1/*
2 * Copyright (c) 2011-2012 ARM Limited
3 * All rights reserved
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder. You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2002-2005 The Regents of The University of Michigan
15 * Copyright (c) 2011 Regents of the University of California
16 * Copyright (c) 2013 Advanced Micro Devices, Inc.
17 * Copyright (c) 2013 Mark D. Hill and David A. Wood
18 * All rights reserved.
19 *
20 * Redistribution and use in source and binary forms, with or without
21 * modification, are permitted provided that the following conditions are
22 * met: redistributions of source code must retain the above copyright
23 * notice, this list of conditions and the following disclaimer;
24 * redistributions in binary form must reproduce the above copyright
25 * notice, this list of conditions and the following disclaimer in the
26 * documentation and/or other materials provided with the distribution;
27 * neither the name of the copyright holders nor the names of its
28 * contributors may be used to endorse or promote products derived from
29 * this software without specific prior written permission.
30 *
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
36 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
37 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
38 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
39 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
40 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
41 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
42 *
43 * Authors: Steve Reinhardt
44 * Nathan Binkert
45 * Rick Strong
46 */
47
48#include <iostream>
49#include <sstream>
50#include <string>
51
52#include "arch/tlb.hh"
53#include "base/loader/symtab.hh"
54#include "base/cprintf.hh"
55#include "base/misc.hh"
56#include "base/output.hh"
57#include "base/trace.hh"
58#include "cpu/checker/cpu.hh"
59#include "cpu/base.hh"
60#include "cpu/cpuevent.hh"
61#include "cpu/profile.hh"
62#include "cpu/thread_context.hh"
63#include "debug/Mwait.hh"
64#include "debug/SyscallVerbose.hh"
65#include "mem/page_table.hh"
66#include "params/BaseCPU.hh"
67#include "sim/full_system.hh"
68#include "sim/process.hh"
69#include "sim/sim_events.hh"
70#include "sim/sim_exit.hh"
71#include "sim/system.hh"
72
73// Hack
74#include "sim/stat_control.hh"
75
76using namespace std;
77
78vector<BaseCPU *> BaseCPU::cpuList;
79
80// This variable reflects the max number of threads in any CPU. Be
81// careful to only use it once all the CPUs that you care about have
82// been initialized
83int maxThreadsPerCPU = 1;
84
85CPUProgressEvent::CPUProgressEvent(BaseCPU *_cpu, Tick ival)
86 : Event(Event::Progress_Event_Pri), _interval(ival), lastNumInst(0),
87 cpu(_cpu), _repeatEvent(true)
88{
89 if (_interval)
90 cpu->schedule(this, curTick() + _interval);
91}
92
93void
94CPUProgressEvent::process()
95{
96 Counter temp = cpu->totalOps();
97#ifndef NDEBUG
98 double ipc = double(temp - lastNumInst) / (_interval / cpu->clockPeriod());
99
100 DPRINTFN("%s progress event, total committed:%i, progress insts committed: "
101 "%lli, IPC: %0.8d\n", cpu->name(), temp, temp - lastNumInst,
102 ipc);
103 ipc = 0.0;
104#else
105 cprintf("%lli: %s progress event, total committed:%i, progress insts "
106 "committed: %lli\n", curTick(), cpu->name(), temp,
107 temp - lastNumInst);
108#endif
109 lastNumInst = temp;
110
111 if (_repeatEvent)
112 cpu->schedule(this, curTick() + _interval);
113}
114
115const char *
116CPUProgressEvent::description() const
117{
118 return "CPU Progress";
119}
120
121BaseCPU::BaseCPU(Params *p, bool is_checker)
122 : MemObject(p), instCnt(0), _cpuId(p->cpu_id), _socketId(p->socket_id),
123 _instMasterId(p->system->getMasterId(name() + ".inst")),
124 _dataMasterId(p->system->getMasterId(name() + ".data")),
125 _taskId(ContextSwitchTaskId::Unknown), _pid(Request::invldPid),
126 _switchedOut(p->switched_out), _cacheLineSize(p->system->cacheLineSize()),
127 interrupts(p->interrupts), profileEvent(NULL),
128 numThreads(p->numThreads), system(p->system),
129 functionTraceStream(nullptr), currentFunctionStart(0),
130 currentFunctionEnd(0), functionEntryTick(0),
131 addressMonitor()
132{
133 // if Python did not provide a valid ID, do it here
134 if (_cpuId == -1 ) {
135 _cpuId = cpuList.size();
136 }
137
138 // add self to global list of CPUs
139 cpuList.push_back(this);
140
141 DPRINTF(SyscallVerbose, "Constructing CPU with id %d, socket id %d\n",
142 _cpuId, _socketId);
143
144 if (numThreads > maxThreadsPerCPU)
145 maxThreadsPerCPU = numThreads;
146
147 // allocate per-thread instruction-based event queues
148 comInstEventQueue = new EventQueue *[numThreads];
149 for (ThreadID tid = 0; tid < numThreads; ++tid)
150 comInstEventQueue[tid] =
151 new EventQueue("instruction-based event queue");
152
153 //
154 // set up instruction-count-based termination events, if any
155 //
156 if (p->max_insts_any_thread != 0) {
157 const char *cause = "a thread reached the max instruction count";
158 for (ThreadID tid = 0; tid < numThreads; ++tid)
159 scheduleInstStop(tid, p->max_insts_any_thread, cause);
160 }
161
162 // Set up instruction-count-based termination events for SimPoints
163 // Typically, there are more than one action points.
164 // Simulation.py is responsible to take the necessary actions upon
165 // exitting the simulation loop.
166 if (!p->simpoint_start_insts.empty()) {
167 const char *cause = "simpoint starting point found";
168 for (size_t i = 0; i < p->simpoint_start_insts.size(); ++i)
169 scheduleInstStop(0, p->simpoint_start_insts[i], cause);
170 }
171
172 if (p->max_insts_all_threads != 0) {
173 const char *cause = "all threads reached the max instruction count";
174
175 // allocate & initialize shared downcounter: each event will
176 // decrement this when triggered; simulation will terminate
177 // when counter reaches 0
178 int *counter = new int;
179 *counter = numThreads;
180 for (ThreadID tid = 0; tid < numThreads; ++tid) {
181 Event *event = new CountedExitEvent(cause, *counter);
182 comInstEventQueue[tid]->schedule(event, p->max_insts_all_threads);
183 }
184 }
185
186 // allocate per-thread load-based event queues
187 comLoadEventQueue = new EventQueue *[numThreads];
188 for (ThreadID tid = 0; tid < numThreads; ++tid)
189 comLoadEventQueue[tid] = new EventQueue("load-based event queue");
190
191 //
192 // set up instruction-count-based termination events, if any
193 //
194 if (p->max_loads_any_thread != 0) {
195 const char *cause = "a thread reached the max load count";
196 for (ThreadID tid = 0; tid < numThreads; ++tid)
197 scheduleLoadStop(tid, p->max_loads_any_thread, cause);
198 }
199
200 if (p->max_loads_all_threads != 0) {
201 const char *cause = "all threads reached the max load count";
202 // allocate & initialize shared downcounter: each event will
203 // decrement this when triggered; simulation will terminate
204 // when counter reaches 0
205 int *counter = new int;
206 *counter = numThreads;
207 for (ThreadID tid = 0; tid < numThreads; ++tid) {
208 Event *event = new CountedExitEvent(cause, *counter);
209 comLoadEventQueue[tid]->schedule(event, p->max_loads_all_threads);
210 }
211 }
212
213 functionTracingEnabled = false;
214 if (p->function_trace) {
215 const string fname = csprintf("ftrace.%s", name());
216 functionTraceStream = simout.find(fname);
217 if (!functionTraceStream)
218 functionTraceStream = simout.create(fname);
219
220 currentFunctionStart = currentFunctionEnd = 0;
221 functionEntryTick = p->function_trace_start;
222
223 if (p->function_trace_start == 0) {
224 functionTracingEnabled = true;
225 } else {
226 typedef EventWrapper<BaseCPU, &BaseCPU::enableFunctionTrace> wrap;
227 Event *event = new wrap(this, true);
228 schedule(event, p->function_trace_start);
229 }
230 }
231
232 // The interrupts should always be present unless this CPU is
233 // switched in later or in case it is a checker CPU
234 if (!params()->switched_out && !is_checker) {
235 if (interrupts) {
236 interrupts->setCPU(this);
237 } else {
238 fatal("CPU %s has no interrupt controller.\n"
239 "Ensure createInterruptController() is called.\n", name());
240 }
241 }
242
243 if (FullSystem) {
244 if (params()->profile)
245 profileEvent = new ProfileEvent(this, params()->profile);
246 }
247 tracer = params()->tracer;
248
249 if (params()->isa.size() != numThreads) {
250 fatal("Number of ISAs (%i) assigned to the CPU does not equal number "
251 "of threads (%i).\n", params()->isa.size(), numThreads);
252 }
253}
254
255void
256BaseCPU::enableFunctionTrace()
257{
258 functionTracingEnabled = true;
259}
260
261BaseCPU::~BaseCPU()
262{
263 delete profileEvent;
264 delete[] comLoadEventQueue;
265 delete[] comInstEventQueue;
266}
267
268void
269BaseCPU::armMonitor(Addr address)
270{
271 addressMonitor.armed = true;
272 addressMonitor.vAddr = address;
273 addressMonitor.pAddr = 0x0;
274 DPRINTF(Mwait,"Armed monitor (vAddr=0x%lx)\n", address);
275}
276
277bool
278BaseCPU::mwait(PacketPtr pkt)
279{
280 if(addressMonitor.gotWakeup == false) {
281 int block_size = cacheLineSize();
282 uint64_t mask = ~((uint64_t)(block_size - 1));
283
284 assert(pkt->req->hasPaddr());
285 addressMonitor.pAddr = pkt->getAddr() & mask;
286 addressMonitor.waiting = true;
287
288 DPRINTF(Mwait,"mwait called (vAddr=0x%lx, line's paddr=0x%lx)\n",
289 addressMonitor.vAddr, addressMonitor.pAddr);
290 return true;
291 } else {
292 addressMonitor.gotWakeup = false;
293 return false;
294 }
295}
296
297void
298BaseCPU::mwaitAtomic(ThreadContext *tc, TheISA::TLB *dtb)
299{
300 Request req;
301 Addr addr = addressMonitor.vAddr;
302 int block_size = cacheLineSize();
303 uint64_t mask = ~((uint64_t)(block_size - 1));
304 int size = block_size;
305
306 //The address of the next line if it crosses a cache line boundary.
307 Addr secondAddr = roundDown(addr + size - 1, block_size);
308
309 if (secondAddr > addr)
310 size = secondAddr - addr;
311
312 req.setVirt(0, addr, size, 0x0, dataMasterId(), tc->instAddr());
313
314 // translate to physical address
315 Fault fault = dtb->translateAtomic(&req, tc, BaseTLB::Read);
316 assert(fault == NoFault);
317
318 addressMonitor.pAddr = req.getPaddr() & mask;
319 addressMonitor.waiting = true;
320
321 DPRINTF(Mwait,"mwait called (vAddr=0x%lx, line's paddr=0x%lx)\n",
322 addressMonitor.vAddr, addressMonitor.pAddr);
323}
324
325void
326BaseCPU::init()
327{
328 if (!params()->switched_out) {
329 registerThreadContexts();
330
331 verifyMemoryMode();
332 }
333}
334
335void
336BaseCPU::startup()
337{
338 if (FullSystem) {
339 if (!params()->switched_out && profileEvent)
340 schedule(profileEvent, curTick());
341 }
342
343 if (params()->progress_interval) {
344 new CPUProgressEvent(this, params()->progress_interval);
345 }
346}
347
348ProbePoints::PMUUPtr
349BaseCPU::pmuProbePoint(const char *name)
350{
351 ProbePoints::PMUUPtr ptr;
352 ptr.reset(new ProbePoints::PMU(getProbeManager(), name));
353
354 return ptr;
355}
356
357void
358BaseCPU::regProbePoints()
359{
360 ppCycles = pmuProbePoint("Cycles");
361
362 ppRetiredInsts = pmuProbePoint("RetiredInsts");
363 ppRetiredLoads = pmuProbePoint("RetiredLoads");
364 ppRetiredStores = pmuProbePoint("RetiredStores");
365 ppRetiredBranches = pmuProbePoint("RetiredBranches");
366}
367
368void
369BaseCPU::probeInstCommit(const StaticInstPtr &inst)
370{
371 if (!inst->isMicroop() || inst->isLastMicroop())
372 ppRetiredInsts->notify(1);
373
374
375 if (inst->isLoad())
376 ppRetiredLoads->notify(1);
377
378 if (inst->isStore())
| 1/*
2 * Copyright (c) 2011-2012 ARM Limited
3 * All rights reserved
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder. You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2002-2005 The Regents of The University of Michigan
15 * Copyright (c) 2011 Regents of the University of California
16 * Copyright (c) 2013 Advanced Micro Devices, Inc.
17 * Copyright (c) 2013 Mark D. Hill and David A. Wood
18 * All rights reserved.
19 *
20 * Redistribution and use in source and binary forms, with or without
21 * modification, are permitted provided that the following conditions are
22 * met: redistributions of source code must retain the above copyright
23 * notice, this list of conditions and the following disclaimer;
24 * redistributions in binary form must reproduce the above copyright
25 * notice, this list of conditions and the following disclaimer in the
26 * documentation and/or other materials provided with the distribution;
27 * neither the name of the copyright holders nor the names of its
28 * contributors may be used to endorse or promote products derived from
29 * this software without specific prior written permission.
30 *
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
36 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
37 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
38 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
39 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
40 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
41 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
42 *
43 * Authors: Steve Reinhardt
44 * Nathan Binkert
45 * Rick Strong
46 */
47
48#include <iostream>
49#include <sstream>
50#include <string>
51
52#include "arch/tlb.hh"
53#include "base/loader/symtab.hh"
54#include "base/cprintf.hh"
55#include "base/misc.hh"
56#include "base/output.hh"
57#include "base/trace.hh"
58#include "cpu/checker/cpu.hh"
59#include "cpu/base.hh"
60#include "cpu/cpuevent.hh"
61#include "cpu/profile.hh"
62#include "cpu/thread_context.hh"
63#include "debug/Mwait.hh"
64#include "debug/SyscallVerbose.hh"
65#include "mem/page_table.hh"
66#include "params/BaseCPU.hh"
67#include "sim/full_system.hh"
68#include "sim/process.hh"
69#include "sim/sim_events.hh"
70#include "sim/sim_exit.hh"
71#include "sim/system.hh"
72
73// Hack
74#include "sim/stat_control.hh"
75
76using namespace std;
77
78vector<BaseCPU *> BaseCPU::cpuList;
79
80// This variable reflects the max number of threads in any CPU. Be
81// careful to only use it once all the CPUs that you care about have
82// been initialized
83int maxThreadsPerCPU = 1;
84
85CPUProgressEvent::CPUProgressEvent(BaseCPU *_cpu, Tick ival)
86 : Event(Event::Progress_Event_Pri), _interval(ival), lastNumInst(0),
87 cpu(_cpu), _repeatEvent(true)
88{
89 if (_interval)
90 cpu->schedule(this, curTick() + _interval);
91}
92
93void
94CPUProgressEvent::process()
95{
96 Counter temp = cpu->totalOps();
97#ifndef NDEBUG
98 double ipc = double(temp - lastNumInst) / (_interval / cpu->clockPeriod());
99
100 DPRINTFN("%s progress event, total committed:%i, progress insts committed: "
101 "%lli, IPC: %0.8d\n", cpu->name(), temp, temp - lastNumInst,
102 ipc);
103 ipc = 0.0;
104#else
105 cprintf("%lli: %s progress event, total committed:%i, progress insts "
106 "committed: %lli\n", curTick(), cpu->name(), temp,
107 temp - lastNumInst);
108#endif
109 lastNumInst = temp;
110
111 if (_repeatEvent)
112 cpu->schedule(this, curTick() + _interval);
113}
114
115const char *
116CPUProgressEvent::description() const
117{
118 return "CPU Progress";
119}
120
121BaseCPU::BaseCPU(Params *p, bool is_checker)
122 : MemObject(p), instCnt(0), _cpuId(p->cpu_id), _socketId(p->socket_id),
123 _instMasterId(p->system->getMasterId(name() + ".inst")),
124 _dataMasterId(p->system->getMasterId(name() + ".data")),
125 _taskId(ContextSwitchTaskId::Unknown), _pid(Request::invldPid),
126 _switchedOut(p->switched_out), _cacheLineSize(p->system->cacheLineSize()),
127 interrupts(p->interrupts), profileEvent(NULL),
128 numThreads(p->numThreads), system(p->system),
129 functionTraceStream(nullptr), currentFunctionStart(0),
130 currentFunctionEnd(0), functionEntryTick(0),
131 addressMonitor()
132{
133 // if Python did not provide a valid ID, do it here
134 if (_cpuId == -1 ) {
135 _cpuId = cpuList.size();
136 }
137
138 // add self to global list of CPUs
139 cpuList.push_back(this);
140
141 DPRINTF(SyscallVerbose, "Constructing CPU with id %d, socket id %d\n",
142 _cpuId, _socketId);
143
144 if (numThreads > maxThreadsPerCPU)
145 maxThreadsPerCPU = numThreads;
146
147 // allocate per-thread instruction-based event queues
148 comInstEventQueue = new EventQueue *[numThreads];
149 for (ThreadID tid = 0; tid < numThreads; ++tid)
150 comInstEventQueue[tid] =
151 new EventQueue("instruction-based event queue");
152
153 //
154 // set up instruction-count-based termination events, if any
155 //
156 if (p->max_insts_any_thread != 0) {
157 const char *cause = "a thread reached the max instruction count";
158 for (ThreadID tid = 0; tid < numThreads; ++tid)
159 scheduleInstStop(tid, p->max_insts_any_thread, cause);
160 }
161
162 // Set up instruction-count-based termination events for SimPoints
163 // Typically, there are more than one action points.
164 // Simulation.py is responsible to take the necessary actions upon
165 // exitting the simulation loop.
166 if (!p->simpoint_start_insts.empty()) {
167 const char *cause = "simpoint starting point found";
168 for (size_t i = 0; i < p->simpoint_start_insts.size(); ++i)
169 scheduleInstStop(0, p->simpoint_start_insts[i], cause);
170 }
171
172 if (p->max_insts_all_threads != 0) {
173 const char *cause = "all threads reached the max instruction count";
174
175 // allocate & initialize shared downcounter: each event will
176 // decrement this when triggered; simulation will terminate
177 // when counter reaches 0
178 int *counter = new int;
179 *counter = numThreads;
180 for (ThreadID tid = 0; tid < numThreads; ++tid) {
181 Event *event = new CountedExitEvent(cause, *counter);
182 comInstEventQueue[tid]->schedule(event, p->max_insts_all_threads);
183 }
184 }
185
186 // allocate per-thread load-based event queues
187 comLoadEventQueue = new EventQueue *[numThreads];
188 for (ThreadID tid = 0; tid < numThreads; ++tid)
189 comLoadEventQueue[tid] = new EventQueue("load-based event queue");
190
191 //
192 // set up instruction-count-based termination events, if any
193 //
194 if (p->max_loads_any_thread != 0) {
195 const char *cause = "a thread reached the max load count";
196 for (ThreadID tid = 0; tid < numThreads; ++tid)
197 scheduleLoadStop(tid, p->max_loads_any_thread, cause);
198 }
199
200 if (p->max_loads_all_threads != 0) {
201 const char *cause = "all threads reached the max load count";
202 // allocate & initialize shared downcounter: each event will
203 // decrement this when triggered; simulation will terminate
204 // when counter reaches 0
205 int *counter = new int;
206 *counter = numThreads;
207 for (ThreadID tid = 0; tid < numThreads; ++tid) {
208 Event *event = new CountedExitEvent(cause, *counter);
209 comLoadEventQueue[tid]->schedule(event, p->max_loads_all_threads);
210 }
211 }
212
213 functionTracingEnabled = false;
214 if (p->function_trace) {
215 const string fname = csprintf("ftrace.%s", name());
216 functionTraceStream = simout.find(fname);
217 if (!functionTraceStream)
218 functionTraceStream = simout.create(fname);
219
220 currentFunctionStart = currentFunctionEnd = 0;
221 functionEntryTick = p->function_trace_start;
222
223 if (p->function_trace_start == 0) {
224 functionTracingEnabled = true;
225 } else {
226 typedef EventWrapper<BaseCPU, &BaseCPU::enableFunctionTrace> wrap;
227 Event *event = new wrap(this, true);
228 schedule(event, p->function_trace_start);
229 }
230 }
231
232 // The interrupts should always be present unless this CPU is
233 // switched in later or in case it is a checker CPU
234 if (!params()->switched_out && !is_checker) {
235 if (interrupts) {
236 interrupts->setCPU(this);
237 } else {
238 fatal("CPU %s has no interrupt controller.\n"
239 "Ensure createInterruptController() is called.\n", name());
240 }
241 }
242
243 if (FullSystem) {
244 if (params()->profile)
245 profileEvent = new ProfileEvent(this, params()->profile);
246 }
247 tracer = params()->tracer;
248
249 if (params()->isa.size() != numThreads) {
250 fatal("Number of ISAs (%i) assigned to the CPU does not equal number "
251 "of threads (%i).\n", params()->isa.size(), numThreads);
252 }
253}
254
255void
256BaseCPU::enableFunctionTrace()
257{
258 functionTracingEnabled = true;
259}
260
261BaseCPU::~BaseCPU()
262{
263 delete profileEvent;
264 delete[] comLoadEventQueue;
265 delete[] comInstEventQueue;
266}
267
268void
269BaseCPU::armMonitor(Addr address)
270{
271 addressMonitor.armed = true;
272 addressMonitor.vAddr = address;
273 addressMonitor.pAddr = 0x0;
274 DPRINTF(Mwait,"Armed monitor (vAddr=0x%lx)\n", address);
275}
276
277bool
278BaseCPU::mwait(PacketPtr pkt)
279{
280 if(addressMonitor.gotWakeup == false) {
281 int block_size = cacheLineSize();
282 uint64_t mask = ~((uint64_t)(block_size - 1));
283
284 assert(pkt->req->hasPaddr());
285 addressMonitor.pAddr = pkt->getAddr() & mask;
286 addressMonitor.waiting = true;
287
288 DPRINTF(Mwait,"mwait called (vAddr=0x%lx, line's paddr=0x%lx)\n",
289 addressMonitor.vAddr, addressMonitor.pAddr);
290 return true;
291 } else {
292 addressMonitor.gotWakeup = false;
293 return false;
294 }
295}
296
297void
298BaseCPU::mwaitAtomic(ThreadContext *tc, TheISA::TLB *dtb)
299{
300 Request req;
301 Addr addr = addressMonitor.vAddr;
302 int block_size = cacheLineSize();
303 uint64_t mask = ~((uint64_t)(block_size - 1));
304 int size = block_size;
305
306 //The address of the next line if it crosses a cache line boundary.
307 Addr secondAddr = roundDown(addr + size - 1, block_size);
308
309 if (secondAddr > addr)
310 size = secondAddr - addr;
311
312 req.setVirt(0, addr, size, 0x0, dataMasterId(), tc->instAddr());
313
314 // translate to physical address
315 Fault fault = dtb->translateAtomic(&req, tc, BaseTLB::Read);
316 assert(fault == NoFault);
317
318 addressMonitor.pAddr = req.getPaddr() & mask;
319 addressMonitor.waiting = true;
320
321 DPRINTF(Mwait,"mwait called (vAddr=0x%lx, line's paddr=0x%lx)\n",
322 addressMonitor.vAddr, addressMonitor.pAddr);
323}
324
325void
326BaseCPU::init()
327{
328 if (!params()->switched_out) {
329 registerThreadContexts();
330
331 verifyMemoryMode();
332 }
333}
334
335void
336BaseCPU::startup()
337{
338 if (FullSystem) {
339 if (!params()->switched_out && profileEvent)
340 schedule(profileEvent, curTick());
341 }
342
343 if (params()->progress_interval) {
344 new CPUProgressEvent(this, params()->progress_interval);
345 }
346}
347
348ProbePoints::PMUUPtr
349BaseCPU::pmuProbePoint(const char *name)
350{
351 ProbePoints::PMUUPtr ptr;
352 ptr.reset(new ProbePoints::PMU(getProbeManager(), name));
353
354 return ptr;
355}
356
357void
358BaseCPU::regProbePoints()
359{
360 ppCycles = pmuProbePoint("Cycles");
361
362 ppRetiredInsts = pmuProbePoint("RetiredInsts");
363 ppRetiredLoads = pmuProbePoint("RetiredLoads");
364 ppRetiredStores = pmuProbePoint("RetiredStores");
365 ppRetiredBranches = pmuProbePoint("RetiredBranches");
366}
367
368void
369BaseCPU::probeInstCommit(const StaticInstPtr &inst)
370{
371 if (!inst->isMicroop() || inst->isLastMicroop())
372 ppRetiredInsts->notify(1);
373
374
375 if (inst->isLoad())
376 ppRetiredLoads->notify(1);
377
378 if (inst->isStore())
|
380
381 if (inst->isControl())
382 ppRetiredBranches->notify(1);
383}
384
385void
386BaseCPU::regStats()
387{
388 using namespace Stats;
389
390 numCycles
391 .name(name() + ".numCycles")
392 .desc("number of cpu cycles simulated")
393 ;
394
395 numWorkItemsStarted
396 .name(name() + ".numWorkItemsStarted")
397 .desc("number of work items this cpu started")
398 ;
399
400 numWorkItemsCompleted
401 .name(name() + ".numWorkItemsCompleted")
402 .desc("number of work items this cpu completed")
403 ;
404
405 int size = threadContexts.size();
406 if (size > 1) {
407 for (int i = 0; i < size; ++i) {
408 stringstream namestr;
409 ccprintf(namestr, "%s.ctx%d", name(), i);
410 threadContexts[i]->regStats(namestr.str());
411 }
412 } else if (size == 1)
413 threadContexts[0]->regStats(name());
414}
415
416BaseMasterPort &
417BaseCPU::getMasterPort(const string &if_name, PortID idx)
418{
419 // Get the right port based on name. This applies to all the
420 // subclasses of the base CPU and relies on their implementation
421 // of getDataPort and getInstPort. In all cases there methods
422 // return a MasterPort pointer.
423 if (if_name == "dcache_port")
424 return getDataPort();
425 else if (if_name == "icache_port")
426 return getInstPort();
427 else
428 return MemObject::getMasterPort(if_name, idx);
429}
430
431void
432BaseCPU::registerThreadContexts()
433{
434 ThreadID size = threadContexts.size();
435 for (ThreadID tid = 0; tid < size; ++tid) {
436 ThreadContext *tc = threadContexts[tid];
437
438 /** This is so that contextId and cpuId match where there is a
439 * 1cpu:1context relationship. Otherwise, the order of registration
440 * could affect the assignment and cpu 1 could have context id 3, for
441 * example. We may even want to do something like this for SMT so that
442 * cpu 0 has the lowest thread contexts and cpu N has the highest, but
443 * I'll just do this for now
444 */
445 if (numThreads == 1)
446 tc->setContextId(system->registerThreadContext(tc, _cpuId));
447 else
448 tc->setContextId(system->registerThreadContext(tc));
449
450 if (!FullSystem)
451 tc->getProcessPtr()->assignThreadContext(tc->contextId());
452 }
453}
454
455
456int
457BaseCPU::findContext(ThreadContext *tc)
458{
459 ThreadID size = threadContexts.size();
460 for (ThreadID tid = 0; tid < size; ++tid) {
461 if (tc == threadContexts[tid])
462 return tid;
463 }
464 return 0;
465}
466
467void
468BaseCPU::switchOut()
469{
470 assert(!_switchedOut);
471 _switchedOut = true;
472 if (profileEvent && profileEvent->scheduled())
473 deschedule(profileEvent);
474
475 // Flush all TLBs in the CPU to avoid having stale translations if
476 // it gets switched in later.
477 flushTLBs();
478}
479
480void
481BaseCPU::takeOverFrom(BaseCPU *oldCPU)
482{
483 assert(threadContexts.size() == oldCPU->threadContexts.size());
484 assert(_cpuId == oldCPU->cpuId());
485 assert(_switchedOut);
486 assert(oldCPU != this);
487 _pid = oldCPU->getPid();
488 _taskId = oldCPU->taskId();
489 _switchedOut = false;
490
491 ThreadID size = threadContexts.size();
492 for (ThreadID i = 0; i < size; ++i) {
493 ThreadContext *newTC = threadContexts[i];
494 ThreadContext *oldTC = oldCPU->threadContexts[i];
495
496 newTC->takeOverFrom(oldTC);
497
498 CpuEvent::replaceThreadContext(oldTC, newTC);
499
500 assert(newTC->contextId() == oldTC->contextId());
501 assert(newTC->threadId() == oldTC->threadId());
502 system->replaceThreadContext(newTC, newTC->contextId());
503
504 /* This code no longer works since the zero register (e.g.,
505 * r31 on Alpha) doesn't necessarily contain zero at this
506 * point.
507 if (DTRACE(Context))
508 ThreadContext::compare(oldTC, newTC);
509 */
510
511 BaseMasterPort *old_itb_port = oldTC->getITBPtr()->getMasterPort();
512 BaseMasterPort *old_dtb_port = oldTC->getDTBPtr()->getMasterPort();
513 BaseMasterPort *new_itb_port = newTC->getITBPtr()->getMasterPort();
514 BaseMasterPort *new_dtb_port = newTC->getDTBPtr()->getMasterPort();
515
516 // Move over any table walker ports if they exist
517 if (new_itb_port) {
518 assert(!new_itb_port->isConnected());
519 assert(old_itb_port);
520 assert(old_itb_port->isConnected());
521 BaseSlavePort &slavePort = old_itb_port->getSlavePort();
522 old_itb_port->unbind();
523 new_itb_port->bind(slavePort);
524 }
525 if (new_dtb_port) {
526 assert(!new_dtb_port->isConnected());
527 assert(old_dtb_port);
528 assert(old_dtb_port->isConnected());
529 BaseSlavePort &slavePort = old_dtb_port->getSlavePort();
530 old_dtb_port->unbind();
531 new_dtb_port->bind(slavePort);
532 }
533 newTC->getITBPtr()->takeOverFrom(oldTC->getITBPtr());
534 newTC->getDTBPtr()->takeOverFrom(oldTC->getDTBPtr());
535
536 // Checker whether or not we have to transfer CheckerCPU
537 // objects over in the switch
538 CheckerCPU *oldChecker = oldTC->getCheckerCpuPtr();
539 CheckerCPU *newChecker = newTC->getCheckerCpuPtr();
540 if (oldChecker && newChecker) {
541 BaseMasterPort *old_checker_itb_port =
542 oldChecker->getITBPtr()->getMasterPort();
543 BaseMasterPort *old_checker_dtb_port =
544 oldChecker->getDTBPtr()->getMasterPort();
545 BaseMasterPort *new_checker_itb_port =
546 newChecker->getITBPtr()->getMasterPort();
547 BaseMasterPort *new_checker_dtb_port =
548 newChecker->getDTBPtr()->getMasterPort();
549
550 newChecker->getITBPtr()->takeOverFrom(oldChecker->getITBPtr());
551 newChecker->getDTBPtr()->takeOverFrom(oldChecker->getDTBPtr());
552
553 // Move over any table walker ports if they exist for checker
554 if (new_checker_itb_port) {
555 assert(!new_checker_itb_port->isConnected());
556 assert(old_checker_itb_port);
557 assert(old_checker_itb_port->isConnected());
558 BaseSlavePort &slavePort =
559 old_checker_itb_port->getSlavePort();
560 old_checker_itb_port->unbind();
561 new_checker_itb_port->bind(slavePort);
562 }
563 if (new_checker_dtb_port) {
564 assert(!new_checker_dtb_port->isConnected());
565 assert(old_checker_dtb_port);
566 assert(old_checker_dtb_port->isConnected());
567 BaseSlavePort &slavePort =
568 old_checker_dtb_port->getSlavePort();
569 old_checker_dtb_port->unbind();
570 new_checker_dtb_port->bind(slavePort);
571 }
572 }
573 }
574
575 interrupts = oldCPU->interrupts;
576 interrupts->setCPU(this);
577 oldCPU->interrupts = NULL;
578
579 if (FullSystem) {
580 for (ThreadID i = 0; i < size; ++i)
581 threadContexts[i]->profileClear();
582
583 if (profileEvent)
584 schedule(profileEvent, curTick());
585 }
586
587 // All CPUs have an instruction and a data port, and the new CPU's
588 // ports are dangling while the old CPU has its ports connected
589 // already. Unbind the old CPU and then bind the ports of the one
590 // we are switching to.
591 assert(!getInstPort().isConnected());
592 assert(oldCPU->getInstPort().isConnected());
593 BaseSlavePort &inst_peer_port = oldCPU->getInstPort().getSlavePort();
594 oldCPU->getInstPort().unbind();
595 getInstPort().bind(inst_peer_port);
596
597 assert(!getDataPort().isConnected());
598 assert(oldCPU->getDataPort().isConnected());
599 BaseSlavePort &data_peer_port = oldCPU->getDataPort().getSlavePort();
600 oldCPU->getDataPort().unbind();
601 getDataPort().bind(data_peer_port);
602}
603
604void
605BaseCPU::flushTLBs()
606{
607 for (ThreadID i = 0; i < threadContexts.size(); ++i) {
608 ThreadContext &tc(*threadContexts[i]);
609 CheckerCPU *checker(tc.getCheckerCpuPtr());
610
611 tc.getITBPtr()->flushAll();
612 tc.getDTBPtr()->flushAll();
613 if (checker) {
614 checker->getITBPtr()->flushAll();
615 checker->getDTBPtr()->flushAll();
616 }
617 }
618}
619
620
621BaseCPU::ProfileEvent::ProfileEvent(BaseCPU *_cpu, Tick _interval)
622 : cpu(_cpu), interval(_interval)
623{ }
624
625void
626BaseCPU::ProfileEvent::process()
627{
628 ThreadID size = cpu->threadContexts.size();
629 for (ThreadID i = 0; i < size; ++i) {
630 ThreadContext *tc = cpu->threadContexts[i];
631 tc->profileSample();
632 }
633
634 cpu->schedule(this, curTick() + interval);
635}
636
637void
638BaseCPU::serialize(std::ostream &os)
639{
640 SERIALIZE_SCALAR(instCnt);
641
642 if (!_switchedOut) {
643 /* Unlike _pid, _taskId is not serialized, as they are dynamically
644 * assigned unique ids that are only meaningful for the duration of
645 * a specific run. We will need to serialize the entire taskMap in
646 * system. */
647 SERIALIZE_SCALAR(_pid);
648
649 interrupts->serialize(os);
650
651 // Serialize the threads, this is done by the CPU implementation.
652 for (ThreadID i = 0; i < numThreads; ++i) {
653 nameOut(os, csprintf("%s.xc.%i", name(), i));
654 serializeThread(os, i);
655 }
656 }
657}
658
659void
660BaseCPU::unserialize(Checkpoint *cp, const std::string §ion)
661{
662 UNSERIALIZE_SCALAR(instCnt);
663
664 if (!_switchedOut) {
665 UNSERIALIZE_SCALAR(_pid);
666 interrupts->unserialize(cp, section);
667
668 // Unserialize the threads, this is done by the CPU implementation.
669 for (ThreadID i = 0; i < numThreads; ++i)
670 unserializeThread(cp, csprintf("%s.xc.%i", section, i), i);
671 }
672}
673
674void
675BaseCPU::scheduleInstStop(ThreadID tid, Counter insts, const char *cause)
676{
677 const Tick now(comInstEventQueue[tid]->getCurTick());
678 Event *event(new LocalSimLoopExitEvent(cause, 0));
679
680 comInstEventQueue[tid]->schedule(event, now + insts);
681}
682
683AddressMonitor::AddressMonitor() {
684 armed = false;
685 waiting = false;
686 gotWakeup = false;
687}
688
689bool AddressMonitor::doMonitor(PacketPtr pkt) {
690 assert(pkt->req->hasPaddr());
691 if(armed && waiting) {
692 if(pAddr == pkt->getAddr()) {
693 DPRINTF(Mwait,"pAddr=0x%lx invalidated: waking up core\n",
694 pkt->getAddr());
695 waiting = false;
696 return true;
697 }
698 }
699 return false;
700}
701
702void
703BaseCPU::scheduleLoadStop(ThreadID tid, Counter loads, const char *cause)
704{
705 const Tick now(comLoadEventQueue[tid]->getCurTick());
706 Event *event(new LocalSimLoopExitEvent(cause, 0));
707
708 comLoadEventQueue[tid]->schedule(event, now + loads);
709}
710
711
712void
713BaseCPU::traceFunctionsInternal(Addr pc)
714{
715 if (!debugSymbolTable)
716 return;
717
718 // if pc enters different function, print new function symbol and
719 // update saved range. Otherwise do nothing.
720 if (pc < currentFunctionStart || pc >= currentFunctionEnd) {
721 string sym_str;
722 bool found = debugSymbolTable->findNearestSymbol(pc, sym_str,
723 currentFunctionStart,
724 currentFunctionEnd);
725
726 if (!found) {
727 // no symbol found: use addr as label
728 sym_str = csprintf("0x%x", pc);
729 currentFunctionStart = pc;
730 currentFunctionEnd = pc + 1;
731 }
732
733 ccprintf(*functionTraceStream, " (%d)\n%d: %s",
734 curTick() - functionEntryTick, curTick(), sym_str);
735 functionEntryTick = curTick();
736 }
737}
| 380
381 if (inst->isControl())
382 ppRetiredBranches->notify(1);
383}
384
385void
386BaseCPU::regStats()
387{
388 using namespace Stats;
389
390 numCycles
391 .name(name() + ".numCycles")
392 .desc("number of cpu cycles simulated")
393 ;
394
395 numWorkItemsStarted
396 .name(name() + ".numWorkItemsStarted")
397 .desc("number of work items this cpu started")
398 ;
399
400 numWorkItemsCompleted
401 .name(name() + ".numWorkItemsCompleted")
402 .desc("number of work items this cpu completed")
403 ;
404
405 int size = threadContexts.size();
406 if (size > 1) {
407 for (int i = 0; i < size; ++i) {
408 stringstream namestr;
409 ccprintf(namestr, "%s.ctx%d", name(), i);
410 threadContexts[i]->regStats(namestr.str());
411 }
412 } else if (size == 1)
413 threadContexts[0]->regStats(name());
414}
415
416BaseMasterPort &
417BaseCPU::getMasterPort(const string &if_name, PortID idx)
418{
419 // Get the right port based on name. This applies to all the
420 // subclasses of the base CPU and relies on their implementation
421 // of getDataPort and getInstPort. In all cases there methods
422 // return a MasterPort pointer.
423 if (if_name == "dcache_port")
424 return getDataPort();
425 else if (if_name == "icache_port")
426 return getInstPort();
427 else
428 return MemObject::getMasterPort(if_name, idx);
429}
430
431void
432BaseCPU::registerThreadContexts()
433{
434 ThreadID size = threadContexts.size();
435 for (ThreadID tid = 0; tid < size; ++tid) {
436 ThreadContext *tc = threadContexts[tid];
437
438 /** This is so that contextId and cpuId match where there is a
439 * 1cpu:1context relationship. Otherwise, the order of registration
440 * could affect the assignment and cpu 1 could have context id 3, for
441 * example. We may even want to do something like this for SMT so that
442 * cpu 0 has the lowest thread contexts and cpu N has the highest, but
443 * I'll just do this for now
444 */
445 if (numThreads == 1)
446 tc->setContextId(system->registerThreadContext(tc, _cpuId));
447 else
448 tc->setContextId(system->registerThreadContext(tc));
449
450 if (!FullSystem)
451 tc->getProcessPtr()->assignThreadContext(tc->contextId());
452 }
453}
454
455
456int
457BaseCPU::findContext(ThreadContext *tc)
458{
459 ThreadID size = threadContexts.size();
460 for (ThreadID tid = 0; tid < size; ++tid) {
461 if (tc == threadContexts[tid])
462 return tid;
463 }
464 return 0;
465}
466
467void
468BaseCPU::switchOut()
469{
470 assert(!_switchedOut);
471 _switchedOut = true;
472 if (profileEvent && profileEvent->scheduled())
473 deschedule(profileEvent);
474
475 // Flush all TLBs in the CPU to avoid having stale translations if
476 // it gets switched in later.
477 flushTLBs();
478}
479
480void
481BaseCPU::takeOverFrom(BaseCPU *oldCPU)
482{
483 assert(threadContexts.size() == oldCPU->threadContexts.size());
484 assert(_cpuId == oldCPU->cpuId());
485 assert(_switchedOut);
486 assert(oldCPU != this);
487 _pid = oldCPU->getPid();
488 _taskId = oldCPU->taskId();
489 _switchedOut = false;
490
491 ThreadID size = threadContexts.size();
492 for (ThreadID i = 0; i < size; ++i) {
493 ThreadContext *newTC = threadContexts[i];
494 ThreadContext *oldTC = oldCPU->threadContexts[i];
495
496 newTC->takeOverFrom(oldTC);
497
498 CpuEvent::replaceThreadContext(oldTC, newTC);
499
500 assert(newTC->contextId() == oldTC->contextId());
501 assert(newTC->threadId() == oldTC->threadId());
502 system->replaceThreadContext(newTC, newTC->contextId());
503
504 /* This code no longer works since the zero register (e.g.,
505 * r31 on Alpha) doesn't necessarily contain zero at this
506 * point.
507 if (DTRACE(Context))
508 ThreadContext::compare(oldTC, newTC);
509 */
510
511 BaseMasterPort *old_itb_port = oldTC->getITBPtr()->getMasterPort();
512 BaseMasterPort *old_dtb_port = oldTC->getDTBPtr()->getMasterPort();
513 BaseMasterPort *new_itb_port = newTC->getITBPtr()->getMasterPort();
514 BaseMasterPort *new_dtb_port = newTC->getDTBPtr()->getMasterPort();
515
516 // Move over any table walker ports if they exist
517 if (new_itb_port) {
518 assert(!new_itb_port->isConnected());
519 assert(old_itb_port);
520 assert(old_itb_port->isConnected());
521 BaseSlavePort &slavePort = old_itb_port->getSlavePort();
522 old_itb_port->unbind();
523 new_itb_port->bind(slavePort);
524 }
525 if (new_dtb_port) {
526 assert(!new_dtb_port->isConnected());
527 assert(old_dtb_port);
528 assert(old_dtb_port->isConnected());
529 BaseSlavePort &slavePort = old_dtb_port->getSlavePort();
530 old_dtb_port->unbind();
531 new_dtb_port->bind(slavePort);
532 }
533 newTC->getITBPtr()->takeOverFrom(oldTC->getITBPtr());
534 newTC->getDTBPtr()->takeOverFrom(oldTC->getDTBPtr());
535
536 // Checker whether or not we have to transfer CheckerCPU
537 // objects over in the switch
538 CheckerCPU *oldChecker = oldTC->getCheckerCpuPtr();
539 CheckerCPU *newChecker = newTC->getCheckerCpuPtr();
540 if (oldChecker && newChecker) {
541 BaseMasterPort *old_checker_itb_port =
542 oldChecker->getITBPtr()->getMasterPort();
543 BaseMasterPort *old_checker_dtb_port =
544 oldChecker->getDTBPtr()->getMasterPort();
545 BaseMasterPort *new_checker_itb_port =
546 newChecker->getITBPtr()->getMasterPort();
547 BaseMasterPort *new_checker_dtb_port =
548 newChecker->getDTBPtr()->getMasterPort();
549
550 newChecker->getITBPtr()->takeOverFrom(oldChecker->getITBPtr());
551 newChecker->getDTBPtr()->takeOverFrom(oldChecker->getDTBPtr());
552
553 // Move over any table walker ports if they exist for checker
554 if (new_checker_itb_port) {
555 assert(!new_checker_itb_port->isConnected());
556 assert(old_checker_itb_port);
557 assert(old_checker_itb_port->isConnected());
558 BaseSlavePort &slavePort =
559 old_checker_itb_port->getSlavePort();
560 old_checker_itb_port->unbind();
561 new_checker_itb_port->bind(slavePort);
562 }
563 if (new_checker_dtb_port) {
564 assert(!new_checker_dtb_port->isConnected());
565 assert(old_checker_dtb_port);
566 assert(old_checker_dtb_port->isConnected());
567 BaseSlavePort &slavePort =
568 old_checker_dtb_port->getSlavePort();
569 old_checker_dtb_port->unbind();
570 new_checker_dtb_port->bind(slavePort);
571 }
572 }
573 }
574
575 interrupts = oldCPU->interrupts;
576 interrupts->setCPU(this);
577 oldCPU->interrupts = NULL;
578
579 if (FullSystem) {
580 for (ThreadID i = 0; i < size; ++i)
581 threadContexts[i]->profileClear();
582
583 if (profileEvent)
584 schedule(profileEvent, curTick());
585 }
586
587 // All CPUs have an instruction and a data port, and the new CPU's
588 // ports are dangling while the old CPU has its ports connected
589 // already. Unbind the old CPU and then bind the ports of the one
590 // we are switching to.
591 assert(!getInstPort().isConnected());
592 assert(oldCPU->getInstPort().isConnected());
593 BaseSlavePort &inst_peer_port = oldCPU->getInstPort().getSlavePort();
594 oldCPU->getInstPort().unbind();
595 getInstPort().bind(inst_peer_port);
596
597 assert(!getDataPort().isConnected());
598 assert(oldCPU->getDataPort().isConnected());
599 BaseSlavePort &data_peer_port = oldCPU->getDataPort().getSlavePort();
600 oldCPU->getDataPort().unbind();
601 getDataPort().bind(data_peer_port);
602}
603
604void
605BaseCPU::flushTLBs()
606{
607 for (ThreadID i = 0; i < threadContexts.size(); ++i) {
608 ThreadContext &tc(*threadContexts[i]);
609 CheckerCPU *checker(tc.getCheckerCpuPtr());
610
611 tc.getITBPtr()->flushAll();
612 tc.getDTBPtr()->flushAll();
613 if (checker) {
614 checker->getITBPtr()->flushAll();
615 checker->getDTBPtr()->flushAll();
616 }
617 }
618}
619
620
621BaseCPU::ProfileEvent::ProfileEvent(BaseCPU *_cpu, Tick _interval)
622 : cpu(_cpu), interval(_interval)
623{ }
624
625void
626BaseCPU::ProfileEvent::process()
627{
628 ThreadID size = cpu->threadContexts.size();
629 for (ThreadID i = 0; i < size; ++i) {
630 ThreadContext *tc = cpu->threadContexts[i];
631 tc->profileSample();
632 }
633
634 cpu->schedule(this, curTick() + interval);
635}
636
637void
638BaseCPU::serialize(std::ostream &os)
639{
640 SERIALIZE_SCALAR(instCnt);
641
642 if (!_switchedOut) {
643 /* Unlike _pid, _taskId is not serialized, as they are dynamically
644 * assigned unique ids that are only meaningful for the duration of
645 * a specific run. We will need to serialize the entire taskMap in
646 * system. */
647 SERIALIZE_SCALAR(_pid);
648
649 interrupts->serialize(os);
650
651 // Serialize the threads, this is done by the CPU implementation.
652 for (ThreadID i = 0; i < numThreads; ++i) {
653 nameOut(os, csprintf("%s.xc.%i", name(), i));
654 serializeThread(os, i);
655 }
656 }
657}
658
659void
660BaseCPU::unserialize(Checkpoint *cp, const std::string §ion)
661{
662 UNSERIALIZE_SCALAR(instCnt);
663
664 if (!_switchedOut) {
665 UNSERIALIZE_SCALAR(_pid);
666 interrupts->unserialize(cp, section);
667
668 // Unserialize the threads, this is done by the CPU implementation.
669 for (ThreadID i = 0; i < numThreads; ++i)
670 unserializeThread(cp, csprintf("%s.xc.%i", section, i), i);
671 }
672}
673
674void
675BaseCPU::scheduleInstStop(ThreadID tid, Counter insts, const char *cause)
676{
677 const Tick now(comInstEventQueue[tid]->getCurTick());
678 Event *event(new LocalSimLoopExitEvent(cause, 0));
679
680 comInstEventQueue[tid]->schedule(event, now + insts);
681}
682
683AddressMonitor::AddressMonitor() {
684 armed = false;
685 waiting = false;
686 gotWakeup = false;
687}
688
689bool AddressMonitor::doMonitor(PacketPtr pkt) {
690 assert(pkt->req->hasPaddr());
691 if(armed && waiting) {
692 if(pAddr == pkt->getAddr()) {
693 DPRINTF(Mwait,"pAddr=0x%lx invalidated: waking up core\n",
694 pkt->getAddr());
695 waiting = false;
696 return true;
697 }
698 }
699 return false;
700}
701
702void
703BaseCPU::scheduleLoadStop(ThreadID tid, Counter loads, const char *cause)
704{
705 const Tick now(comLoadEventQueue[tid]->getCurTick());
706 Event *event(new LocalSimLoopExitEvent(cause, 0));
707
708 comLoadEventQueue[tid]->schedule(event, now + loads);
709}
710
711
712void
713BaseCPU::traceFunctionsInternal(Addr pc)
714{
715 if (!debugSymbolTable)
716 return;
717
718 // if pc enters different function, print new function symbol and
719 // update saved range. Otherwise do nothing.
720 if (pc < currentFunctionStart || pc >= currentFunctionEnd) {
721 string sym_str;
722 bool found = debugSymbolTable->findNearestSymbol(pc, sym_str,
723 currentFunctionStart,
724 currentFunctionEnd);
725
726 if (!found) {
727 // no symbol found: use addr as label
728 sym_str = csprintf("0x%x", pc);
729 currentFunctionStart = pc;
730 currentFunctionEnd = pc + 1;
731 }
732
733 ccprintf(*functionTraceStream, " (%d)\n%d: %s",
734 curTick() - functionEntryTick, curTick(), sym_str);
735 functionEntryTick = curTick();
736 }
737}
|