1# Copyright (c) 2012-2013 ARM Limited 2# All rights reserved. 3# 4# The license below extends only to copyright in the software and shall 5# not be construed as granting a license to any other intellectual 6# property including but not limited to intellectual property relating 7# to a hardware implementation of the functionality of the software 8# licensed hereunder. You may use the software subject to the license --- 108 unchanged lines hidden (view full) --- 117# connected.Through each crossbar only local vaults can be accessed. But to 118# support this architecture we need a crossbar between serial links and 119# processor. 120# 121# mixed: This is a hybrid architecture. It has 4 crossbars inside the HMC. 122# 2 Crossbars are connected to only local vaults. From other 2 crossbar, a 123# request can be forwarded to any other vault. 124 |
125import argparse |
126 127import m5 128from m5.objects import * |
129from m5.util import * |
130 |
131 132def add_options(parser): 133 # *****************************CROSSBAR PARAMETERS************************* |
134 # Flit size of the main interconnect [1] |
135 parser.add_argument("--xbar-width", default=32, action="store", type=int, 136 help="Data width of the main XBar (Bytes)") |
137 138 # Clock frequency of the main interconnect [1] 139 # This crossbar, is placed on the logic-based of the HMC and it has its 140 # own voltage and clock domains, different from the DRAM dies or from the 141 # host. |
142 parser.add_argument("--xbar-frequency", default='1GHz', type=str, 143 help="Clock Frequency of the main XBar") |
144 145 # Arbitration latency of the HMC XBar [1] |
146 parser.add_argument("--xbar-frontend-latency", default=1, action="store", 147 type=int, help="Arbitration latency of the XBar") |
148 149 # Latency to forward a packet via the interconnect [1](two levels of FIFOs 150 # at the input and output of the inteconnect) |
151 parser.add_argument("--xbar-forward-latency", default=2, action="store", 152 type=int, help="Forward latency of the XBar") |
153 154 # Latency to forward a response via the interconnect [1](two levels of 155 # FIFOs at the input and output of the inteconnect) |
156 parser.add_argument("--xbar-response-latency", default=2, action="store", 157 type=int, help="Response latency of the XBar") |
158 159 # number of cross which connects 16 Vaults to serial link[7] |
160 parser.add_argument("--number-mem-crossbar", default=4, action="store", 161 type=int, help="Number of crossbar in HMC") |
162 |
163 # *****************************SERIAL LINK PARAMETERS********************** |
164 # Number of serial links controllers [1] |
165 parser.add_argument("--num-links-controllers", default=4, action="store", 166 type=int, help="Number of serial links") |
167 168 # Number of packets (not flits) to store at the request side of the serial 169 # link. This number should be adjusted to achive required bandwidth |
170 parser.add_argument("--link-buffer-size-req", default=10, action="store", 171 type=int, help="Number of packets to buffer at the\ 172 request side of the serial link") |
173 174 # Number of packets (not flits) to store at the response side of the serial 175 # link. This number should be adjusted to achive required bandwidth |
176 parser.add_argument("--link-buffer-size-rsp", default=10, action="store", 177 type=int, help="Number of packets to buffer at the\ 178 response side of the serial link") |
179 180 # Latency of the serial link composed by SER/DES latency (1.6ns [4]) plus 181 # the PCB trace latency (3ns Estimated based on [5]) |
182 parser.add_argument("--link-latency", default='4.6ns', type=str, 183 help="Latency of the serial links") |
184 185 # Clock frequency of the each serial link(SerDes) [1] |
186 parser.add_argument("--link-frequency", default='10GHz', type=str, 187 help="Clock Frequency of the serial links") |
188 189 # Clock frequency of serial link Controller[6] 190 # clk_hmc[Mhz]= num_lanes_per_link * lane_speed [Gbits/s] / 191 # data_path_width * 10^6 192 # clk_hmc[Mhz]= 16 * 10 Gbps / 256 * 10^6 = 625 Mhz |
193 parser.add_argument("--link-controller-frequency", default='625MHz', 194 type=str, help="Clock Frequency of the link\ 195 controller") |
196 197 # Latency of the serial link controller to process the packets[1][6] 198 # (ClockDomain = 625 Mhz ) 199 # used here for calculations only |
200 parser.add_argument("--link-ctrl-latency", default=4, action="store", 201 type=int, help="The number of cycles required for the\ 202 controller to process the packet") |
203 204 # total_ctrl_latency = link_ctrl_latency + link_latency 205 # total_ctrl_latency = 4(Cycles) * 1.6 ns + 4.6 ns |
206 parser.add_argument("--total-ctrl-latency", default='11ns', type=str, 207 help="The latency experienced by every packet\ 208 regardless of size of packet") |
209 210 # Number of parallel lanes in each serial link [1] |
211 parser.add_argument("--num-lanes-per-link", default=16, action="store", 212 type=int, help="Number of lanes per each link") |
213 214 # Number of serial links [1] |
215 parser.add_argument("--num-serial-links", default=4, action="store", 216 type=int, help="Number of serial links") |
217 218 # speed of each lane of serial link - SerDes serial interface 10 Gb/s |
219 parser.add_argument("--serial-link-speed", default=10, action="store", 220 type=int, help="Gbs/s speed of each lane of serial\ 221 link") |
222 |
223 # address range for each of the serial links 224 parser.add_argument("--serial-link-addr-range", default='1GB', type=str, 225 help="memory range for each of the serial links.\ 226 Default: 1GB") 227 228 # *****************************PERFORMANCE MONITORING********************* |
229 # The main monitor behind the HMC Controller |
230 parser.add_argument("--enable-global-monitor", action="store_true", 231 help="The main monitor behind the HMC Controller") |
232 233 # The link performance monitors |
234 parser.add_argument("--enable-link-monitor", action="store_true", 235 help="The link monitors") |
236 237 # link aggregator enable - put a cross between buffers & links |
238 parser.add_argument("--enable-link-aggr", action="store_true", help="The\ 239 crossbar between port and Link Controller") |
240 |
241 parser.add_argument("--enable-buff-div", action="store_true", 242 help="Memory Range of Buffer is ivided between total\ 243 range") |
244 |
245 # *****************************HMC ARCHITECTURE ************************** |
246 # Memory chunk for 16 vault - numbers of vault / number of crossbars |
247 parser.add_argument("--mem-chunk", default=4, action="store", type=int, 248 help="Chunk of memory range for each cross bar in\ 249 arch 0") |
250 251 # size of req buffer within crossbar, used for modelling extra latency 252 # when the reuqest go to non-local vault |
253 parser.add_argument("--xbar-buffer-size-req", default=10, action="store", 254 type=int, help="Number of packets to buffer at the\ 255 request side of the crossbar") |
256 257 # size of response buffer within crossbar, used for modelling extra latency 258 # when the response received from non-local vault |
259 parser.add_argument("--xbar-buffer-size-resp", default=10, action="store", 260 type=int, help="Number of packets to buffer at the\ 261 response side of the crossbar") 262 # HMC device architecture. It affects the HMC host controller as well 263 parser.add_argument("--arch", type=str, choices=["same", "distributed", 264 "mixed"], default="distributed", help="same: HMC with\ 265 4 links, all with same range.\ndistributed: HMC with\ 266 4 links with distributed range.\nmixed: mixed with\ 267 same and distributed range.\nDefault: distributed") 268 # HMC device - number of vaults 269 parser.add_argument("--hmc-dev-num-vaults", default=16, action="store", 270 type=int, help="number of independent vaults within\ 271 the HMC device. Note: each vault has a memory\ 272 controller (valut controller)\nDefault: 16") 273 # HMC device - vault capacity or size 274 parser.add_argument("--hmc-dev-vault-size", default='256MB', type=str, 275 help="vault storage capacity in bytes. Default:\ 276 256MB") 277 parser.add_argument("--mem-type", type=str, choices=["HMC_2500_1x32"], 278 default="HMC_2500_1x32", help="type of HMC memory to\ 279 use. Default: HMC_2500_1x32") 280 parser.add_argument("--mem-channels", default=1, action="store", type=int, 281 help="Number of memory channels") 282 parser.add_argument("--mem-ranks", default=1, action="store", type=int, 283 help="Number of ranks to iterate across") 284 parser.add_argument("--burst-length", default=256, action="store", 285 type=int, help="burst length in bytes. Note: the\ 286 cache line size will be set to this value.\nDefault:\ 287 256") |
288 |
289 |
290# configure HMC host controller 291def config_hmc_host_ctrl(opt, system): |
292 |
293 # create HMC host controller 294 system.hmc_host = SubSystem() |
295 |
296 # Create additional crossbar for arch1 297 if opt.arch == "distributed" or opt.arch == "mixed": 298 clk = '100GHz' 299 vd = VoltageDomain(voltage='1V') 300 # Create additional crossbar for arch1 301 system.membus = NoncoherentXBar(width=8) 302 system.membus.badaddr_responder = BadAddr() 303 system.membus.default = Self.badaddr_responder.pio 304 system.membus.width = 8 305 system.membus.frontend_latency = 3 306 system.membus.forward_latency = 4 307 system.membus.response_latency = 2 308 cd = SrcClockDomain(clock=clk, voltage_domain=vd) 309 system.membus.clk_domain = cd |
310 |
311 # create memory ranges for the serial links 312 slar = convert.toMemorySize(opt.serial_link_addr_range) 313 # Memmory ranges of serial link for arch-0. Same as the ranges of vault 314 # controllers (4 vaults to 1 serial link) 315 if opt.arch == "same": 316 ser_ranges = [AddrRange(0, (4*slar)-1) for i in 317 range(opt.num_serial_links)] 318 # Memmory ranges of serial link for arch-1. Distributed range accross 319 # links 320 if opt.arch == "distributed": 321 ser_ranges = [AddrRange(i*slar, ((i+1)*slar)-1) for i in 322 range(opt.num_serial_links)] 323 # Memmory ranges of serial link for arch-2 'Mixed' address distribution 324 # over links 325 if opt.arch == "mixed": 326 ser_range0 = AddrRange(0, (1*slar)-1) 327 ser_range1 = AddrRange(1*slar, 2*slar-1) 328 ser_range2 = AddrRange(0, (4*slar)-1) 329 ser_range3 = AddrRange(0, (4*slar)-1) 330 ser_ranges = [ser_range0, ser_range1, ser_range2, ser_range3] |
331 |
332 # Serial link Controller with 16 SerDes links at 10 Gbps with serial link 333 # ranges w.r.t to architecture 334 sl = [SerialLink(ranges=ser_ranges[i], 335 req_size=opt.link_buffer_size_req, 336 resp_size=opt.link_buffer_size_rsp, 337 num_lanes=opt.num_lanes_per_link, 338 link_speed=opt.serial_link_speed, 339 delay=opt.total_ctrl_latency) for i in 340 xrange(opt.num_serial_links)] 341 system.hmc_host.seriallink = sl 342 |
343 # enable global monitor |
344 if opt.enable_global_monitor: 345 system.hmc_host.lmonitor = [CommMonitor() for i in 346 xrange(opt.num_serial_links)] |
347 348 # set the clock frequency for serial link |
349 for i in xrange(opt.num_serial_links): 350 clk = opt.link_controller_frequency 351 vd = VoltageDomain(voltage='1V') 352 scd = SrcClockDomain(clock=clk, voltage_domain=vd) 353 system.hmc_host.seriallink[i].clk_domain = scd |
354 355 # Connect membus/traffic gen to Serial Link Controller for differrent HMC 356 # architectures |
357 hh = system.hmc_host 358 if opt.arch == "distributed": 359 mb = system.membus 360 for i in xrange(opt.num_links_controllers): 361 if opt.enable_global_monitor: 362 mb.master = hh.lmonitor[i].slave 363 hh.lmonitor[i].master = hh.seriallink[i].slave |
364 else: |
365 mb.master = hh.seriallink[i].slave 366 if opt.arch == "mixed": 367 mb = system.membus 368 if opt.enable_global_monitor: 369 mb.master = hh.lmonitor[0].slave 370 hh.lmonitor[0].master = hh.seriallink[0].slave 371 mb.master = hh.lmonitor[1].slave 372 hh.lmonitor[1].master = hh.seriallink[1].slave |
373 else: |
374 mb.master = hh.seriallink[0].slave 375 mb.master = hh.seriallink[1].slave |
376 |
377 if opt.arch == "same": 378 for i in xrange(opt.num_links_controllers): 379 if opt.enable_global_monitor: 380 hh.lmonitor[i].master = hh.seriallink[i].slave 381 |
382 return system 383 |
384 |
385# Create an HMC device 386def config_hmc_dev(opt, system, hmc_host): |
387 |
388 # create HMC device 389 system.hmc_dev = SubSystem() |
390 |
391 # create memory ranges for the vault controllers 392 arv = convert.toMemorySize(opt.hmc_dev_vault_size) 393 addr_ranges_vaults = [AddrRange(i*arv, ((i+1)*arv-1)) for i in 394 range(opt.hmc_dev_num_vaults)] 395 system.mem_ranges = addr_ranges_vaults |
396 |
397 if opt.enable_link_monitor: 398 lm = [CommMonitor() for i in xrange(opt.num_links_controllers)] 399 system.hmc_dev.lmonitor = lm |
400 |
401 # 4 HMC Crossbars located in its logic-base (LoB) |
402 xb = [NoncoherentXBar(width=opt.xbar_width, 403 frontend_latency=opt.xbar_frontend_latency, 404 forward_latency=opt.xbar_forward_latency, 405 response_latency=opt.xbar_response_latency) for i in 406 xrange(opt.number_mem_crossbar)] 407 system.hmc_dev.xbar = xb |
408 |
409 for i in xrange(opt.number_mem_crossbar): 410 clk = opt.xbar_frequency 411 vd = VoltageDomain(voltage='1V') 412 scd = SrcClockDomain(clock=clk, voltage_domain=vd) 413 system.hmc_dev.xbar[i].clk_domain = scd |
414 415 # Attach 4 serial link to 4 crossbar/s |
416 for i in xrange(opt.num_serial_links): 417 if opt.enable_link_monitor: |
418 system.hmc_host.seriallink[i].master = \ 419 system.hmc_dev.lmonitor[i].slave 420 system.hmc_dev.lmonitor[i].master = system.hmc_dev.xbar[i].slave 421 else: 422 system.hmc_host.seriallink[i].master = system.hmc_dev.xbar[i].slave 423 424 # Connecting xbar with each other for request arriving at the wrong xbar, 425 # then it will be forward to correct xbar. Bridge is used to connect xbars |
426 if opt.arch == "same": |
427 numx = len(system.hmc_dev.xbar) 428 429 # create a list of buffers |
430 system.hmc_dev.buffers = [Bridge(req_size=opt.xbar_buffer_size_req, 431 resp_size=opt.xbar_buffer_size_resp) 432 for i in xrange(numx*(opt.mem_chunk-1))] |
433 434 # Buffer iterator 435 it = iter(range(len(system.hmc_dev.buffers))) 436 437 # necesarry to add system_port to one of the xbar 438 system.system_port = system.hmc_dev.xbar[3].slave 439 440 # iterate over all the crossbars and connect them as required 441 for i in range(numx): 442 for j in range(numx): 443 # connect xbar to all other xbars except itself 444 if i != j: 445 # get the next index of buffer 446 index = it.next() 447 448 # Change the default values for ranges of bridge 449 system.hmc_dev.buffers[index].ranges = system.mem_ranges[ |
450 j * int(opt.mem_chunk): 451 (j + 1) * int(opt.mem_chunk)] |
452 453 # Connect the bridge between corssbars 454 system.hmc_dev.xbar[i].master = system.hmc_dev.buffers[ 455 index].slave 456 system.hmc_dev.buffers[ 457 index].master = system.hmc_dev.xbar[j].slave 458 else: 459 # Don't connect the xbar to itself 460 pass 461 462 # Two crossbars are connected to all other crossbars-Other 2 vault 463 # can only direct traffic to it local vaults |
464 if opt.arch == "mixed": |
465 system.hmc_dev.buffer30 = Bridge(ranges=system.mem_ranges[0:4]) 466 system.hmc_dev.xbar[3].master = system.hmc_dev.buffer30.slave 467 system.hmc_dev.buffer30.master = system.hmc_dev.xbar[0].slave 468 469 system.hmc_dev.buffer31 = Bridge(ranges=system.mem_ranges[4:8]) 470 system.hmc_dev.xbar[3].master = system.hmc_dev.buffer31.slave 471 system.hmc_dev.buffer31.master = system.hmc_dev.xbar[1].slave 472 473 system.hmc_dev.buffer32 = Bridge(ranges=system.mem_ranges[8:12]) 474 system.hmc_dev.xbar[3].master = system.hmc_dev.buffer32.slave 475 system.hmc_dev.buffer32.master = system.hmc_dev.xbar[2].slave 476 |
477 system.hmc_dev.buffer20 = Bridge(ranges=system.mem_ranges[0:4]) 478 system.hmc_dev.xbar[2].master = system.hmc_dev.buffer20.slave 479 system.hmc_dev.buffer20.master = system.hmc_dev.xbar[0].slave 480 481 system.hmc_dev.buffer21 = Bridge(ranges=system.mem_ranges[4:8]) 482 system.hmc_dev.xbar[2].master = system.hmc_dev.buffer21.slave 483 system.hmc_dev.buffer21.master = system.hmc_dev.xbar[1].slave 484 485 system.hmc_dev.buffer23 = Bridge(ranges=system.mem_ranges[12:16]) 486 system.hmc_dev.xbar[2].master = system.hmc_dev.buffer23.slave 487 system.hmc_dev.buffer23.master = system.hmc_dev.xbar[3].slave |