Options.py (13012:5fbc6b9c64bc) Options.py (13357:110926e15f1f)
1# Copyright (c) 2013 ARM Limited
2# All rights reserved.
3#
4# The license below extends only to copyright in the software and shall
5# not be construed as granting a license to any other intellectual
6# property including but not limited to intellectual property relating
7# to a hardware implementation of the functionality of the software
8# licensed hereunder. You may use the software subject to the license
9# terms below provided that you ensure that this notice is replicated
10# unmodified and in its entirety in all distributions of the software,
11# modified or unmodified, in source code or in binary form.
12#
13# Copyright (c) 2006-2008 The Regents of The University of Michigan
14# All rights reserved.
15#
16# Redistribution and use in source and binary forms, with or without
17# modification, are permitted provided that the following conditions are
18# met: redistributions of source code must retain the above copyright
19# notice, this list of conditions and the following disclaimer;
20# redistributions in binary form must reproduce the above copyright
21# notice, this list of conditions and the following disclaimer in the
22# documentation and/or other materials provided with the distribution;
23# neither the name of the copyright holders nor the names of its
24# contributors may be used to endorse or promote products derived from
25# this software without specific prior written permission.
26#
27# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
30# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
32# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
33# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
34# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
35# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
37# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38#
39# Authors: Lisa Hsu
40
41import m5
42from m5.defines import buildEnv
43from m5.objects import *
44from common.Benchmarks import *
45
46from common import CpuConfig
47from common import MemConfig
48from common import PlatformConfig
49
50def _listCpuTypes(option, opt, value, parser):
51 CpuConfig.print_cpu_list()
52 sys.exit(0)
53
54def _listMemTypes(option, opt, value, parser):
55 MemConfig.print_mem_list()
56 sys.exit(0)
57
58def _listPlatformTypes(option, opt, value, parser):
59 PlatformConfig.print_platform_list()
60 sys.exit(0)
61
62# Add the very basic options that work also in the case of the no ISA
63# being used, and consequently no CPUs, but rather various types of
64# testers and traffic generators.
65def addNoISAOptions(parser):
66 parser.add_option("-n", "--num-cpus", type="int", default=1)
67 parser.add_option("--sys-voltage", action="store", type="string",
68 default='1.0V',
69 help = """Top-level voltage for blocks running at system
70 power supply""")
71 parser.add_option("--sys-clock", action="store", type="string",
72 default='1GHz',
73 help = """Top-level clock for blocks running at system
74 speed""")
75
76 # Memory Options
77 parser.add_option("--list-mem-types",
78 action="callback", callback=_listMemTypes,
79 help="List available memory types")
80 parser.add_option("--mem-type", type="choice", default="DDR3_1600_8x8",
81 choices=MemConfig.mem_names(),
82 help = "type of memory to use")
83 parser.add_option("--mem-channels", type="int", default=1,
84 help = "number of memory channels")
85 parser.add_option("--mem-ranks", type="int", default=None,
86 help = "number of memory ranks per channel")
87 parser.add_option("--mem-size", action="store", type="string",
88 default="512MB",
89 help="Specify the physical memory size (single memory)")
90
91
92 parser.add_option("--memchecker", action="store_true")
93
94 # Cache Options
95 parser.add_option("--external-memory-system", type="string",
96 help="use external ports of this port_type for caches")
97 parser.add_option("--tlm-memory", type="string",
98 help="use external port for SystemC TLM cosimulation")
99 parser.add_option("--caches", action="store_true")
100 parser.add_option("--l2cache", action="store_true")
101 parser.add_option("--num-dirs", type="int", default=1)
102 parser.add_option("--num-l2caches", type="int", default=1)
103 parser.add_option("--num-l3caches", type="int", default=1)
104 parser.add_option("--l1d_size", type="string", default="64kB")
105 parser.add_option("--l1i_size", type="string", default="32kB")
106 parser.add_option("--l2_size", type="string", default="2MB")
107 parser.add_option("--l3_size", type="string", default="16MB")
108 parser.add_option("--l1d_assoc", type="int", default=2)
109 parser.add_option("--l1i_assoc", type="int", default=2)
110 parser.add_option("--l2_assoc", type="int", default=8)
111 parser.add_option("--l3_assoc", type="int", default=16)
112 parser.add_option("--cacheline_size", type="int", default=64)
113
114 # Enable Ruby
115 parser.add_option("--ruby", action="store_true")
116
117 # Run duration options
118 parser.add_option("-m", "--abs-max-tick", type="int", default=m5.MaxTick,
119 metavar="TICKS", help="Run to absolute simulated tick "
120 "specified including ticks from a restored checkpoint")
121 parser.add_option("--rel-max-tick", type="int", default=None,
122 metavar="TICKS", help="Simulate for specified number of"
123 " ticks relative to the simulation start tick (e.g. if "
124 "restoring a checkpoint)")
125 parser.add_option("--maxtime", type="float", default=None,
126 help="Run to the specified absolute simulated time in "
127 "seconds")
1# Copyright (c) 2013 ARM Limited
2# All rights reserved.
3#
4# The license below extends only to copyright in the software and shall
5# not be construed as granting a license to any other intellectual
6# property including but not limited to intellectual property relating
7# to a hardware implementation of the functionality of the software
8# licensed hereunder. You may use the software subject to the license
9# terms below provided that you ensure that this notice is replicated
10# unmodified and in its entirety in all distributions of the software,
11# modified or unmodified, in source code or in binary form.
12#
13# Copyright (c) 2006-2008 The Regents of The University of Michigan
14# All rights reserved.
15#
16# Redistribution and use in source and binary forms, with or without
17# modification, are permitted provided that the following conditions are
18# met: redistributions of source code must retain the above copyright
19# notice, this list of conditions and the following disclaimer;
20# redistributions in binary form must reproduce the above copyright
21# notice, this list of conditions and the following disclaimer in the
22# documentation and/or other materials provided with the distribution;
23# neither the name of the copyright holders nor the names of its
24# contributors may be used to endorse or promote products derived from
25# this software without specific prior written permission.
26#
27# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
30# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
32# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
33# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
34# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
35# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
37# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38#
39# Authors: Lisa Hsu
40
41import m5
42from m5.defines import buildEnv
43from m5.objects import *
44from common.Benchmarks import *
45
46from common import CpuConfig
47from common import MemConfig
48from common import PlatformConfig
49
50def _listCpuTypes(option, opt, value, parser):
51 CpuConfig.print_cpu_list()
52 sys.exit(0)
53
54def _listMemTypes(option, opt, value, parser):
55 MemConfig.print_mem_list()
56 sys.exit(0)
57
58def _listPlatformTypes(option, opt, value, parser):
59 PlatformConfig.print_platform_list()
60 sys.exit(0)
61
62# Add the very basic options that work also in the case of the no ISA
63# being used, and consequently no CPUs, but rather various types of
64# testers and traffic generators.
65def addNoISAOptions(parser):
66 parser.add_option("-n", "--num-cpus", type="int", default=1)
67 parser.add_option("--sys-voltage", action="store", type="string",
68 default='1.0V',
69 help = """Top-level voltage for blocks running at system
70 power supply""")
71 parser.add_option("--sys-clock", action="store", type="string",
72 default='1GHz',
73 help = """Top-level clock for blocks running at system
74 speed""")
75
76 # Memory Options
77 parser.add_option("--list-mem-types",
78 action="callback", callback=_listMemTypes,
79 help="List available memory types")
80 parser.add_option("--mem-type", type="choice", default="DDR3_1600_8x8",
81 choices=MemConfig.mem_names(),
82 help = "type of memory to use")
83 parser.add_option("--mem-channels", type="int", default=1,
84 help = "number of memory channels")
85 parser.add_option("--mem-ranks", type="int", default=None,
86 help = "number of memory ranks per channel")
87 parser.add_option("--mem-size", action="store", type="string",
88 default="512MB",
89 help="Specify the physical memory size (single memory)")
90
91
92 parser.add_option("--memchecker", action="store_true")
93
94 # Cache Options
95 parser.add_option("--external-memory-system", type="string",
96 help="use external ports of this port_type for caches")
97 parser.add_option("--tlm-memory", type="string",
98 help="use external port for SystemC TLM cosimulation")
99 parser.add_option("--caches", action="store_true")
100 parser.add_option("--l2cache", action="store_true")
101 parser.add_option("--num-dirs", type="int", default=1)
102 parser.add_option("--num-l2caches", type="int", default=1)
103 parser.add_option("--num-l3caches", type="int", default=1)
104 parser.add_option("--l1d_size", type="string", default="64kB")
105 parser.add_option("--l1i_size", type="string", default="32kB")
106 parser.add_option("--l2_size", type="string", default="2MB")
107 parser.add_option("--l3_size", type="string", default="16MB")
108 parser.add_option("--l1d_assoc", type="int", default=2)
109 parser.add_option("--l1i_assoc", type="int", default=2)
110 parser.add_option("--l2_assoc", type="int", default=8)
111 parser.add_option("--l3_assoc", type="int", default=16)
112 parser.add_option("--cacheline_size", type="int", default=64)
113
114 # Enable Ruby
115 parser.add_option("--ruby", action="store_true")
116
117 # Run duration options
118 parser.add_option("-m", "--abs-max-tick", type="int", default=m5.MaxTick,
119 metavar="TICKS", help="Run to absolute simulated tick "
120 "specified including ticks from a restored checkpoint")
121 parser.add_option("--rel-max-tick", type="int", default=None,
122 metavar="TICKS", help="Simulate for specified number of"
123 " ticks relative to the simulation start tick (e.g. if "
124 "restoring a checkpoint)")
125 parser.add_option("--maxtime", type="float", default=None,
126 help="Run to the specified absolute simulated time in "
127 "seconds")
128 parser.add_option("-P", "--param", action="append", default=[],
129 help="Set a SimObject parameter relative to the root node. "
130 "An extended Python multi range slicing syntax can be used "
131 "for arrays. For example: "
132 "'system.cpu[0,1,3:8:2].max_insts_all_threads = 42' "
133 "sets max_insts_all_threads for cpus 0, 1, 3, 5 and 7 "
134 "Direct parameters of the root object are not accessible, "
135 "only parameters of its children.")
128
129# Add common options that assume a non-NULL ISA.
130def addCommonOptions(parser):
131 # start by adding the base options that do not assume an ISA
132 addNoISAOptions(parser)
133
134 # system options
135 parser.add_option("--list-cpu-types",
136 action="callback", callback=_listCpuTypes,
137 help="List available CPU types")
138 parser.add_option("--cpu-type", type="choice", default="AtomicSimpleCPU",
139 choices=CpuConfig.cpu_names(),
140 help = "type of cpu to run with")
141 parser.add_option("--checker", action="store_true");
142 parser.add_option("--cpu-clock", action="store", type="string",
143 default='2GHz',
144 help="Clock for blocks running at CPU speed")
145 parser.add_option("--smt", action="store_true", default=False,
146 help = """
147 Only used if multiple programs are specified. If true,
148 then the number of threads per cpu is same as the
149 number of programs.""")
150 parser.add_option("--elastic-trace-en", action="store_true",
151 help="""Enable capture of data dependency and instruction
152 fetch traces using elastic trace probe.""")
153 # Trace file paths input to trace probe in a capture simulation and input
154 # to Trace CPU in a replay simulation
155 parser.add_option("--inst-trace-file", action="store", type="string",
156 help="""Instruction fetch trace file input to
157 Elastic Trace probe in a capture simulation and
158 Trace CPU in a replay simulation""", default="")
159 parser.add_option("--data-trace-file", action="store", type="string",
160 help="""Data dependency trace file input to
161 Elastic Trace probe in a capture simulation and
162 Trace CPU in a replay simulation""", default="")
163
164 parser.add_option("-l", "--lpae", action="store_true")
165 parser.add_option("-V", "--virtualisation", action="store_true")
166
167 # dist-gem5 options
168 parser.add_option("--dist", action="store_true",
169 help="Parallel distributed gem5 simulation.")
170 parser.add_option("--dist-sync-on-pseudo-op", action="store_true",
171 help="Use a pseudo-op to start dist-gem5 synchronization.")
172 parser.add_option("--is-switch", action="store_true",
173 help="Select the network switch simulator process for a"\
174 "distributed gem5 run")
175 parser.add_option("--dist-rank", default=0, action="store", type="int",
176 help="Rank of this system within the dist gem5 run.")
177 parser.add_option("--dist-size", default=0, action="store", type="int",
178 help="Number of gem5 processes within the dist gem5 run.")
179 parser.add_option("--dist-server-name",
180 default="127.0.0.1",
181 action="store", type="string",
182 help="Name of the message server host\nDEFAULT: localhost")
183 parser.add_option("--dist-server-port",
184 default=2200,
185 action="store", type="int",
186 help="Message server listen port\nDEFAULT: 2200")
187 parser.add_option("--dist-sync-repeat",
188 default="0us",
189 action="store", type="string",
190 help="Repeat interval for synchronisation barriers among dist-gem5 processes\nDEFAULT: --ethernet-linkdelay")
191 parser.add_option("--dist-sync-start",
192 default="5200000000000t",
193 action="store", type="string",
194 help="Time to schedule the first dist synchronisation barrier\nDEFAULT:5200000000000t")
195 parser.add_option("--ethernet-linkspeed", default="10Gbps",
196 action="store", type="string",
197 help="Link speed in bps\nDEFAULT: 10Gbps")
198 parser.add_option("--ethernet-linkdelay", default="10us",
199 action="store", type="string",
200 help="Link delay in seconds\nDEFAULT: 10us")
201
202 # Run duration options
203 parser.add_option("-I", "--maxinsts", action="store", type="int",
204 default=None, help="""Total number of instructions to
205 simulate (default: run forever)""")
206 parser.add_option("--work-item-id", action="store", type="int",
207 help="the specific work id for exit & checkpointing")
208 parser.add_option("--num-work-ids", action="store", type="int",
209 help="Number of distinct work item types")
210 parser.add_option("--work-begin-cpu-id-exit", action="store", type="int",
211 help="exit when work starts on the specified cpu")
212 parser.add_option("--work-end-exit-count", action="store", type="int",
213 help="exit at specified work end count")
214 parser.add_option("--work-begin-exit-count", action="store", type="int",
215 help="exit at specified work begin count")
216 parser.add_option("--init-param", action="store", type="int", default=0,
217 help="""Parameter available in simulation with m5
218 initparam""")
219 parser.add_option("--initialize-only", action="store_true", default=False,
220 help="""Exit after initialization. Do not simulate time.
221 Useful when gem5 is run as a library.""")
222
223 # Simpoint options
224 parser.add_option("--simpoint-profile", action="store_true",
225 help="Enable basic block profiling for SimPoints")
226 parser.add_option("--simpoint-interval", type="int", default=10000000,
227 help="SimPoint interval in num of instructions")
228 parser.add_option("--take-simpoint-checkpoints", action="store", type="string",
229 help="<simpoint file,weight file,interval-length,warmup-length>")
230 parser.add_option("--restore-simpoint-checkpoint", action="store_true",
231 help="restore from a simpoint checkpoint taken with " +
232 "--take-simpoint-checkpoints")
233
234 # Checkpointing options
235 ###Note that performing checkpointing via python script files will override
236 ###checkpoint instructions built into binaries.
237 parser.add_option("--take-checkpoints", action="store", type="string",
238 help="<M,N> take checkpoints at tick M and every N ticks thereafter")
239 parser.add_option("--max-checkpoints", action="store", type="int",
240 help="the maximum number of checkpoints to drop", default=5)
241 parser.add_option("--checkpoint-dir", action="store", type="string",
242 help="Place all checkpoints in this absolute directory")
243 parser.add_option("-r", "--checkpoint-restore", action="store", type="int",
244 help="restore from checkpoint <N>")
245 parser.add_option("--checkpoint-at-end", action="store_true",
246 help="take a checkpoint at end of run")
247 parser.add_option("--work-begin-checkpoint-count", action="store", type="int",
248 help="checkpoint at specified work begin count")
249 parser.add_option("--work-end-checkpoint-count", action="store", type="int",
250 help="checkpoint at specified work end count")
251 parser.add_option("--work-cpus-checkpoint-count", action="store", type="int",
252 help="checkpoint and exit when active cpu count is reached")
253 parser.add_option("--restore-with-cpu", action="store", type="choice",
254 default="AtomicSimpleCPU", choices=CpuConfig.cpu_names(),
255 help = "cpu type for restoring from a checkpoint")
256
257
258 # CPU Switching - default switch model goes from a checkpoint
259 # to a timing simple CPU with caches to warm up, then to detailed CPU for
260 # data measurement
261 parser.add_option("--repeat-switch", action="store", type="int",
262 default=None,
263 help="switch back and forth between CPUs with period <N>")
264 parser.add_option("-s", "--standard-switch", action="store", type="int",
265 default=None,
266 help="switch from timing to Detailed CPU after warmup period of <N>")
267 parser.add_option("-p", "--prog-interval", type="str",
268 help="CPU Progress Interval")
269
270 # Fastforwarding and simpoint related materials
271 parser.add_option("-W", "--warmup-insts", action="store", type="int",
272 default=None,
273 help="Warmup period in total instructions (requires --standard-switch)")
274 parser.add_option("--bench", action="store", type="string", default=None,
275 help="base names for --take-checkpoint and --checkpoint-restore")
276 parser.add_option("-F", "--fast-forward", action="store", type="string",
277 default=None,
278 help="Number of instructions to fast forward before switching")
279 parser.add_option("-S", "--simpoint", action="store_true", default=False,
280 help="""Use workload simpoints as an instruction offset for
281 --checkpoint-restore or --take-checkpoint.""")
282 parser.add_option("--at-instruction", action="store_true", default=False,
283 help="""Treat value of --checkpoint-restore or --take-checkpoint as a
284 number of instructions.""")
285 parser.add_option("--spec-input", default="ref", type="choice",
286 choices=["ref", "test", "train", "smred", "mdred",
287 "lgred"],
288 help="Input set size for SPEC CPU2000 benchmarks.")
289 parser.add_option("--arm-iset", default="arm", type="choice",
290 choices=["arm", "thumb", "aarch64"],
291 help="ARM instruction set.")
292
293
294def addSEOptions(parser):
295 # Benchmark options
296 parser.add_option("-c", "--cmd", default="",
297 help="The binary to run in syscall emulation mode.")
298 parser.add_option("-o", "--options", default="",
299 help="""The options to pass to the binary, use " "
300 around the entire string""")
301 parser.add_option("-e", "--env", default="",
302 help="Initialize workload environment from text file.")
303 parser.add_option("-i", "--input", default="",
304 help="Read stdin from a file.")
305 parser.add_option("--output", default="",
306 help="Redirect stdout to a file.")
307 parser.add_option("--errout", default="",
308 help="Redirect stderr to a file.")
309
310def addFSOptions(parser):
311 from FSConfig import os_types
312
313 # Simulation options
314 parser.add_option("--timesync", action="store_true",
315 help="Prevent simulated time from getting ahead of real time")
316
317 # System options
318 parser.add_option("--kernel", action="store", type="string")
319 parser.add_option("--os-type", action="store", type="choice",
320 choices=os_types[buildEnv['TARGET_ISA']], default="linux",
321 help="Specifies type of OS to boot")
322 parser.add_option("--script", action="store", type="string")
323 parser.add_option("--frame-capture", action="store_true",
324 help="Stores changed frame buffers from the VNC server to compressed "\
325 "files in the gem5 output directory")
326
327 if buildEnv['TARGET_ISA'] == "arm":
328 parser.add_option("--bare-metal", action="store_true",
329 help="Provide the raw system without the linux specific bits")
330 parser.add_option("--list-machine-types",
331 action="callback", callback=_listPlatformTypes,
332 help="List available platform types")
333 parser.add_option("--machine-type", action="store", type="choice",
334 choices=PlatformConfig.platform_names(),
335 default="VExpress_EMM")
336 parser.add_option("--dtb-filename", action="store", type="string",
337 help="Specifies device tree blob file to use with device-tree-"\
338 "enabled kernels")
339 parser.add_option("--enable-security-extensions", action="store_true",
340 help="Turn on the ARM Security Extensions")
341 parser.add_option("--enable-context-switch-stats-dump", \
342 action="store_true", help="Enable stats dump at context "\
343 "switches and dump tasks file (required for Streamline)")
344 parser.add_option("--generate-dtb", action="store_true", default=False,
345 help="Automatically generate a dtb file")
346
347 # Benchmark options
348 parser.add_option("--dual", action="store_true",
349 help="Simulate two systems attached with an ethernet link")
350 parser.add_option("-b", "--benchmark", action="store", type="string",
351 dest="benchmark",
352 help="Specify the benchmark to run. Available benchmarks: %s"\
353 % DefinedBenchmarks)
354
355 # Metafile options
356 parser.add_option("--etherdump", action="store", type="string", dest="etherdump",
357 help="Specify the filename to dump a pcap capture of the" \
358 "ethernet traffic")
359
360 # Disk Image Options
361 parser.add_option("--disk-image", action="store", type="string", default=None,
362 help="Path to the disk image to use.")
363 parser.add_option("--root-device", action="store", type="string", default=None,
364 help="OS device name for root partition")
365
366 # Command line options
367 parser.add_option("--command-line", action="store", type="string",
368 default=None,
369 help="Template for the kernel command line.")
370 parser.add_option("--command-line-file", action="store",
371 default=None, type="string",
372 help="File with a template for the kernel command line")
136
137# Add common options that assume a non-NULL ISA.
138def addCommonOptions(parser):
139 # start by adding the base options that do not assume an ISA
140 addNoISAOptions(parser)
141
142 # system options
143 parser.add_option("--list-cpu-types",
144 action="callback", callback=_listCpuTypes,
145 help="List available CPU types")
146 parser.add_option("--cpu-type", type="choice", default="AtomicSimpleCPU",
147 choices=CpuConfig.cpu_names(),
148 help = "type of cpu to run with")
149 parser.add_option("--checker", action="store_true");
150 parser.add_option("--cpu-clock", action="store", type="string",
151 default='2GHz',
152 help="Clock for blocks running at CPU speed")
153 parser.add_option("--smt", action="store_true", default=False,
154 help = """
155 Only used if multiple programs are specified. If true,
156 then the number of threads per cpu is same as the
157 number of programs.""")
158 parser.add_option("--elastic-trace-en", action="store_true",
159 help="""Enable capture of data dependency and instruction
160 fetch traces using elastic trace probe.""")
161 # Trace file paths input to trace probe in a capture simulation and input
162 # to Trace CPU in a replay simulation
163 parser.add_option("--inst-trace-file", action="store", type="string",
164 help="""Instruction fetch trace file input to
165 Elastic Trace probe in a capture simulation and
166 Trace CPU in a replay simulation""", default="")
167 parser.add_option("--data-trace-file", action="store", type="string",
168 help="""Data dependency trace file input to
169 Elastic Trace probe in a capture simulation and
170 Trace CPU in a replay simulation""", default="")
171
172 parser.add_option("-l", "--lpae", action="store_true")
173 parser.add_option("-V", "--virtualisation", action="store_true")
174
175 # dist-gem5 options
176 parser.add_option("--dist", action="store_true",
177 help="Parallel distributed gem5 simulation.")
178 parser.add_option("--dist-sync-on-pseudo-op", action="store_true",
179 help="Use a pseudo-op to start dist-gem5 synchronization.")
180 parser.add_option("--is-switch", action="store_true",
181 help="Select the network switch simulator process for a"\
182 "distributed gem5 run")
183 parser.add_option("--dist-rank", default=0, action="store", type="int",
184 help="Rank of this system within the dist gem5 run.")
185 parser.add_option("--dist-size", default=0, action="store", type="int",
186 help="Number of gem5 processes within the dist gem5 run.")
187 parser.add_option("--dist-server-name",
188 default="127.0.0.1",
189 action="store", type="string",
190 help="Name of the message server host\nDEFAULT: localhost")
191 parser.add_option("--dist-server-port",
192 default=2200,
193 action="store", type="int",
194 help="Message server listen port\nDEFAULT: 2200")
195 parser.add_option("--dist-sync-repeat",
196 default="0us",
197 action="store", type="string",
198 help="Repeat interval for synchronisation barriers among dist-gem5 processes\nDEFAULT: --ethernet-linkdelay")
199 parser.add_option("--dist-sync-start",
200 default="5200000000000t",
201 action="store", type="string",
202 help="Time to schedule the first dist synchronisation barrier\nDEFAULT:5200000000000t")
203 parser.add_option("--ethernet-linkspeed", default="10Gbps",
204 action="store", type="string",
205 help="Link speed in bps\nDEFAULT: 10Gbps")
206 parser.add_option("--ethernet-linkdelay", default="10us",
207 action="store", type="string",
208 help="Link delay in seconds\nDEFAULT: 10us")
209
210 # Run duration options
211 parser.add_option("-I", "--maxinsts", action="store", type="int",
212 default=None, help="""Total number of instructions to
213 simulate (default: run forever)""")
214 parser.add_option("--work-item-id", action="store", type="int",
215 help="the specific work id for exit & checkpointing")
216 parser.add_option("--num-work-ids", action="store", type="int",
217 help="Number of distinct work item types")
218 parser.add_option("--work-begin-cpu-id-exit", action="store", type="int",
219 help="exit when work starts on the specified cpu")
220 parser.add_option("--work-end-exit-count", action="store", type="int",
221 help="exit at specified work end count")
222 parser.add_option("--work-begin-exit-count", action="store", type="int",
223 help="exit at specified work begin count")
224 parser.add_option("--init-param", action="store", type="int", default=0,
225 help="""Parameter available in simulation with m5
226 initparam""")
227 parser.add_option("--initialize-only", action="store_true", default=False,
228 help="""Exit after initialization. Do not simulate time.
229 Useful when gem5 is run as a library.""")
230
231 # Simpoint options
232 parser.add_option("--simpoint-profile", action="store_true",
233 help="Enable basic block profiling for SimPoints")
234 parser.add_option("--simpoint-interval", type="int", default=10000000,
235 help="SimPoint interval in num of instructions")
236 parser.add_option("--take-simpoint-checkpoints", action="store", type="string",
237 help="<simpoint file,weight file,interval-length,warmup-length>")
238 parser.add_option("--restore-simpoint-checkpoint", action="store_true",
239 help="restore from a simpoint checkpoint taken with " +
240 "--take-simpoint-checkpoints")
241
242 # Checkpointing options
243 ###Note that performing checkpointing via python script files will override
244 ###checkpoint instructions built into binaries.
245 parser.add_option("--take-checkpoints", action="store", type="string",
246 help="<M,N> take checkpoints at tick M and every N ticks thereafter")
247 parser.add_option("--max-checkpoints", action="store", type="int",
248 help="the maximum number of checkpoints to drop", default=5)
249 parser.add_option("--checkpoint-dir", action="store", type="string",
250 help="Place all checkpoints in this absolute directory")
251 parser.add_option("-r", "--checkpoint-restore", action="store", type="int",
252 help="restore from checkpoint <N>")
253 parser.add_option("--checkpoint-at-end", action="store_true",
254 help="take a checkpoint at end of run")
255 parser.add_option("--work-begin-checkpoint-count", action="store", type="int",
256 help="checkpoint at specified work begin count")
257 parser.add_option("--work-end-checkpoint-count", action="store", type="int",
258 help="checkpoint at specified work end count")
259 parser.add_option("--work-cpus-checkpoint-count", action="store", type="int",
260 help="checkpoint and exit when active cpu count is reached")
261 parser.add_option("--restore-with-cpu", action="store", type="choice",
262 default="AtomicSimpleCPU", choices=CpuConfig.cpu_names(),
263 help = "cpu type for restoring from a checkpoint")
264
265
266 # CPU Switching - default switch model goes from a checkpoint
267 # to a timing simple CPU with caches to warm up, then to detailed CPU for
268 # data measurement
269 parser.add_option("--repeat-switch", action="store", type="int",
270 default=None,
271 help="switch back and forth between CPUs with period <N>")
272 parser.add_option("-s", "--standard-switch", action="store", type="int",
273 default=None,
274 help="switch from timing to Detailed CPU after warmup period of <N>")
275 parser.add_option("-p", "--prog-interval", type="str",
276 help="CPU Progress Interval")
277
278 # Fastforwarding and simpoint related materials
279 parser.add_option("-W", "--warmup-insts", action="store", type="int",
280 default=None,
281 help="Warmup period in total instructions (requires --standard-switch)")
282 parser.add_option("--bench", action="store", type="string", default=None,
283 help="base names for --take-checkpoint and --checkpoint-restore")
284 parser.add_option("-F", "--fast-forward", action="store", type="string",
285 default=None,
286 help="Number of instructions to fast forward before switching")
287 parser.add_option("-S", "--simpoint", action="store_true", default=False,
288 help="""Use workload simpoints as an instruction offset for
289 --checkpoint-restore or --take-checkpoint.""")
290 parser.add_option("--at-instruction", action="store_true", default=False,
291 help="""Treat value of --checkpoint-restore or --take-checkpoint as a
292 number of instructions.""")
293 parser.add_option("--spec-input", default="ref", type="choice",
294 choices=["ref", "test", "train", "smred", "mdred",
295 "lgred"],
296 help="Input set size for SPEC CPU2000 benchmarks.")
297 parser.add_option("--arm-iset", default="arm", type="choice",
298 choices=["arm", "thumb", "aarch64"],
299 help="ARM instruction set.")
300
301
302def addSEOptions(parser):
303 # Benchmark options
304 parser.add_option("-c", "--cmd", default="",
305 help="The binary to run in syscall emulation mode.")
306 parser.add_option("-o", "--options", default="",
307 help="""The options to pass to the binary, use " "
308 around the entire string""")
309 parser.add_option("-e", "--env", default="",
310 help="Initialize workload environment from text file.")
311 parser.add_option("-i", "--input", default="",
312 help="Read stdin from a file.")
313 parser.add_option("--output", default="",
314 help="Redirect stdout to a file.")
315 parser.add_option("--errout", default="",
316 help="Redirect stderr to a file.")
317
318def addFSOptions(parser):
319 from FSConfig import os_types
320
321 # Simulation options
322 parser.add_option("--timesync", action="store_true",
323 help="Prevent simulated time from getting ahead of real time")
324
325 # System options
326 parser.add_option("--kernel", action="store", type="string")
327 parser.add_option("--os-type", action="store", type="choice",
328 choices=os_types[buildEnv['TARGET_ISA']], default="linux",
329 help="Specifies type of OS to boot")
330 parser.add_option("--script", action="store", type="string")
331 parser.add_option("--frame-capture", action="store_true",
332 help="Stores changed frame buffers from the VNC server to compressed "\
333 "files in the gem5 output directory")
334
335 if buildEnv['TARGET_ISA'] == "arm":
336 parser.add_option("--bare-metal", action="store_true",
337 help="Provide the raw system without the linux specific bits")
338 parser.add_option("--list-machine-types",
339 action="callback", callback=_listPlatformTypes,
340 help="List available platform types")
341 parser.add_option("--machine-type", action="store", type="choice",
342 choices=PlatformConfig.platform_names(),
343 default="VExpress_EMM")
344 parser.add_option("--dtb-filename", action="store", type="string",
345 help="Specifies device tree blob file to use with device-tree-"\
346 "enabled kernels")
347 parser.add_option("--enable-security-extensions", action="store_true",
348 help="Turn on the ARM Security Extensions")
349 parser.add_option("--enable-context-switch-stats-dump", \
350 action="store_true", help="Enable stats dump at context "\
351 "switches and dump tasks file (required for Streamline)")
352 parser.add_option("--generate-dtb", action="store_true", default=False,
353 help="Automatically generate a dtb file")
354
355 # Benchmark options
356 parser.add_option("--dual", action="store_true",
357 help="Simulate two systems attached with an ethernet link")
358 parser.add_option("-b", "--benchmark", action="store", type="string",
359 dest="benchmark",
360 help="Specify the benchmark to run. Available benchmarks: %s"\
361 % DefinedBenchmarks)
362
363 # Metafile options
364 parser.add_option("--etherdump", action="store", type="string", dest="etherdump",
365 help="Specify the filename to dump a pcap capture of the" \
366 "ethernet traffic")
367
368 # Disk Image Options
369 parser.add_option("--disk-image", action="store", type="string", default=None,
370 help="Path to the disk image to use.")
371 parser.add_option("--root-device", action="store", type="string", default=None,
372 help="OS device name for root partition")
373
374 # Command line options
375 parser.add_option("--command-line", action="store", type="string",
376 default=None,
377 help="Template for the kernel command line.")
378 parser.add_option("--command-line-file", action="store",
379 default=None, type="string",
380 help="File with a template for the kernel command line")