1# -*- mode:python -*- 2 3# Copyright (c) 2004-2005 The Regents of The University of Michigan 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions are 8# met: redistributions of source code must retain the above copyright 9# notice, this list of conditions and the following disclaimer; 10# redistributions in binary form must reproduce the above copyright 11# notice, this list of conditions and the following disclaimer in the 12# documentation and/or other materials provided with the distribution; 13# neither the name of the copyright holders nor the names of its 14# contributors may be used to endorse or promote products derived from 15# this software without specific prior written permission. 16# 17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28# 29# Authors: Nathan Binkert 30 31import array 32import bisect 33import imp 34import marshal 35import os 36import re 37import sys 38import zlib 39 40from os.path import basename, dirname, exists, isdir, isfile, join as joinpath 41 42import SCons 43 44# This file defines how to build a particular configuration of gem5 45# based on variable settings in the 'env' build environment. 46 47Import('*') 48 49# Children need to see the environment 50Export('env') 51 52build_env = [(opt, env[opt]) for opt in export_vars] 53 54from m5.util import code_formatter, compareVersions 55 56######################################################################## 57# Code for adding source files of various types 58# 59# When specifying a source file of some type, a set of guards can be 60# specified for that file. When get() is used to find the files, if 61# get specifies a set of filters, only files that match those filters 62# will be accepted (unspecified filters on files are assumed to be 63# false). Current filters are: 64# main -- specifies the gem5 main() function 65# skip_lib -- do not put this file into the gem5 library 66# skip_no_python -- do not put this file into a no_python library 67# as it embeds compiled Python 68# <unittest> -- unit tests use filters based on the unit test name 69# 70# A parent can now be specified for a source file and default filter 71# values will be retrieved recursively from parents (children override 72# parents). 73# 74class SourceMeta(type): 75 '''Meta class for source files that keeps track of all files of a 76 particular type and has a get function for finding all functions 77 of a certain type that match a set of guards''' 78 def __init__(cls, name, bases, dict): 79 super(SourceMeta, cls).__init__(name, bases, dict) 80 cls.all = [] 81 82 def get(cls, **guards): 83 '''Find all files that match the specified guards. If a source 84 file does not specify a flag, the default is False''' 85 for src in cls.all: 86 for flag,value in guards.iteritems(): 87 # if the flag is found and has a different value, skip 88 # this file 89 if src.all_guards.get(flag, False) != value: 90 break 91 else: 92 yield src 93 94class SourceFile(object): 95 '''Base object that encapsulates the notion of a source file. 96 This includes, the source node, target node, various manipulations 97 of those. A source file also specifies a set of guards which 98 describing which builds the source file applies to. A parent can 99 also be specified to get default guards from''' 100 __metaclass__ = SourceMeta 101 def __init__(self, source, parent=None, **guards): 102 self.guards = guards 103 self.parent = parent 104 105 tnode = source 106 if not isinstance(source, SCons.Node.FS.File): 107 tnode = File(source) 108 109 self.tnode = tnode 110 self.snode = tnode.srcnode() 111 112 for base in type(self).__mro__: 113 if issubclass(base, SourceFile): 114 base.all.append(self) 115 116 @property 117 def filename(self): 118 return str(self.tnode) 119 120 @property 121 def dirname(self): 122 return dirname(self.filename) 123 124 @property 125 def basename(self): 126 return basename(self.filename) 127 128 @property 129 def extname(self): 130 index = self.basename.rfind('.') 131 if index <= 0: 132 # dot files aren't extensions 133 return self.basename, None 134 135 return self.basename[:index], self.basename[index+1:] 136 137 @property 138 def all_guards(self): 139 '''find all guards for this object getting default values 140 recursively from its parents''' 141 guards = {} 142 if self.parent: 143 guards.update(self.parent.guards) 144 guards.update(self.guards) 145 return guards 146 147 def __lt__(self, other): return self.filename < other.filename 148 def __le__(self, other): return self.filename <= other.filename 149 def __gt__(self, other): return self.filename > other.filename 150 def __ge__(self, other): return self.filename >= other.filename 151 def __eq__(self, other): return self.filename == other.filename 152 def __ne__(self, other): return self.filename != other.filename 153 154 @staticmethod 155 def done(): 156 def disabled(cls, name, *ignored): 157 raise RuntimeError("Additional SourceFile '%s'" % name,\ 158 "declared, but targets deps are already fixed.") 159 SourceFile.__init__ = disabled 160 161 162class Source(SourceFile): 163 '''Add a c/c++ source file to the build''' 164 def __init__(self, source, Werror=True, swig=False, **guards): 165 '''specify the source file, and any guards''' 166 super(Source, self).__init__(source, **guards) 167 168 self.Werror = Werror 169 self.swig = swig 170 171class PySource(SourceFile): 172 '''Add a python source file to the named package''' 173 invalid_sym_char = re.compile('[^A-z0-9_]') 174 modules = {} 175 tnodes = {} 176 symnames = {} 177 178 def __init__(self, package, source, **guards): 179 '''specify the python package, the source file, and any guards''' 180 super(PySource, self).__init__(source, **guards) 181 182 modname,ext = self.extname 183 assert ext == 'py' 184 185 if package: 186 path = package.split('.') 187 else: 188 path = [] 189 190 modpath = path[:] 191 if modname != '__init__': 192 modpath += [ modname ] 193 modpath = '.'.join(modpath) 194 195 arcpath = path + [ self.basename ] 196 abspath = self.snode.abspath 197 if not exists(abspath): 198 abspath = self.tnode.abspath 199 200 self.package = package 201 self.modname = modname 202 self.modpath = modpath 203 self.arcname = joinpath(*arcpath) 204 self.abspath = abspath 205 self.compiled = File(self.filename + 'c') 206 self.cpp = File(self.filename + '.cc') 207 self.symname = PySource.invalid_sym_char.sub('_', modpath) 208 209 PySource.modules[modpath] = self 210 PySource.tnodes[self.tnode] = self 211 PySource.symnames[self.symname] = self 212 213class SimObject(PySource): 214 '''Add a SimObject python file as a python source object and add 215 it to a list of sim object modules''' 216 217 fixed = False 218 modnames = [] 219 220 def __init__(self, source, **guards): 221 '''Specify the source file and any guards (automatically in 222 the m5.objects package)''' 223 super(SimObject, self).__init__('m5.objects', source, **guards) 224 if self.fixed: 225 raise AttributeError, "Too late to call SimObject now." 226 227 bisect.insort_right(SimObject.modnames, self.modname) 228 229class SwigSource(SourceFile): 230 '''Add a swig file to build''' 231 232 def __init__(self, package, source, **guards): 233 '''Specify the python package, the source file, and any guards''' 234 super(SwigSource, self).__init__(source, skip_no_python=True, **guards) 235 236 modname,ext = self.extname 237 assert ext == 'i' 238
| 1# -*- mode:python -*- 2 3# Copyright (c) 2004-2005 The Regents of The University of Michigan 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions are 8# met: redistributions of source code must retain the above copyright 9# notice, this list of conditions and the following disclaimer; 10# redistributions in binary form must reproduce the above copyright 11# notice, this list of conditions and the following disclaimer in the 12# documentation and/or other materials provided with the distribution; 13# neither the name of the copyright holders nor the names of its 14# contributors may be used to endorse or promote products derived from 15# this software without specific prior written permission. 16# 17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28# 29# Authors: Nathan Binkert 30 31import array 32import bisect 33import imp 34import marshal 35import os 36import re 37import sys 38import zlib 39 40from os.path import basename, dirname, exists, isdir, isfile, join as joinpath 41 42import SCons 43 44# This file defines how to build a particular configuration of gem5 45# based on variable settings in the 'env' build environment. 46 47Import('*') 48 49# Children need to see the environment 50Export('env') 51 52build_env = [(opt, env[opt]) for opt in export_vars] 53 54from m5.util import code_formatter, compareVersions 55 56######################################################################## 57# Code for adding source files of various types 58# 59# When specifying a source file of some type, a set of guards can be 60# specified for that file. When get() is used to find the files, if 61# get specifies a set of filters, only files that match those filters 62# will be accepted (unspecified filters on files are assumed to be 63# false). Current filters are: 64# main -- specifies the gem5 main() function 65# skip_lib -- do not put this file into the gem5 library 66# skip_no_python -- do not put this file into a no_python library 67# as it embeds compiled Python 68# <unittest> -- unit tests use filters based on the unit test name 69# 70# A parent can now be specified for a source file and default filter 71# values will be retrieved recursively from parents (children override 72# parents). 73# 74class SourceMeta(type): 75 '''Meta class for source files that keeps track of all files of a 76 particular type and has a get function for finding all functions 77 of a certain type that match a set of guards''' 78 def __init__(cls, name, bases, dict): 79 super(SourceMeta, cls).__init__(name, bases, dict) 80 cls.all = [] 81 82 def get(cls, **guards): 83 '''Find all files that match the specified guards. If a source 84 file does not specify a flag, the default is False''' 85 for src in cls.all: 86 for flag,value in guards.iteritems(): 87 # if the flag is found and has a different value, skip 88 # this file 89 if src.all_guards.get(flag, False) != value: 90 break 91 else: 92 yield src 93 94class SourceFile(object): 95 '''Base object that encapsulates the notion of a source file. 96 This includes, the source node, target node, various manipulations 97 of those. A source file also specifies a set of guards which 98 describing which builds the source file applies to. A parent can 99 also be specified to get default guards from''' 100 __metaclass__ = SourceMeta 101 def __init__(self, source, parent=None, **guards): 102 self.guards = guards 103 self.parent = parent 104 105 tnode = source 106 if not isinstance(source, SCons.Node.FS.File): 107 tnode = File(source) 108 109 self.tnode = tnode 110 self.snode = tnode.srcnode() 111 112 for base in type(self).__mro__: 113 if issubclass(base, SourceFile): 114 base.all.append(self) 115 116 @property 117 def filename(self): 118 return str(self.tnode) 119 120 @property 121 def dirname(self): 122 return dirname(self.filename) 123 124 @property 125 def basename(self): 126 return basename(self.filename) 127 128 @property 129 def extname(self): 130 index = self.basename.rfind('.') 131 if index <= 0: 132 # dot files aren't extensions 133 return self.basename, None 134 135 return self.basename[:index], self.basename[index+1:] 136 137 @property 138 def all_guards(self): 139 '''find all guards for this object getting default values 140 recursively from its parents''' 141 guards = {} 142 if self.parent: 143 guards.update(self.parent.guards) 144 guards.update(self.guards) 145 return guards 146 147 def __lt__(self, other): return self.filename < other.filename 148 def __le__(self, other): return self.filename <= other.filename 149 def __gt__(self, other): return self.filename > other.filename 150 def __ge__(self, other): return self.filename >= other.filename 151 def __eq__(self, other): return self.filename == other.filename 152 def __ne__(self, other): return self.filename != other.filename 153 154 @staticmethod 155 def done(): 156 def disabled(cls, name, *ignored): 157 raise RuntimeError("Additional SourceFile '%s'" % name,\ 158 "declared, but targets deps are already fixed.") 159 SourceFile.__init__ = disabled 160 161 162class Source(SourceFile): 163 '''Add a c/c++ source file to the build''' 164 def __init__(self, source, Werror=True, swig=False, **guards): 165 '''specify the source file, and any guards''' 166 super(Source, self).__init__(source, **guards) 167 168 self.Werror = Werror 169 self.swig = swig 170 171class PySource(SourceFile): 172 '''Add a python source file to the named package''' 173 invalid_sym_char = re.compile('[^A-z0-9_]') 174 modules = {} 175 tnodes = {} 176 symnames = {} 177 178 def __init__(self, package, source, **guards): 179 '''specify the python package, the source file, and any guards''' 180 super(PySource, self).__init__(source, **guards) 181 182 modname,ext = self.extname 183 assert ext == 'py' 184 185 if package: 186 path = package.split('.') 187 else: 188 path = [] 189 190 modpath = path[:] 191 if modname != '__init__': 192 modpath += [ modname ] 193 modpath = '.'.join(modpath) 194 195 arcpath = path + [ self.basename ] 196 abspath = self.snode.abspath 197 if not exists(abspath): 198 abspath = self.tnode.abspath 199 200 self.package = package 201 self.modname = modname 202 self.modpath = modpath 203 self.arcname = joinpath(*arcpath) 204 self.abspath = abspath 205 self.compiled = File(self.filename + 'c') 206 self.cpp = File(self.filename + '.cc') 207 self.symname = PySource.invalid_sym_char.sub('_', modpath) 208 209 PySource.modules[modpath] = self 210 PySource.tnodes[self.tnode] = self 211 PySource.symnames[self.symname] = self 212 213class SimObject(PySource): 214 '''Add a SimObject python file as a python source object and add 215 it to a list of sim object modules''' 216 217 fixed = False 218 modnames = [] 219 220 def __init__(self, source, **guards): 221 '''Specify the source file and any guards (automatically in 222 the m5.objects package)''' 223 super(SimObject, self).__init__('m5.objects', source, **guards) 224 if self.fixed: 225 raise AttributeError, "Too late to call SimObject now." 226 227 bisect.insort_right(SimObject.modnames, self.modname) 228 229class SwigSource(SourceFile): 230 '''Add a swig file to build''' 231 232 def __init__(self, package, source, **guards): 233 '''Specify the python package, the source file, and any guards''' 234 super(SwigSource, self).__init__(source, skip_no_python=True, **guards) 235 236 modname,ext = self.extname 237 assert ext == 'i' 238
|
| 239 self.package = package
|
239 self.module = modname 240 cc_file = joinpath(self.dirname, modname + '_wrap.cc') 241 py_file = joinpath(self.dirname, modname + '.py') 242 243 self.cc_source = Source(cc_file, swig=True, parent=self, **guards) 244 self.py_source = PySource(package, py_file, parent=self, **guards) 245 246class ProtoBuf(SourceFile): 247 '''Add a Protocol Buffer to build''' 248 249 def __init__(self, source, **guards): 250 '''Specify the source file, and any guards''' 251 super(ProtoBuf, self).__init__(source, **guards) 252 253 # Get the file name and the extension 254 modname,ext = self.extname 255 assert ext == 'proto' 256 257 # Currently, we stick to generating the C++ headers, so we 258 # only need to track the source and header. 259 self.cc_file = File(modname + '.pb.cc') 260 self.hh_file = File(modname + '.pb.h') 261 262class UnitTest(object): 263 '''Create a UnitTest''' 264 265 all = [] 266 def __init__(self, target, *sources, **kwargs): 267 '''Specify the target name and any sources. Sources that are 268 not SourceFiles are evalued with Source(). All files are 269 guarded with a guard of the same name as the UnitTest 270 target.''' 271 272 srcs = [] 273 for src in sources: 274 if not isinstance(src, SourceFile): 275 src = Source(src, skip_lib=True) 276 src.guards[target] = True 277 srcs.append(src) 278 279 self.sources = srcs 280 self.target = target 281 self.main = kwargs.get('main', False) 282 UnitTest.all.append(self) 283 284# Children should have access 285Export('Source') 286Export('PySource') 287Export('SimObject') 288Export('SwigSource') 289Export('ProtoBuf') 290Export('UnitTest') 291 292######################################################################## 293# 294# Debug Flags 295# 296debug_flags = {} 297def DebugFlag(name, desc=None): 298 if name in debug_flags: 299 raise AttributeError, "Flag %s already specified" % name 300 debug_flags[name] = (name, (), desc) 301 302def CompoundFlag(name, flags, desc=None): 303 if name in debug_flags: 304 raise AttributeError, "Flag %s already specified" % name 305 306 compound = tuple(flags) 307 debug_flags[name] = (name, compound, desc) 308 309Export('DebugFlag') 310Export('CompoundFlag') 311 312######################################################################## 313# 314# Set some compiler variables 315# 316 317# Include file paths are rooted in this directory. SCons will 318# automatically expand '.' to refer to both the source directory and 319# the corresponding build directory to pick up generated include 320# files. 321env.Append(CPPPATH=Dir('.')) 322 323for extra_dir in extras_dir_list: 324 env.Append(CPPPATH=Dir(extra_dir)) 325 326# Workaround for bug in SCons version > 0.97d20071212 327# Scons bug id: 2006 gem5 Bug id: 308 328for root, dirs, files in os.walk(base_dir, topdown=True): 329 Dir(root[len(base_dir) + 1:]) 330 331######################################################################## 332# 333# Walk the tree and execute all SConscripts in subdirectories 334# 335 336here = Dir('.').srcnode().abspath 337for root, dirs, files in os.walk(base_dir, topdown=True): 338 if root == here: 339 # we don't want to recurse back into this SConscript 340 continue 341 342 if 'SConscript' in files: 343 build_dir = joinpath(env['BUILDDIR'], root[len(base_dir) + 1:]) 344 SConscript(joinpath(root, 'SConscript'), variant_dir=build_dir) 345 346for extra_dir in extras_dir_list: 347 prefix_len = len(dirname(extra_dir)) + 1 348 349 # Also add the corresponding build directory to pick up generated 350 # include files. 351 env.Append(CPPPATH=Dir(joinpath(env['BUILDDIR'], extra_dir[prefix_len:]))) 352 353 for root, dirs, files in os.walk(extra_dir, topdown=True): 354 # if build lives in the extras directory, don't walk down it 355 if 'build' in dirs: 356 dirs.remove('build') 357 358 if 'SConscript' in files: 359 build_dir = joinpath(env['BUILDDIR'], root[prefix_len:]) 360 SConscript(joinpath(root, 'SConscript'), variant_dir=build_dir) 361 362for opt in export_vars: 363 env.ConfigFile(opt) 364 365def makeTheISA(source, target, env): 366 isas = [ src.get_contents() for src in source ] 367 target_isa = env['TARGET_ISA'] 368 def define(isa): 369 return isa.upper() + '_ISA' 370 371 def namespace(isa): 372 return isa[0].upper() + isa[1:].lower() + 'ISA' 373 374 375 code = code_formatter() 376 code('''\ 377#ifndef __CONFIG_THE_ISA_HH__ 378#define __CONFIG_THE_ISA_HH__ 379 380''') 381 382 # create defines for the preprocessing and compile-time determination 383 for i,isa in enumerate(isas): 384 code('#define $0 $1', define(isa), i + 1) 385 code() 386 387 # create an enum for any run-time determination of the ISA, we 388 # reuse the same name as the namespaces 389 code('enum class Arch {') 390 for i,isa in enumerate(isas): 391 if i + 1 == len(isas): 392 code(' $0 = $1', namespace(isa), define(isa)) 393 else: 394 code(' $0 = $1,', namespace(isa), define(isa)) 395 code('};') 396 397 code(''' 398 399#define THE_ISA ${{define(target_isa)}} 400#define TheISA ${{namespace(target_isa)}} 401#define THE_ISA_STR "${{target_isa}}" 402 403#endif // __CONFIG_THE_ISA_HH__''') 404 405 code.write(str(target[0])) 406 407env.Command('config/the_isa.hh', map(Value, all_isa_list), 408 MakeAction(makeTheISA, Transform("CFG ISA", 0))) 409 410def makeTheGPUISA(source, target, env): 411 isas = [ src.get_contents() for src in source ] 412 target_gpu_isa = env['TARGET_GPU_ISA'] 413 def define(isa): 414 return isa.upper() + '_ISA' 415 416 def namespace(isa): 417 return isa[0].upper() + isa[1:].lower() + 'ISA' 418 419 420 code = code_formatter() 421 code('''\ 422#ifndef __CONFIG_THE_GPU_ISA_HH__ 423#define __CONFIG_THE_GPU_ISA_HH__ 424 425''') 426 427 # create defines for the preprocessing and compile-time determination 428 for i,isa in enumerate(isas): 429 code('#define $0 $1', define(isa), i + 1) 430 code() 431 432 # create an enum for any run-time determination of the ISA, we 433 # reuse the same name as the namespaces 434 code('enum class GPUArch {') 435 for i,isa in enumerate(isas): 436 if i + 1 == len(isas): 437 code(' $0 = $1', namespace(isa), define(isa)) 438 else: 439 code(' $0 = $1,', namespace(isa), define(isa)) 440 code('};') 441 442 code(''' 443 444#define THE_GPU_ISA ${{define(target_gpu_isa)}} 445#define TheGpuISA ${{namespace(target_gpu_isa)}} 446#define THE_GPU_ISA_STR "${{target_gpu_isa}}" 447 448#endif // __CONFIG_THE_GPU_ISA_HH__''') 449 450 code.write(str(target[0])) 451 452env.Command('config/the_gpu_isa.hh', map(Value, all_gpu_isa_list), 453 MakeAction(makeTheGPUISA, Transform("CFG ISA", 0))) 454 455######################################################################## 456# 457# Prevent any SimObjects from being added after this point, they 458# should all have been added in the SConscripts above 459# 460SimObject.fixed = True 461 462class DictImporter(object): 463 '''This importer takes a dictionary of arbitrary module names that 464 map to arbitrary filenames.''' 465 def __init__(self, modules): 466 self.modules = modules 467 self.installed = set() 468 469 def __del__(self): 470 self.unload() 471 472 def unload(self): 473 import sys 474 for module in self.installed: 475 del sys.modules[module] 476 self.installed = set() 477 478 def find_module(self, fullname, path): 479 if fullname == 'm5.defines': 480 return self 481 482 if fullname == 'm5.objects': 483 return self 484 485 if fullname.startswith('m5.internal'): 486 return None 487 488 source = self.modules.get(fullname, None) 489 if source is not None and fullname.startswith('m5.objects'): 490 return self 491 492 return None 493 494 def load_module(self, fullname): 495 mod = imp.new_module(fullname) 496 sys.modules[fullname] = mod 497 self.installed.add(fullname) 498 499 mod.__loader__ = self 500 if fullname == 'm5.objects': 501 mod.__path__ = fullname.split('.') 502 return mod 503 504 if fullname == 'm5.defines': 505 mod.__dict__['buildEnv'] = m5.util.SmartDict(build_env) 506 return mod 507 508 source = self.modules[fullname] 509 if source.modname == '__init__': 510 mod.__path__ = source.modpath 511 mod.__file__ = source.abspath 512 513 exec file(source.abspath, 'r') in mod.__dict__ 514 515 return mod 516 517import m5.SimObject 518import m5.params 519from m5.util import code_formatter 520 521m5.SimObject.clear() 522m5.params.clear() 523 524# install the python importer so we can grab stuff from the source 525# tree itself. We can't have SimObjects added after this point or 526# else we won't know about them for the rest of the stuff. 527importer = DictImporter(PySource.modules) 528sys.meta_path[0:0] = [ importer ] 529 530# import all sim objects so we can populate the all_objects list 531# make sure that we're working with a list, then let's sort it 532for modname in SimObject.modnames: 533 exec('from m5.objects import %s' % modname) 534 535# we need to unload all of the currently imported modules so that they 536# will be re-imported the next time the sconscript is run 537importer.unload() 538sys.meta_path.remove(importer) 539 540sim_objects = m5.SimObject.allClasses 541all_enums = m5.params.allEnums 542 543if m5.SimObject.noCxxHeader: 544 print >> sys.stderr, \ 545 "warning: At least one SimObject lacks a header specification. " \ 546 "This can cause unexpected results in the generated SWIG " \ 547 "wrappers." 548 549# Find param types that need to be explicitly wrapped with swig. 550# These will be recognized because the ParamDesc will have a 551# swig_decl() method. Most param types are based on types that don't 552# need this, either because they're based on native types (like Int) 553# or because they're SimObjects (which get swigged independently). 554# For now the only things handled here are VectorParam types. 555params_to_swig = {} 556for name,obj in sorted(sim_objects.iteritems()): 557 for param in obj._params.local.values(): 558 # load the ptype attribute now because it depends on the 559 # current version of SimObject.allClasses, but when scons 560 # actually uses the value, all versions of 561 # SimObject.allClasses will have been loaded 562 param.ptype 563 564 if not hasattr(param, 'swig_decl'): 565 continue 566 pname = param.ptype_str 567 if pname not in params_to_swig: 568 params_to_swig[pname] = param 569 570######################################################################## 571# 572# calculate extra dependencies 573# 574module_depends = ["m5", "m5.SimObject", "m5.params"] 575depends = [ PySource.modules[dep].snode for dep in module_depends ] 576depends.sort(key = lambda x: x.name) 577 578######################################################################## 579# 580# Commands for the basic automatically generated python files 581# 582 583# Generate Python file containing a dict specifying the current 584# buildEnv flags. 585def makeDefinesPyFile(target, source, env): 586 build_env = source[0].get_contents() 587 588 code = code_formatter() 589 code(""" 590import m5.internal 591import m5.util 592 593buildEnv = m5.util.SmartDict($build_env) 594 595compileDate = m5.internal.core.compileDate 596_globals = globals() 597for key,val in m5.internal.core.__dict__.iteritems(): 598 if key.startswith('flag_'): 599 flag = key[5:] 600 _globals[flag] = val 601del _globals 602""") 603 code.write(target[0].abspath) 604 605defines_info = Value(build_env) 606# Generate a file with all of the compile options in it 607env.Command('python/m5/defines.py', defines_info, 608 MakeAction(makeDefinesPyFile, Transform("DEFINES", 0))) 609PySource('m5', 'python/m5/defines.py') 610 611# Generate python file containing info about the M5 source code 612def makeInfoPyFile(target, source, env): 613 code = code_formatter() 614 for src in source: 615 data = ''.join(file(src.srcnode().abspath, 'r').xreadlines()) 616 code('$src = ${{repr(data)}}') 617 code.write(str(target[0])) 618 619# Generate a file that wraps the basic top level files 620env.Command('python/m5/info.py', 621 [ '#/COPYING', '#/LICENSE', '#/README', ], 622 MakeAction(makeInfoPyFile, Transform("INFO"))) 623PySource('m5', 'python/m5/info.py') 624 625######################################################################## 626# 627# Create all of the SimObject param headers and enum headers 628# 629 630def createSimObjectParamStruct(target, source, env): 631 assert len(target) == 1 and len(source) == 1 632 633 name = str(source[0].get_contents()) 634 obj = sim_objects[name] 635 636 code = code_formatter() 637 obj.cxx_param_decl(code) 638 code.write(target[0].abspath) 639 640def createSimObjectCxxConfig(is_header): 641 def body(target, source, env): 642 assert len(target) == 1 and len(source) == 1 643 644 name = str(source[0].get_contents()) 645 obj = sim_objects[name] 646 647 code = code_formatter() 648 obj.cxx_config_param_file(code, is_header) 649 code.write(target[0].abspath) 650 return body 651 652def createParamSwigWrapper(target, source, env): 653 assert len(target) == 1 and len(source) == 1 654 655 name = str(source[0].get_contents()) 656 param = params_to_swig[name] 657 658 code = code_formatter() 659 param.swig_decl(code) 660 code.write(target[0].abspath) 661 662def createEnumStrings(target, source, env): 663 assert len(target) == 1 and len(source) == 1 664 665 name = str(source[0].get_contents()) 666 obj = all_enums[name] 667 668 code = code_formatter() 669 obj.cxx_def(code) 670 code.write(target[0].abspath) 671 672def createEnumDecls(target, source, env): 673 assert len(target) == 1 and len(source) == 1 674 675 name = str(source[0].get_contents()) 676 obj = all_enums[name] 677 678 code = code_formatter() 679 obj.cxx_decl(code) 680 code.write(target[0].abspath) 681 682def createEnumSwigWrapper(target, source, env): 683 assert len(target) == 1 and len(source) == 1 684 685 name = str(source[0].get_contents()) 686 obj = all_enums[name] 687 688 code = code_formatter() 689 obj.swig_decl(code) 690 code.write(target[0].abspath) 691 692def createSimObjectSwigWrapper(target, source, env): 693 name = source[0].get_contents() 694 obj = sim_objects[name] 695 696 code = code_formatter() 697 obj.swig_decl(code) 698 code.write(target[0].abspath) 699 700# dummy target for generated code 701# we start out with all the Source files so they get copied to build/*/ also. 702SWIG = env.Dummy('swig', [s.tnode for s in Source.get()]) 703 704# Generate all of the SimObject param C++ struct header files 705params_hh_files = [] 706for name,simobj in sorted(sim_objects.iteritems()): 707 py_source = PySource.modules[simobj.__module__] 708 extra_deps = [ py_source.tnode ] 709 710 hh_file = File('params/%s.hh' % name) 711 params_hh_files.append(hh_file) 712 env.Command(hh_file, Value(name), 713 MakeAction(createSimObjectParamStruct, Transform("SO PARAM"))) 714 env.Depends(hh_file, depends + extra_deps) 715 env.Depends(SWIG, hh_file) 716 717# C++ parameter description files 718if GetOption('with_cxx_config'): 719 for name,simobj in sorted(sim_objects.iteritems()): 720 py_source = PySource.modules[simobj.__module__] 721 extra_deps = [ py_source.tnode ] 722 723 cxx_config_hh_file = File('cxx_config/%s.hh' % name) 724 cxx_config_cc_file = File('cxx_config/%s.cc' % name) 725 env.Command(cxx_config_hh_file, Value(name), 726 MakeAction(createSimObjectCxxConfig(True), 727 Transform("CXXCPRHH"))) 728 env.Command(cxx_config_cc_file, Value(name), 729 MakeAction(createSimObjectCxxConfig(False), 730 Transform("CXXCPRCC"))) 731 env.Depends(cxx_config_hh_file, depends + extra_deps + 732 [File('params/%s.hh' % name), File('sim/cxx_config.hh')]) 733 env.Depends(cxx_config_cc_file, depends + extra_deps + 734 [cxx_config_hh_file]) 735 Source(cxx_config_cc_file) 736 737 cxx_config_init_cc_file = File('cxx_config/init.cc') 738 739 def createCxxConfigInitCC(target, source, env): 740 assert len(target) == 1 and len(source) == 1 741 742 code = code_formatter() 743 744 for name,simobj in sorted(sim_objects.iteritems()): 745 if not hasattr(simobj, 'abstract') or not simobj.abstract: 746 code('#include "cxx_config/${name}.hh"') 747 code() 748 code('void cxxConfigInit()') 749 code('{') 750 code.indent() 751 for name,simobj in sorted(sim_objects.iteritems()): 752 not_abstract = not hasattr(simobj, 'abstract') or \ 753 not simobj.abstract 754 if not_abstract and 'type' in simobj.__dict__: 755 code('cxx_config_directory["${name}"] = ' 756 '${name}CxxConfigParams::makeDirectoryEntry();') 757 code.dedent() 758 code('}') 759 code.write(target[0].abspath) 760 761 py_source = PySource.modules[simobj.__module__] 762 extra_deps = [ py_source.tnode ] 763 env.Command(cxx_config_init_cc_file, Value(name), 764 MakeAction(createCxxConfigInitCC, Transform("CXXCINIT"))) 765 cxx_param_hh_files = ["cxx_config/%s.hh" % simobj 766 for name,simobj in sorted(sim_objects.iteritems()) 767 if not hasattr(simobj, 'abstract') or not simobj.abstract] 768 Depends(cxx_config_init_cc_file, cxx_param_hh_files + 769 [File('sim/cxx_config.hh')]) 770 Source(cxx_config_init_cc_file) 771 772# Generate any needed param SWIG wrapper files 773params_i_files = [] 774for name,param in sorted(params_to_swig.iteritems()): 775 i_file = File('python/m5/internal/%s.i' % (param.swig_module_name())) 776 params_i_files.append(i_file) 777 env.Command(i_file, Value(name), 778 MakeAction(createParamSwigWrapper, Transform("SW PARAM"))) 779 env.Depends(i_file, depends) 780 env.Depends(SWIG, i_file) 781 SwigSource('m5.internal', i_file) 782 783# Generate all enum header files 784for name,enum in sorted(all_enums.iteritems()): 785 py_source = PySource.modules[enum.__module__] 786 extra_deps = [ py_source.tnode ] 787 788 cc_file = File('enums/%s.cc' % name) 789 env.Command(cc_file, Value(name), 790 MakeAction(createEnumStrings, Transform("ENUM STR"))) 791 env.Depends(cc_file, depends + extra_deps) 792 env.Depends(SWIG, cc_file) 793 Source(cc_file) 794 795 hh_file = File('enums/%s.hh' % name) 796 env.Command(hh_file, Value(name), 797 MakeAction(createEnumDecls, Transform("ENUMDECL"))) 798 env.Depends(hh_file, depends + extra_deps) 799 env.Depends(SWIG, hh_file) 800 801 i_file = File('python/m5/internal/enum_%s.i' % name) 802 env.Command(i_file, Value(name), 803 MakeAction(createEnumSwigWrapper, Transform("ENUMSWIG"))) 804 env.Depends(i_file, depends + extra_deps) 805 env.Depends(SWIG, i_file) 806 SwigSource('m5.internal', i_file) 807 808# Generate SimObject SWIG wrapper files 809for name,simobj in sorted(sim_objects.iteritems()): 810 py_source = PySource.modules[simobj.__module__] 811 extra_deps = [ py_source.tnode ] 812 i_file = File('python/m5/internal/param_%s.i' % name) 813 env.Command(i_file, Value(name), 814 MakeAction(createSimObjectSwigWrapper, Transform("SO SWIG"))) 815 env.Depends(i_file, depends + extra_deps) 816 SwigSource('m5.internal', i_file) 817 818# Generate the main swig init file
| 240 self.module = modname 241 cc_file = joinpath(self.dirname, modname + '_wrap.cc') 242 py_file = joinpath(self.dirname, modname + '.py') 243 244 self.cc_source = Source(cc_file, swig=True, parent=self, **guards) 245 self.py_source = PySource(package, py_file, parent=self, **guards) 246 247class ProtoBuf(SourceFile): 248 '''Add a Protocol Buffer to build''' 249 250 def __init__(self, source, **guards): 251 '''Specify the source file, and any guards''' 252 super(ProtoBuf, self).__init__(source, **guards) 253 254 # Get the file name and the extension 255 modname,ext = self.extname 256 assert ext == 'proto' 257 258 # Currently, we stick to generating the C++ headers, so we 259 # only need to track the source and header. 260 self.cc_file = File(modname + '.pb.cc') 261 self.hh_file = File(modname + '.pb.h') 262 263class UnitTest(object): 264 '''Create a UnitTest''' 265 266 all = [] 267 def __init__(self, target, *sources, **kwargs): 268 '''Specify the target name and any sources. Sources that are 269 not SourceFiles are evalued with Source(). All files are 270 guarded with a guard of the same name as the UnitTest 271 target.''' 272 273 srcs = [] 274 for src in sources: 275 if not isinstance(src, SourceFile): 276 src = Source(src, skip_lib=True) 277 src.guards[target] = True 278 srcs.append(src) 279 280 self.sources = srcs 281 self.target = target 282 self.main = kwargs.get('main', False) 283 UnitTest.all.append(self) 284 285# Children should have access 286Export('Source') 287Export('PySource') 288Export('SimObject') 289Export('SwigSource') 290Export('ProtoBuf') 291Export('UnitTest') 292 293######################################################################## 294# 295# Debug Flags 296# 297debug_flags = {} 298def DebugFlag(name, desc=None): 299 if name in debug_flags: 300 raise AttributeError, "Flag %s already specified" % name 301 debug_flags[name] = (name, (), desc) 302 303def CompoundFlag(name, flags, desc=None): 304 if name in debug_flags: 305 raise AttributeError, "Flag %s already specified" % name 306 307 compound = tuple(flags) 308 debug_flags[name] = (name, compound, desc) 309 310Export('DebugFlag') 311Export('CompoundFlag') 312 313######################################################################## 314# 315# Set some compiler variables 316# 317 318# Include file paths are rooted in this directory. SCons will 319# automatically expand '.' to refer to both the source directory and 320# the corresponding build directory to pick up generated include 321# files. 322env.Append(CPPPATH=Dir('.')) 323 324for extra_dir in extras_dir_list: 325 env.Append(CPPPATH=Dir(extra_dir)) 326 327# Workaround for bug in SCons version > 0.97d20071212 328# Scons bug id: 2006 gem5 Bug id: 308 329for root, dirs, files in os.walk(base_dir, topdown=True): 330 Dir(root[len(base_dir) + 1:]) 331 332######################################################################## 333# 334# Walk the tree and execute all SConscripts in subdirectories 335# 336 337here = Dir('.').srcnode().abspath 338for root, dirs, files in os.walk(base_dir, topdown=True): 339 if root == here: 340 # we don't want to recurse back into this SConscript 341 continue 342 343 if 'SConscript' in files: 344 build_dir = joinpath(env['BUILDDIR'], root[len(base_dir) + 1:]) 345 SConscript(joinpath(root, 'SConscript'), variant_dir=build_dir) 346 347for extra_dir in extras_dir_list: 348 prefix_len = len(dirname(extra_dir)) + 1 349 350 # Also add the corresponding build directory to pick up generated 351 # include files. 352 env.Append(CPPPATH=Dir(joinpath(env['BUILDDIR'], extra_dir[prefix_len:]))) 353 354 for root, dirs, files in os.walk(extra_dir, topdown=True): 355 # if build lives in the extras directory, don't walk down it 356 if 'build' in dirs: 357 dirs.remove('build') 358 359 if 'SConscript' in files: 360 build_dir = joinpath(env['BUILDDIR'], root[prefix_len:]) 361 SConscript(joinpath(root, 'SConscript'), variant_dir=build_dir) 362 363for opt in export_vars: 364 env.ConfigFile(opt) 365 366def makeTheISA(source, target, env): 367 isas = [ src.get_contents() for src in source ] 368 target_isa = env['TARGET_ISA'] 369 def define(isa): 370 return isa.upper() + '_ISA' 371 372 def namespace(isa): 373 return isa[0].upper() + isa[1:].lower() + 'ISA' 374 375 376 code = code_formatter() 377 code('''\ 378#ifndef __CONFIG_THE_ISA_HH__ 379#define __CONFIG_THE_ISA_HH__ 380 381''') 382 383 # create defines for the preprocessing and compile-time determination 384 for i,isa in enumerate(isas): 385 code('#define $0 $1', define(isa), i + 1) 386 code() 387 388 # create an enum for any run-time determination of the ISA, we 389 # reuse the same name as the namespaces 390 code('enum class Arch {') 391 for i,isa in enumerate(isas): 392 if i + 1 == len(isas): 393 code(' $0 = $1', namespace(isa), define(isa)) 394 else: 395 code(' $0 = $1,', namespace(isa), define(isa)) 396 code('};') 397 398 code(''' 399 400#define THE_ISA ${{define(target_isa)}} 401#define TheISA ${{namespace(target_isa)}} 402#define THE_ISA_STR "${{target_isa}}" 403 404#endif // __CONFIG_THE_ISA_HH__''') 405 406 code.write(str(target[0])) 407 408env.Command('config/the_isa.hh', map(Value, all_isa_list), 409 MakeAction(makeTheISA, Transform("CFG ISA", 0))) 410 411def makeTheGPUISA(source, target, env): 412 isas = [ src.get_contents() for src in source ] 413 target_gpu_isa = env['TARGET_GPU_ISA'] 414 def define(isa): 415 return isa.upper() + '_ISA' 416 417 def namespace(isa): 418 return isa[0].upper() + isa[1:].lower() + 'ISA' 419 420 421 code = code_formatter() 422 code('''\ 423#ifndef __CONFIG_THE_GPU_ISA_HH__ 424#define __CONFIG_THE_GPU_ISA_HH__ 425 426''') 427 428 # create defines for the preprocessing and compile-time determination 429 for i,isa in enumerate(isas): 430 code('#define $0 $1', define(isa), i + 1) 431 code() 432 433 # create an enum for any run-time determination of the ISA, we 434 # reuse the same name as the namespaces 435 code('enum class GPUArch {') 436 for i,isa in enumerate(isas): 437 if i + 1 == len(isas): 438 code(' $0 = $1', namespace(isa), define(isa)) 439 else: 440 code(' $0 = $1,', namespace(isa), define(isa)) 441 code('};') 442 443 code(''' 444 445#define THE_GPU_ISA ${{define(target_gpu_isa)}} 446#define TheGpuISA ${{namespace(target_gpu_isa)}} 447#define THE_GPU_ISA_STR "${{target_gpu_isa}}" 448 449#endif // __CONFIG_THE_GPU_ISA_HH__''') 450 451 code.write(str(target[0])) 452 453env.Command('config/the_gpu_isa.hh', map(Value, all_gpu_isa_list), 454 MakeAction(makeTheGPUISA, Transform("CFG ISA", 0))) 455 456######################################################################## 457# 458# Prevent any SimObjects from being added after this point, they 459# should all have been added in the SConscripts above 460# 461SimObject.fixed = True 462 463class DictImporter(object): 464 '''This importer takes a dictionary of arbitrary module names that 465 map to arbitrary filenames.''' 466 def __init__(self, modules): 467 self.modules = modules 468 self.installed = set() 469 470 def __del__(self): 471 self.unload() 472 473 def unload(self): 474 import sys 475 for module in self.installed: 476 del sys.modules[module] 477 self.installed = set() 478 479 def find_module(self, fullname, path): 480 if fullname == 'm5.defines': 481 return self 482 483 if fullname == 'm5.objects': 484 return self 485 486 if fullname.startswith('m5.internal'): 487 return None 488 489 source = self.modules.get(fullname, None) 490 if source is not None and fullname.startswith('m5.objects'): 491 return self 492 493 return None 494 495 def load_module(self, fullname): 496 mod = imp.new_module(fullname) 497 sys.modules[fullname] = mod 498 self.installed.add(fullname) 499 500 mod.__loader__ = self 501 if fullname == 'm5.objects': 502 mod.__path__ = fullname.split('.') 503 return mod 504 505 if fullname == 'm5.defines': 506 mod.__dict__['buildEnv'] = m5.util.SmartDict(build_env) 507 return mod 508 509 source = self.modules[fullname] 510 if source.modname == '__init__': 511 mod.__path__ = source.modpath 512 mod.__file__ = source.abspath 513 514 exec file(source.abspath, 'r') in mod.__dict__ 515 516 return mod 517 518import m5.SimObject 519import m5.params 520from m5.util import code_formatter 521 522m5.SimObject.clear() 523m5.params.clear() 524 525# install the python importer so we can grab stuff from the source 526# tree itself. We can't have SimObjects added after this point or 527# else we won't know about them for the rest of the stuff. 528importer = DictImporter(PySource.modules) 529sys.meta_path[0:0] = [ importer ] 530 531# import all sim objects so we can populate the all_objects list 532# make sure that we're working with a list, then let's sort it 533for modname in SimObject.modnames: 534 exec('from m5.objects import %s' % modname) 535 536# we need to unload all of the currently imported modules so that they 537# will be re-imported the next time the sconscript is run 538importer.unload() 539sys.meta_path.remove(importer) 540 541sim_objects = m5.SimObject.allClasses 542all_enums = m5.params.allEnums 543 544if m5.SimObject.noCxxHeader: 545 print >> sys.stderr, \ 546 "warning: At least one SimObject lacks a header specification. " \ 547 "This can cause unexpected results in the generated SWIG " \ 548 "wrappers." 549 550# Find param types that need to be explicitly wrapped with swig. 551# These will be recognized because the ParamDesc will have a 552# swig_decl() method. Most param types are based on types that don't 553# need this, either because they're based on native types (like Int) 554# or because they're SimObjects (which get swigged independently). 555# For now the only things handled here are VectorParam types. 556params_to_swig = {} 557for name,obj in sorted(sim_objects.iteritems()): 558 for param in obj._params.local.values(): 559 # load the ptype attribute now because it depends on the 560 # current version of SimObject.allClasses, but when scons 561 # actually uses the value, all versions of 562 # SimObject.allClasses will have been loaded 563 param.ptype 564 565 if not hasattr(param, 'swig_decl'): 566 continue 567 pname = param.ptype_str 568 if pname not in params_to_swig: 569 params_to_swig[pname] = param 570 571######################################################################## 572# 573# calculate extra dependencies 574# 575module_depends = ["m5", "m5.SimObject", "m5.params"] 576depends = [ PySource.modules[dep].snode for dep in module_depends ] 577depends.sort(key = lambda x: x.name) 578 579######################################################################## 580# 581# Commands for the basic automatically generated python files 582# 583 584# Generate Python file containing a dict specifying the current 585# buildEnv flags. 586def makeDefinesPyFile(target, source, env): 587 build_env = source[0].get_contents() 588 589 code = code_formatter() 590 code(""" 591import m5.internal 592import m5.util 593 594buildEnv = m5.util.SmartDict($build_env) 595 596compileDate = m5.internal.core.compileDate 597_globals = globals() 598for key,val in m5.internal.core.__dict__.iteritems(): 599 if key.startswith('flag_'): 600 flag = key[5:] 601 _globals[flag] = val 602del _globals 603""") 604 code.write(target[0].abspath) 605 606defines_info = Value(build_env) 607# Generate a file with all of the compile options in it 608env.Command('python/m5/defines.py', defines_info, 609 MakeAction(makeDefinesPyFile, Transform("DEFINES", 0))) 610PySource('m5', 'python/m5/defines.py') 611 612# Generate python file containing info about the M5 source code 613def makeInfoPyFile(target, source, env): 614 code = code_formatter() 615 for src in source: 616 data = ''.join(file(src.srcnode().abspath, 'r').xreadlines()) 617 code('$src = ${{repr(data)}}') 618 code.write(str(target[0])) 619 620# Generate a file that wraps the basic top level files 621env.Command('python/m5/info.py', 622 [ '#/COPYING', '#/LICENSE', '#/README', ], 623 MakeAction(makeInfoPyFile, Transform("INFO"))) 624PySource('m5', 'python/m5/info.py') 625 626######################################################################## 627# 628# Create all of the SimObject param headers and enum headers 629# 630 631def createSimObjectParamStruct(target, source, env): 632 assert len(target) == 1 and len(source) == 1 633 634 name = str(source[0].get_contents()) 635 obj = sim_objects[name] 636 637 code = code_formatter() 638 obj.cxx_param_decl(code) 639 code.write(target[0].abspath) 640 641def createSimObjectCxxConfig(is_header): 642 def body(target, source, env): 643 assert len(target) == 1 and len(source) == 1 644 645 name = str(source[0].get_contents()) 646 obj = sim_objects[name] 647 648 code = code_formatter() 649 obj.cxx_config_param_file(code, is_header) 650 code.write(target[0].abspath) 651 return body 652 653def createParamSwigWrapper(target, source, env): 654 assert len(target) == 1 and len(source) == 1 655 656 name = str(source[0].get_contents()) 657 param = params_to_swig[name] 658 659 code = code_formatter() 660 param.swig_decl(code) 661 code.write(target[0].abspath) 662 663def createEnumStrings(target, source, env): 664 assert len(target) == 1 and len(source) == 1 665 666 name = str(source[0].get_contents()) 667 obj = all_enums[name] 668 669 code = code_formatter() 670 obj.cxx_def(code) 671 code.write(target[0].abspath) 672 673def createEnumDecls(target, source, env): 674 assert len(target) == 1 and len(source) == 1 675 676 name = str(source[0].get_contents()) 677 obj = all_enums[name] 678 679 code = code_formatter() 680 obj.cxx_decl(code) 681 code.write(target[0].abspath) 682 683def createEnumSwigWrapper(target, source, env): 684 assert len(target) == 1 and len(source) == 1 685 686 name = str(source[0].get_contents()) 687 obj = all_enums[name] 688 689 code = code_formatter() 690 obj.swig_decl(code) 691 code.write(target[0].abspath) 692 693def createSimObjectSwigWrapper(target, source, env): 694 name = source[0].get_contents() 695 obj = sim_objects[name] 696 697 code = code_formatter() 698 obj.swig_decl(code) 699 code.write(target[0].abspath) 700 701# dummy target for generated code 702# we start out with all the Source files so they get copied to build/*/ also. 703SWIG = env.Dummy('swig', [s.tnode for s in Source.get()]) 704 705# Generate all of the SimObject param C++ struct header files 706params_hh_files = [] 707for name,simobj in sorted(sim_objects.iteritems()): 708 py_source = PySource.modules[simobj.__module__] 709 extra_deps = [ py_source.tnode ] 710 711 hh_file = File('params/%s.hh' % name) 712 params_hh_files.append(hh_file) 713 env.Command(hh_file, Value(name), 714 MakeAction(createSimObjectParamStruct, Transform("SO PARAM"))) 715 env.Depends(hh_file, depends + extra_deps) 716 env.Depends(SWIG, hh_file) 717 718# C++ parameter description files 719if GetOption('with_cxx_config'): 720 for name,simobj in sorted(sim_objects.iteritems()): 721 py_source = PySource.modules[simobj.__module__] 722 extra_deps = [ py_source.tnode ] 723 724 cxx_config_hh_file = File('cxx_config/%s.hh' % name) 725 cxx_config_cc_file = File('cxx_config/%s.cc' % name) 726 env.Command(cxx_config_hh_file, Value(name), 727 MakeAction(createSimObjectCxxConfig(True), 728 Transform("CXXCPRHH"))) 729 env.Command(cxx_config_cc_file, Value(name), 730 MakeAction(createSimObjectCxxConfig(False), 731 Transform("CXXCPRCC"))) 732 env.Depends(cxx_config_hh_file, depends + extra_deps + 733 [File('params/%s.hh' % name), File('sim/cxx_config.hh')]) 734 env.Depends(cxx_config_cc_file, depends + extra_deps + 735 [cxx_config_hh_file]) 736 Source(cxx_config_cc_file) 737 738 cxx_config_init_cc_file = File('cxx_config/init.cc') 739 740 def createCxxConfigInitCC(target, source, env): 741 assert len(target) == 1 and len(source) == 1 742 743 code = code_formatter() 744 745 for name,simobj in sorted(sim_objects.iteritems()): 746 if not hasattr(simobj, 'abstract') or not simobj.abstract: 747 code('#include "cxx_config/${name}.hh"') 748 code() 749 code('void cxxConfigInit()') 750 code('{') 751 code.indent() 752 for name,simobj in sorted(sim_objects.iteritems()): 753 not_abstract = not hasattr(simobj, 'abstract') or \ 754 not simobj.abstract 755 if not_abstract and 'type' in simobj.__dict__: 756 code('cxx_config_directory["${name}"] = ' 757 '${name}CxxConfigParams::makeDirectoryEntry();') 758 code.dedent() 759 code('}') 760 code.write(target[0].abspath) 761 762 py_source = PySource.modules[simobj.__module__] 763 extra_deps = [ py_source.tnode ] 764 env.Command(cxx_config_init_cc_file, Value(name), 765 MakeAction(createCxxConfigInitCC, Transform("CXXCINIT"))) 766 cxx_param_hh_files = ["cxx_config/%s.hh" % simobj 767 for name,simobj in sorted(sim_objects.iteritems()) 768 if not hasattr(simobj, 'abstract') or not simobj.abstract] 769 Depends(cxx_config_init_cc_file, cxx_param_hh_files + 770 [File('sim/cxx_config.hh')]) 771 Source(cxx_config_init_cc_file) 772 773# Generate any needed param SWIG wrapper files 774params_i_files = [] 775for name,param in sorted(params_to_swig.iteritems()): 776 i_file = File('python/m5/internal/%s.i' % (param.swig_module_name())) 777 params_i_files.append(i_file) 778 env.Command(i_file, Value(name), 779 MakeAction(createParamSwigWrapper, Transform("SW PARAM"))) 780 env.Depends(i_file, depends) 781 env.Depends(SWIG, i_file) 782 SwigSource('m5.internal', i_file) 783 784# Generate all enum header files 785for name,enum in sorted(all_enums.iteritems()): 786 py_source = PySource.modules[enum.__module__] 787 extra_deps = [ py_source.tnode ] 788 789 cc_file = File('enums/%s.cc' % name) 790 env.Command(cc_file, Value(name), 791 MakeAction(createEnumStrings, Transform("ENUM STR"))) 792 env.Depends(cc_file, depends + extra_deps) 793 env.Depends(SWIG, cc_file) 794 Source(cc_file) 795 796 hh_file = File('enums/%s.hh' % name) 797 env.Command(hh_file, Value(name), 798 MakeAction(createEnumDecls, Transform("ENUMDECL"))) 799 env.Depends(hh_file, depends + extra_deps) 800 env.Depends(SWIG, hh_file) 801 802 i_file = File('python/m5/internal/enum_%s.i' % name) 803 env.Command(i_file, Value(name), 804 MakeAction(createEnumSwigWrapper, Transform("ENUMSWIG"))) 805 env.Depends(i_file, depends + extra_deps) 806 env.Depends(SWIG, i_file) 807 SwigSource('m5.internal', i_file) 808 809# Generate SimObject SWIG wrapper files 810for name,simobj in sorted(sim_objects.iteritems()): 811 py_source = PySource.modules[simobj.__module__] 812 extra_deps = [ py_source.tnode ] 813 i_file = File('python/m5/internal/param_%s.i' % name) 814 env.Command(i_file, Value(name), 815 MakeAction(createSimObjectSwigWrapper, Transform("SO SWIG"))) 816 env.Depends(i_file, depends + extra_deps) 817 SwigSource('m5.internal', i_file) 818 819# Generate the main swig init file
|
819def makeEmbeddedSwigInit(target, source, env): 820 code = code_formatter() 821 module = source[0].get_contents() 822 code('''\ 823#include "sim/init.hh"
| 820def makeEmbeddedSwigInit(package): 821 def body(target, source, env): 822 assert len(target) == 1 and len(source) == 1
|
824
| 823
|
825extern "C" { 826 void init_${module}(); 827}
| 824 code = code_formatter() 825 module = source[0].get_contents() 826 # Provide the full context so that the swig-generated call to 827 # Py_InitModule ends up placing the embedded module in the 828 # right package. 829 context = str(package) + "._" + str(module) 830 code('''\ 831 #include "sim/init.hh"
|
828
| 832
|
829EmbeddedSwig embed_swig_${module}(init_${module}); 830''') 831 code.write(str(target[0]))
| 833 extern "C" { 834 void init_${module}(); 835 }
|
832
| 836
|
| 837 EmbeddedSwig embed_swig_${module}(init_${module}, "${context}"); 838 ''') 839 code.write(str(target[0])) 840 return body 841
|
833# Build all swig modules 834for swig in SwigSource.all: 835 env.Command([swig.cc_source.tnode, swig.py_source.tnode], swig.tnode, 836 MakeAction('$SWIG $SWIGFLAGS -outdir ${TARGETS[1].dir} ' 837 '-o ${TARGETS[0]} $SOURCES', Transform("SWIG"))) 838 cc_file = str(swig.tnode) 839 init_file = '%s/%s_init.cc' % (dirname(cc_file), basename(cc_file)) 840 env.Command(init_file, Value(swig.module),
| 842# Build all swig modules 843for swig in SwigSource.all: 844 env.Command([swig.cc_source.tnode, swig.py_source.tnode], swig.tnode, 845 MakeAction('$SWIG $SWIGFLAGS -outdir ${TARGETS[1].dir} ' 846 '-o ${TARGETS[0]} $SOURCES', Transform("SWIG"))) 847 cc_file = str(swig.tnode) 848 init_file = '%s/%s_init.cc' % (dirname(cc_file), basename(cc_file)) 849 env.Command(init_file, Value(swig.module),
|
841 MakeAction(makeEmbeddedSwigInit, Transform("EMBED SW")))
| 850 MakeAction(makeEmbeddedSwigInit(swig.package), 851 Transform("EMBED SW")))
|
842 env.Depends(SWIG, init_file) 843 Source(init_file, **swig.guards) 844 845# Build all protocol buffers if we have got protoc and protobuf available 846if env['HAVE_PROTOBUF']: 847 for proto in ProtoBuf.all: 848 # Use both the source and header as the target, and the .proto 849 # file as the source. When executing the protoc compiler, also 850 # specify the proto_path to avoid having the generated files 851 # include the path. 852 env.Command([proto.cc_file, proto.hh_file], proto.tnode, 853 MakeAction('$PROTOC --cpp_out ${TARGET.dir} ' 854 '--proto_path ${SOURCE.dir} $SOURCE', 855 Transform("PROTOC"))) 856 857 env.Depends(SWIG, [proto.cc_file, proto.hh_file]) 858 # Add the C++ source file 859 Source(proto.cc_file, **proto.guards) 860elif ProtoBuf.all: 861 print 'Got protobuf to build, but lacks support!' 862 Exit(1) 863 864# 865# Handle debug flags 866# 867def makeDebugFlagCC(target, source, env): 868 assert(len(target) == 1 and len(source) == 1) 869 870 code = code_formatter() 871 872 # delay definition of CompoundFlags until after all the definition 873 # of all constituent SimpleFlags 874 comp_code = code_formatter() 875 876 # file header 877 code(''' 878/* 879 * DO NOT EDIT THIS FILE! Automatically generated by SCons. 880 */ 881 882#include "base/debug.hh" 883 884namespace Debug { 885 886''') 887 888 for name, flag in sorted(source[0].read().iteritems()): 889 n, compound, desc = flag 890 assert n == name 891 892 if not compound: 893 code('SimpleFlag $name("$name", "$desc");') 894 else: 895 comp_code('CompoundFlag $name("$name", "$desc",') 896 comp_code.indent() 897 last = len(compound) - 1 898 for i,flag in enumerate(compound): 899 if i != last: 900 comp_code('&$flag,') 901 else: 902 comp_code('&$flag);') 903 comp_code.dedent() 904 905 code.append(comp_code) 906 code() 907 code('} // namespace Debug') 908 909 code.write(str(target[0])) 910 911def makeDebugFlagHH(target, source, env): 912 assert(len(target) == 1 and len(source) == 1) 913 914 val = eval(source[0].get_contents()) 915 name, compound, desc = val 916 917 code = code_formatter() 918 919 # file header boilerplate 920 code('''\ 921/* 922 * DO NOT EDIT THIS FILE! Automatically generated by SCons. 923 */ 924 925#ifndef __DEBUG_${name}_HH__ 926#define __DEBUG_${name}_HH__ 927 928namespace Debug { 929''') 930 931 if compound: 932 code('class CompoundFlag;') 933 code('class SimpleFlag;') 934 935 if compound: 936 code('extern CompoundFlag $name;') 937 for flag in compound: 938 code('extern SimpleFlag $flag;') 939 else: 940 code('extern SimpleFlag $name;') 941 942 code(''' 943} 944 945#endif // __DEBUG_${name}_HH__ 946''') 947 948 code.write(str(target[0])) 949 950for name,flag in sorted(debug_flags.iteritems()): 951 n, compound, desc = flag 952 assert n == name 953 954 hh_file = 'debug/%s.hh' % name 955 env.Command(hh_file, Value(flag), 956 MakeAction(makeDebugFlagHH, Transform("TRACING", 0))) 957 env.Depends(SWIG, hh_file) 958 959env.Command('debug/flags.cc', Value(debug_flags), 960 MakeAction(makeDebugFlagCC, Transform("TRACING", 0))) 961env.Depends(SWIG, 'debug/flags.cc') 962Source('debug/flags.cc') 963 964# version tags 965tags = \ 966env.Command('sim/tags.cc', None, 967 MakeAction('util/cpt_upgrader.py --get-cc-file > $TARGET', 968 Transform("VER TAGS"))) 969env.AlwaysBuild(tags) 970 971# Embed python files. All .py files that have been indicated by a 972# PySource() call in a SConscript need to be embedded into the M5 973# library. To do that, we compile the file to byte code, marshal the 974# byte code, compress it, and then generate a c++ file that 975# inserts the result into an array. 976def embedPyFile(target, source, env): 977 def c_str(string): 978 if string is None: 979 return "0" 980 return '"%s"' % string 981 982 '''Action function to compile a .py into a code object, marshal 983 it, compress it, and stick it into an asm file so the code appears 984 as just bytes with a label in the data section''' 985 986 src = file(str(source[0]), 'r').read() 987 988 pysource = PySource.tnodes[source[0]] 989 compiled = compile(src, pysource.abspath, 'exec') 990 marshalled = marshal.dumps(compiled) 991 compressed = zlib.compress(marshalled) 992 data = compressed 993 sym = pysource.symname 994 995 code = code_formatter() 996 code('''\ 997#include "sim/init.hh" 998 999namespace { 1000 1001const uint8_t data_${sym}[] = { 1002''') 1003 code.indent() 1004 step = 16 1005 for i in xrange(0, len(data), step): 1006 x = array.array('B', data[i:i+step]) 1007 code(''.join('%d,' % d for d in x)) 1008 code.dedent() 1009 1010 code('''}; 1011 1012EmbeddedPython embedded_${sym}( 1013 ${{c_str(pysource.arcname)}}, 1014 ${{c_str(pysource.abspath)}}, 1015 ${{c_str(pysource.modpath)}}, 1016 data_${sym}, 1017 ${{len(data)}}, 1018 ${{len(marshalled)}}); 1019 1020} // anonymous namespace 1021''') 1022 code.write(str(target[0])) 1023 1024for source in PySource.all: 1025 env.Command(source.cpp, source.tnode, 1026 MakeAction(embedPyFile, Transform("EMBED PY"))) 1027 env.Depends(SWIG, source.cpp) 1028 Source(source.cpp, skip_no_python=True) 1029 1030######################################################################## 1031# 1032# Define binaries. Each different build type (debug, opt, etc.) gets 1033# a slightly different build environment. 1034# 1035 1036# List of constructed environments to pass back to SConstruct 1037date_source = Source('base/date.cc', skip_lib=True) 1038 1039# Capture this directory for the closure makeEnv, otherwise when it is 1040# called, it won't know what directory it should use. 1041variant_dir = Dir('.').path 1042def variant(*path): 1043 return os.path.join(variant_dir, *path) 1044def variantd(*path): 1045 return variant(*path)+'/' 1046 1047# Function to create a new build environment as clone of current 1048# environment 'env' with modified object suffix and optional stripped 1049# binary. Additional keyword arguments are appended to corresponding 1050# build environment vars. 1051def makeEnv(env, label, objsfx, strip = False, **kwargs): 1052 # SCons doesn't know to append a library suffix when there is a '.' in the 1053 # name. Use '_' instead. 1054 libname = variant('gem5_' + label) 1055 exename = variant('gem5.' + label) 1056 secondary_exename = variant('m5.' + label) 1057 1058 new_env = env.Clone(OBJSUFFIX=objsfx, SHOBJSUFFIX=objsfx + 's') 1059 new_env.Label = label 1060 new_env.Append(**kwargs) 1061 1062 swig_env = new_env.Clone() 1063 1064 # Both gcc and clang have issues with unused labels and values in 1065 # the SWIG generated code 1066 swig_env.Append(CCFLAGS=['-Wno-unused-label', '-Wno-unused-value']) 1067 1068 if env['GCC']: 1069 # Depending on the SWIG version, we also need to supress 1070 # warnings about uninitialized variables and missing field 1071 # initializers. 1072 swig_env.Append(CCFLAGS=['-Wno-uninitialized', 1073 '-Wno-missing-field-initializers', 1074 '-Wno-unused-but-set-variable', 1075 '-Wno-maybe-uninitialized', 1076 '-Wno-type-limits']) 1077 1078 # Only gcc >= 4.9 supports UBSan, so check both the version 1079 # and the command-line option before adding the compiler and 1080 # linker flags. 1081 if GetOption('with_ubsan') and \ 1082 compareVersions(env['GCC_VERSION'], '4.9') >= 0: 1083 new_env.Append(CCFLAGS='-fsanitize=undefined') 1084 new_env.Append(LINKFLAGS='-fsanitize=undefined') 1085 1086 # The address sanitizer is available for gcc >= 4.8 1087 if GetOption('with_asan'): 1088 new_env.Append(CCFLAGS=['-fsanitize=address', 1089 '-fno-omit-frame-pointer']) 1090 new_env.Append(LINKFLAGS='-fsanitize=address') 1091 1092 if env['CLANG']: 1093 swig_env.Append(CCFLAGS=['-Wno-sometimes-uninitialized', 1094 '-Wno-deprecated-register', 1095 '-Wno-tautological-compare']) 1096 1097 # We require clang >= 3.1, so there is no need to check any 1098 # versions here. 1099 if GetOption('with_ubsan'): 1100 new_env.Append(CCFLAGS='-fsanitize=undefined') 1101 new_env.Append(LINKFLAGS='-fsanitize=undefined') 1102 1103 if GetOption('with_asan'): 1104 new_env.Append(CCFLAGS=['-fsanitize=address', 1105 '-fno-omit-frame-pointer']) 1106 new_env.Append(LINKFLAGS='-fsanitize=address') 1107 1108 werror_env = new_env.Clone() 1109 # Treat warnings as errors but white list some warnings that we 1110 # want to allow (e.g., deprecation warnings). 1111 werror_env.Append(CCFLAGS=['-Werror', 1112 '-Wno-error=deprecated-declarations', 1113 '-Wno-error=deprecated', 1114 ]) 1115 1116 def make_obj(source, static, extra_deps = None): 1117 '''This function adds the specified source to the correct 1118 build environment, and returns the corresponding SCons Object 1119 nodes''' 1120 1121 if source.swig: 1122 env = swig_env 1123 elif source.Werror: 1124 env = werror_env 1125 else: 1126 env = new_env 1127 1128 if static: 1129 obj = env.StaticObject(source.tnode) 1130 else: 1131 obj = env.SharedObject(source.tnode) 1132 1133 if extra_deps: 1134 env.Depends(obj, extra_deps) 1135 1136 return obj 1137 1138 lib_guards = {'main': False, 'skip_lib': False} 1139 1140 # Without Python, leave out all SWIG and Python content from the 1141 # library builds. The option doesn't affect gem5 built as a program 1142 if GetOption('without_python'): 1143 lib_guards['skip_no_python'] = False 1144 1145 static_objs = [ make_obj(s, True) for s in Source.get(**lib_guards) ] 1146 shared_objs = [ make_obj(s, False) for s in Source.get(**lib_guards) ] 1147 1148 static_date = make_obj(date_source, static=True, extra_deps=static_objs) 1149 static_objs.append(static_date) 1150 1151 shared_date = make_obj(date_source, static=False, extra_deps=shared_objs) 1152 shared_objs.append(shared_date) 1153 1154 # First make a library of everything but main() so other programs can 1155 # link against m5. 1156 static_lib = new_env.StaticLibrary(libname, static_objs) 1157 shared_lib = new_env.SharedLibrary(libname, shared_objs) 1158 1159 # Now link a stub with main() and the static library. 1160 main_objs = [ make_obj(s, True) for s in Source.get(main=True) ] 1161 1162 for test in UnitTest.all: 1163 flags = { test.target : True } 1164 test_sources = Source.get(**flags) 1165 test_objs = [ make_obj(s, static=True) for s in test_sources ] 1166 if test.main: 1167 test_objs += main_objs 1168 path = variant('unittest/%s.%s' % (test.target, label)) 1169 new_env.Program(path, test_objs + static_objs) 1170 1171 progname = exename 1172 if strip: 1173 progname += '.unstripped' 1174 1175 targets = new_env.Program(progname, main_objs + static_objs) 1176 1177 if strip: 1178 if sys.platform == 'sunos5': 1179 cmd = 'cp $SOURCE $TARGET; strip $TARGET' 1180 else: 1181 cmd = 'strip $SOURCE -o $TARGET' 1182 targets = new_env.Command(exename, progname, 1183 MakeAction(cmd, Transform("STRIP"))) 1184 1185 new_env.Command(secondary_exename, exename, 1186 MakeAction('ln $SOURCE $TARGET', Transform("HARDLINK"))) 1187 1188 new_env.M5Binary = targets[0] 1189 return new_env 1190 1191# Start out with the compiler flags common to all compilers, 1192# i.e. they all use -g for opt and -g -pg for prof 1193ccflags = {'debug' : [], 'opt' : ['-g'], 'fast' : [], 'prof' : ['-g', '-pg'], 1194 'perf' : ['-g']} 1195 1196# Start out with the linker flags common to all linkers, i.e. -pg for 1197# prof, and -lprofiler for perf. The -lprofile flag is surrounded by 1198# no-as-needed and as-needed as the binutils linker is too clever and 1199# simply doesn't link to the library otherwise. 1200ldflags = {'debug' : [], 'opt' : [], 'fast' : [], 'prof' : ['-pg'], 1201 'perf' : ['-Wl,--no-as-needed', '-lprofiler', '-Wl,--as-needed']} 1202 1203# For Link Time Optimization, the optimisation flags used to compile 1204# individual files are decoupled from those used at link time 1205# (i.e. you can compile with -O3 and perform LTO with -O0), so we need 1206# to also update the linker flags based on the target. 1207if env['GCC']: 1208 if sys.platform == 'sunos5': 1209 ccflags['debug'] += ['-gstabs+'] 1210 else: 1211 ccflags['debug'] += ['-ggdb3'] 1212 ldflags['debug'] += ['-O0'] 1213 # opt, fast, prof and perf all share the same cc flags, also add 1214 # the optimization to the ldflags as LTO defers the optimization 1215 # to link time 1216 for target in ['opt', 'fast', 'prof', 'perf']: 1217 ccflags[target] += ['-O3'] 1218 ldflags[target] += ['-O3'] 1219 1220 ccflags['fast'] += env['LTO_CCFLAGS'] 1221 ldflags['fast'] += env['LTO_LDFLAGS'] 1222elif env['CLANG']: 1223 ccflags['debug'] += ['-g', '-O0'] 1224 # opt, fast, prof and perf all share the same cc flags 1225 for target in ['opt', 'fast', 'prof', 'perf']: 1226 ccflags[target] += ['-O3'] 1227else: 1228 print 'Unknown compiler, please fix compiler options' 1229 Exit(1) 1230 1231 1232# To speed things up, we only instantiate the build environments we 1233# need. We try to identify the needed environment for each target; if 1234# we can't, we fall back on instantiating all the environments just to 1235# be safe. 1236target_types = ['debug', 'opt', 'fast', 'prof', 'perf'] 1237obj2target = {'do': 'debug', 'o': 'opt', 'fo': 'fast', 'po': 'prof', 1238 'gpo' : 'perf'} 1239 1240def identifyTarget(t): 1241 ext = t.split('.')[-1] 1242 if ext in target_types: 1243 return ext 1244 if obj2target.has_key(ext): 1245 return obj2target[ext] 1246 match = re.search(r'/tests/([^/]+)/', t) 1247 if match and match.group(1) in target_types: 1248 return match.group(1) 1249 return 'all' 1250 1251needed_envs = [identifyTarget(target) for target in BUILD_TARGETS] 1252if 'all' in needed_envs: 1253 needed_envs += target_types 1254 1255def makeEnvirons(target, source, env): 1256 # cause any later Source() calls to be fatal, as a diagnostic. 1257 Source.done() 1258 1259 envList = [] 1260 1261 # Debug binary 1262 if 'debug' in needed_envs: 1263 envList.append( 1264 makeEnv(env, 'debug', '.do', 1265 CCFLAGS = Split(ccflags['debug']), 1266 CPPDEFINES = ['DEBUG', 'TRACING_ON=1'], 1267 LINKFLAGS = Split(ldflags['debug']))) 1268 1269 # Optimized binary 1270 if 'opt' in needed_envs: 1271 envList.append( 1272 makeEnv(env, 'opt', '.o', 1273 CCFLAGS = Split(ccflags['opt']), 1274 CPPDEFINES = ['TRACING_ON=1'], 1275 LINKFLAGS = Split(ldflags['opt']))) 1276 1277 # "Fast" binary 1278 if 'fast' in needed_envs: 1279 envList.append( 1280 makeEnv(env, 'fast', '.fo', strip = True, 1281 CCFLAGS = Split(ccflags['fast']), 1282 CPPDEFINES = ['NDEBUG', 'TRACING_ON=0'], 1283 LINKFLAGS = Split(ldflags['fast']))) 1284 1285 # Profiled binary using gprof 1286 if 'prof' in needed_envs: 1287 envList.append( 1288 makeEnv(env, 'prof', '.po', 1289 CCFLAGS = Split(ccflags['prof']), 1290 CPPDEFINES = ['NDEBUG', 'TRACING_ON=0'], 1291 LINKFLAGS = Split(ldflags['prof']))) 1292 1293 # Profiled binary using google-pprof 1294 if 'perf' in needed_envs: 1295 envList.append( 1296 makeEnv(env, 'perf', '.gpo', 1297 CCFLAGS = Split(ccflags['perf']), 1298 CPPDEFINES = ['NDEBUG', 'TRACING_ON=0'], 1299 LINKFLAGS = Split(ldflags['perf']))) 1300 1301 # Set up the regression tests for each build. 1302 for e in envList: 1303 SConscript(os.path.join(env.root.abspath, 'tests', 'SConscript'), 1304 variant_dir = variantd('tests', e.Label), 1305 exports = { 'env' : e }, duplicate = False) 1306 1307# The MakeEnvirons Builder defers the full dependency collection until 1308# after processing the ISA definition (due to dynamically generated 1309# source files). Add this dependency to all targets so they will wait 1310# until the environments are completely set up. Otherwise, a second 1311# process (e.g. -j2 or higher) will try to compile the requested target, 1312# not know how, and fail. 1313env.Append(BUILDERS = {'MakeEnvirons' : 1314 Builder(action=MakeAction(makeEnvirons, 1315 Transform("ENVIRONS", 1)))}) 1316 1317isa_target = env['PHONY_BASE'] + '-deps' 1318environs = env['PHONY_BASE'] + '-environs' 1319env.Depends('#all-deps', isa_target) 1320env.Depends('#all-environs', environs) 1321env.ScanISA(isa_target, File('arch/%s/generated/inc.d' % env['TARGET_ISA'])) 1322envSetup = env.MakeEnvirons(environs, isa_target) 1323 1324# make sure no -deps targets occur before all ISAs are complete 1325env.Depends(isa_target, '#all-isas') 1326# likewise for -environs targets and all the -deps targets 1327env.Depends(environs, '#all-deps')
| 852 env.Depends(SWIG, init_file) 853 Source(init_file, **swig.guards) 854 855# Build all protocol buffers if we have got protoc and protobuf available 856if env['HAVE_PROTOBUF']: 857 for proto in ProtoBuf.all: 858 # Use both the source and header as the target, and the .proto 859 # file as the source. When executing the protoc compiler, also 860 # specify the proto_path to avoid having the generated files 861 # include the path. 862 env.Command([proto.cc_file, proto.hh_file], proto.tnode, 863 MakeAction('$PROTOC --cpp_out ${TARGET.dir} ' 864 '--proto_path ${SOURCE.dir} $SOURCE', 865 Transform("PROTOC"))) 866 867 env.Depends(SWIG, [proto.cc_file, proto.hh_file]) 868 # Add the C++ source file 869 Source(proto.cc_file, **proto.guards) 870elif ProtoBuf.all: 871 print 'Got protobuf to build, but lacks support!' 872 Exit(1) 873 874# 875# Handle debug flags 876# 877def makeDebugFlagCC(target, source, env): 878 assert(len(target) == 1 and len(source) == 1) 879 880 code = code_formatter() 881 882 # delay definition of CompoundFlags until after all the definition 883 # of all constituent SimpleFlags 884 comp_code = code_formatter() 885 886 # file header 887 code(''' 888/* 889 * DO NOT EDIT THIS FILE! Automatically generated by SCons. 890 */ 891 892#include "base/debug.hh" 893 894namespace Debug { 895 896''') 897 898 for name, flag in sorted(source[0].read().iteritems()): 899 n, compound, desc = flag 900 assert n == name 901 902 if not compound: 903 code('SimpleFlag $name("$name", "$desc");') 904 else: 905 comp_code('CompoundFlag $name("$name", "$desc",') 906 comp_code.indent() 907 last = len(compound) - 1 908 for i,flag in enumerate(compound): 909 if i != last: 910 comp_code('&$flag,') 911 else: 912 comp_code('&$flag);') 913 comp_code.dedent() 914 915 code.append(comp_code) 916 code() 917 code('} // namespace Debug') 918 919 code.write(str(target[0])) 920 921def makeDebugFlagHH(target, source, env): 922 assert(len(target) == 1 and len(source) == 1) 923 924 val = eval(source[0].get_contents()) 925 name, compound, desc = val 926 927 code = code_formatter() 928 929 # file header boilerplate 930 code('''\ 931/* 932 * DO NOT EDIT THIS FILE! Automatically generated by SCons. 933 */ 934 935#ifndef __DEBUG_${name}_HH__ 936#define __DEBUG_${name}_HH__ 937 938namespace Debug { 939''') 940 941 if compound: 942 code('class CompoundFlag;') 943 code('class SimpleFlag;') 944 945 if compound: 946 code('extern CompoundFlag $name;') 947 for flag in compound: 948 code('extern SimpleFlag $flag;') 949 else: 950 code('extern SimpleFlag $name;') 951 952 code(''' 953} 954 955#endif // __DEBUG_${name}_HH__ 956''') 957 958 code.write(str(target[0])) 959 960for name,flag in sorted(debug_flags.iteritems()): 961 n, compound, desc = flag 962 assert n == name 963 964 hh_file = 'debug/%s.hh' % name 965 env.Command(hh_file, Value(flag), 966 MakeAction(makeDebugFlagHH, Transform("TRACING", 0))) 967 env.Depends(SWIG, hh_file) 968 969env.Command('debug/flags.cc', Value(debug_flags), 970 MakeAction(makeDebugFlagCC, Transform("TRACING", 0))) 971env.Depends(SWIG, 'debug/flags.cc') 972Source('debug/flags.cc') 973 974# version tags 975tags = \ 976env.Command('sim/tags.cc', None, 977 MakeAction('util/cpt_upgrader.py --get-cc-file > $TARGET', 978 Transform("VER TAGS"))) 979env.AlwaysBuild(tags) 980 981# Embed python files. All .py files that have been indicated by a 982# PySource() call in a SConscript need to be embedded into the M5 983# library. To do that, we compile the file to byte code, marshal the 984# byte code, compress it, and then generate a c++ file that 985# inserts the result into an array. 986def embedPyFile(target, source, env): 987 def c_str(string): 988 if string is None: 989 return "0" 990 return '"%s"' % string 991 992 '''Action function to compile a .py into a code object, marshal 993 it, compress it, and stick it into an asm file so the code appears 994 as just bytes with a label in the data section''' 995 996 src = file(str(source[0]), 'r').read() 997 998 pysource = PySource.tnodes[source[0]] 999 compiled = compile(src, pysource.abspath, 'exec') 1000 marshalled = marshal.dumps(compiled) 1001 compressed = zlib.compress(marshalled) 1002 data = compressed 1003 sym = pysource.symname 1004 1005 code = code_formatter() 1006 code('''\ 1007#include "sim/init.hh" 1008 1009namespace { 1010 1011const uint8_t data_${sym}[] = { 1012''') 1013 code.indent() 1014 step = 16 1015 for i in xrange(0, len(data), step): 1016 x = array.array('B', data[i:i+step]) 1017 code(''.join('%d,' % d for d in x)) 1018 code.dedent() 1019 1020 code('''}; 1021 1022EmbeddedPython embedded_${sym}( 1023 ${{c_str(pysource.arcname)}}, 1024 ${{c_str(pysource.abspath)}}, 1025 ${{c_str(pysource.modpath)}}, 1026 data_${sym}, 1027 ${{len(data)}}, 1028 ${{len(marshalled)}}); 1029 1030} // anonymous namespace 1031''') 1032 code.write(str(target[0])) 1033 1034for source in PySource.all: 1035 env.Command(source.cpp, source.tnode, 1036 MakeAction(embedPyFile, Transform("EMBED PY"))) 1037 env.Depends(SWIG, source.cpp) 1038 Source(source.cpp, skip_no_python=True) 1039 1040######################################################################## 1041# 1042# Define binaries. Each different build type (debug, opt, etc.) gets 1043# a slightly different build environment. 1044# 1045 1046# List of constructed environments to pass back to SConstruct 1047date_source = Source('base/date.cc', skip_lib=True) 1048 1049# Capture this directory for the closure makeEnv, otherwise when it is 1050# called, it won't know what directory it should use. 1051variant_dir = Dir('.').path 1052def variant(*path): 1053 return os.path.join(variant_dir, *path) 1054def variantd(*path): 1055 return variant(*path)+'/' 1056 1057# Function to create a new build environment as clone of current 1058# environment 'env' with modified object suffix and optional stripped 1059# binary. Additional keyword arguments are appended to corresponding 1060# build environment vars. 1061def makeEnv(env, label, objsfx, strip = False, **kwargs): 1062 # SCons doesn't know to append a library suffix when there is a '.' in the 1063 # name. Use '_' instead. 1064 libname = variant('gem5_' + label) 1065 exename = variant('gem5.' + label) 1066 secondary_exename = variant('m5.' + label) 1067 1068 new_env = env.Clone(OBJSUFFIX=objsfx, SHOBJSUFFIX=objsfx + 's') 1069 new_env.Label = label 1070 new_env.Append(**kwargs) 1071 1072 swig_env = new_env.Clone() 1073 1074 # Both gcc and clang have issues with unused labels and values in 1075 # the SWIG generated code 1076 swig_env.Append(CCFLAGS=['-Wno-unused-label', '-Wno-unused-value']) 1077 1078 if env['GCC']: 1079 # Depending on the SWIG version, we also need to supress 1080 # warnings about uninitialized variables and missing field 1081 # initializers. 1082 swig_env.Append(CCFLAGS=['-Wno-uninitialized', 1083 '-Wno-missing-field-initializers', 1084 '-Wno-unused-but-set-variable', 1085 '-Wno-maybe-uninitialized', 1086 '-Wno-type-limits']) 1087 1088 # Only gcc >= 4.9 supports UBSan, so check both the version 1089 # and the command-line option before adding the compiler and 1090 # linker flags. 1091 if GetOption('with_ubsan') and \ 1092 compareVersions(env['GCC_VERSION'], '4.9') >= 0: 1093 new_env.Append(CCFLAGS='-fsanitize=undefined') 1094 new_env.Append(LINKFLAGS='-fsanitize=undefined') 1095 1096 # The address sanitizer is available for gcc >= 4.8 1097 if GetOption('with_asan'): 1098 new_env.Append(CCFLAGS=['-fsanitize=address', 1099 '-fno-omit-frame-pointer']) 1100 new_env.Append(LINKFLAGS='-fsanitize=address') 1101 1102 if env['CLANG']: 1103 swig_env.Append(CCFLAGS=['-Wno-sometimes-uninitialized', 1104 '-Wno-deprecated-register', 1105 '-Wno-tautological-compare']) 1106 1107 # We require clang >= 3.1, so there is no need to check any 1108 # versions here. 1109 if GetOption('with_ubsan'): 1110 new_env.Append(CCFLAGS='-fsanitize=undefined') 1111 new_env.Append(LINKFLAGS='-fsanitize=undefined') 1112 1113 if GetOption('with_asan'): 1114 new_env.Append(CCFLAGS=['-fsanitize=address', 1115 '-fno-omit-frame-pointer']) 1116 new_env.Append(LINKFLAGS='-fsanitize=address') 1117 1118 werror_env = new_env.Clone() 1119 # Treat warnings as errors but white list some warnings that we 1120 # want to allow (e.g., deprecation warnings). 1121 werror_env.Append(CCFLAGS=['-Werror', 1122 '-Wno-error=deprecated-declarations', 1123 '-Wno-error=deprecated', 1124 ]) 1125 1126 def make_obj(source, static, extra_deps = None): 1127 '''This function adds the specified source to the correct 1128 build environment, and returns the corresponding SCons Object 1129 nodes''' 1130 1131 if source.swig: 1132 env = swig_env 1133 elif source.Werror: 1134 env = werror_env 1135 else: 1136 env = new_env 1137 1138 if static: 1139 obj = env.StaticObject(source.tnode) 1140 else: 1141 obj = env.SharedObject(source.tnode) 1142 1143 if extra_deps: 1144 env.Depends(obj, extra_deps) 1145 1146 return obj 1147 1148 lib_guards = {'main': False, 'skip_lib': False} 1149 1150 # Without Python, leave out all SWIG and Python content from the 1151 # library builds. The option doesn't affect gem5 built as a program 1152 if GetOption('without_python'): 1153 lib_guards['skip_no_python'] = False 1154 1155 static_objs = [ make_obj(s, True) for s in Source.get(**lib_guards) ] 1156 shared_objs = [ make_obj(s, False) for s in Source.get(**lib_guards) ] 1157 1158 static_date = make_obj(date_source, static=True, extra_deps=static_objs) 1159 static_objs.append(static_date) 1160 1161 shared_date = make_obj(date_source, static=False, extra_deps=shared_objs) 1162 shared_objs.append(shared_date) 1163 1164 # First make a library of everything but main() so other programs can 1165 # link against m5. 1166 static_lib = new_env.StaticLibrary(libname, static_objs) 1167 shared_lib = new_env.SharedLibrary(libname, shared_objs) 1168 1169 # Now link a stub with main() and the static library. 1170 main_objs = [ make_obj(s, True) for s in Source.get(main=True) ] 1171 1172 for test in UnitTest.all: 1173 flags = { test.target : True } 1174 test_sources = Source.get(**flags) 1175 test_objs = [ make_obj(s, static=True) for s in test_sources ] 1176 if test.main: 1177 test_objs += main_objs 1178 path = variant('unittest/%s.%s' % (test.target, label)) 1179 new_env.Program(path, test_objs + static_objs) 1180 1181 progname = exename 1182 if strip: 1183 progname += '.unstripped' 1184 1185 targets = new_env.Program(progname, main_objs + static_objs) 1186 1187 if strip: 1188 if sys.platform == 'sunos5': 1189 cmd = 'cp $SOURCE $TARGET; strip $TARGET' 1190 else: 1191 cmd = 'strip $SOURCE -o $TARGET' 1192 targets = new_env.Command(exename, progname, 1193 MakeAction(cmd, Transform("STRIP"))) 1194 1195 new_env.Command(secondary_exename, exename, 1196 MakeAction('ln $SOURCE $TARGET', Transform("HARDLINK"))) 1197 1198 new_env.M5Binary = targets[0] 1199 return new_env 1200 1201# Start out with the compiler flags common to all compilers, 1202# i.e. they all use -g for opt and -g -pg for prof 1203ccflags = {'debug' : [], 'opt' : ['-g'], 'fast' : [], 'prof' : ['-g', '-pg'], 1204 'perf' : ['-g']} 1205 1206# Start out with the linker flags common to all linkers, i.e. -pg for 1207# prof, and -lprofiler for perf. The -lprofile flag is surrounded by 1208# no-as-needed and as-needed as the binutils linker is too clever and 1209# simply doesn't link to the library otherwise. 1210ldflags = {'debug' : [], 'opt' : [], 'fast' : [], 'prof' : ['-pg'], 1211 'perf' : ['-Wl,--no-as-needed', '-lprofiler', '-Wl,--as-needed']} 1212 1213# For Link Time Optimization, the optimisation flags used to compile 1214# individual files are decoupled from those used at link time 1215# (i.e. you can compile with -O3 and perform LTO with -O0), so we need 1216# to also update the linker flags based on the target. 1217if env['GCC']: 1218 if sys.platform == 'sunos5': 1219 ccflags['debug'] += ['-gstabs+'] 1220 else: 1221 ccflags['debug'] += ['-ggdb3'] 1222 ldflags['debug'] += ['-O0'] 1223 # opt, fast, prof and perf all share the same cc flags, also add 1224 # the optimization to the ldflags as LTO defers the optimization 1225 # to link time 1226 for target in ['opt', 'fast', 'prof', 'perf']: 1227 ccflags[target] += ['-O3'] 1228 ldflags[target] += ['-O3'] 1229 1230 ccflags['fast'] += env['LTO_CCFLAGS'] 1231 ldflags['fast'] += env['LTO_LDFLAGS'] 1232elif env['CLANG']: 1233 ccflags['debug'] += ['-g', '-O0'] 1234 # opt, fast, prof and perf all share the same cc flags 1235 for target in ['opt', 'fast', 'prof', 'perf']: 1236 ccflags[target] += ['-O3'] 1237else: 1238 print 'Unknown compiler, please fix compiler options' 1239 Exit(1) 1240 1241 1242# To speed things up, we only instantiate the build environments we 1243# need. We try to identify the needed environment for each target; if 1244# we can't, we fall back on instantiating all the environments just to 1245# be safe. 1246target_types = ['debug', 'opt', 'fast', 'prof', 'perf'] 1247obj2target = {'do': 'debug', 'o': 'opt', 'fo': 'fast', 'po': 'prof', 1248 'gpo' : 'perf'} 1249 1250def identifyTarget(t): 1251 ext = t.split('.')[-1] 1252 if ext in target_types: 1253 return ext 1254 if obj2target.has_key(ext): 1255 return obj2target[ext] 1256 match = re.search(r'/tests/([^/]+)/', t) 1257 if match and match.group(1) in target_types: 1258 return match.group(1) 1259 return 'all' 1260 1261needed_envs = [identifyTarget(target) for target in BUILD_TARGETS] 1262if 'all' in needed_envs: 1263 needed_envs += target_types 1264 1265def makeEnvirons(target, source, env): 1266 # cause any later Source() calls to be fatal, as a diagnostic. 1267 Source.done() 1268 1269 envList = [] 1270 1271 # Debug binary 1272 if 'debug' in needed_envs: 1273 envList.append( 1274 makeEnv(env, 'debug', '.do', 1275 CCFLAGS = Split(ccflags['debug']), 1276 CPPDEFINES = ['DEBUG', 'TRACING_ON=1'], 1277 LINKFLAGS = Split(ldflags['debug']))) 1278 1279 # Optimized binary 1280 if 'opt' in needed_envs: 1281 envList.append( 1282 makeEnv(env, 'opt', '.o', 1283 CCFLAGS = Split(ccflags['opt']), 1284 CPPDEFINES = ['TRACING_ON=1'], 1285 LINKFLAGS = Split(ldflags['opt']))) 1286 1287 # "Fast" binary 1288 if 'fast' in needed_envs: 1289 envList.append( 1290 makeEnv(env, 'fast', '.fo', strip = True, 1291 CCFLAGS = Split(ccflags['fast']), 1292 CPPDEFINES = ['NDEBUG', 'TRACING_ON=0'], 1293 LINKFLAGS = Split(ldflags['fast']))) 1294 1295 # Profiled binary using gprof 1296 if 'prof' in needed_envs: 1297 envList.append( 1298 makeEnv(env, 'prof', '.po', 1299 CCFLAGS = Split(ccflags['prof']), 1300 CPPDEFINES = ['NDEBUG', 'TRACING_ON=0'], 1301 LINKFLAGS = Split(ldflags['prof']))) 1302 1303 # Profiled binary using google-pprof 1304 if 'perf' in needed_envs: 1305 envList.append( 1306 makeEnv(env, 'perf', '.gpo', 1307 CCFLAGS = Split(ccflags['perf']), 1308 CPPDEFINES = ['NDEBUG', 'TRACING_ON=0'], 1309 LINKFLAGS = Split(ldflags['perf']))) 1310 1311 # Set up the regression tests for each build. 1312 for e in envList: 1313 SConscript(os.path.join(env.root.abspath, 'tests', 'SConscript'), 1314 variant_dir = variantd('tests', e.Label), 1315 exports = { 'env' : e }, duplicate = False) 1316 1317# The MakeEnvirons Builder defers the full dependency collection until 1318# after processing the ISA definition (due to dynamically generated 1319# source files). Add this dependency to all targets so they will wait 1320# until the environments are completely set up. Otherwise, a second 1321# process (e.g. -j2 or higher) will try to compile the requested target, 1322# not know how, and fail. 1323env.Append(BUILDERS = {'MakeEnvirons' : 1324 Builder(action=MakeAction(makeEnvirons, 1325 Transform("ENVIRONS", 1)))}) 1326 1327isa_target = env['PHONY_BASE'] + '-deps' 1328environs = env['PHONY_BASE'] + '-environs' 1329env.Depends('#all-deps', isa_target) 1330env.Depends('#all-environs', environs) 1331env.ScanISA(isa_target, File('arch/%s/generated/inc.d' % env['TARGET_ISA'])) 1332envSetup = env.MakeEnvirons(environs, isa_target) 1333 1334# make sure no -deps targets occur before all ISAs are complete 1335env.Depends(isa_target, '#all-isas') 1336# likewise for -environs targets and all the -deps targets 1337env.Depends(environs, '#all-deps')
|