1# Copyright (c) 2012-2013 ARM Limited
2# All rights reserved
3#
4# The license below extends only to copyright in the software and shall
5# not be construed as granting a license to any other intellectual
6# property including but not limited to intellectual property relating
7# to a hardware implementation of the functionality of the software
8# licensed hereunder. You may use the software subject to the license
9# terms below provided that you ensure that this notice is replicated
10# unmodified and in its entirety in all distributions of the software,
11# modified or unmodified, in source code or in binary form.
12#
13# Copyright (c) 2006-2008 The Regents of The University of Michigan
14# Copyright (c) 2010 Advanced Micro Devices, Inc.
15# All rights reserved.
16#
17# Redistribution and use in source and binary forms, with or without
18# modification, are permitted provided that the following conditions are
19# met: redistributions of source code must retain the above copyright
20# notice, this list of conditions and the following disclaimer;
21# redistributions in binary form must reproduce the above copyright
22# notice, this list of conditions and the following disclaimer in the
23# documentation and/or other materials provided with the distribution;
24# neither the name of the copyright holders nor the names of its
25# contributors may be used to endorse or promote products derived from
26# this software without specific prior written permission.
27#
28# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39#
40# Authors: Lisa Hsu
41
42import sys
43from os import getcwd
44from os.path import join as joinpath
45
46from common import CpuConfig
47from common import MemConfig
48
49import m5
50from m5.defines import buildEnv
51from m5.objects import *
52from m5.util import *
53
54addToPath('../common')
55
56def getCPUClass(cpu_type):
57 """Returns the required cpu class and the mode of operation."""
58 cls = CpuConfig.get(cpu_type)
59 return cls, cls.memory_mode()
60
61def setCPUClass(options):
62 """Returns two cpu classes and the initial mode of operation.
63
64 Restoring from a checkpoint or fast forwarding through a benchmark
65 can be done using one type of cpu, and then the actual
66 simulation can be carried out using another type. This function
67 returns these two types of cpus and the initial mode of operation
68 depending on the options provided.
69 """
70
71 TmpClass, test_mem_mode = getCPUClass(options.cpu_type)
72 CPUClass = None
73 if TmpClass.require_caches() and \
74 not options.caches and not options.ruby:
75 fatal("%s must be used with caches" % options.cpu_type)
76
77 if options.checkpoint_restore != None:
78 if options.restore_with_cpu != options.cpu_type:
79 CPUClass = TmpClass
80 TmpClass, test_mem_mode = getCPUClass(options.restore_with_cpu)
81 elif options.fast_forward:
82 CPUClass = TmpClass
83 TmpClass = AtomicSimpleCPU
84 test_mem_mode = 'atomic'
85
86 return (TmpClass, test_mem_mode, CPUClass)
87
88def setMemClass(options):
89 """Returns a memory controller class."""
90
91 return MemConfig.get(options.mem_type)
92
93def setWorkCountOptions(system, options):
94 if options.work_item_id != None:
95 system.work_item_id = options.work_item_id
96 if options.num_work_ids != None:
97 system.num_work_ids = options.num_work_ids
98 if options.work_begin_cpu_id_exit != None:
99 system.work_begin_cpu_id_exit = options.work_begin_cpu_id_exit
100 if options.work_end_exit_count != None:
101 system.work_end_exit_count = options.work_end_exit_count
102 if options.work_end_checkpoint_count != None:
103 system.work_end_ckpt_count = options.work_end_checkpoint_count
104 if options.work_begin_exit_count != None:
105 system.work_begin_exit_count = options.work_begin_exit_count
106 if options.work_begin_checkpoint_count != None:
107 system.work_begin_ckpt_count = options.work_begin_checkpoint_count
108 if options.work_cpus_checkpoint_count != None:
109 system.work_cpus_ckpt_count = options.work_cpus_checkpoint_count
110
111def findCptDir(options, cptdir, testsys):
112 """Figures out the directory from which the checkpointed state is read.
113
114 There are two different ways in which the directories holding checkpoints
115 can be named --
116 1. cpt.<benchmark name>.<instruction count when the checkpoint was taken>
117 2. cpt.<some number, usually the tick value when the checkpoint was taken>
118
119 This function parses through the options to figure out which one of the
120 above should be used for selecting the checkpoint, and then figures out
121 the appropriate directory.
122 """
123
124 from os.path import isdir, exists
125 from os import listdir
126 import re
127
128 if not isdir(cptdir):
129 fatal("checkpoint dir %s does not exist!", cptdir)
130
131 cpt_starttick = 0
132 if options.at_instruction or options.simpoint:
133 inst = options.checkpoint_restore
134 if options.simpoint:
135 # assume workload 0 has the simpoint
136 if testsys.cpu[0].workload[0].simpoint == 0:
137 fatal('Unable to find simpoint')
138 inst += int(testsys.cpu[0].workload[0].simpoint)
139
140 checkpoint_dir = joinpath(cptdir, "cpt.%s.%s" % (options.bench, inst))
141 if not exists(checkpoint_dir):
142 fatal("Unable to find checkpoint directory %s", checkpoint_dir)
143
144 elif options.restore_simpoint_checkpoint:
145 # Restore from SimPoint checkpoints
146 # Assumes that the checkpoint dir names are formatted as follows:
147 dirs = listdir(cptdir)
148 expr = re.compile('cpt\.simpoint_(\d+)_inst_(\d+)' +
149 '_weight_([\d\.e\-]+)_interval_(\d+)_warmup_(\d+)')
150 cpts = []
151 for dir in dirs:
152 match = expr.match(dir)
153 if match:
154 cpts.append(dir)
155 cpts.sort()
156
157 cpt_num = options.checkpoint_restore
158 if cpt_num > len(cpts):
159 fatal('Checkpoint %d not found', cpt_num)
160 checkpoint_dir = joinpath(cptdir, cpts[cpt_num - 1])
161 match = expr.match(cpts[cpt_num - 1])
162 if match:
163 index = int(match.group(1))
164 start_inst = int(match.group(2))
165 weight_inst = float(match.group(3))
166 interval_length = int(match.group(4))
167 warmup_length = int(match.group(5))
168 print "Resuming from", checkpoint_dir
169 simpoint_start_insts = []
170 simpoint_start_insts.append(warmup_length)
171 simpoint_start_insts.append(warmup_length + interval_length)
172 testsys.cpu[0].simpoint_start_insts = simpoint_start_insts
173 if testsys.switch_cpus != None:
174 testsys.switch_cpus[0].simpoint_start_insts = simpoint_start_insts
175
176 print "Resuming from SimPoint",
177 print "#%d, start_inst:%d, weight:%f, interval:%d, warmup:%d" % \
178 (index, start_inst, weight_inst, interval_length, warmup_length)
179
180 else:
181 dirs = listdir(cptdir)
182 expr = re.compile('cpt\.([0-9]+)')
183 cpts = []
184 for dir in dirs:
185 match = expr.match(dir)
186 if match:
187 cpts.append(match.group(1))
188
189 cpts.sort(lambda a,b: cmp(long(a), long(b)))
190
191 cpt_num = options.checkpoint_restore
192 if cpt_num > len(cpts):
193 fatal('Checkpoint %d not found', cpt_num)
194
195 cpt_starttick = int(cpts[cpt_num - 1])
196 checkpoint_dir = joinpath(cptdir, "cpt.%s" % cpts[cpt_num - 1])
197
198 return cpt_starttick, checkpoint_dir
199
200def scriptCheckpoints(options, maxtick, cptdir):
201 if options.at_instruction or options.simpoint:
202 checkpoint_inst = int(options.take_checkpoints)
203
204 # maintain correct offset if we restored from some instruction
205 if options.checkpoint_restore != None:
206 checkpoint_inst += options.checkpoint_restore
207
208 print "Creating checkpoint at inst:%d" % (checkpoint_inst)
209 exit_event = m5.simulate()
210 exit_cause = exit_event.getCause()
211 print "exit cause = %s" % exit_cause
212
213 # skip checkpoint instructions should they exist
214 while exit_cause == "checkpoint":
215 exit_event = m5.simulate()
216 exit_cause = exit_event.getCause()
217
218 if exit_cause == "a thread reached the max instruction count":
219 m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \
220 (options.bench, checkpoint_inst)))
221 print "Checkpoint written."
222
223 else:
224 when, period = options.take_checkpoints.split(",", 1)
225 when = int(when)
226 period = int(period)
227 num_checkpoints = 0
228
229 exit_event = m5.simulate(when - m5.curTick())
230 exit_cause = exit_event.getCause()
231 while exit_cause == "checkpoint":
232 exit_event = m5.simulate(when - m5.curTick())
233 exit_cause = exit_event.getCause()
234
235 if exit_cause == "simulate() limit reached":
236 m5.checkpoint(joinpath(cptdir, "cpt.%d"))
237 num_checkpoints += 1
238
239 sim_ticks = when
240 max_checkpoints = options.max_checkpoints
241
242 while num_checkpoints < max_checkpoints and \
243 exit_cause == "simulate() limit reached":
244 if (sim_ticks + period) > maxtick:
245 exit_event = m5.simulate(maxtick - sim_ticks)
246 exit_cause = exit_event.getCause()
247 break
248 else:
249 exit_event = m5.simulate(period)
250 exit_cause = exit_event.getCause()
251 sim_ticks += period
252 while exit_event.getCause() == "checkpoint":
253 exit_event = m5.simulate(sim_ticks - m5.curTick())
254 if exit_event.getCause() == "simulate() limit reached":
255 m5.checkpoint(joinpath(cptdir, "cpt.%d"))
256 num_checkpoints += 1
257
258 return exit_event
259
260def benchCheckpoints(options, maxtick, cptdir):
261 exit_event = m5.simulate(maxtick - m5.curTick())
262 exit_cause = exit_event.getCause()
263
264 num_checkpoints = 0
265 max_checkpoints = options.max_checkpoints
266
267 while exit_cause == "checkpoint":
268 m5.checkpoint(joinpath(cptdir, "cpt.%d"))
269 num_checkpoints += 1
270 if num_checkpoints == max_checkpoints:
271 exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
272 break
273
274 exit_event = m5.simulate(maxtick - m5.curTick())
275 exit_cause = exit_event.getCause()
276
277 return exit_event
278
279# Set up environment for taking SimPoint checkpoints
280# Expecting SimPoint files generated by SimPoint 3.2
281def parseSimpointAnalysisFile(options, testsys):
282 import re
283
284 simpoint_filename, weight_filename, interval_length, warmup_length = \
285 options.take_simpoint_checkpoints.split(",", 3)
286 print "simpoint analysis file:", simpoint_filename
287 print "simpoint weight file:", weight_filename
288 print "interval length:", interval_length
289 print "warmup length:", warmup_length
290
291 interval_length = int(interval_length)
292 warmup_length = int(warmup_length)
293
294 # Simpoint analysis output starts interval counts with 0.
295 simpoints = []
296 simpoint_start_insts = []
297
298 # Read in SimPoint analysis files
299 simpoint_file = open(simpoint_filename)
300 weight_file = open(weight_filename)
301 while True:
302 line = simpoint_file.readline()
303 if not line:
304 break
305 m = re.match("(\d+)\s+(\d+)", line)
306 if m:
307 interval = int(m.group(1))
308 else:
309 fatal('unrecognized line in simpoint file!')
310
311 line = weight_file.readline()
312 if not line:
313 fatal('not enough lines in simpoint weight file!')
314 m = re.match("([0-9\.e\-]+)\s+(\d+)", line)
315 if m:
316 weight = float(m.group(1))
317 else:
318 fatal('unrecognized line in simpoint weight file!')
319
320 if (interval * interval_length - warmup_length > 0):
321 starting_inst_count = \
322 interval * interval_length - warmup_length
323 actual_warmup_length = warmup_length
324 else:
325 # Not enough room for proper warmup
326 # Just starting from the beginning
327 starting_inst_count = 0
328 actual_warmup_length = interval * interval_length
329
330 simpoints.append((interval, weight, starting_inst_count,
331 actual_warmup_length))
332
333 # Sort SimPoints by starting inst count
334 simpoints.sort(key=lambda obj: obj[2])
335 for s in simpoints:
336 interval, weight, starting_inst_count, actual_warmup_length = s
337 print str(interval), str(weight), starting_inst_count, \
338 actual_warmup_length
339 simpoint_start_insts.append(starting_inst_count)
340
341 print "Total # of simpoints:", len(simpoints)
342 testsys.cpu[0].simpoint_start_insts = simpoint_start_insts
343
344 return (simpoints, interval_length)
345
346def takeSimpointCheckpoints(simpoints, interval_length, cptdir):
347 num_checkpoints = 0
348 index = 0
349 last_chkpnt_inst_count = -1
350 for simpoint in simpoints:
351 interval, weight, starting_inst_count, actual_warmup_length = simpoint
352 if starting_inst_count == last_chkpnt_inst_count:
353 # checkpoint starting point same as last time
354 # (when warmup period longer than starting point)
355 exit_cause = "simpoint starting point found"
356 code = 0
357 else:
358 exit_event = m5.simulate()
359
360 # skip checkpoint instructions should they exist
361 while exit_event.getCause() == "checkpoint":
362 print "Found 'checkpoint' exit event...ignoring..."
363 exit_event = m5.simulate()
364
365 exit_cause = exit_event.getCause()
366 code = exit_event.getCode()
367
368 if exit_cause == "simpoint starting point found":
369 m5.checkpoint(joinpath(cptdir,
370 "cpt.simpoint_%02d_inst_%d_weight_%f_interval_%d_warmup_%d"
371 % (index, starting_inst_count, weight, interval_length,
372 actual_warmup_length)))
373 print "Checkpoint #%d written. start inst:%d weight:%f" % \
374 (num_checkpoints, starting_inst_count, weight)
375 num_checkpoints += 1
376 last_chkpnt_inst_count = starting_inst_count
377 else:
378 break
379 index += 1
380
381 print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
382 print "%d checkpoints taken" % num_checkpoints
383 sys.exit(code)
384
385def restoreSimpointCheckpoint():
386 exit_event = m5.simulate()
387 exit_cause = exit_event.getCause()
388
389 if exit_cause == "simpoint starting point found":
390 print "Warmed up! Dumping and resetting stats!"
391 m5.stats.dump()
392 m5.stats.reset()
393
394 exit_event = m5.simulate()
395 exit_cause = exit_event.getCause()
396
397 if exit_cause == "simpoint starting point found":
398 print "Done running SimPoint!"
399 sys.exit(exit_event.getCode())
400
401 print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
402 sys.exit(exit_event.getCode())
403
404def repeatSwitch(testsys, repeat_switch_cpu_list, maxtick, switch_freq):
405 print "starting switch loop"
406 while True:
407 exit_event = m5.simulate(switch_freq)
408 exit_cause = exit_event.getCause()
409
410 if exit_cause != "simulate() limit reached":
411 return exit_event
412
413 m5.switchCpus(testsys, repeat_switch_cpu_list)
414
415 tmp_cpu_list = []
416 for old_cpu, new_cpu in repeat_switch_cpu_list:
417 tmp_cpu_list.append((new_cpu, old_cpu))
418 repeat_switch_cpu_list = tmp_cpu_list
419
420 if (maxtick - m5.curTick()) <= switch_freq:
421 exit_event = m5.simulate(maxtick - m5.curTick())
422 return exit_event
423
424def run(options, root, testsys, cpu_class):
425 if options.checkpoint_dir:
426 cptdir = options.checkpoint_dir
427 elif m5.options.outdir:
428 cptdir = m5.options.outdir
429 else:
430 cptdir = getcwd()
431
432 if options.fast_forward and options.checkpoint_restore != None:
433 fatal("Can't specify both --fast-forward and --checkpoint-restore")
434
435 if options.standard_switch and not options.caches:
436 fatal("Must specify --caches when using --standard-switch")
437
438 if options.standard_switch and options.repeat_switch:
439 fatal("Can't specify both --standard-switch and --repeat-switch")
440
441 if options.repeat_switch and options.take_checkpoints:
442 fatal("Can't specify both --repeat-switch and --take-checkpoints")
443
444 np = options.num_cpus
445 switch_cpus = None
446
447 if options.prog_interval:
448 for i in xrange(np):
449 testsys.cpu[i].progress_interval = options.prog_interval
450
451 if options.maxinsts:
452 for i in xrange(np):
453 testsys.cpu[i].max_insts_any_thread = options.maxinsts
454
455 if cpu_class:
456 switch_cpus = [cpu_class(switched_out=True, cpu_id=(i))
457 for i in xrange(np)]
458
459 for i in xrange(np):
460 if options.fast_forward:
461 testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
462 switch_cpus[i].system = testsys
463 switch_cpus[i].workload = testsys.cpu[i].workload
464 switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
465 switch_cpus[i].progress_interval = \
466 testsys.cpu[i].progress_interval
467 switch_cpus[i].isa = testsys.cpu[i].isa
468 # simulation period
469 if options.maxinsts:
470 switch_cpus[i].max_insts_any_thread = options.maxinsts
471 # Add checker cpu if selected
472 if options.checker:
473 switch_cpus[i].addCheckerCpu()
474
475 # If elastic tracing is enabled attach the elastic trace probe
476 # to the switch CPUs
477 if options.elastic_trace_en:
478 CpuConfig.config_etrace(cpu_class, switch_cpus, options)
479
480 testsys.switch_cpus = switch_cpus
481 switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
482
483 if options.repeat_switch:
484 switch_class = getCPUClass(options.cpu_type)[0]
485 if switch_class.require_caches() and \
486 not options.caches:
487 print "%s: Must be used with caches" % str(switch_class)
488 sys.exit(1)
489 if not switch_class.support_take_over():
490 print "%s: CPU switching not supported" % str(switch_class)
491 sys.exit(1)
492
493 repeat_switch_cpus = [switch_class(switched_out=True, \
494 cpu_id=(i)) for i in xrange(np)]
495
496 for i in xrange(np):
497 repeat_switch_cpus[i].system = testsys
498 repeat_switch_cpus[i].workload = testsys.cpu[i].workload
499 repeat_switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
500 repeat_switch_cpus[i].isa = testsys.cpu[i].isa
501
502 if options.maxinsts:
503 repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts
504
505 if options.checker:
506 repeat_switch_cpus[i].addCheckerCpu()
507
508 testsys.repeat_switch_cpus = repeat_switch_cpus
509
510 if cpu_class:
511 repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i])
512 for i in xrange(np)]
513 else:
514 repeat_switch_cpu_list = [(testsys.cpu[i], repeat_switch_cpus[i])
515 for i in xrange(np)]
516
517 if options.standard_switch:
518 switch_cpus = [TimingSimpleCPU(switched_out=True, cpu_id=(i))
519 for i in xrange(np)]
520 switch_cpus_1 = [DerivO3CPU(switched_out=True, cpu_id=(i))
521 for i in xrange(np)]
522
523 for i in xrange(np):
524 switch_cpus[i].system = testsys
525 switch_cpus_1[i].system = testsys
526 switch_cpus[i].workload = testsys.cpu[i].workload
527 switch_cpus_1[i].workload = testsys.cpu[i].workload
528 switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
529 switch_cpus_1[i].clk_domain = testsys.cpu[i].clk_domain
530 switch_cpus[i].isa = testsys.cpu[i].isa
531 switch_cpus_1[i].isa = testsys.cpu[i].isa
532
533 # if restoring, make atomic cpu simulate only a few instructions
534 if options.checkpoint_restore != None:
535 testsys.cpu[i].max_insts_any_thread = 1
536 # Fast forward to specified location if we are not restoring
537 elif options.fast_forward:
538 testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
539 # Fast forward to a simpoint (warning: time consuming)
540 elif options.simpoint:
541 if testsys.cpu[i].workload[0].simpoint == 0:
542 fatal('simpoint not found')
543 testsys.cpu[i].max_insts_any_thread = \
544 testsys.cpu[i].workload[0].simpoint
545 # No distance specified, just switch
546 else:
547 testsys.cpu[i].max_insts_any_thread = 1
548
549 # warmup period
550 if options.warmup_insts:
551 switch_cpus[i].max_insts_any_thread = options.warmup_insts
552
553 # simulation period
554 if options.maxinsts:
555 switch_cpus_1[i].max_insts_any_thread = options.maxinsts
556
557 # attach the checker cpu if selected
558 if options.checker:
559 switch_cpus[i].addCheckerCpu()
560 switch_cpus_1[i].addCheckerCpu()
561
562 testsys.switch_cpus = switch_cpus
563 testsys.switch_cpus_1 = switch_cpus_1
564 switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
565 switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)]
566
567 # set the checkpoint in the cpu before m5.instantiate is called
568 if options.take_checkpoints != None and \
569 (options.simpoint or options.at_instruction):
570 offset = int(options.take_checkpoints)
571 # Set an instruction break point
572 if options.simpoint:
573 for i in xrange(np):
574 if testsys.cpu[i].workload[0].simpoint == 0:
575 fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
576 checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
577 testsys.cpu[i].max_insts_any_thread = checkpoint_inst
578 # used for output below
579 options.take_checkpoints = checkpoint_inst
580 else:
581 options.take_checkpoints = offset
582 # Set all test cpus with the right number of instructions
583 # for the upcoming simulation
584 for i in xrange(np):
585 testsys.cpu[i].max_insts_any_thread = offset
586
587 if options.take_simpoint_checkpoints != None:
588 simpoints, interval_length = parseSimpointAnalysisFile(options, testsys)
589
590 checkpoint_dir = None
591 if options.checkpoint_restore:
592 cpt_starttick, checkpoint_dir = findCptDir(options, cptdir, testsys)
593 m5.instantiate(checkpoint_dir)
594
595 # Initialization is complete. If we're not in control of simulation
596 # (that is, if we're a slave simulator acting as a component in another
597 # 'master' simulator) then we're done here. The other simulator will
598 # call simulate() directly. --initialize-only is used to indicate this.
599 if options.initialize_only:
600 return
601
602 # Handle the max tick settings now that tick frequency was resolved
603 # during system instantiation
604 # NOTE: the maxtick variable here is in absolute ticks, so it must
605 # include any simulated ticks before a checkpoint
606 explicit_maxticks = 0
607 maxtick_from_abs = m5.MaxTick
608 maxtick_from_rel = m5.MaxTick
609 maxtick_from_maxtime = m5.MaxTick
610 if options.abs_max_tick:
611 maxtick_from_abs = options.abs_max_tick
612 explicit_maxticks += 1
613 if options.rel_max_tick:
614 maxtick_from_rel = options.rel_max_tick
615 if options.checkpoint_restore:
616 # NOTE: this may need to be updated if checkpoints ever store
617 # the ticks per simulated second
618 maxtick_from_rel += cpt_starttick
619 if options.at_instruction or options.simpoint:
620 warn("Relative max tick specified with --at-instruction or" \
621 " --simpoint\n These options don't specify the " \
622 "checkpoint start tick, so assuming\n you mean " \
623 "absolute max tick")
624 explicit_maxticks += 1
625 if options.maxtime:
626 maxtick_from_maxtime = m5.ticks.fromSeconds(options.maxtime)
627 explicit_maxticks += 1
628 if explicit_maxticks > 1:
629 warn("Specified multiple of --abs-max-tick, --rel-max-tick, --maxtime."\
630 " Using least")
631 maxtick = min([maxtick_from_abs, maxtick_from_rel, maxtick_from_maxtime])
632
633 if options.checkpoint_restore != None and maxtick < cpt_starttick:
634 fatal("Bad maxtick (%d) specified: " \
635 "Checkpoint starts starts from tick: %d", maxtick, cpt_starttick)
636
637 if options.standard_switch or cpu_class:
638 if options.standard_switch:
639 print "Switch at instruction count:%s" % \
640 str(testsys.cpu[0].max_insts_any_thread)
641 exit_event = m5.simulate()
642 elif cpu_class and options.fast_forward:
643 print "Switch at instruction count:%s" % \
644 str(testsys.cpu[0].max_insts_any_thread)
645 exit_event = m5.simulate()
646 else:
647 print "Switch at curTick count:%s" % str(10000)
648 exit_event = m5.simulate(10000)
649 print "Switched CPUS @ tick %s" % (m5.curTick())
650
651 m5.switchCpus(testsys, switch_cpu_list)
652
653 if options.standard_switch:
654 print "Switch at instruction count:%d" % \
655 (testsys.switch_cpus[0].max_insts_any_thread)
656
657 #warmup instruction count may have already been set
658 if options.warmup_insts:
659 exit_event = m5.simulate()
660 else:
661 exit_event = m5.simulate(options.standard_switch)
662 print "Switching CPUS @ tick %s" % (m5.curTick())
663 print "Simulation ends instruction count:%d" % \
664 (testsys.switch_cpus_1[0].max_insts_any_thread)
665 m5.switchCpus(testsys, switch_cpu_list1)
666
667 # If we're taking and restoring checkpoints, use checkpoint_dir
668 # option only for finding the checkpoints to restore from. This
669 # lets us test checkpointing by restoring from one set of
670 # checkpoints, generating a second set, and then comparing them.
671 if (options.take_checkpoints or options.take_simpoint_checkpoints) \
672 and options.checkpoint_restore:
673
674 if m5.options.outdir:
675 cptdir = m5.options.outdir
676 else:
677 cptdir = getcwd()
678
679 if options.take_checkpoints != None :
680 # Checkpoints being taken via the command line at <when> and at
681 # subsequent periods of <period>. Checkpoint instructions
682 # received from the benchmark running are ignored and skipped in
683 # favor of command line checkpoint instructions.
684 exit_event = scriptCheckpoints(options, maxtick, cptdir)
685
686 # Take SimPoint checkpoints
687 elif options.take_simpoint_checkpoints != None:
688 takeSimpointCheckpoints(simpoints, interval_length, cptdir)
689
690 # Restore from SimPoint checkpoints
691 elif options.restore_simpoint_checkpoint != None:
692 restoreSimpointCheckpoint()
693
694 else:
695 if options.fast_forward:
696 m5.stats.reset()
697 print "**** REAL SIMULATION ****"
698
699 # If checkpoints are being taken, then the checkpoint instruction
700 # will occur in the benchmark code it self.
701 if options.repeat_switch and maxtick > options.repeat_switch:
702 exit_event = repeatSwitch(testsys, repeat_switch_cpu_list,
703 maxtick, options.repeat_switch)
704 else:
705 exit_event = benchCheckpoints(options, maxtick, cptdir)
706
707 print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_event.getCause())
708 if options.checkpoint_at_end:
709 m5.checkpoint(joinpath(cptdir, "cpt.%d"))
710
711 if not m5.options.interactive:
712 sys.exit(exit_event.getCode())