self.conf_device_bits) == 12:
132 node.appendCompatible("pci-host-ecam-generic")
133 else:
134 m5.fatal("No compatibility string for the set conf_device_width")
135
136 node.append(FdtPropertyStrings("device_type", ["pci"]))
137
138 # Cell sizes of child nodes/peripherals
139 node.append(local_state.addrCellsProperty())
140 node.append(local_state.sizeCellsProperty())
141 node.append(FdtPropertyWords("#interrupt-cells", intterrupt_cells))
142 # PCI address for CPU
143 node.append(FdtPropertyWords("reg",
144 state.addrCells(self.conf_base) +
145 state.sizeCells(self.conf_size) ))
146
147 # Ranges mapping
148 # For now some of this is hard coded, because the PCI module does not
149 # have a proper full understanding of the memory map, but adapting the
150 # PCI module is beyond the scope of what I'm trying to do here.
151 # Values are taken from the VExpress_GEM5_V1 platform.
152 ranges = []
153 # Pio address range
154 ranges += self.pciFdtAddr(space=1, addr=0)
155 ranges += state.addrCells(self.pci_pio_base)
156 ranges += local_state.sizeCells(0x10000) # Fixed size
157
158 # AXI memory address range
159 ranges += self.pciFdtAddr(space=2, addr=0)
160 ranges += state.addrCells(0x40000000) # Fixed offset
161 ranges += local_state.sizeCells(0x40000000) # Fixed size
162 node.append(FdtPropertyWords("ranges", ranges))
163
164 if str(self.int_policy) == 'ARM_PCI_INT_DEV':
165 int_phandle = state.phandle(self._parent.unproxy(self).gic)
166 # Interrupt mapping
167 interrupts = []
168 for i in range(int(self.int_count)):
169 interrupts += self.pciFdtAddr(device=i, addr=0) + \
170 [0x0, int_phandle, 0, int(self.int_base) - 32 + i, 1]
171
172 node.append(FdtPropertyWords("interrupt-map", interrupts))
173
174 int_count = int(self.int_count)
175 if int_count & (int_count - 1):
176 fatal("PCI interrupt count should be power of 2")
177
178 intmask = self.pciFdtAddr(device=int_count - 1, addr=0) + [0x0]
179 node.append(FdtPropertyWords("interrupt-map-mask", intmask))
180 else:
181 m5.fatal("Unsupported PCI interrupt policy " +
182 "for Device Tree generation")
183
184 node.append(FdtProperty("dma-coherent"))
185
186 yield node
187
188class RealViewCtrl(BasicPioDevice):
189 type = 'RealViewCtrl'
190 cxx_header = "dev/arm/rv_ctrl.hh"
191 proc_id0 = Param.UInt32(0x0C000000, "Processor ID, SYS_PROCID")
192 proc_id1 = Param.UInt32(0x0C000222, "Processor ID, SYS_PROCID1")
193 idreg = Param.UInt32(0x00000000, "ID Register, SYS_ID")
194
195 def generateDeviceTree(self, state):
196 node = FdtNode("sysreg@%x" % long(self.pio_addr))
197 node.appendCompatible("arm,vexpress-sysreg")
198 node.append(FdtPropertyWords("reg",
199 state.addrCells(self.pio_addr) +
200 state.sizeCells(0x1000) ))
201 node.append(FdtProperty("gpio-controller"))
202 node.append(FdtPropertyWords("#gpio-cells", [2]))
203 node.appendPhandle(self)
204
205 yield node
206
207class RealViewOsc(ClockDomain):
208 type = 'RealViewOsc'
209 cxx_header = "dev/arm/rv_ctrl.hh"
210
211 parent = Param.RealViewCtrl(Parent.any, "RealView controller")
212
213 # TODO: We currently don't have the notion of a clock source,
214 # which means we have to associate oscillators with a voltage
215 # source.
216 voltage_domain = Param.VoltageDomain(Parent.voltage_domain,
217 "Voltage domain")
218
219 # See ARM DUI 0447J (ARM Motherboard Express uATX -- V2M-P1) and
220 # the individual core/logic tile reference manuals for details
221 # about the site/position/dcc/device allocation.
222 site = Param.UInt8("Board Site")
223 position = Param.UInt8("Position in device stack")
224 dcc = Param.UInt8("Daughterboard Configuration Controller")
225 device = Param.UInt8("Device ID")
226
227 freq = Param.Clock("Default frequency")
228
229 def generateDeviceTree(self, state):
230 phandle = state.phandle(self)
231 node = FdtNode("osc@" + format(long(phandle), 'x'))
232 node.appendCompatible("arm,vexpress-osc")
233 node.append(FdtPropertyWords("arm,vexpress-sysreg,func",
234 [0x1, int(self.device)]))
235 node.append(FdtPropertyWords("#clock-cells", [0]))
236 freq = int(1.0/self.freq.value) # Values are stored as a clock period
237 node.append(FdtPropertyWords("freq-range", [freq, freq]))
238 node.append(FdtPropertyStrings("clock-output-names",
239 ["oscclk" + str(phandle)]))
240 node.appendPhandle(self)
241 yield node
242
243class RealViewTemperatureSensor(SimObject):
244 type = 'RealViewTemperatureSensor'
245 cxx_header = "dev/arm/rv_ctrl.hh"
246
247 parent = Param.RealViewCtrl(Parent.any, "RealView controller")
248
249 system = Param.System(Parent.any, "system")
250
251 # See ARM DUI 0447J (ARM Motherboard Express uATX -- V2M-P1) and
252 # the individual core/logic tile reference manuals for details
253 # about the site/position/dcc/device allocation.
254 site = Param.UInt8("Board Site")
255 position = Param.UInt8("Position in device stack")
256 dcc = Param.UInt8("Daughterboard Configuration Controller")
257 device = Param.UInt8("Device ID")
258
259class VExpressMCC(SubSystem):
260 """ARM V2M-P1 Motherboard Configuration Controller
261
262This subsystem describes a subset of the devices that sit behind the
263motherboard configuration controller on the the ARM Motherboard
264Express (V2M-P1) motherboard. See ARM DUI 0447J for details.
265 """
266
267 class Osc(RealViewOsc):
268 site, position, dcc = (0, 0, 0)
269
270 class Temperature(RealViewTemperatureSensor):
271 site, position, dcc = (0, 0, 0)
272
273 osc_mcc = Osc(device=0, freq="50MHz")
274 osc_clcd = Osc(device=1, freq="23.75MHz")
275 osc_peripheral = Osc(device=2, freq="24MHz")
276 osc_system_bus = Osc(device=4, freq="24MHz")
277
278 # See Table 4.19 in ARM DUI 0447J (Motherboard Express uATX TRM).
279 temp_crtl = Temperature(device=0)
280
281 def generateDeviceTree(self, state):
282 node = FdtNode("mcc")
283 node.appendCompatible("arm,vexpress,config-bus")
284 node.append(FdtPropertyWords("arm,vexpress,site", [0]))
285
286 for obj in self._children.values():
287 if issubclass(type(obj), SimObject):
288 node.append(obj.generateDeviceTree(state))
289
290 io_phandle = state.phandle(self.osc_mcc.parent.unproxy(self))
291 node.append(FdtPropertyWords("arm,vexpress,config-bridge", io_phandle))
292
293 yield node
294
295class CoreTile2A15DCC(SubSystem):
296 """ARM CoreTile Express A15x2 Daughterboard Configuration Controller
297
298This subsystem describes a subset of the devices that sit behind the
299daughterboard configuration controller on a CoreTile Express A15x2. See
300ARM DUI 0604E for details.
301 """
302
303 class Osc(RealViewOsc):
304 site, position, dcc = (1, 0, 0)
305
306 # See Table 2.8 in ARM DUI 0604E (CoreTile Express A15x2 TRM)
307 osc_cpu = Osc(device=0, freq="60MHz")
308 osc_hsbm = Osc(device=4, freq="40MHz")
309 osc_pxl = Osc(device=5, freq="23.75MHz")
310 osc_smb = Osc(device=6, freq="50MHz")
311 osc_sys = Osc(device=7, freq="60MHz")
312 osc_ddr = Osc(device=8, freq="40MHz")
313
314 def generateDeviceTree(self, state):
315 node = FdtNode("dcc")
316 node.appendCompatible("arm,vexpress,config-bus")
317
318 for obj in self._children.values():
319 if isinstance(obj, SimObject):
320 node.append(obj.generateDeviceTree(state))
321
322 io_phandle = state.phandle(self.osc_cpu.parent.unproxy(self))
323 node.append(FdtPropertyWords("arm,vexpress,config-bridge", io_phandle))
324
325 yield node
326
327class AmbaFake(AmbaPioDevice):
328 type = 'AmbaFake'
329 cxx_header = "dev/arm/amba_fake.hh"
330 ignore_access = Param.Bool(False, "Ignore reads/writes to this device, (e.g. IsaFake + AMBA)")
331 amba_id = 0;
332
333class Pl011(Uart):
334 type = 'Pl011'
335 cxx_header = "dev/arm/pl011.hh"
336 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting")
337 int_num = Param.UInt32("Interrupt number that connects to GIC")
338 end_on_eot = Param.Bool(False, "End the simulation when a EOT is received on the UART")
339 int_delay = Param.Latency("100ns", "Time between action and interrupt generation by UART")
340
341 def generateDeviceTree(self, state):
342 node = self.generateBasicPioDeviceNode(state, 'uart', self.pio_addr,
343 0x1000, [int(self.int_num)])
344 node.appendCompatible(["arm,pl011", "arm,primecell"])
345
346 # Hardcoded reference to the realview platform clocks, because the
347 # clk_domain can only store one clock (i.e. it is not a VectorParam)
348 realview = self._parent.unproxy(self)
349 node.append(FdtPropertyWords("clocks",
350 [state.phandle(realview.mcc.osc_peripheral),
351 state.phandle(realview.dcc.osc_smb)]))
352 node.append(FdtPropertyStrings("clock-names", ["uartclk", "apb_pclk"]))
353 yield node
354
355class Sp804(AmbaPioDevice):
356 type = 'Sp804'
357 cxx_header = "dev/arm/timer_sp804.hh"
358 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting")
359 int_num0 = Param.UInt32("Interrupt number that connects to GIC")
360 clock0 = Param.Clock('1MHz', "Clock speed of the input")
361 int_num1 = Param.UInt32("Interrupt number that connects to GIC")
362 clock1 = Param.Clock('1MHz', "Clock speed of the input")
363 amba_id = 0x00141804
364
365class A9GlobalTimer(BasicPioDevice):
366 type = 'A9GlobalTimer'
367 cxx_header = "dev/arm/timer_a9global.hh"
368 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting")
369 int_num = Param.UInt32("Interrrupt number that connects to GIC")
370
371class CpuLocalTimer(BasicPioDevice):
372 type = 'CpuLocalTimer'
373 cxx_header = "dev/arm/timer_cpulocal.hh"
374 int_timer = Param.ArmPPI("Interrrupt used per-cpu to GIC")
375 int_watchdog = Param.ArmPPI("Interrupt for per-cpu watchdog to GIC")
376
377class GenericTimer(ClockedObject):
378 type = 'GenericTimer'
379 cxx_header = "dev/arm/generic_timer.hh"
380 system = Param.ArmSystem(Parent.any, "system")
381 int_phys_s = Param.ArmPPI("Physical (S) timer interrupt")
382 int_phys_ns = Param.ArmPPI("Physical (NS) timer interrupt")
383 int_virt = Param.ArmPPI("Virtual timer interrupt")
384 int_hyp = Param.ArmPPI("Hypervisor timer interrupt")
385
386 def generateDeviceTree(self, state):
387 node = FdtNode("timer")
388
389 node.appendCompatible(["arm,cortex-a15-timer",
390 "arm,armv7-timer",
391 "arm,armv8-timer"])
392 node.append(FdtPropertyWords("interrupts", [
393 1, int(self.int_phys_s.num) - 16, 0xf08,
394 1, int(self.int_phys_ns.num) - 16, 0xf08,
395 1, int(self.int_virt.num) - 16, 0xf08,
396 1, int(self.int_hyp.num) - 16, 0xf08,
397 ]))
398 clock = state.phandle(self.clk_domain.unproxy(self))
399 node.append(FdtPropertyWords("clocks", clock))
400
401 yield node
402
403class GenericTimerMem(PioDevice):
404 type = 'GenericTimerMem'
405 cxx_header = "dev/arm/generic_timer.hh"
406
407 base = Param.Addr(0, "Base address")
408
409 int_phys = Param.ArmSPI("Physical Interrupt")
410 int_virt = Param.ArmSPI("Virtual Interrupt")
411
412class PL031(AmbaIntDevice):
413 type = 'PL031'
414 cxx_header = "dev/arm/rtc_pl031.hh"
415 time = Param.Time('01/01/2009', "System time to use ('Now' for actual time)")
416 amba_id = 0x00341031
417
418 def generateDeviceTree(self, state):
419 node = self.generateBasicPioDeviceNode(state, 'rtc', self.pio_addr,
420 0x1000, [int(self.int_num)])
421
422 node.appendCompatible(["arm,pl031", "arm,primecell"])
423 clock = state.phandle(self.clk_domain.unproxy(self))
424 node.append(FdtPropertyWords("clocks", clock))
425
426 yield node
427
428class Pl050(AmbaIntDevice):
429 type = 'Pl050'
430 cxx_header = "dev/arm/kmi.hh"
431 amba_id = 0x00141050
432
433 ps2 = Param.PS2Device("PS/2 device")
434
435 def generateDeviceTree(self, state):
436 node = self.generateBasicPioDeviceNode(state, 'kmi', self.pio_addr,
437 0x1000, [int(self.int_num)])
438
439 node.appendCompatible(["arm,pl050", "arm,primecell"])
440 clock = state.phandle(self.clk_domain.unproxy(self))
441 node.append(FdtPropertyWords("clocks", clock))
442
443 yield node
444
445class Pl111(AmbaDmaDevice):
446 type = 'Pl111'
447 cxx_header = "dev/arm/pl111.hh"
448 pixel_clock = Param.Clock('24MHz', "Pixel clock")
449 vnc = Param.VncInput(Parent.any, "Vnc server for remote frame buffer display")
450 amba_id = 0x00141111
451 enable_capture = Param.Bool(True, "capture frame to system.framebuffer.bmp")
452
453class HDLcd(AmbaDmaDevice):
454 type = 'HDLcd'
455 cxx_header = "dev/arm/hdlcd.hh"
456 vnc = Param.VncInput(Parent.any, "Vnc server for remote frame buffer "
457 "display")
458 amba_id = 0x00141000
459 workaround_swap_rb = Param.Bool(False, "Workaround incorrect color "
460 "selector order in some kernels")
461 workaround_dma_line_count = Param.Bool(True, "Workaround incorrect "
462 "DMA line count (off by 1)")
463 enable_capture = Param.Bool(True, "capture frame to "
464 "system.framebuffer.{extension}")
465 frame_format = Param.ImageFormat("Auto",
466 "image format of the captured frame")
467
468 pixel_buffer_size = Param.MemorySize32("2kB", "Size of address range")
469
470 pxl_clk = Param.ClockDomain("Pixel clock source")
471 pixel_chunk = Param.Unsigned(32, "Number of pixels to handle in one batch")
472 virt_refresh_rate = Param.Frequency("20Hz", "Frame refresh rate "
473 "in KVM mode")
474
475 def generateDeviceTree(self, state):
476 # Interrupt number is hardcoded; it is not a property of this class
477 node = self.generateBasicPioDeviceNode(state, 'hdlcd',
478 self.pio_addr, 0x1000, [63])
479
480 node.appendCompatible(["arm,hdlcd"])
481 node.append(FdtPropertyWords("clocks", state.phandle(self.pxl_clk)))
482 node.append(FdtPropertyStrings("clock-names", ["pxlclk"]))
483
484 # This driver is disabled by default since the required DT nodes
485 # haven't been standardized yet. To use it, override this status to
486 # "ok" and add the display configuration nodes required by the driver.
487 # See the driver for more information.
488 node.append(FdtPropertyStrings("status", ["disabled"]))
489
490 yield node
491
492class RealView(Platform):
493 type = 'RealView'
494 cxx_header = "dev/arm/realview.hh"
495 system = Param.System(Parent.any, "system")
|
496 _mem_regions = [(Addr(0), Addr('256MB'))]
| 496 _mem_regions = [ AddrRange(0, size='256MB') ]
|
497
498 def _on_chip_devices(self):
499 return []
500
501 def _off_chip_devices(self):
502 return []
503
504 _off_chip_ranges = []
505
506 def _attach_device(self, device, bus, dma_ports=None):
507 if hasattr(device, "pio"):
508 device.pio = bus.master
509 if hasattr(device, "dma"):
510 if dma_ports is None:
511 device.dma = bus.slave
512 else:
513 dma_ports.append(device.dma)
514
515 def _attach_io(self, devices, *args, **kwargs):
516 for d in devices:
517 self._attach_device(d, *args, **kwargs)
518
519 def _attach_clk(self, devices, clkdomain):
520 for d in devices:
521 if hasattr(d, "clk_domain"):
522 d.clk_domain = clkdomain
523
524 def attachPciDevices(self):
525 pass
526
527 def enableMSIX(self):
528 pass
529
530 def onChipIOClkDomain(self, clkdomain):
531 self._attach_clk(self._on_chip_devices(), clkdomain)
532
533 def offChipIOClkDomain(self, clkdomain):
534 self._attach_clk(self._off_chip_devices(), clkdomain)
535
536 def attachOnChipIO(self, bus, bridge=None, *args, **kwargs):
537 self._attach_io(self._on_chip_devices(), bus, *args, **kwargs)
538 if bridge:
539 bridge.ranges = self._off_chip_ranges
540
541 def attachIO(self, *args, **kwargs):
542 self._attach_io(self._off_chip_devices(), *args, **kwargs)
543
544 def setupBootLoader(self, mem_bus, cur_sys, loc):
545 cur_sys.bootmem = SimpleMemory(
546 range = AddrRange('2GB', size = '64MB'),
547 conf_table_reported = False)
548 if mem_bus is not None:
549 cur_sys.bootmem.port = mem_bus.master
550 cur_sys.boot_loader = loc('boot.arm')
551 cur_sys.atags_addr = 0x100
552 cur_sys.load_offset = 0
553
554 def generateDeviceTree(self, state):
555 node = FdtNode("/") # Things in this module need to end up in the root
556 node.append(FdtPropertyWords("interrupt-parent",
557 state.phandle(self.gic)))
558
559 for subnode in self.recurseDeviceTree(state):
560 node.append(subnode)
561
562 yield node
563
564 def annotateCpuDeviceNode(self, cpu, state):
565 cpu.append(FdtPropertyStrings("enable-method", "spin-table"))
566 cpu.append(FdtPropertyWords("cpu-release-addr", \
567 state.addrCells(0x8000fff8)))
568
569# Reference for memory map and interrupt number
570# RealView Platform Baseboard Explore for Cortex-A9 User Guide(ARM DUI 0440A)
571# Chapter 4: Programmer's Reference
572class RealViewPBX(RealView):
573 uart = Pl011(pio_addr=0x10009000, int_num=44)
574 realview_io = RealViewCtrl(pio_addr=0x10000000)
575 mcc = VExpressMCC()
576 dcc = CoreTile2A15DCC()
577 gic = Gic400(cpu_addr=0x1f000100, dist_addr=0x1f001000, cpu_size=0x100)
578 pci_host = GenericPciHost(
579 conf_base=0x30000000, conf_size='256MB', conf_device_bits=16,
580 pci_pio_base=0)
581 timer0 = Sp804(int_num0=36, int_num1=36, pio_addr=0x10011000)
582 timer1 = Sp804(int_num0=37, int_num1=37, pio_addr=0x10012000)
583 global_timer = A9GlobalTimer(int_num=27, pio_addr=0x1f000200)
584 local_cpu_timer = CpuLocalTimer(int_timer=ArmPPI(num=29),
585 int_watchdog=ArmPPI(num=30),
586 pio_addr=0x1f000600)
587 clcd = Pl111(pio_addr=0x10020000, int_num=55)
588 kmi0 = Pl050(pio_addr=0x10006000, int_num=52, ps2=PS2Keyboard())
589 kmi1 = Pl050(pio_addr=0x10007000, int_num=53, ps2=PS2TouchKit())
590 a9scu = A9SCU(pio_addr=0x1f000000)
591 cf_ctrl = IdeController(disks=[], pci_func=0, pci_dev=7, pci_bus=2,
592 io_shift = 1, ctrl_offset = 2, Command = 0x1,
593 BAR0 = 0x18000000, BAR0Size = '16B',
594 BAR1 = 0x18000100, BAR1Size = '1B',
595 BAR0LegacyIO = True, BAR1LegacyIO = True)
596
597
598 l2x0_fake = IsaFake(pio_addr=0x1f002000, pio_size=0xfff)
599 flash_fake = IsaFake(pio_addr=0x40000000, pio_size=0x20000000,
600 fake_mem=True)
601 dmac_fake = AmbaFake(pio_addr=0x10030000)
602 uart1_fake = AmbaFake(pio_addr=0x1000a000)
603 uart2_fake = AmbaFake(pio_addr=0x1000b000)
604 uart3_fake = AmbaFake(pio_addr=0x1000c000)
605 smc_fake = AmbaFake(pio_addr=0x100e1000)
606 sp810_fake = AmbaFake(pio_addr=0x10001000, ignore_access=True)
607 watchdog_fake = AmbaFake(pio_addr=0x10010000)
608 gpio0_fake = AmbaFake(pio_addr=0x10013000)
609 gpio1_fake = AmbaFake(pio_addr=0x10014000)
610 gpio2_fake = AmbaFake(pio_addr=0x10015000)
611 ssp_fake = AmbaFake(pio_addr=0x1000d000)
612 sci_fake = AmbaFake(pio_addr=0x1000e000)
613 aaci_fake = AmbaFake(pio_addr=0x10004000)
614 mmc_fake = AmbaFake(pio_addr=0x10005000)
615 rtc = PL031(pio_addr=0x10017000, int_num=42)
616 energy_ctrl = EnergyCtrl(pio_addr=0x1000f000)
617
618
619 # Attach I/O devices that are on chip and also set the appropriate
620 # ranges for the bridge
621 def attachOnChipIO(self, bus, bridge):
622 self.gic.pio = bus.master
623 self.l2x0_fake.pio = bus.master
624 self.a9scu.pio = bus.master
625 self.global_timer.pio = bus.master
626 self.local_cpu_timer.pio = bus.master
627 # Bridge ranges based on excluding what is part of on-chip I/O
628 # (gic, l2x0, a9scu, local_cpu_timer)
629 bridge.ranges = [AddrRange(self.realview_io.pio_addr,
630 self.a9scu.pio_addr - 1),
631 AddrRange(self.flash_fake.pio_addr,
632 self.flash_fake.pio_addr + \
633 self.flash_fake.pio_size - 1)]
634
635 # Set the clock domain for IO objects that are considered
636 # to be "close" to the cores.
637 def onChipIOClkDomain(self, clkdomain):
638 self.gic.clk_domain = clkdomain
639 self.l2x0_fake.clk_domain = clkdomain
640 self.a9scu.clkdomain = clkdomain
641 self.local_cpu_timer.clk_domain = clkdomain
642
643 # Attach I/O devices to specified bus object. Can't do this
644 # earlier, since the bus object itself is typically defined at the
645 # System level.
646 def attachIO(self, bus):
647 self.uart.pio = bus.master
648 self.realview_io.pio = bus.master
649 self.pci_host.pio = bus.master
650 self.timer0.pio = bus.master
651 self.timer1.pio = bus.master
652 self.clcd.pio = bus.master
653 self.clcd.dma = bus.slave
654 self.kmi0.pio = bus.master
655 self.kmi1.pio = bus.master
656 self.cf_ctrl.pio = bus.master
657 self.cf_ctrl.dma = bus.slave
658 self.dmac_fake.pio = bus.master
659 self.uart1_fake.pio = bus.master
660 self.uart2_fake.pio = bus.master
661 self.uart3_fake.pio = bus.master
662 self.smc_fake.pio = bus.master
663 self.sp810_fake.pio = bus.master
664 self.watchdog_fake.pio = bus.master
665 self.gpio0_fake.pio = bus.master
666 self.gpio1_fake.pio = bus.master
667 self.gpio2_fake.pio = bus.master
668 self.ssp_fake.pio = bus.master
669 self.sci_fake.pio = bus.master
670 self.aaci_fake.pio = bus.master
671 self.mmc_fake.pio = bus.master
672 self.rtc.pio = bus.master
673 self.flash_fake.pio = bus.master
674 self.energy_ctrl.pio = bus.master
675
676 # Set the clock domain for IO objects that are considered
677 # to be "far" away from the cores.
678 def offChipIOClkDomain(self, clkdomain):
679 self.uart.clk_domain = clkdomain
680 self.realview_io.clk_domain = clkdomain
681 self.timer0.clk_domain = clkdomain
682 self.timer1.clk_domain = clkdomain
683 self.clcd.clk_domain = clkdomain
684 self.kmi0.clk_domain = clkdomain
685 self.kmi1.clk_domain = clkdomain
686 self.cf_ctrl.clk_domain = clkdomain
687 self.dmac_fake.clk_domain = clkdomain
688 self.uart1_fake.clk_domain = clkdomain
689 self.uart2_fake.clk_domain = clkdomain
690 self.uart3_fake.clk_domain = clkdomain
691 self.smc_fake.clk_domain = clkdomain
692 self.sp810_fake.clk_domain = clkdomain
693 self.watchdog_fake.clk_domain = clkdomain
694 self.gpio0_fake.clk_domain = clkdomain
695 self.gpio1_fake.clk_domain = clkdomain
696 self.gpio2_fake.clk_domain = clkdomain
697 self.ssp_fake.clk_domain = clkdomain
698 self.sci_fake.clk_domain = clkdomain
699 self.aaci_fake.clk_domain = clkdomain
700 self.mmc_fake.clk_domain = clkdomain
701 self.rtc.clk_domain = clkdomain
702 self.flash_fake.clk_domain = clkdomain
703 self.energy_ctrl.clk_domain = clkdomain
704
705class VExpress_EMM(RealView):
| 497
498 def _on_chip_devices(self):
499 return []
500
501 def _off_chip_devices(self):
502 return []
503
504 _off_chip_ranges = []
505
506 def _attach_device(self, device, bus, dma_ports=None):
507 if hasattr(device, "pio"):
508 device.pio = bus.master
509 if hasattr(device, "dma"):
510 if dma_ports is None:
511 device.dma = bus.slave
512 else:
513 dma_ports.append(device.dma)
514
515 def _attach_io(self, devices, *args, **kwargs):
516 for d in devices:
517 self._attach_device(d, *args, **kwargs)
518
519 def _attach_clk(self, devices, clkdomain):
520 for d in devices:
521 if hasattr(d, "clk_domain"):
522 d.clk_domain = clkdomain
523
524 def attachPciDevices(self):
525 pass
526
527 def enableMSIX(self):
528 pass
529
530 def onChipIOClkDomain(self, clkdomain):
531 self._attach_clk(self._on_chip_devices(), clkdomain)
532
533 def offChipIOClkDomain(self, clkdomain):
534 self._attach_clk(self._off_chip_devices(), clkdomain)
535
536 def attachOnChipIO(self, bus, bridge=None, *args, **kwargs):
537 self._attach_io(self._on_chip_devices(), bus, *args, **kwargs)
538 if bridge:
539 bridge.ranges = self._off_chip_ranges
540
541 def attachIO(self, *args, **kwargs):
542 self._attach_io(self._off_chip_devices(), *args, **kwargs)
543
544 def setupBootLoader(self, mem_bus, cur_sys, loc):
545 cur_sys.bootmem = SimpleMemory(
546 range = AddrRange('2GB', size = '64MB'),
547 conf_table_reported = False)
548 if mem_bus is not None:
549 cur_sys.bootmem.port = mem_bus.master
550 cur_sys.boot_loader = loc('boot.arm')
551 cur_sys.atags_addr = 0x100
552 cur_sys.load_offset = 0
553
554 def generateDeviceTree(self, state):
555 node = FdtNode("/") # Things in this module need to end up in the root
556 node.append(FdtPropertyWords("interrupt-parent",
557 state.phandle(self.gic)))
558
559 for subnode in self.recurseDeviceTree(state):
560 node.append(subnode)
561
562 yield node
563
564 def annotateCpuDeviceNode(self, cpu, state):
565 cpu.append(FdtPropertyStrings("enable-method", "spin-table"))
566 cpu.append(FdtPropertyWords("cpu-release-addr", \
567 state.addrCells(0x8000fff8)))
568
569# Reference for memory map and interrupt number
570# RealView Platform Baseboard Explore for Cortex-A9 User Guide(ARM DUI 0440A)
571# Chapter 4: Programmer's Reference
572class RealViewPBX(RealView):
573 uart = Pl011(pio_addr=0x10009000, int_num=44)
574 realview_io = RealViewCtrl(pio_addr=0x10000000)
575 mcc = VExpressMCC()
576 dcc = CoreTile2A15DCC()
577 gic = Gic400(cpu_addr=0x1f000100, dist_addr=0x1f001000, cpu_size=0x100)
578 pci_host = GenericPciHost(
579 conf_base=0x30000000, conf_size='256MB', conf_device_bits=16,
580 pci_pio_base=0)
581 timer0 = Sp804(int_num0=36, int_num1=36, pio_addr=0x10011000)
582 timer1 = Sp804(int_num0=37, int_num1=37, pio_addr=0x10012000)
583 global_timer = A9GlobalTimer(int_num=27, pio_addr=0x1f000200)
584 local_cpu_timer = CpuLocalTimer(int_timer=ArmPPI(num=29),
585 int_watchdog=ArmPPI(num=30),
586 pio_addr=0x1f000600)
587 clcd = Pl111(pio_addr=0x10020000, int_num=55)
588 kmi0 = Pl050(pio_addr=0x10006000, int_num=52, ps2=PS2Keyboard())
589 kmi1 = Pl050(pio_addr=0x10007000, int_num=53, ps2=PS2TouchKit())
590 a9scu = A9SCU(pio_addr=0x1f000000)
591 cf_ctrl = IdeController(disks=[], pci_func=0, pci_dev=7, pci_bus=2,
592 io_shift = 1, ctrl_offset = 2, Command = 0x1,
593 BAR0 = 0x18000000, BAR0Size = '16B',
594 BAR1 = 0x18000100, BAR1Size = '1B',
595 BAR0LegacyIO = True, BAR1LegacyIO = True)
596
597
598 l2x0_fake = IsaFake(pio_addr=0x1f002000, pio_size=0xfff)
599 flash_fake = IsaFake(pio_addr=0x40000000, pio_size=0x20000000,
600 fake_mem=True)
601 dmac_fake = AmbaFake(pio_addr=0x10030000)
602 uart1_fake = AmbaFake(pio_addr=0x1000a000)
603 uart2_fake = AmbaFake(pio_addr=0x1000b000)
604 uart3_fake = AmbaFake(pio_addr=0x1000c000)
605 smc_fake = AmbaFake(pio_addr=0x100e1000)
606 sp810_fake = AmbaFake(pio_addr=0x10001000, ignore_access=True)
607 watchdog_fake = AmbaFake(pio_addr=0x10010000)
608 gpio0_fake = AmbaFake(pio_addr=0x10013000)
609 gpio1_fake = AmbaFake(pio_addr=0x10014000)
610 gpio2_fake = AmbaFake(pio_addr=0x10015000)
611 ssp_fake = AmbaFake(pio_addr=0x1000d000)
612 sci_fake = AmbaFake(pio_addr=0x1000e000)
613 aaci_fake = AmbaFake(pio_addr=0x10004000)
614 mmc_fake = AmbaFake(pio_addr=0x10005000)
615 rtc = PL031(pio_addr=0x10017000, int_num=42)
616 energy_ctrl = EnergyCtrl(pio_addr=0x1000f000)
617
618
619 # Attach I/O devices that are on chip and also set the appropriate
620 # ranges for the bridge
621 def attachOnChipIO(self, bus, bridge):
622 self.gic.pio = bus.master
623 self.l2x0_fake.pio = bus.master
624 self.a9scu.pio = bus.master
625 self.global_timer.pio = bus.master
626 self.local_cpu_timer.pio = bus.master
627 # Bridge ranges based on excluding what is part of on-chip I/O
628 # (gic, l2x0, a9scu, local_cpu_timer)
629 bridge.ranges = [AddrRange(self.realview_io.pio_addr,
630 self.a9scu.pio_addr - 1),
631 AddrRange(self.flash_fake.pio_addr,
632 self.flash_fake.pio_addr + \
633 self.flash_fake.pio_size - 1)]
634
635 # Set the clock domain for IO objects that are considered
636 # to be "close" to the cores.
637 def onChipIOClkDomain(self, clkdomain):
638 self.gic.clk_domain = clkdomain
639 self.l2x0_fake.clk_domain = clkdomain
640 self.a9scu.clkdomain = clkdomain
641 self.local_cpu_timer.clk_domain = clkdomain
642
643 # Attach I/O devices to specified bus object. Can't do this
644 # earlier, since the bus object itself is typically defined at the
645 # System level.
646 def attachIO(self, bus):
647 self.uart.pio = bus.master
648 self.realview_io.pio = bus.master
649 self.pci_host.pio = bus.master
650 self.timer0.pio = bus.master
651 self.timer1.pio = bus.master
652 self.clcd.pio = bus.master
653 self.clcd.dma = bus.slave
654 self.kmi0.pio = bus.master
655 self.kmi1.pio = bus.master
656 self.cf_ctrl.pio = bus.master
657 self.cf_ctrl.dma = bus.slave
658 self.dmac_fake.pio = bus.master
659 self.uart1_fake.pio = bus.master
660 self.uart2_fake.pio = bus.master
661 self.uart3_fake.pio = bus.master
662 self.smc_fake.pio = bus.master
663 self.sp810_fake.pio = bus.master
664 self.watchdog_fake.pio = bus.master
665 self.gpio0_fake.pio = bus.master
666 self.gpio1_fake.pio = bus.master
667 self.gpio2_fake.pio = bus.master
668 self.ssp_fake.pio = bus.master
669 self.sci_fake.pio = bus.master
670 self.aaci_fake.pio = bus.master
671 self.mmc_fake.pio = bus.master
672 self.rtc.pio = bus.master
673 self.flash_fake.pio = bus.master
674 self.energy_ctrl.pio = bus.master
675
676 # Set the clock domain for IO objects that are considered
677 # to be "far" away from the cores.
678 def offChipIOClkDomain(self, clkdomain):
679 self.uart.clk_domain = clkdomain
680 self.realview_io.clk_domain = clkdomain
681 self.timer0.clk_domain = clkdomain
682 self.timer1.clk_domain = clkdomain
683 self.clcd.clk_domain = clkdomain
684 self.kmi0.clk_domain = clkdomain
685 self.kmi1.clk_domain = clkdomain
686 self.cf_ctrl.clk_domain = clkdomain
687 self.dmac_fake.clk_domain = clkdomain
688 self.uart1_fake.clk_domain = clkdomain
689 self.uart2_fake.clk_domain = clkdomain
690 self.uart3_fake.clk_domain = clkdomain
691 self.smc_fake.clk_domain = clkdomain
692 self.sp810_fake.clk_domain = clkdomain
693 self.watchdog_fake.clk_domain = clkdomain
694 self.gpio0_fake.clk_domain = clkdomain
695 self.gpio1_fake.clk_domain = clkdomain
696 self.gpio2_fake.clk_domain = clkdomain
697 self.ssp_fake.clk_domain = clkdomain
698 self.sci_fake.clk_domain = clkdomain
699 self.aaci_fake.clk_domain = clkdomain
700 self.mmc_fake.clk_domain = clkdomain
701 self.rtc.clk_domain = clkdomain
702 self.flash_fake.clk_domain = clkdomain
703 self.energy_ctrl.clk_domain = clkdomain
704
705class VExpress_EMM(RealView):
|
706 _mem_regions = [(Addr('2GB'), Addr('2GB'))]
| 706 _mem_regions = [ AddrRange('2GB', size='2GB') ]
|
707
708 # Ranges based on excluding what is part of on-chip I/O (gic,
709 # a9scu)
710 _off_chip_ranges = [AddrRange(0x2F000000, size='16MB'),
711 AddrRange(0x30000000, size='256MB'),
712 AddrRange(0x40000000, size='512MB'),
713 AddrRange(0x18000000, size='64MB'),
714 AddrRange(0x1C000000, size='64MB')]
715
716 # Platform control device (off-chip)
717 realview_io = RealViewCtrl(proc_id0=0x14000000, proc_id1=0x14000000,
718 idreg=0x02250000, pio_addr=0x1C010000)
719
720 mcc = VExpressMCC()
721 dcc = CoreTile2A15DCC()
722
723 ### On-chip devices ###
724 gic = Gic400(dist_addr=0x2C001000, cpu_addr=0x2C002000)
725 vgic = VGic(vcpu_addr=0x2c006000, hv_addr=0x2c004000, ppint=25)
726
727 local_cpu_timer = CpuLocalTimer(int_timer=ArmPPI(num=29),
728 int_watchdog=ArmPPI(num=30),
729 pio_addr=0x2C080000)
730
731 hdlcd = HDLcd(pxl_clk=dcc.osc_pxl,
732 pio_addr=0x2b000000, int_num=117,
733 workaround_swap_rb=True)
734
735 def _on_chip_devices(self):
736 devices = [
737 self.gic, self.vgic,
738 self.local_cpu_timer
739 ]
740 if hasattr(self, "gicv2m"):
741 devices.append(self.gicv2m)
742 devices.append(self.hdlcd)
743 return devices
744
745 ### Off-chip devices ###
746 uart = Pl011(pio_addr=0x1c090000, int_num=37)
747 pci_host = GenericPciHost(
748 conf_base=0x30000000, conf_size='256MB', conf_device_bits=16,
749 pci_pio_base=0)
750
751 generic_timer = GenericTimer(int_phys_s=ArmPPI(num=29),
752 int_phys_ns=ArmPPI(num=30),
753 int_virt=ArmPPI(num=27),
754 int_hyp=ArmPPI(num=26))
755
756 timer0 = Sp804(int_num0=34, int_num1=34, pio_addr=0x1C110000, clock0='1MHz', clock1='1MHz')
757 timer1 = Sp804(int_num0=35, int_num1=35, pio_addr=0x1C120000, clock0='1MHz', clock1='1MHz')
758 clcd = Pl111(pio_addr=0x1c1f0000, int_num=46)
759 kmi0 = Pl050(pio_addr=0x1c060000, int_num=44, ps2=PS2Keyboard())
760 kmi1 = Pl050(pio_addr=0x1c070000, int_num=45, ps2=PS2TouchKit())
761 cf_ctrl = IdeController(disks=[], pci_func=0, pci_dev=0, pci_bus=2,
762 io_shift = 2, ctrl_offset = 2, Command = 0x1,
763 BAR0 = 0x1C1A0000, BAR0Size = '256B',
764 BAR1 = 0x1C1A0100, BAR1Size = '4096B',
765 BAR0LegacyIO = True, BAR1LegacyIO = True)
766
767 vram = SimpleMemory(range = AddrRange(0x18000000, size='32MB'),
768 conf_table_reported = False)
769 rtc = PL031(pio_addr=0x1C170000, int_num=36)
770
771 l2x0_fake = IsaFake(pio_addr=0x2C100000, pio_size=0xfff)
772 uart1_fake = AmbaFake(pio_addr=0x1C0A0000)
773 uart2_fake = AmbaFake(pio_addr=0x1C0B0000)
774 uart3_fake = AmbaFake(pio_addr=0x1C0C0000)
775 sp810_fake = AmbaFake(pio_addr=0x1C020000, ignore_access=True)
776 watchdog_fake = AmbaFake(pio_addr=0x1C0F0000)
777 aaci_fake = AmbaFake(pio_addr=0x1C040000)
778 lan_fake = IsaFake(pio_addr=0x1A000000, pio_size=0xffff)
779 usb_fake = IsaFake(pio_addr=0x1B000000, pio_size=0x1ffff)
780 mmc_fake = AmbaFake(pio_addr=0x1c050000)
781 energy_ctrl = EnergyCtrl(pio_addr=0x1c080000)
782
783 def _off_chip_devices(self):
784 devices = [
785 self.uart,
786 self.realview_io,
787 self.pci_host,
788 self.timer0,
789 self.timer1,
790 self.clcd,
791 self.kmi0,
792 self.kmi1,
793 self.cf_ctrl,
794 self.rtc,
795 self.vram,
796 self.l2x0_fake,
797 self.uart1_fake,
798 self.uart2_fake,
799 self.uart3_fake,
800 self.sp810_fake,
801 self.watchdog_fake,
802 self.aaci_fake,
803 self.lan_fake,
804 self.usb_fake,
805 self.mmc_fake,
806 self.energy_ctrl,
807 ]
808 # Try to attach the I/O if it exists
809 if hasattr(self, "ide"):
810 devices.append(self.ide)
811 if hasattr(self, "ethernet"):
812 devices.append(self.ethernet)
813 return devices
814
815 # Attach any PCI devices that are supported
816 def attachPciDevices(self):
817 self.ethernet = IGbE_e1000(pci_bus=0, pci_dev=0, pci_func=0,
818 InterruptLine=1, InterruptPin=1)
819 self.ide = IdeController(disks = [], pci_bus=0, pci_dev=1, pci_func=0,
820 InterruptLine=2, InterruptPin=2)
821
822 def enableMSIX(self):
823 self.gic = Gic400(dist_addr=0x2C001000, cpu_addr=0x2C002000,
824 it_lines=512)
825 self.gicv2m = Gicv2m()
826 self.gicv2m.frames = [Gicv2mFrame(spi_base=256, spi_len=64, addr=0x2C1C0000)]
827
828 def setupBootLoader(self, mem_bus, cur_sys, loc):
829 cur_sys.bootmem = SimpleMemory(range = AddrRange('64MB'),
830 conf_table_reported = False)
831 if mem_bus is not None:
832 cur_sys.bootmem.port = mem_bus.master
833 if not cur_sys.boot_loader:
834 cur_sys.boot_loader = loc('boot_emm.arm')
835 cur_sys.atags_addr = 0x8000000
836 cur_sys.load_offset = 0x80000000
837
838class VExpress_EMM64(VExpress_EMM):
839 # Three memory regions are specified totalling 512GB
| 707
708 # Ranges based on excluding what is part of on-chip I/O (gic,
709 # a9scu)
710 _off_chip_ranges = [AddrRange(0x2F000000, size='16MB'),
711 AddrRange(0x30000000, size='256MB'),
712 AddrRange(0x40000000, size='512MB'),
713 AddrRange(0x18000000, size='64MB'),
714 AddrRange(0x1C000000, size='64MB')]
715
716 # Platform control device (off-chip)
717 realview_io = RealViewCtrl(proc_id0=0x14000000, proc_id1=0x14000000,
718 idreg=0x02250000, pio_addr=0x1C010000)
719
720 mcc = VExpressMCC()
721 dcc = CoreTile2A15DCC()
722
723 ### On-chip devices ###
724 gic = Gic400(dist_addr=0x2C001000, cpu_addr=0x2C002000)
725 vgic = VGic(vcpu_addr=0x2c006000, hv_addr=0x2c004000, ppint=25)
726
727 local_cpu_timer = CpuLocalTimer(int_timer=ArmPPI(num=29),
728 int_watchdog=ArmPPI(num=30),
729 pio_addr=0x2C080000)
730
731 hdlcd = HDLcd(pxl_clk=dcc.osc_pxl,
732 pio_addr=0x2b000000, int_num=117,
733 workaround_swap_rb=True)
734
735 def _on_chip_devices(self):
736 devices = [
737 self.gic, self.vgic,
738 self.local_cpu_timer
739 ]
740 if hasattr(self, "gicv2m"):
741 devices.append(self.gicv2m)
742 devices.append(self.hdlcd)
743 return devices
744
745 ### Off-chip devices ###
746 uart = Pl011(pio_addr=0x1c090000, int_num=37)
747 pci_host = GenericPciHost(
748 conf_base=0x30000000, conf_size='256MB', conf_device_bits=16,
749 pci_pio_base=0)
750
751 generic_timer = GenericTimer(int_phys_s=ArmPPI(num=29),
752 int_phys_ns=ArmPPI(num=30),
753 int_virt=ArmPPI(num=27),
754 int_hyp=ArmPPI(num=26))
755
756 timer0 = Sp804(int_num0=34, int_num1=34, pio_addr=0x1C110000, clock0='1MHz', clock1='1MHz')
757 timer1 = Sp804(int_num0=35, int_num1=35, pio_addr=0x1C120000, clock0='1MHz', clock1='1MHz')
758 clcd = Pl111(pio_addr=0x1c1f0000, int_num=46)
759 kmi0 = Pl050(pio_addr=0x1c060000, int_num=44, ps2=PS2Keyboard())
760 kmi1 = Pl050(pio_addr=0x1c070000, int_num=45, ps2=PS2TouchKit())
761 cf_ctrl = IdeController(disks=[], pci_func=0, pci_dev=0, pci_bus=2,
762 io_shift = 2, ctrl_offset = 2, Command = 0x1,
763 BAR0 = 0x1C1A0000, BAR0Size = '256B',
764 BAR1 = 0x1C1A0100, BAR1Size = '4096B',
765 BAR0LegacyIO = True, BAR1LegacyIO = True)
766
767 vram = SimpleMemory(range = AddrRange(0x18000000, size='32MB'),
768 conf_table_reported = False)
769 rtc = PL031(pio_addr=0x1C170000, int_num=36)
770
771 l2x0_fake = IsaFake(pio_addr=0x2C100000, pio_size=0xfff)
772 uart1_fake = AmbaFake(pio_addr=0x1C0A0000)
773 uart2_fake = AmbaFake(pio_addr=0x1C0B0000)
774 uart3_fake = AmbaFake(pio_addr=0x1C0C0000)
775 sp810_fake = AmbaFake(pio_addr=0x1C020000, ignore_access=True)
776 watchdog_fake = AmbaFake(pio_addr=0x1C0F0000)
777 aaci_fake = AmbaFake(pio_addr=0x1C040000)
778 lan_fake = IsaFake(pio_addr=0x1A000000, pio_size=0xffff)
779 usb_fake = IsaFake(pio_addr=0x1B000000, pio_size=0x1ffff)
780 mmc_fake = AmbaFake(pio_addr=0x1c050000)
781 energy_ctrl = EnergyCtrl(pio_addr=0x1c080000)
782
783 def _off_chip_devices(self):
784 devices = [
785 self.uart,
786 self.realview_io,
787 self.pci_host,
788 self.timer0,
789 self.timer1,
790 self.clcd,
791 self.kmi0,
792 self.kmi1,
793 self.cf_ctrl,
794 self.rtc,
795 self.vram,
796 self.l2x0_fake,
797 self.uart1_fake,
798 self.uart2_fake,
799 self.uart3_fake,
800 self.sp810_fake,
801 self.watchdog_fake,
802 self.aaci_fake,
803 self.lan_fake,
804 self.usb_fake,
805 self.mmc_fake,
806 self.energy_ctrl,
807 ]
808 # Try to attach the I/O if it exists
809 if hasattr(self, "ide"):
810 devices.append(self.ide)
811 if hasattr(self, "ethernet"):
812 devices.append(self.ethernet)
813 return devices
814
815 # Attach any PCI devices that are supported
816 def attachPciDevices(self):
817 self.ethernet = IGbE_e1000(pci_bus=0, pci_dev=0, pci_func=0,
818 InterruptLine=1, InterruptPin=1)
819 self.ide = IdeController(disks = [], pci_bus=0, pci_dev=1, pci_func=0,
820 InterruptLine=2, InterruptPin=2)
821
822 def enableMSIX(self):
823 self.gic = Gic400(dist_addr=0x2C001000, cpu_addr=0x2C002000,
824 it_lines=512)
825 self.gicv2m = Gicv2m()
826 self.gicv2m.frames = [Gicv2mFrame(spi_base=256, spi_len=64, addr=0x2C1C0000)]
827
828 def setupBootLoader(self, mem_bus, cur_sys, loc):
829 cur_sys.bootmem = SimpleMemory(range = AddrRange('64MB'),
830 conf_table_reported = False)
831 if mem_bus is not None:
832 cur_sys.bootmem.port = mem_bus.master
833 if not cur_sys.boot_loader:
834 cur_sys.boot_loader = loc('boot_emm.arm')
835 cur_sys.atags_addr = 0x8000000
836 cur_sys.load_offset = 0x80000000
837
838class VExpress_EMM64(VExpress_EMM):
839 # Three memory regions are specified totalling 512GB
|
840 _mem_regions = [(Addr('2GB'), Addr('2GB')), (Addr('34GB'), Addr('30GB')),
841 (Addr('512GB'), Addr('480GB'))]
| 840 _mem_regions = [ AddrRange('2GB', size='2GB'),
841 AddrRange('34GB', size='30GB'),
842 AddrRange('512GB', size='480GB') ]
|
842 pci_host = GenericPciHost(
843 conf_base=0x30000000, conf_size='256MB', conf_device_bits=12,
844 pci_pio_base=0x2f000000)
845
846 def setupBootLoader(self, mem_bus, cur_sys, loc):
847 cur_sys.bootmem = SimpleMemory(range=AddrRange(0, size='64MB'),
848 conf_table_reported=False)
849 if mem_bus is not None:
850 cur_sys.bootmem.port = mem_bus.master
851 if not cur_sys.boot_loader:
852 cur_sys.boot_loader = loc('boot_emm.arm64')
853 cur_sys.atags_addr = 0x8000000
854 cur_sys.load_offset = 0x80000000
855
856class VExpress_GEM5_Base(RealView):
857 """
858The VExpress gem5 memory map is loosely based on a modified
859Versatile Express RS1 memory map.
860
861The gem5 platform has been designed to implement a subset of the
862original Versatile Express RS1 memory map. Off-chip peripherals should,
863when possible, adhere to the Versatile Express memory map. Non-PCI
864off-chip devices that are gem5-specific should live in the CS5 memory
865space to avoid conflicts with existing devices that we might want to
866model in the future. Such devices should normally have interrupts in
867the gem5-specific SPI range.
868
869On-chip peripherals are loosely modeled after the ARM CoreTile Express
870A15x2 A7x3 memory and interrupt map. In particular, the GIC and
871Generic Timer have the same interrupt lines and base addresses. Other
872on-chip devices are gem5 specific.
873
874Unlike the original Versatile Express RS2 extended platform, gem5 implements a
875large contigious DRAM space, without aliases or holes, starting at the
8762GiB boundary. This means that PCI memory is limited to 1GiB.
877
878Memory map:
879 0x00000000-0x03ffffff: Boot memory (CS0)
880 0x04000000-0x07ffffff: Reserved
881 0x08000000-0x0bffffff: Reserved (CS0 alias)
882 0x0c000000-0x0fffffff: Reserved (Off-chip, CS4)
883 0x10000000-0x13ffffff: gem5-specific peripherals (Off-chip, CS5)
884 0x10000000-0x1000ffff: gem5 energy controller
885 0x10010000-0x1001ffff: gem5 pseudo-ops
886
887 0x14000000-0x17ffffff: Reserved (Off-chip, PSRAM, CS1)
888 0x18000000-0x1bffffff: Reserved (Off-chip, Peripherals, CS2)
889 0x1c000000-0x1fffffff: Peripheral block 1 (Off-chip, CS3):
890 0x1c010000-0x1c01ffff: realview_io (VE system control regs.)
891 0x1c060000-0x1c06ffff: KMI0 (keyboard)
892 0x1c070000-0x1c07ffff: KMI1 (mouse)
893 0x1c090000-0x1c09ffff: UART0
894 0x1c0a0000-0x1c0affff: UART1 (reserved)
895 0x1c0b0000-0x1c0bffff: UART2 (reserved)
896 0x1c0c0000-0x1c0cffff: UART3 (reserved)
897 0x1c130000-0x1c13ffff: VirtIO (gem5/FM extension)
898 0x1c140000-0x1c14ffff: VirtIO (gem5/FM extension)
899 0x1c170000-0x1c17ffff: RTC
900
901 0x20000000-0x3fffffff: On-chip peripherals:
902 0x2b000000-0x2b00ffff: HDLCD
903
904 0x2c001000-0x2c001fff: GIC (distributor)
905 0x2c002000-0x2c003fff: GIC (CPU interface)
906 0x2c004000-0x2c005fff: vGIC (HV)
907 0x2c006000-0x2c007fff: vGIC (VCPU)
908 0x2c1c0000-0x2c1cffff: GICv2m MSI frame 0
909
910 0x2d000000-0x2d00ffff: GPU (reserved)
911
912 0x2f000000-0x2fffffff: PCI IO space
913 0x30000000-0x3fffffff: PCI config space
914
915 0x40000000-0x7fffffff: Ext. AXI: Used as PCI memory
916
917 0x80000000-X: DRAM
918
919Interrupts:
920 0- 15: Software generated interrupts (SGIs)
921 16- 31: On-chip private peripherals (PPIs)
922 25 : vgic
923 26 : generic_timer (hyp)
924 27 : generic_timer (virt)
925 28 : Reserved (Legacy FIQ)
926 29 : generic_timer (phys, sec)
927 30 : generic_timer (phys, non-sec)
928 31 : Reserved (Legacy IRQ)
929 32- 95: Mother board peripherals (SPIs)
930 32 : Reserved (SP805)
931 33 : Reserved (IOFPGA SW int)
932 34-35: Reserved (SP804)
933 36 : RTC
934 37-40: uart0-uart3
935 41-42: Reserved (PL180)
936 43 : Reserved (AACI)
937 44-45: kmi0-kmi1
938 46 : Reserved (CLCD)
939 47 : Reserved (Ethernet)
940 48 : Reserved (USB)
941 95-255: On-chip interrupt sources (we use these for
942 gem5-specific devices, SPIs)
943 74 : VirtIO (gem5/FM extension)
944 75 : VirtIO (gem5/FM extension)
945 95 : HDLCD
946 96- 98: GPU (reserved)
947 100-103: PCI
948 256-319: MSI frame 0 (gem5-specific, SPIs)
949 320-511: Unused
950
951 """
952
953 # Everything above 2GiB is memory
| 843 pci_host = GenericPciHost(
844 conf_base=0x30000000, conf_size='256MB', conf_device_bits=12,
845 pci_pio_base=0x2f000000)
846
847 def setupBootLoader(self, mem_bus, cur_sys, loc):
848 cur_sys.bootmem = SimpleMemory(range=AddrRange(0, size='64MB'),
849 conf_table_reported=False)
850 if mem_bus is not None:
851 cur_sys.bootmem.port = mem_bus.master
852 if not cur_sys.boot_loader:
853 cur_sys.boot_loader = loc('boot_emm.arm64')
854 cur_sys.atags_addr = 0x8000000
855 cur_sys.load_offset = 0x80000000
856
857class VExpress_GEM5_Base(RealView):
858 """
859The VExpress gem5 memory map is loosely based on a modified
860Versatile Express RS1 memory map.
861
862The gem5 platform has been designed to implement a subset of the
863original Versatile Express RS1 memory map. Off-chip peripherals should,
864when possible, adhere to the Versatile Express memory map. Non-PCI
865off-chip devices that are gem5-specific should live in the CS5 memory
866space to avoid conflicts with existing devices that we might want to
867model in the future. Such devices should normally have interrupts in
868the gem5-specific SPI range.
869
870On-chip peripherals are loosely modeled after the ARM CoreTile Express
871A15x2 A7x3 memory and interrupt map. In particular, the GIC and
872Generic Timer have the same interrupt lines and base addresses. Other
873on-chip devices are gem5 specific.
874
875Unlike the original Versatile Express RS2 extended platform, gem5 implements a
876large contigious DRAM space, without aliases or holes, starting at the
8772GiB boundary. This means that PCI memory is limited to 1GiB.
878
879Memory map:
880 0x00000000-0x03ffffff: Boot memory (CS0)
881 0x04000000-0x07ffffff: Reserved
882 0x08000000-0x0bffffff: Reserved (CS0 alias)
883 0x0c000000-0x0fffffff: Reserved (Off-chip, CS4)
884 0x10000000-0x13ffffff: gem5-specific peripherals (Off-chip, CS5)
885 0x10000000-0x1000ffff: gem5 energy controller
886 0x10010000-0x1001ffff: gem5 pseudo-ops
887
888 0x14000000-0x17ffffff: Reserved (Off-chip, PSRAM, CS1)
889 0x18000000-0x1bffffff: Reserved (Off-chip, Peripherals, CS2)
890 0x1c000000-0x1fffffff: Peripheral block 1 (Off-chip, CS3):
891 0x1c010000-0x1c01ffff: realview_io (VE system control regs.)
892 0x1c060000-0x1c06ffff: KMI0 (keyboard)
893 0x1c070000-0x1c07ffff: KMI1 (mouse)
894 0x1c090000-0x1c09ffff: UART0
895 0x1c0a0000-0x1c0affff: UART1 (reserved)
896 0x1c0b0000-0x1c0bffff: UART2 (reserved)
897 0x1c0c0000-0x1c0cffff: UART3 (reserved)
898 0x1c130000-0x1c13ffff: VirtIO (gem5/FM extension)
899 0x1c140000-0x1c14ffff: VirtIO (gem5/FM extension)
900 0x1c170000-0x1c17ffff: RTC
901
902 0x20000000-0x3fffffff: On-chip peripherals:
903 0x2b000000-0x2b00ffff: HDLCD
904
905 0x2c001000-0x2c001fff: GIC (distributor)
906 0x2c002000-0x2c003fff: GIC (CPU interface)
907 0x2c004000-0x2c005fff: vGIC (HV)
908 0x2c006000-0x2c007fff: vGIC (VCPU)
909 0x2c1c0000-0x2c1cffff: GICv2m MSI frame 0
910
911 0x2d000000-0x2d00ffff: GPU (reserved)
912
913 0x2f000000-0x2fffffff: PCI IO space
914 0x30000000-0x3fffffff: PCI config space
915
916 0x40000000-0x7fffffff: Ext. AXI: Used as PCI memory
917
918 0x80000000-X: DRAM
919
920Interrupts:
921 0- 15: Software generated interrupts (SGIs)
922 16- 31: On-chip private peripherals (PPIs)
923 25 : vgic
924 26 : generic_timer (hyp)
925 27 : generic_timer (virt)
926 28 : Reserved (Legacy FIQ)
927 29 : generic_timer (phys, sec)
928 30 : generic_timer (phys, non-sec)
929 31 : Reserved (Legacy IRQ)
930 32- 95: Mother board peripherals (SPIs)
931 32 : Reserved (SP805)
932 33 : Reserved (IOFPGA SW int)
933 34-35: Reserved (SP804)
934 36 : RTC
935 37-40: uart0-uart3
936 41-42: Reserved (PL180)
937 43 : Reserved (AACI)
938 44-45: kmi0-kmi1
939 46 : Reserved (CLCD)
940 47 : Reserved (Ethernet)
941 48 : Reserved (USB)
942 95-255: On-chip interrupt sources (we use these for
943 gem5-specific devices, SPIs)
944 74 : VirtIO (gem5/FM extension)
945 75 : VirtIO (gem5/FM extension)
946 95 : HDLCD
947 96- 98: GPU (reserved)
948 100-103: PCI
949 256-319: MSI frame 0 (gem5-specific, SPIs)
950 320-511: Unused
951
952 """
953
954 # Everything above 2GiB is memory
|
954 _mem_regions = [(Addr('2GB'), Addr('510GB'))]
| 955 _mem_regions = [ AddrRange('2GB', size='510GB') ]
|
955
956 _off_chip_ranges = [
957 # CS1-CS5
958 AddrRange(0x0c000000, 0x1fffffff),
959 # External AXI interface (PCI)
960 AddrRange(0x2f000000, 0x7fffffff),
961 ]
962
963 # Platform control device (off-chip)
964 realview_io = RealViewCtrl(proc_id0=0x14000000, proc_id1=0x14000000,
965 idreg=0x02250000, pio_addr=0x1c010000)
966 mcc = VExpressMCC()
967 dcc = CoreTile2A15DCC()
968
969 ### On-chip devices ###
970 generic_timer = GenericTimer(int_phys_s=ArmPPI(num=29),
971 int_phys_ns=ArmPPI(num=30),
972 int_virt=ArmPPI(num=27),
973 int_hyp=ArmPPI(num=26))
974
975 def _on_chip_devices(self):
976 return [
977 self.generic_timer,
978 ]
979
980 ### Off-chip devices ###
981 clock24MHz = SrcClockDomain(clock="24MHz",
982 voltage_domain=VoltageDomain(voltage="3.3V"))
983
984 uart = [
985 Pl011(pio_addr=0x1c090000, int_num=37),
986 ]
987
988 kmi0 = Pl050(pio_addr=0x1c060000, int_num=44, ps2=PS2Keyboard())
989 kmi1 = Pl050(pio_addr=0x1c070000, int_num=45, ps2=PS2TouchKit())
990
991 rtc = PL031(pio_addr=0x1c170000, int_num=36)
992
993 ### gem5-specific off-chip devices ###
994 pci_host = GenericArmPciHost(
995 conf_base=0x30000000, conf_size='256MB', conf_device_bits=12,
996 pci_pio_base=0x2f000000,
997 int_policy="ARM_PCI_INT_DEV", int_base=100, int_count=4)
998
999 energy_ctrl = EnergyCtrl(pio_addr=0x10000000)
1000
1001 vio = [
1002 MmioVirtIO(pio_addr=0x1c130000, pio_size=0x1000,
1003 interrupt=ArmSPI(num=74)),
1004 MmioVirtIO(pio_addr=0x1c140000, pio_size=0x1000,
1005 interrupt=ArmSPI(num=75)),
1006 ]
1007
1008 def _off_chip_devices(self):
1009 return [
1010 self.realview_io,
1011 self.uart[0],
1012 self.kmi0,
1013 self.kmi1,
1014 self.rtc,
1015 self.pci_host,
1016 self.energy_ctrl,
1017 self.clock24MHz,
1018 self.vio[0],
1019 self.vio[1],
1020 ]
1021
1022 def attachPciDevice(self, device, *args, **kwargs):
1023 device.host = self.pci_host
1024 self._attach_device(device, *args, **kwargs)
1025
1026 def setupBootLoader(self, mem_bus, cur_sys, loc):
1027 cur_sys.bootmem = SimpleMemory(range=AddrRange(0, size='64MB'),
1028 conf_table_reported=False)
1029 if mem_bus is not None:
1030 cur_sys.bootmem.port = mem_bus.master
1031 if not cur_sys.boot_loader:
1032 cur_sys.boot_loader = [ loc('boot_emm.arm64'), loc('boot_emm.arm') ]
1033 cur_sys.atags_addr = 0x8000000
1034 cur_sys.load_offset = 0x80000000
1035
1036 # Setup m5ops. It's technically not a part of the boot
1037 # loader, but this is the only place we can configure the
1038 # system.
1039 cur_sys.m5ops_base = 0x10010000
1040
1041 def generateDeviceTree(self, state):
1042 # Generate using standard RealView function
1043 dt = list(super(VExpress_GEM5_Base, self).generateDeviceTree(state))
1044 if len(dt) > 1:
1045 raise Exception("System returned too many DT nodes")
1046 node = dt[0]
1047
1048 node.appendCompatible(["arm,vexpress"])
1049 node.append(FdtPropertyStrings("model", ["V2P-CA15"]))
1050 node.append(FdtPropertyWords("arm,hbi", [0x0]))
1051 node.append(FdtPropertyWords("arm,vexpress,site", [0xf]))
1052
1053 yield node
1054
1055class VExpress_GEM5_V1_Base(VExpress_GEM5_Base):
1056 gic = kvm_gicv2_class(dist_addr=0x2c001000, cpu_addr=0x2c002000,
1057 it_lines=512)
1058 vgic = VGic(vcpu_addr=0x2c006000, hv_addr=0x2c004000, ppint=25)
1059 gicv2m = Gicv2m()
1060 gicv2m.frames = [
1061 Gicv2mFrame(spi_base=256, spi_len=64, addr=0x2c1c0000),
1062 ]
1063
1064 def _on_chip_devices(self):
1065 return super(VExpress_GEM5_V1_Base,self)._on_chip_devices() + [
1066 self.gic, self.vgic, self.gicv2m,
1067 ]
1068
1069class VExpress_GEM5_V1(VExpress_GEM5_V1_Base):
1070 hdlcd = HDLcd(pxl_clk=VExpress_GEM5_V1_Base.dcc.osc_pxl,
1071 pio_addr=0x2b000000, int_num=95)
1072
1073 def _on_chip_devices(self):
1074 return super(VExpress_GEM5_V1,self)._on_chip_devices() + [
1075 self.hdlcd,
1076 ]
1077
1078class VExpress_GEM5_V2_Base(VExpress_GEM5_Base):
1079 gic = Gicv3()
1080
1081 def _on_chip_devices(self):
1082 return super(VExpress_GEM5_V2_Base,self)._on_chip_devices() + [
1083 self.gic,
1084 ]
1085
1086 def setupBootLoader(self, mem_bus, cur_sys, loc):
1087 cur_sys.boot_loader = [ loc('boot_emm_v2.arm64') ]
1088 super(VExpress_GEM5_V2_Base,self).setupBootLoader(mem_bus,
1089 cur_sys, loc)
1090
1091class VExpress_GEM5_V2(VExpress_GEM5_V2_Base):
1092 hdlcd = HDLcd(pxl_clk=VExpress_GEM5_V2_Base.dcc.osc_pxl,
1093 pio_addr=0x2b000000, int_num=95)
1094
1095 def _on_chip_devices(self):
1096 return super(VExpress_GEM5_V2,self)._on_chip_devices() + [
1097 self.hdlcd,
1098 ]
| 956
957 _off_chip_ranges = [
958 # CS1-CS5
959 AddrRange(0x0c000000, 0x1fffffff),
960 # External AXI interface (PCI)
961 AddrRange(0x2f000000, 0x7fffffff),
962 ]
963
964 # Platform control device (off-chip)
965 realview_io = RealViewCtrl(proc_id0=0x14000000, proc_id1=0x14000000,
966 idreg=0x02250000, pio_addr=0x1c010000)
967 mcc = VExpressMCC()
968 dcc = CoreTile2A15DCC()
969
970 ### On-chip devices ###
971 generic_timer = GenericTimer(int_phys_s=ArmPPI(num=29),
972 int_phys_ns=ArmPPI(num=30),
973 int_virt=ArmPPI(num=27),
974 int_hyp=ArmPPI(num=26))
975
976 def _on_chip_devices(self):
977 return [
978 self.generic_timer,
979 ]
980
981 ### Off-chip devices ###
982 clock24MHz = SrcClockDomain(clock="24MHz",
983 voltage_domain=VoltageDomain(voltage="3.3V"))
984
985 uart = [
986 Pl011(pio_addr=0x1c090000, int_num=37),
987 ]
988
989 kmi0 = Pl050(pio_addr=0x1c060000, int_num=44, ps2=PS2Keyboard())
990 kmi1 = Pl050(pio_addr=0x1c070000, int_num=45, ps2=PS2TouchKit())
991
992 rtc = PL031(pio_addr=0x1c170000, int_num=36)
993
994 ### gem5-specific off-chip devices ###
995 pci_host = GenericArmPciHost(
996 conf_base=0x30000000, conf_size='256MB', conf_device_bits=12,
997 pci_pio_base=0x2f000000,
998 int_policy="ARM_PCI_INT_DEV", int_base=100, int_count=4)
999
1000 energy_ctrl = EnergyCtrl(pio_addr=0x10000000)
1001
1002 vio = [
1003 MmioVirtIO(pio_addr=0x1c130000, pio_size=0x1000,
1004 interrupt=ArmSPI(num=74)),
1005 MmioVirtIO(pio_addr=0x1c140000, pio_size=0x1000,
1006 interrupt=ArmSPI(num=75)),
1007 ]
1008
1009 def _off_chip_devices(self):
1010 return [
1011 self.realview_io,
1012 self.uart[0],
1013 self.kmi0,
1014 self.kmi1,
1015 self.rtc,
1016 self.pci_host,
1017 self.energy_ctrl,
1018 self.clock24MHz,
1019 self.vio[0],
1020 self.vio[1],
1021 ]
1022
1023 def attachPciDevice(self, device, *args, **kwargs):
1024 device.host = self.pci_host
1025 self._attach_device(device, *args, **kwargs)
1026
1027 def setupBootLoader(self, mem_bus, cur_sys, loc):
1028 cur_sys.bootmem = SimpleMemory(range=AddrRange(0, size='64MB'),
1029 conf_table_reported=False)
1030 if mem_bus is not None:
1031 cur_sys.bootmem.port = mem_bus.master
1032 if not cur_sys.boot_loader:
1033 cur_sys.boot_loader = [ loc('boot_emm.arm64'), loc('boot_emm.arm') ]
1034 cur_sys.atags_addr = 0x8000000
1035 cur_sys.load_offset = 0x80000000
1036
1037 # Setup m5ops. It's technically not a part of the boot
1038 # loader, but this is the only place we can configure the
1039 # system.
1040 cur_sys.m5ops_base = 0x10010000
1041
1042 def generateDeviceTree(self, state):
1043 # Generate using standard RealView function
1044 dt = list(super(VExpress_GEM5_Base, self).generateDeviceTree(state))
1045 if len(dt) > 1:
1046 raise Exception("System returned too many DT nodes")
1047 node = dt[0]
1048
1049 node.appendCompatible(["arm,vexpress"])
1050 node.append(FdtPropertyStrings("model", ["V2P-CA15"]))
1051 node.append(FdtPropertyWords("arm,hbi", [0x0]))
1052 node.append(FdtPropertyWords("arm,vexpress,site", [0xf]))
1053
1054 yield node
1055
1056class VExpress_GEM5_V1_Base(VExpress_GEM5_Base):
1057 gic = kvm_gicv2_class(dist_addr=0x2c001000, cpu_addr=0x2c002000,
1058 it_lines=512)
1059 vgic = VGic(vcpu_addr=0x2c006000, hv_addr=0x2c004000, ppint=25)
1060 gicv2m = Gicv2m()
1061 gicv2m.frames = [
1062 Gicv2mFrame(spi_base=256, spi_len=64, addr=0x2c1c0000),
1063 ]
1064
1065 def _on_chip_devices(self):
1066 return super(VExpress_GEM5_V1_Base,self)._on_chip_devices() + [
1067 self.gic, self.vgic, self.gicv2m,
1068 ]
1069
1070class VExpress_GEM5_V1(VExpress_GEM5_V1_Base):
1071 hdlcd = HDLcd(pxl_clk=VExpress_GEM5_V1_Base.dcc.osc_pxl,
1072 pio_addr=0x2b000000, int_num=95)
1073
1074 def _on_chip_devices(self):
1075 return super(VExpress_GEM5_V1,self)._on_chip_devices() + [
1076 self.hdlcd,
1077 ]
1078
1079class VExpress_GEM5_V2_Base(VExpress_GEM5_Base):
1080 gic = Gicv3()
1081
1082 def _on_chip_devices(self):
1083 return super(VExpress_GEM5_V2_Base,self)._on_chip_devices() + [
1084 self.gic,
1085 ]
1086
1087 def setupBootLoader(self, mem_bus, cur_sys, loc):
1088 cur_sys.boot_loader = [ loc('boot_emm_v2.arm64') ]
1089 super(VExpress_GEM5_V2_Base,self).setupBootLoader(mem_bus,
1090 cur_sys, loc)
1091
1092class VExpress_GEM5_V2(VExpress_GEM5_V2_Base):
1093 hdlcd = HDLcd(pxl_clk=VExpress_GEM5_V2_Base.dcc.osc_pxl,
1094 pio_addr=0x2b000000, int_num=95)
1095
1096 def _on_chip_devices(self):
1097 return super(VExpress_GEM5_V2,self)._on_chip_devices() + [
1098 self.hdlcd,
1099 ]
|