1/*
2 * Copyright (c) 2002-2005 The Regents of The University of Michigan
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions are
7 * met: redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer;
9 * redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution;
12 * neither the name of the copyright holders nor the names of its
13 * contributors may be used to endorse or promote products derived from
14 * this software without specific prior written permission.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 *
28 * Authors: Nathan Binkert
29 */
30
31/*
32 * Copyright (c) 1990, 1993
33 * The Regents of the University of California. All rights reserved.
34 *
35 * This software was developed by the Computer Systems Engineering group
36 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
37 * contributed to Berkeley.
38 *
39 * All advertising materials mentioning features or use of this software
40 * must display the following acknowledgement:
41 * This product includes software developed by the University of
42 * California, Lawrence Berkeley Laboratories.
43 *
44 * Redistribution and use in source and binary forms, with or without
45 * modification, are permitted provided that the following conditions
46 * are met:
47 * 1. Redistributions of source code must retain the above copyright
48 * notice, this list of conditions and the following disclaimer.
49 * 2. Redistributions in binary form must reproduce the above copyright
50 * notice, this list of conditions and the following disclaimer in the
51 * documentation and/or other materials provided with the distribution.
52 * 3. All advertising materials mentioning features or use of this software
53 * must display the following acknowledgement:
54 * This product includes software developed by the University of
55 * California, Berkeley and its contributors.
56 * 4. Neither the name of the University nor the names of its contributors
57 * may be used to endorse or promote products derived from this software
58 * without specific prior written permission.
59 *
60 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
61 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
62 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
63 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
64 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
65 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
66 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
67 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
68 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
69 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
70 * SUCH DAMAGE.
71 *
72 * @(#)kgdb_stub.c 8.4 (Berkeley) 1/12/94
73 */
74
75/*-
76 * Copyright (c) 2001 The NetBSD Foundation, Inc.
77 * All rights reserved.
78 *
79 * This code is derived from software contributed to The NetBSD Foundation
80 * by Jason R. Thorpe.
81 *
82 * Redistribution and use in source and binary forms, with or without
83 * modification, are permitted provided that the following conditions
84 * are met:
85 * 1. Redistributions of source code must retain the above copyright
86 * notice, this list of conditions and the following disclaimer.
87 * 2. Redistributions in binary form must reproduce the above copyright
88 * notice, this list of conditions and the following disclaimer in the
89 * documentation and/or other materials provided with the distribution.
90 * 3. All advertising materials mentioning features or use of this software
91 * must display the following acknowledgement:
92 * This product includes software developed by the NetBSD
93 * Foundation, Inc. and its contributors.
94 * 4. Neither the name of The NetBSD Foundation nor the names of its
95 * contributors may be used to endorse or promote products derived
96 * from this software without specific prior written permission.
97 *
98 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
99 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
100 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
101 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
102 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
103 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
104 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
105 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
106 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
107 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
108 * POSSIBILITY OF SUCH DAMAGE.
109 */
110
111/*
112 * $NetBSD: kgdb_stub.c,v 1.8 2001/07/07 22:58:00 wdk Exp $
113 *
114 * Taken from NetBSD
115 *
116 * "Stub" to allow remote cpu to debug over a serial line using gdb.
117 */
118
119#include <sys/signal.h>
120#include <unistd.h>
121
122#include <cstdio>
123#include <string>
124
125#include "config/full_system.hh"
126
127#if FULL_SYSTEM
128#include "arch/vtophys.hh"
129#include "mem/vport.hh"
130#endif
131
132#include "base/intmath.hh"
133#include "base/remote_gdb.hh"
134#include "base/socket.hh"
135#include "base/trace.hh"
136#include "config/the_isa.hh"
137#include "cpu/static_inst.hh"
138#include "cpu/thread_context.hh"
|
146using namespace TheISA;
147
148#ifndef NDEBUG
149vector<BaseRemoteGDB *> debuggers;
150
151void
152debugger()
153{
154 static int current_debugger = -1;
155 if (current_debugger >= 0 && current_debugger < (int)debuggers.size()) {
156 BaseRemoteGDB *gdb = debuggers[current_debugger];
157 if (!gdb->isattached())
158 gdb->listener->accept();
159 if (gdb->isattached())
160 gdb->trap(SIGILL);
161 }
162}
163#endif
164
165///////////////////////////////////////////////////////////
166//
167//
168//
169
170GDBListener::Event::Event(GDBListener *l, int fd, int e)
171 : PollEvent(fd, e), listener(l)
172{}
173
174void
175GDBListener::Event::process(int revent)
176{
177 listener->accept();
178}
179
180GDBListener::GDBListener(BaseRemoteGDB *g, int p)
181 : event(NULL), gdb(g), port(p)
182{
183 assert(!gdb->listener);
184 gdb->listener = this;
185}
186
187GDBListener::~GDBListener()
188{
189 if (event)
190 delete event;
191}
192
193string
194GDBListener::name()
195{
196 return gdb->name() + ".listener";
197}
198
199void
200GDBListener::listen()
201{
202 if (ListenSocket::allDisabled()) {
203 warn_once("Sockets disabled, not accepting gdb connections");
204 return;
205 }
206
207 while (!listener.listen(port, true)) {
208 DPRINTF(GDBMisc, "Can't bind port %d\n", port);
209 port++;
210 }
211
212 event = new Event(this, listener.getfd(), POLLIN);
213 pollQueue.schedule(event);
214
215#ifndef NDEBUG
216 gdb->number = debuggers.size();
217 debuggers.push_back(gdb);
218#endif
219
220#ifndef NDEBUG
221 ccprintf(cerr, "%d: %s: listening for remote gdb #%d on port %d\n",
222 curTick(), name(), gdb->number, port);
223#else
224 ccprintf(cerr, "%d: %s: listening for remote gdb on port %d\n",
225 curTick(), name(), port);
226#endif
227}
228
229void
230GDBListener::accept()
231{
232 if (!listener.islistening())
233 panic("GDBListener::accept(): cannot accept if we're not listening!");
234
235 int sfd = listener.accept(true);
236
237 if (sfd != -1) {
238 if (gdb->isattached())
239 close(sfd);
240 else
241 gdb->attach(sfd);
242 }
243}
244
245BaseRemoteGDB::Event::Event(BaseRemoteGDB *g, int fd, int e)
246 : PollEvent(fd, e), gdb(g)
247{}
248
249void
250BaseRemoteGDB::Event::process(int revent)
251{
252 if (revent & POLLIN)
253 gdb->trap(SIGILL);
254 else if (revent & POLLNVAL)
255 gdb->detach();
256}
257
258BaseRemoteGDB::BaseRemoteGDB(System *_system, ThreadContext *c, size_t cacheSize)
259 : event(NULL), listener(NULL), number(-1), fd(-1),
260 active(false), attached(false),
261 system(_system), pmem(_system->physmem), context(c),
262 gdbregs(cacheSize)
263{
264 memset(gdbregs.regs, 0, gdbregs.bytes());
265}
266
267BaseRemoteGDB::~BaseRemoteGDB()
268{
269 if (event)
270 delete event;
271}
272
273string
274BaseRemoteGDB::name()
275{
276 return system->name() + ".remote_gdb";
277}
278
279bool
280BaseRemoteGDB::isattached()
281{ return attached; }
282
283void
284BaseRemoteGDB::attach(int f)
285{
286 fd = f;
287
288 event = new Event(this, fd, POLLIN);
289 pollQueue.schedule(event);
290
291 attached = true;
292 DPRINTFN("remote gdb attached\n");
293}
294
295void
296BaseRemoteGDB::detach()
297{
298 attached = false;
299 close(fd);
300 fd = -1;
301
302 pollQueue.remove(event);
303 DPRINTFN("remote gdb detached\n");
304}
305
306const char *
307BaseRemoteGDB::gdb_command(char cmd)
308{
309 switch (cmd) {
310 case GDBSignal: return "KGDB_SIGNAL";
311 case GDBSetBaud: return "KGDB_SET_BAUD";
312 case GDBSetBreak: return "KGDB_SET_BREAK";
313 case GDBCont: return "KGDB_CONT";
314 case GDBAsyncCont: return "KGDB_ASYNC_CONT";
315 case GDBDebug: return "KGDB_DEBUG";
316 case GDBDetach: return "KGDB_DETACH";
317 case GDBRegR: return "KGDB_REG_R";
318 case GDBRegW: return "KGDB_REG_W";
319 case GDBSetThread: return "KGDB_SET_THREAD";
320 case GDBCycleStep: return "KGDB_CYCLE_STEP";
321 case GDBSigCycleStep: return "KGDB_SIG_CYCLE_STEP";
322 case GDBKill: return "KGDB_KILL";
323 case GDBMemW: return "KGDB_MEM_W";
324 case GDBMemR: return "KGDB_MEM_R";
325 case GDBSetReg: return "KGDB_SET_REG";
326 case GDBReadReg: return "KGDB_READ_REG";
327 case GDBQueryVar: return "KGDB_QUERY_VAR";
328 case GDBSetVar: return "KGDB_SET_VAR";
329 case GDBReset: return "KGDB_RESET";
330 case GDBStep: return "KGDB_STEP";
331 case GDBAsyncStep: return "KGDB_ASYNC_STEP";
332 case GDBThreadAlive: return "KGDB_THREAD_ALIVE";
333 case GDBTargetExit: return "KGDB_TARGET_EXIT";
334 case GDBBinaryDload: return "KGDB_BINARY_DLOAD";
335 case GDBClrHwBkpt: return "KGDB_CLR_HW_BKPT";
336 case GDBSetHwBkpt: return "KGDB_SET_HW_BKPT";
337 case GDBStart: return "KGDB_START";
338 case GDBEnd: return "KGDB_END";
339 case GDBGoodP: return "KGDB_GOODP";
340 case GDBBadP: return "KGDB_BADP";
341 default: return "KGDB_UNKNOWN";
342 }
343}
344
345/////////////////////////
346//
347//
348
349uint8_t
350BaseRemoteGDB::getbyte()
351{
352 uint8_t b;
353 if (::read(fd, &b, 1) != 1)
354 warn("could not read byte from debugger");
355 return b;
356}
357
358void
359BaseRemoteGDB::putbyte(uint8_t b)
360{
361 if (::write(fd, &b, 1) != 1)
362 warn("could not write byte to debugger");
363}
364
365// Send a packet to gdb
366void
367BaseRemoteGDB::send(const char *bp)
368{
369 const char *p;
370 uint8_t csum, c;
371
372 DPRINTF(GDBSend, "send: %s\n", bp);
373
374 do {
375 p = bp;
376 //Start sending a packet
377 putbyte(GDBStart);
378 //Send the contents, and also keep a check sum.
379 for (csum = 0; (c = *p); p++) {
380 putbyte(c);
381 csum += c;
382 }
383 //Send the ending character.
384 putbyte(GDBEnd);
385 //Sent the checksum.
386 putbyte(i2digit(csum >> 4));
387 putbyte(i2digit(csum));
388 //Try transmitting over and over again until the other end doesn't send an
389 //error back.
390 } while ((c = getbyte() & 0x7f) == GDBBadP);
391}
392
393// Receive a packet from gdb
394int
395BaseRemoteGDB::recv(char *bp, int maxlen)
396{
397 char *p;
398 int c, csum;
399 int len;
400
401 do {
402 p = bp;
403 csum = len = 0;
404 //Find the beginning of a packet
405 while ((c = getbyte()) != GDBStart)
406 ;
407
408 //Read until you find the end of the data in the packet, and keep
409 //track of the check sum.
410 while ((c = getbyte()) != GDBEnd && len < maxlen) {
411 c &= 0x7f;
412 csum += c;
413 *p++ = c;
414 len++;
415 }
416
417 //Mask the check sum, and terminate the command string.
418 csum &= 0xff;
419 *p = '\0';
420
421 //If the command was too long, report an error.
422 if (len >= maxlen) {
423 putbyte(GDBBadP);
424 continue;
425 }
426
427 //Bring in the checksum. If the check sum matches, csum will be 0.
428 csum -= digit2i(getbyte()) * 16;
429 csum -= digit2i(getbyte());
430
431 //If the check sum was correct
432 if (csum == 0) {
433 //Report that the packet was received correctly
434 putbyte(GDBGoodP);
435 // Sequence present?
436 if (bp[2] == ':') {
437 putbyte(bp[0]);
438 putbyte(bp[1]);
439 len -= 3;
440 memcpy(bp, bp+3, len);
441 }
442 break;
443 }
444 //Otherwise, report that there was a mistake.
445 putbyte(GDBBadP);
446 } while (1);
447
448 DPRINTF(GDBRecv, "recv: %s: %s\n", gdb_command(*bp), bp);
449
450 return (len);
451}
452
453// Read bytes from kernel address space for debugger.
454bool
455BaseRemoteGDB::read(Addr vaddr, size_t size, char *data)
456{
457 static Addr lastaddr = 0;
458 static size_t lastsize = 0;
459
460 if (vaddr < 10) {
461 DPRINTF(GDBRead, "read: reading memory location zero!\n");
462 vaddr = lastaddr + lastsize;
463 }
464
465 DPRINTF(GDBRead, "read: addr=%#x, size=%d", vaddr, size);
466
467#if FULL_SYSTEM
468 VirtualPort *port = context->getVirtPort();
469#else
470 TranslatingPort *port = context->getMemPort();
471#endif
472 port->readBlob(vaddr, (uint8_t*)data, size);
473
474#if TRACING_ON
475 if (DTRACE(GDBRead)) {
476 if (DTRACE(GDBExtra)) {
477 char buf[1024];
478 mem2hex(buf, data, size);
479 DPRINTFNR(": %s\n", buf);
480 } else
481 DPRINTFNR("\n");
482 }
483#endif
484
485 return true;
486}
487
488// Write bytes to kernel address space for debugger.
489bool
490BaseRemoteGDB::write(Addr vaddr, size_t size, const char *data)
491{
492 static Addr lastaddr = 0;
493 static size_t lastsize = 0;
494
495 if (vaddr < 10) {
496 DPRINTF(GDBWrite, "write: writing memory location zero!\n");
497 vaddr = lastaddr + lastsize;
498 }
499
500 if (DTRACE(GDBWrite)) {
501 DPRINTFN("write: addr=%#x, size=%d", vaddr, size);
502 if (DTRACE(GDBExtra)) {
503 char buf[1024];
504 mem2hex(buf, data, size);
505 DPRINTFNR(": %s\n", buf);
506 } else
507 DPRINTFNR("\n");
508 }
509#if FULL_SYSTEM
510 VirtualPort *port = context->getVirtPort();
511#else
512 TranslatingPort *port = context->getMemPort();
513#endif
514 port->writeBlob(vaddr, (uint8_t*)data, size);
515#if !FULL_SYSTEM
516 delete port;
517#endif
518
519 return true;
520}
521
522PCEventQueue *BaseRemoteGDB::getPcEventQueue()
523{
524 return &system->pcEventQueue;
525}
526
527BaseRemoteGDB::HardBreakpoint::HardBreakpoint(BaseRemoteGDB *_gdb, Addr pc)
528 : PCEvent(_gdb->getPcEventQueue(), "HardBreakpoint Event", pc),
529 gdb(_gdb), refcount(0)
530{
531 DPRINTF(GDBMisc, "creating hardware breakpoint at %#x\n", evpc);
532}
533
534void
535BaseRemoteGDB::HardBreakpoint::process(ThreadContext *tc)
536{
537 DPRINTF(GDBMisc, "handling hardware breakpoint at %#x\n", pc());
538
539 if (tc == gdb->context)
540 gdb->trap(SIGTRAP);
541}
542
543bool
544BaseRemoteGDB::insertSoftBreak(Addr addr, size_t len)
545{
546 if (len != sizeof(TheISA::MachInst))
547 panic("invalid length\n");
548
549 return insertHardBreak(addr, len);
550}
551
552bool
553BaseRemoteGDB::removeSoftBreak(Addr addr, size_t len)
554{
555 if (len != sizeof(MachInst))
556 panic("invalid length\n");
557
558 return removeHardBreak(addr, len);
559}
560
561bool
562BaseRemoteGDB::insertHardBreak(Addr addr, size_t len)
563{
564 if (len != sizeof(MachInst))
565 panic("invalid length\n");
566
567 DPRINTF(GDBMisc, "inserting hardware breakpoint at %#x\n", addr);
568
569 HardBreakpoint *&bkpt = hardBreakMap[addr];
570 if (bkpt == 0)
571 bkpt = new HardBreakpoint(this, addr);
572
573 bkpt->refcount++;
574
575 return true;
576}
577
578bool
579BaseRemoteGDB::removeHardBreak(Addr addr, size_t len)
580{
581 if (len != sizeof(MachInst))
582 panic("invalid length\n");
583
584 DPRINTF(GDBMisc, "removing hardware breakpoint at %#x\n", addr);
585
586 break_iter_t i = hardBreakMap.find(addr);
587 if (i == hardBreakMap.end())
588 return false;
589
590 HardBreakpoint *hbp = (*i).second;
591 if (--hbp->refcount == 0) {
592 delete hbp;
593 hardBreakMap.erase(i);
594 }
595
596 return true;
597}
598
599void
600BaseRemoteGDB::setTempBreakpoint(Addr bkpt)
601{
602 DPRINTF(GDBMisc, "setTempBreakpoint: addr=%#x\n", bkpt);
603 insertHardBreak(bkpt, sizeof(TheISA::MachInst));
604}
605
606void
607BaseRemoteGDB::clearTempBreakpoint(Addr &bkpt)
608{
609 DPRINTF(GDBMisc, "setTempBreakpoint: addr=%#x\n", bkpt);
610 removeHardBreak(bkpt, sizeof(TheISA::MachInst));
611 bkpt = 0;
612}
613
614const char *
615BaseRemoteGDB::break_type(char c)
616{
617 switch(c) {
618 case '0': return "software breakpoint";
619 case '1': return "hardware breakpoint";
620 case '2': return "write watchpoint";
621 case '3': return "read watchpoint";
622 case '4': return "access watchpoint";
623 default: return "unknown breakpoint/watchpoint";
624 }
625}
626
627// This function does all command processing for interfacing to a
628// remote gdb. Note that the error codes are ignored by gdb at
629// present, but might eventually become meaningful. (XXX) It might
630// makes sense to use POSIX errno values, because that is what the
631// gdb/remote.c functions want to return.
632bool
633BaseRemoteGDB::trap(int type)
634{
635 uint64_t val;
636 size_t datalen, len;
637 char data[GDBPacketBufLen + 1];
638 char *buffer;
639 size_t bufferSize;
640 const char *p;
641 char command, subcmd;
642 string var;
643 bool ret;
644
645 if (!attached)
646 return false;
647
648 bufferSize = gdbregs.bytes() * 2 + 256;
649 buffer = (char*)malloc(bufferSize);
650
651 TheISA::PCState pc = context->pcState();
652 DPRINTF(GDBMisc, "trap: PC=%s\n", pc);
653
654 clearSingleStep();
655
656 /*
657 * The first entry to this function is normally through
658 * a breakpoint trap in kgdb_connect(), in which case we
659 * must advance past the breakpoint because gdb will not.
660 *
661 * On the first entry here, we expect that gdb is not yet
662 * listening to us, so just enter the interaction loop.
663 * After the debugger is "active" (connected) it will be
664 * waiting for a "signaled" message from us.
665 */
666 if (!active)
667 active = true;
668 else
669 // Tell remote host that an exception has occurred.
670 snprintf((char *)buffer, bufferSize, "S%02x", type);
671 send(buffer);
672
673 // Stick frame regs into our reg cache.
674 getregs();
675
676 for (;;) {
677 datalen = recv(data, sizeof(data));
678 data[sizeof(data) - 1] = 0; // Sentinel
679 command = data[0];
680 subcmd = 0;
681 p = data + 1;
682 switch (command) {
683
684 case GDBSignal:
685 // if this command came from a running gdb, answer it --
686 // the other guy has no way of knowing if we're in or out
687 // of this loop when he issues a "remote-signal".
688 snprintf((char *)buffer, bufferSize,
689 "S%02x", type);
690 send(buffer);
691 continue;
692
693 case GDBRegR:
694 if (2 * gdbregs.bytes() > bufferSize)
695 panic("buffer too small");
696
697 mem2hex(buffer, gdbregs.regs, gdbregs.bytes());
698 send(buffer);
699 continue;
700
701 case GDBRegW:
702 p = hex2mem(gdbregs.regs, p, gdbregs.bytes());
703 if (p == NULL || *p != '\0')
704 send("E01");
705 else {
706 setregs();
707 send("OK");
708 }
709 continue;
710
711#if 0
712 case GDBSetReg:
713 val = hex2i(&p);
714 if (*p++ != '=') {
715 send("E01");
716 continue;
717 }
718 if (val < 0 && val >= KGDB_NUMREGS) {
719 send("E01");
720 continue;
721 }
722
723 gdbregs.regs[val] = hex2i(&p);
724 setregs();
725 send("OK");
726
727 continue;
728#endif
729
730 case GDBMemR:
731 val = hex2i(&p);
732 if (*p++ != ',') {
733 send("E02");
734 continue;
735 }
736 len = hex2i(&p);
737 if (*p != '\0') {
738 send("E03");
739 continue;
740 }
741 if (len > bufferSize) {
742 send("E04");
743 continue;
744 }
745 if (!acc(val, len)) {
746 send("E05");
747 continue;
748 }
749
750 if (read(val, (size_t)len, (char *)buffer)) {
751 // variable length array would be nice, but C++ doesn't
752 // officially support those...
753 char *temp = new char[2*len+1];
754 mem2hex(temp, buffer, len);
755 send(temp);
756 delete [] temp;
757 } else {
758 send("E05");
759 }
760 continue;
761
762 case GDBMemW:
763 val = hex2i(&p);
764 if (*p++ != ',') {
765 send("E06");
766 continue;
767 }
768 len = hex2i(&p);
769 if (*p++ != ':') {
770 send("E07");
771 continue;
772 }
773 if (len > datalen - (p - data)) {
774 send("E08");
775 continue;
776 }
777 p = hex2mem(buffer, p, bufferSize);
778 if (p == NULL) {
779 send("E09");
780 continue;
781 }
782 if (!acc(val, len)) {
783 send("E0A");
784 continue;
785 }
786 if (write(val, (size_t)len, (char *)buffer))
787 send("OK");
788 else
789 send("E0B");
790 continue;
791
792 case GDBSetThread:
793 subcmd = *p++;
794 val = hex2i(&p);
795 if (val == 0)
796 send("OK");
797 else
798 send("E01");
799 continue;
800
801 case GDBDetach:
802 case GDBKill:
803 active = false;
804 clearSingleStep();
805 detach();
806 goto out;
807
808 case GDBAsyncCont:
809 subcmd = hex2i(&p);
810 if (*p++ == ';') {
811 val = hex2i(&p);
812 context->pcState(val);
813 }
814 clearSingleStep();
815 goto out;
816
817 case GDBCont:
818 if (p - data < (ptrdiff_t)datalen) {
819 val = hex2i(&p);
820 context->pcState(val);
821 }
822 clearSingleStep();
823 goto out;
824
825 case GDBAsyncStep:
826 subcmd = hex2i(&p);
827 if (*p++ == ';') {
828 val = hex2i(&p);
829 context->pcState(val);
830 }
831 setSingleStep();
832 goto out;
833
834 case GDBStep:
835 if (p - data < (ptrdiff_t)datalen) {
836 val = hex2i(&p);
837 context->pcState(val);
838 }
839 setSingleStep();
840 goto out;
841
842 case GDBClrHwBkpt:
843 subcmd = *p++;
844 if (*p++ != ',') send("E0D");
845 val = hex2i(&p);
846 if (*p++ != ',') send("E0D");
847 len = hex2i(&p);
848
849 DPRINTF(GDBMisc, "clear %s, addr=%#x, len=%d\n",
850 break_type(subcmd), val, len);
851
852 ret = false;
853
854 switch (subcmd) {
855 case '0': // software breakpoint
856 ret = removeSoftBreak(val, len);
857 break;
858
859 case '1': // hardware breakpoint
860 ret = removeHardBreak(val, len);
861 break;
862
863 case '2': // write watchpoint
864 case '3': // read watchpoint
865 case '4': // access watchpoint
866 default: // unknown
867 send("");
868 break;
869 }
870
871 send(ret ? "OK" : "E0C");
872 continue;
873
874 case GDBSetHwBkpt:
875 subcmd = *p++;
876 if (*p++ != ',') send("E0D");
877 val = hex2i(&p);
878 if (*p++ != ',') send("E0D");
879 len = hex2i(&p);
880
881 DPRINTF(GDBMisc, "set %s, addr=%#x, len=%d\n",
882 break_type(subcmd), val, len);
883
884 ret = false;
885
886 switch (subcmd) {
887 case '0': // software breakpoint
888 ret = insertSoftBreak(val, len);
889 break;
890
891 case '1': // hardware breakpoint
892 ret = insertHardBreak(val, len);
893 break;
894
895 case '2': // write watchpoint
896 case '3': // read watchpoint
897 case '4': // access watchpoint
898 default: // unknown
899 send("");
900 break;
901 }
902
903 send(ret ? "OK" : "E0C");
904 continue;
905
906 case GDBQueryVar:
907 var = string(p, datalen - 1);
908 if (var == "C")
909 send("QC0");
910 else
911 send("");
912 continue;
913
914 case GDBSetBaud:
915 case GDBSetBreak:
916 case GDBDebug:
917 case GDBCycleStep:
918 case GDBSigCycleStep:
919 case GDBReadReg:
920 case GDBSetVar:
921 case GDBReset:
922 case GDBThreadAlive:
923 case GDBTargetExit:
924 case GDBBinaryDload:
925 // Unsupported command
926 DPRINTF(GDBMisc, "Unsupported command: %s\n",
927 gdb_command(command));
928 DDUMP(GDBMisc, (uint8_t *)data, datalen);
929 send("");
930 continue;
931
932 default:
933 // Unknown command.
934 DPRINTF(GDBMisc, "Unknown command: %c(%#x)\n",
935 command, command);
936 send("");
937 continue;
938
939
940 }
941 }
942
943 out:
944 free(buffer);
945 return true;
946}
947
948// Convert a hex digit into an integer.
949// This returns -1 if the argument passed is no valid hex digit.
950int
951BaseRemoteGDB::digit2i(char c)
952{
953 if (c >= '0' && c <= '9')
954 return (c - '0');
955 else if (c >= 'a' && c <= 'f')
956 return (c - 'a' + 10);
957 else if (c >= 'A' && c <= 'F')
958
959 return (c - 'A' + 10);
960 else
961 return (-1);
962}
963
964// Convert the low 4 bits of an integer into an hex digit.
965char
966BaseRemoteGDB::i2digit(int n)
967{
968 return ("0123456789abcdef"[n & 0x0f]);
969}
970
971// Convert a byte array into an hex string.
972void
973BaseRemoteGDB::mem2hex(void *vdst, const void *vsrc, int len)
974{
975 char *dst = (char *)vdst;
976 const char *src = (const char *)vsrc;
977
978 while (len--) {
979 *dst++ = i2digit(*src >> 4);
980 *dst++ = i2digit(*src++);
981 }
982 *dst = '\0';
983}
984
985// Convert an hex string into a byte array.
986// This returns a pointer to the character following the last valid
987// hex digit. If the string ends in the middle of a byte, NULL is
988// returned.
989const char *
990BaseRemoteGDB::hex2mem(void *vdst, const char *src, int maxlen)
991{
992 char *dst = (char *)vdst;
993 int msb, lsb;
994
995 while (*src && maxlen--) {
996 msb = digit2i(*src++);
997 if (msb < 0)
998 return (src - 1);
999 lsb = digit2i(*src++);
1000 if (lsb < 0)
1001 return (NULL);
1002 *dst++ = (msb << 4) | lsb;
1003 }
1004 return (src);
1005}
1006
1007// Convert an hex string into an integer.
1008// This returns a pointer to the character following the last valid
1009// hex digit.
1010Addr
1011BaseRemoteGDB::hex2i(const char **srcp)
1012{
1013 const char *src = *srcp;
1014 Addr r = 0;
1015 int nibble;
1016
1017 while ((nibble = digit2i(*src)) >= 0) {
1018 r *= 16;
1019 r += nibble;
1020 src++;
1021 }
1022 *srcp = src;
1023 return (r);
1024}
1025
|