4# All rights reserved. 5# 6# The license below extends only to copyright in the software and shall 7# not be construed as granting a license to any other intellectual 8# property including but not limited to intellectual property relating 9# to a hardware implementation of the functionality of the software 10# licensed hereunder. You may use the software subject to the license 11# terms below provided that you ensure that this notice is replicated 12# unmodified and in its entirety in all distributions of the software, 13# modified or unmodified, in source code or in binary form. 14# 15# Copyright (c) 2011 Advanced Micro Devices, Inc. 16# Copyright (c) 2009 The Hewlett-Packard Development Company 17# Copyright (c) 2004-2005 The Regents of The University of Michigan 18# All rights reserved. 19# 20# Redistribution and use in source and binary forms, with or without 21# modification, are permitted provided that the following conditions are 22# met: redistributions of source code must retain the above copyright 23# notice, this list of conditions and the following disclaimer; 24# redistributions in binary form must reproduce the above copyright 25# notice, this list of conditions and the following disclaimer in the 26# documentation and/or other materials provided with the distribution; 27# neither the name of the copyright holders nor the names of its 28# contributors may be used to endorse or promote products derived from 29# this software without specific prior written permission. 30# 31# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 34# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 36# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 37# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 38# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 39# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 40# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 41# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 42# 43# Authors: Steve Reinhardt 44# Nathan Binkert 45 46################################################### 47# 48# SCons top-level build description (SConstruct) file. 49# 50# While in this directory ('gem5'), just type 'scons' to build the default 51# configuration (see below), or type 'scons build/<CONFIG>/<binary>' 52# to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for 53# the optimized full-system version). 54# 55# You can build gem5 in a different directory as long as there is a 56# 'build/<CONFIG>' somewhere along the target path. The build system 57# expects that all configs under the same build directory are being 58# built for the same host system. 59# 60# Examples: 61# 62# The following two commands are equivalent. The '-u' option tells 63# scons to search up the directory tree for this SConstruct file. 64# % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug 65# % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug 66# 67# The following two commands are equivalent and demonstrate building 68# in a directory outside of the source tree. The '-C' option tells 69# scons to chdir to the specified directory to find this SConstruct 70# file. 71# % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug 72# % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug 73# 74# You can use 'scons -H' to print scons options. If you're in this 75# 'gem5' directory (or use -u or -C to tell scons where to find this 76# file), you can use 'scons -h' to print all the gem5-specific build 77# options as well. 78# 79################################################### 80 81from __future__ import print_function 82 83# Global Python includes 84import itertools 85import os 86import re 87import shutil 88import subprocess 89import sys 90 91from os import mkdir, environ 92from os.path import abspath, basename, dirname, expanduser, normpath 93from os.path import exists, isdir, isfile 94from os.path import join as joinpath, split as splitpath 95from re import match 96 97# SCons includes 98import SCons 99import SCons.Node 100import SCons.Node.FS 101 102from m5.util import compareVersions, readCommand 103 104help_texts = { 105 "options" : "", 106 "global_vars" : "", 107 "local_vars" : "" 108} 109 110Export("help_texts") 111 112 113# There's a bug in scons in that (1) by default, the help texts from 114# AddOption() are supposed to be displayed when you type 'scons -h' 115# and (2) you can override the help displayed by 'scons -h' using the 116# Help() function, but these two features are incompatible: once 117# you've overridden the help text using Help(), there's no way to get 118# at the help texts from AddOptions. See: 119# http://scons.tigris.org/issues/show_bug.cgi?id=2356 120# http://scons.tigris.org/issues/show_bug.cgi?id=2611 121# This hack lets us extract the help text from AddOptions and 122# re-inject it via Help(). Ideally someday this bug will be fixed and 123# we can just use AddOption directly. 124def AddLocalOption(*args, **kwargs): 125 col_width = 30 126 127 help = " " + ", ".join(args) 128 if "help" in kwargs: 129 length = len(help) 130 if length >= col_width: 131 help += "\n" + " " * col_width 132 else: 133 help += " " * (col_width - length) 134 help += kwargs["help"] 135 help_texts["options"] += help + "\n" 136 137 AddOption(*args, **kwargs) 138 139AddLocalOption('--colors', dest='use_colors', action='store_true', 140 help="Add color to abbreviated scons output") 141AddLocalOption('--no-colors', dest='use_colors', action='store_false', 142 help="Don't add color to abbreviated scons output") 143AddLocalOption('--with-cxx-config', dest='with_cxx_config', 144 action='store_true', 145 help="Build with support for C++-based configuration") 146AddLocalOption('--default', dest='default', type='string', action='store', 147 help='Override which build_opts file to use for defaults') 148AddLocalOption('--ignore-style', dest='ignore_style', action='store_true', 149 help='Disable style checking hooks') 150AddLocalOption('--gold-linker', dest='gold_linker', action='store_true', 151 help='Use the gold linker') 152AddLocalOption('--no-lto', dest='no_lto', action='store_true', 153 help='Disable Link-Time Optimization for fast') 154AddLocalOption('--force-lto', dest='force_lto', action='store_true', 155 help='Use Link-Time Optimization instead of partial linking' + 156 ' when the compiler doesn\'t support using them together.') 157AddLocalOption('--update-ref', dest='update_ref', action='store_true', 158 help='Update test reference outputs') 159AddLocalOption('--verbose', dest='verbose', action='store_true', 160 help='Print full tool command lines') 161AddLocalOption('--without-python', dest='without_python', 162 action='store_true', 163 help='Build without Python configuration support') 164AddLocalOption('--without-tcmalloc', dest='without_tcmalloc', 165 action='store_true', 166 help='Disable linking against tcmalloc') 167AddLocalOption('--with-ubsan', dest='with_ubsan', action='store_true', 168 help='Build with Undefined Behavior Sanitizer if available') 169AddLocalOption('--with-asan', dest='with_asan', action='store_true', 170 help='Build with Address Sanitizer if available') 171 172if GetOption('no_lto') and GetOption('force_lto'): 173 print('--no-lto and --force-lto are mutually exclusive') 174 Exit(1) 175 176######################################################################## 177# 178# Set up the main build environment. 179# 180######################################################################## 181 182main = Environment() 183 184from gem5_scons import Transform 185from gem5_scons.util import get_termcap 186termcap = get_termcap() 187 188main_dict_keys = main.Dictionary().keys() 189 190# Check that we have a C/C++ compiler 191if not ('CC' in main_dict_keys and 'CXX' in main_dict_keys): 192 print("No C++ compiler installed (package g++ on Ubuntu and RedHat)") 193 Exit(1) 194 195################################################### 196# 197# Figure out which configurations to set up based on the path(s) of 198# the target(s). 199# 200################################################### 201 202# Find default configuration & binary. 203Default(environ.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug')) 204 205# helper function: find last occurrence of element in list 206def rfind(l, elt, offs = -1): 207 for i in range(len(l)+offs, 0, -1): 208 if l[i] == elt: 209 return i 210 raise ValueError, "element not found" 211 212# Take a list of paths (or SCons Nodes) and return a list with all 213# paths made absolute and ~-expanded. Paths will be interpreted 214# relative to the launch directory unless a different root is provided 215def makePathListAbsolute(path_list, root=GetLaunchDir()): 216 return [abspath(joinpath(root, expanduser(str(p)))) 217 for p in path_list] 218 219def find_first_prog(prog_names): 220 """Find the absolute path to the first existing binary in prog_names""" 221 222 if not isinstance(prog_names, (list, tuple)): 223 prog_names = [ prog_names ] 224 225 for p in prog_names: 226 p = main.WhereIs(p) 227 if p is not None: 228 return p 229 230 return None 231 232# Each target must have 'build' in the interior of the path; the 233# directory below this will determine the build parameters. For 234# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we 235# recognize that ALPHA_SE specifies the configuration because it 236# follow 'build' in the build path. 237 238# The funky assignment to "[:]" is needed to replace the list contents 239# in place rather than reassign the symbol to a new list, which 240# doesn't work (obviously!). 241BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS) 242 243# Generate a list of the unique build roots and configs that the 244# collected targets reference. 245variant_paths = [] 246build_root = None 247for t in BUILD_TARGETS: 248 path_dirs = t.split('/') 249 try: 250 build_top = rfind(path_dirs, 'build', -2) 251 except: 252 print("Error: no non-leaf 'build' dir found on target path", t) 253 Exit(1) 254 this_build_root = joinpath('/',*path_dirs[:build_top+1]) 255 if not build_root: 256 build_root = this_build_root 257 else: 258 if this_build_root != build_root: 259 print("Error: build targets not under same build root\n" 260 " %s\n %s" % (build_root, this_build_root)) 261 Exit(1) 262 variant_path = joinpath('/',*path_dirs[:build_top+2]) 263 if variant_path not in variant_paths: 264 variant_paths.append(variant_path) 265 266# Make sure build_root exists (might not if this is the first build there) 267if not isdir(build_root): 268 mkdir(build_root) 269main['BUILDROOT'] = build_root 270 271Export('main') 272 273main.SConsignFile(joinpath(build_root, "sconsign")) 274 275# Default duplicate option is to use hard links, but this messes up 276# when you use emacs to edit a file in the target dir, as emacs moves 277# file to file~ then copies to file, breaking the link. Symbolic 278# (soft) links work better. 279main.SetOption('duplicate', 'soft-copy') 280 281# 282# Set up global sticky variables... these are common to an entire build 283# tree (not specific to a particular build like ALPHA_SE) 284# 285 286global_vars_file = joinpath(build_root, 'variables.global') 287 288global_vars = Variables(global_vars_file, args=ARGUMENTS) 289 290global_vars.AddVariables( 291 ('CC', 'C compiler', environ.get('CC', main['CC'])), 292 ('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])),
| 4# All rights reserved. 5# 6# The license below extends only to copyright in the software and shall 7# not be construed as granting a license to any other intellectual 8# property including but not limited to intellectual property relating 9# to a hardware implementation of the functionality of the software 10# licensed hereunder. You may use the software subject to the license 11# terms below provided that you ensure that this notice is replicated 12# unmodified and in its entirety in all distributions of the software, 13# modified or unmodified, in source code or in binary form. 14# 15# Copyright (c) 2011 Advanced Micro Devices, Inc. 16# Copyright (c) 2009 The Hewlett-Packard Development Company 17# Copyright (c) 2004-2005 The Regents of The University of Michigan 18# All rights reserved. 19# 20# Redistribution and use in source and binary forms, with or without 21# modification, are permitted provided that the following conditions are 22# met: redistributions of source code must retain the above copyright 23# notice, this list of conditions and the following disclaimer; 24# redistributions in binary form must reproduce the above copyright 25# notice, this list of conditions and the following disclaimer in the 26# documentation and/or other materials provided with the distribution; 27# neither the name of the copyright holders nor the names of its 28# contributors may be used to endorse or promote products derived from 29# this software without specific prior written permission. 30# 31# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 34# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 36# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 37# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 38# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 39# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 40# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 41# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 42# 43# Authors: Steve Reinhardt 44# Nathan Binkert 45 46################################################### 47# 48# SCons top-level build description (SConstruct) file. 49# 50# While in this directory ('gem5'), just type 'scons' to build the default 51# configuration (see below), or type 'scons build/<CONFIG>/<binary>' 52# to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for 53# the optimized full-system version). 54# 55# You can build gem5 in a different directory as long as there is a 56# 'build/<CONFIG>' somewhere along the target path. The build system 57# expects that all configs under the same build directory are being 58# built for the same host system. 59# 60# Examples: 61# 62# The following two commands are equivalent. The '-u' option tells 63# scons to search up the directory tree for this SConstruct file. 64# % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug 65# % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug 66# 67# The following two commands are equivalent and demonstrate building 68# in a directory outside of the source tree. The '-C' option tells 69# scons to chdir to the specified directory to find this SConstruct 70# file. 71# % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug 72# % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug 73# 74# You can use 'scons -H' to print scons options. If you're in this 75# 'gem5' directory (or use -u or -C to tell scons where to find this 76# file), you can use 'scons -h' to print all the gem5-specific build 77# options as well. 78# 79################################################### 80 81from __future__ import print_function 82 83# Global Python includes 84import itertools 85import os 86import re 87import shutil 88import subprocess 89import sys 90 91from os import mkdir, environ 92from os.path import abspath, basename, dirname, expanduser, normpath 93from os.path import exists, isdir, isfile 94from os.path import join as joinpath, split as splitpath 95from re import match 96 97# SCons includes 98import SCons 99import SCons.Node 100import SCons.Node.FS 101 102from m5.util import compareVersions, readCommand 103 104help_texts = { 105 "options" : "", 106 "global_vars" : "", 107 "local_vars" : "" 108} 109 110Export("help_texts") 111 112 113# There's a bug in scons in that (1) by default, the help texts from 114# AddOption() are supposed to be displayed when you type 'scons -h' 115# and (2) you can override the help displayed by 'scons -h' using the 116# Help() function, but these two features are incompatible: once 117# you've overridden the help text using Help(), there's no way to get 118# at the help texts from AddOptions. See: 119# http://scons.tigris.org/issues/show_bug.cgi?id=2356 120# http://scons.tigris.org/issues/show_bug.cgi?id=2611 121# This hack lets us extract the help text from AddOptions and 122# re-inject it via Help(). Ideally someday this bug will be fixed and 123# we can just use AddOption directly. 124def AddLocalOption(*args, **kwargs): 125 col_width = 30 126 127 help = " " + ", ".join(args) 128 if "help" in kwargs: 129 length = len(help) 130 if length >= col_width: 131 help += "\n" + " " * col_width 132 else: 133 help += " " * (col_width - length) 134 help += kwargs["help"] 135 help_texts["options"] += help + "\n" 136 137 AddOption(*args, **kwargs) 138 139AddLocalOption('--colors', dest='use_colors', action='store_true', 140 help="Add color to abbreviated scons output") 141AddLocalOption('--no-colors', dest='use_colors', action='store_false', 142 help="Don't add color to abbreviated scons output") 143AddLocalOption('--with-cxx-config', dest='with_cxx_config', 144 action='store_true', 145 help="Build with support for C++-based configuration") 146AddLocalOption('--default', dest='default', type='string', action='store', 147 help='Override which build_opts file to use for defaults') 148AddLocalOption('--ignore-style', dest='ignore_style', action='store_true', 149 help='Disable style checking hooks') 150AddLocalOption('--gold-linker', dest='gold_linker', action='store_true', 151 help='Use the gold linker') 152AddLocalOption('--no-lto', dest='no_lto', action='store_true', 153 help='Disable Link-Time Optimization for fast') 154AddLocalOption('--force-lto', dest='force_lto', action='store_true', 155 help='Use Link-Time Optimization instead of partial linking' + 156 ' when the compiler doesn\'t support using them together.') 157AddLocalOption('--update-ref', dest='update_ref', action='store_true', 158 help='Update test reference outputs') 159AddLocalOption('--verbose', dest='verbose', action='store_true', 160 help='Print full tool command lines') 161AddLocalOption('--without-python', dest='without_python', 162 action='store_true', 163 help='Build without Python configuration support') 164AddLocalOption('--without-tcmalloc', dest='without_tcmalloc', 165 action='store_true', 166 help='Disable linking against tcmalloc') 167AddLocalOption('--with-ubsan', dest='with_ubsan', action='store_true', 168 help='Build with Undefined Behavior Sanitizer if available') 169AddLocalOption('--with-asan', dest='with_asan', action='store_true', 170 help='Build with Address Sanitizer if available') 171 172if GetOption('no_lto') and GetOption('force_lto'): 173 print('--no-lto and --force-lto are mutually exclusive') 174 Exit(1) 175 176######################################################################## 177# 178# Set up the main build environment. 179# 180######################################################################## 181 182main = Environment() 183 184from gem5_scons import Transform 185from gem5_scons.util import get_termcap 186termcap = get_termcap() 187 188main_dict_keys = main.Dictionary().keys() 189 190# Check that we have a C/C++ compiler 191if not ('CC' in main_dict_keys and 'CXX' in main_dict_keys): 192 print("No C++ compiler installed (package g++ on Ubuntu and RedHat)") 193 Exit(1) 194 195################################################### 196# 197# Figure out which configurations to set up based on the path(s) of 198# the target(s). 199# 200################################################### 201 202# Find default configuration & binary. 203Default(environ.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug')) 204 205# helper function: find last occurrence of element in list 206def rfind(l, elt, offs = -1): 207 for i in range(len(l)+offs, 0, -1): 208 if l[i] == elt: 209 return i 210 raise ValueError, "element not found" 211 212# Take a list of paths (or SCons Nodes) and return a list with all 213# paths made absolute and ~-expanded. Paths will be interpreted 214# relative to the launch directory unless a different root is provided 215def makePathListAbsolute(path_list, root=GetLaunchDir()): 216 return [abspath(joinpath(root, expanduser(str(p)))) 217 for p in path_list] 218 219def find_first_prog(prog_names): 220 """Find the absolute path to the first existing binary in prog_names""" 221 222 if not isinstance(prog_names, (list, tuple)): 223 prog_names = [ prog_names ] 224 225 for p in prog_names: 226 p = main.WhereIs(p) 227 if p is not None: 228 return p 229 230 return None 231 232# Each target must have 'build' in the interior of the path; the 233# directory below this will determine the build parameters. For 234# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we 235# recognize that ALPHA_SE specifies the configuration because it 236# follow 'build' in the build path. 237 238# The funky assignment to "[:]" is needed to replace the list contents 239# in place rather than reassign the symbol to a new list, which 240# doesn't work (obviously!). 241BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS) 242 243# Generate a list of the unique build roots and configs that the 244# collected targets reference. 245variant_paths = [] 246build_root = None 247for t in BUILD_TARGETS: 248 path_dirs = t.split('/') 249 try: 250 build_top = rfind(path_dirs, 'build', -2) 251 except: 252 print("Error: no non-leaf 'build' dir found on target path", t) 253 Exit(1) 254 this_build_root = joinpath('/',*path_dirs[:build_top+1]) 255 if not build_root: 256 build_root = this_build_root 257 else: 258 if this_build_root != build_root: 259 print("Error: build targets not under same build root\n" 260 " %s\n %s" % (build_root, this_build_root)) 261 Exit(1) 262 variant_path = joinpath('/',*path_dirs[:build_top+2]) 263 if variant_path not in variant_paths: 264 variant_paths.append(variant_path) 265 266# Make sure build_root exists (might not if this is the first build there) 267if not isdir(build_root): 268 mkdir(build_root) 269main['BUILDROOT'] = build_root 270 271Export('main') 272 273main.SConsignFile(joinpath(build_root, "sconsign")) 274 275# Default duplicate option is to use hard links, but this messes up 276# when you use emacs to edit a file in the target dir, as emacs moves 277# file to file~ then copies to file, breaking the link. Symbolic 278# (soft) links work better. 279main.SetOption('duplicate', 'soft-copy') 280 281# 282# Set up global sticky variables... these are common to an entire build 283# tree (not specific to a particular build like ALPHA_SE) 284# 285 286global_vars_file = joinpath(build_root, 'variables.global') 287 288global_vars = Variables(global_vars_file, args=ARGUMENTS) 289 290global_vars.AddVariables( 291 ('CC', 'C compiler', environ.get('CC', main['CC'])), 292 ('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])),
|
293 ('PYTHON_CONFIG', 'Python config binary to use', 294 [ 'python2.7-config', 'python-config' ]), 295 ('PROTOC', 'protoc tool', environ.get('PROTOC', 'protoc')), 296 ('BATCH', 'Use batch pool for build and tests', False), 297 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'), 298 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False), 299 ('EXTRAS', 'Add extra directories to the compilation', '') 300 ) 301 302# Update main environment with values from ARGUMENTS & global_vars_file 303global_vars.Update(main) 304help_texts["global_vars"] += global_vars.GenerateHelpText(main) 305 306# Save sticky variable settings back to current variables file 307global_vars.Save(global_vars_file, main) 308 309# Parse EXTRAS variable to build list of all directories where we're 310# look for sources etc. This list is exported as extras_dir_list. 311base_dir = main.srcdir.abspath 312if main['EXTRAS']: 313 extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':')) 314else: 315 extras_dir_list = [] 316 317Export('base_dir') 318Export('extras_dir_list') 319 320# the ext directory should be on the #includes path 321main.Append(CPPPATH=[Dir('ext')]) 322 323# Add shared top-level headers 324main.Prepend(CPPPATH=Dir('include')) 325 326if GetOption('verbose'): 327 def MakeAction(action, string, *args, **kwargs): 328 return Action(action, *args, **kwargs) 329else: 330 MakeAction = Action 331 main['CCCOMSTR'] = Transform("CC") 332 main['CXXCOMSTR'] = Transform("CXX") 333 main['ASCOMSTR'] = Transform("AS") 334 main['ARCOMSTR'] = Transform("AR", 0) 335 main['LINKCOMSTR'] = Transform("LINK", 0) 336 main['SHLINKCOMSTR'] = Transform("SHLINK", 0) 337 main['RANLIBCOMSTR'] = Transform("RANLIB", 0) 338 main['M4COMSTR'] = Transform("M4") 339 main['SHCCCOMSTR'] = Transform("SHCC") 340 main['SHCXXCOMSTR'] = Transform("SHCXX") 341Export('MakeAction') 342 343# Initialize the Link-Time Optimization (LTO) flags 344main['LTO_CCFLAGS'] = [] 345main['LTO_LDFLAGS'] = [] 346 347# According to the readme, tcmalloc works best if the compiler doesn't 348# assume that we're using the builtin malloc and friends. These flags 349# are compiler-specific, so we need to set them after we detect which 350# compiler we're using. 351main['TCMALLOC_CCFLAGS'] = [] 352 353CXX_version = readCommand([main['CXX'],'--version'], exception=False) 354CXX_V = readCommand([main['CXX'],'-V'], exception=False) 355 356main['GCC'] = CXX_version and CXX_version.find('g++') >= 0 357main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0 358if main['GCC'] + main['CLANG'] > 1: 359 print('Error: How can we have two at the same time?') 360 Exit(1) 361 362# Set up default C++ compiler flags 363if main['GCC'] or main['CLANG']: 364 # As gcc and clang share many flags, do the common parts here 365 main.Append(CCFLAGS=['-pipe']) 366 main.Append(CCFLAGS=['-fno-strict-aliasing']) 367 # Enable -Wall and -Wextra and then disable the few warnings that 368 # we consistently violate 369 main.Append(CCFLAGS=['-Wall', '-Wundef', '-Wextra', 370 '-Wno-sign-compare', '-Wno-unused-parameter']) 371 # We always compile using C++11 372 main.Append(CXXFLAGS=['-std=c++11']) 373 if sys.platform.startswith('freebsd'): 374 main.Append(CCFLAGS=['-I/usr/local/include']) 375 main.Append(CXXFLAGS=['-I/usr/local/include']) 376 377 main['FILTER_PSHLINKFLAGS'] = lambda x: str(x).replace(' -shared', '') 378 main['PSHLINKFLAGS'] = main.subst('${FILTER_PSHLINKFLAGS(SHLINKFLAGS)}') 379 if GetOption('gold_linker'): 380 main.Append(LINKFLAGS='-fuse-ld=gold') 381 main['PLINKFLAGS'] = main.subst('${LINKFLAGS}') 382 shared_partial_flags = ['-r', '-nostdlib'] 383 main.Append(PSHLINKFLAGS=shared_partial_flags) 384 main.Append(PLINKFLAGS=shared_partial_flags) 385 386 # Treat warnings as errors but white list some warnings that we 387 # want to allow (e.g., deprecation warnings). 388 main.Append(CCFLAGS=['-Werror', 389 '-Wno-error=deprecated-declarations', 390 '-Wno-error=deprecated', 391 ]) 392else: 393 print(termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, end=' ') 394 print("Don't know what compiler options to use for your compiler.") 395 print(termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX']) 396 print(termcap.Yellow + ' version:' + termcap.Normal, end = ' ') 397 if not CXX_version: 398 print(termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" + 399 termcap.Normal) 400 else: 401 print(CXX_version.replace('\n', '<nl>')) 402 print(" If you're trying to use a compiler other than GCC") 403 print(" or clang, there appears to be something wrong with your") 404 print(" environment.") 405 print(" ") 406 print(" If you are trying to use a compiler other than those listed") 407 print(" above you will need to ease fix SConstruct and ") 408 print(" src/SConscript to support that compiler.") 409 Exit(1) 410 411if main['GCC']: 412 # Check for a supported version of gcc. >= 4.8 is chosen for its 413 # level of c++11 support. See 414 # http://gcc.gnu.org/projects/cxx0x.html for details. 415 gcc_version = readCommand([main['CXX'], '-dumpversion'], exception=False) 416 if compareVersions(gcc_version, "4.8") < 0: 417 print('Error: gcc version 4.8 or newer required.') 418 print(' Installed version: ', gcc_version) 419 Exit(1) 420 421 main['GCC_VERSION'] = gcc_version 422 423 if compareVersions(gcc_version, '4.9') >= 0: 424 # Incremental linking with LTO is currently broken in gcc versions 425 # 4.9 and above. A version where everything works completely hasn't 426 # yet been identified. 427 # 428 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67548 429 main['BROKEN_INCREMENTAL_LTO'] = True 430 if compareVersions(gcc_version, '6.0') >= 0: 431 # gcc versions 6.0 and greater accept an -flinker-output flag which 432 # selects what type of output the linker should generate. This is 433 # necessary for incremental lto to work, but is also broken in 434 # current versions of gcc. It may not be necessary in future 435 # versions. We add it here since it might be, and as a reminder that 436 # it exists. It's excluded if lto is being forced. 437 # 438 # https://gcc.gnu.org/gcc-6/changes.html 439 # https://gcc.gnu.org/ml/gcc-patches/2015-11/msg03161.html 440 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69866 441 if not GetOption('force_lto'): 442 main.Append(PSHLINKFLAGS='-flinker-output=rel') 443 main.Append(PLINKFLAGS='-flinker-output=rel') 444 445 # Make sure we warn if the user has requested to compile with the 446 # Undefined Benahvior Sanitizer and this version of gcc does not 447 # support it. 448 if GetOption('with_ubsan') and \ 449 compareVersions(gcc_version, '4.9') < 0: 450 print(termcap.Yellow + termcap.Bold + 451 'Warning: UBSan is only supported using gcc 4.9 and later.' + 452 termcap.Normal) 453 454 disable_lto = GetOption('no_lto') 455 if not disable_lto and main.get('BROKEN_INCREMENTAL_LTO', False) and \ 456 not GetOption('force_lto'): 457 print(termcap.Yellow + termcap.Bold + 458 'Warning: Your compiler doesn\'t support incremental linking' + 459 ' and lto at the same time, so lto is being disabled. To force' + 460 ' lto on anyway, use the --force-lto option. That will disable' + 461 ' partial linking.' + 462 termcap.Normal) 463 disable_lto = True 464 465 # Add the appropriate Link-Time Optimization (LTO) flags 466 # unless LTO is explicitly turned off. Note that these flags 467 # are only used by the fast target. 468 if not disable_lto: 469 # Pass the LTO flag when compiling to produce GIMPLE 470 # output, we merely create the flags here and only append 471 # them later 472 main['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 473 474 # Use the same amount of jobs for LTO as we are running 475 # scons with 476 main['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 477 478 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin-malloc', '-fno-builtin-calloc', 479 '-fno-builtin-realloc', '-fno-builtin-free']) 480 481 # The address sanitizer is available for gcc >= 4.8 482 if GetOption('with_asan'): 483 if GetOption('with_ubsan') and \ 484 compareVersions(main['GCC_VERSION'], '4.9') >= 0: 485 main.Append(CCFLAGS=['-fsanitize=address,undefined', 486 '-fno-omit-frame-pointer'], 487 LINKFLAGS='-fsanitize=address,undefined') 488 else: 489 main.Append(CCFLAGS=['-fsanitize=address', 490 '-fno-omit-frame-pointer'], 491 LINKFLAGS='-fsanitize=address') 492 # Only gcc >= 4.9 supports UBSan, so check both the version 493 # and the command-line option before adding the compiler and 494 # linker flags. 495 elif GetOption('with_ubsan') and \ 496 compareVersions(main['GCC_VERSION'], '4.9') >= 0: 497 main.Append(CCFLAGS='-fsanitize=undefined') 498 main.Append(LINKFLAGS='-fsanitize=undefined') 499 500elif main['CLANG']: 501 # Check for a supported version of clang, >= 3.1 is needed to 502 # support similar features as gcc 4.8. See 503 # http://clang.llvm.org/cxx_status.html for details 504 clang_version_re = re.compile(".* version (\d+\.\d+)") 505 clang_version_match = clang_version_re.search(CXX_version) 506 if (clang_version_match): 507 clang_version = clang_version_match.groups()[0] 508 if compareVersions(clang_version, "3.1") < 0: 509 print('Error: clang version 3.1 or newer required.') 510 print(' Installed version:', clang_version) 511 Exit(1) 512 else: 513 print('Error: Unable to determine clang version.') 514 Exit(1) 515 516 # clang has a few additional warnings that we disable, extraneous 517 # parantheses are allowed due to Ruby's printing of the AST, 518 # finally self assignments are allowed as the generated CPU code 519 # is relying on this 520 main.Append(CCFLAGS=['-Wno-parentheses', 521 '-Wno-self-assign', 522 # Some versions of libstdc++ (4.8?) seem to 523 # use struct hash and class hash 524 # interchangeably. 525 '-Wno-mismatched-tags', 526 ]) 527 528 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin']) 529 530 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as 531 # opposed to libstdc++, as the later is dated. 532 if sys.platform == "darwin": 533 main.Append(CXXFLAGS=['-stdlib=libc++']) 534 main.Append(LIBS=['c++']) 535 536 # On FreeBSD we need libthr. 537 if sys.platform.startswith('freebsd'): 538 main.Append(LIBS=['thr']) 539 540 # We require clang >= 3.1, so there is no need to check any 541 # versions here. 542 if GetOption('with_ubsan'): 543 if GetOption('with_asan'): 544 main.Append(CCFLAGS=['-fsanitize=address,undefined', 545 '-fno-omit-frame-pointer'], 546 LINKFLAGS='-fsanitize=address,undefined') 547 else: 548 main.Append(CCFLAGS='-fsanitize=undefined', 549 LINKFLAGS='-fsanitize=undefined') 550 551 elif GetOption('with_asan'): 552 main.Append(CCFLAGS=['-fsanitize=address', 553 '-fno-omit-frame-pointer'], 554 LINKFLAGS='-fsanitize=address') 555 556else: 557 print(termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, end=' ') 558 print("Don't know what compiler options to use for your compiler.") 559 print(termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX']) 560 print(termcap.Yellow + ' version:' + termcap.Normal, end=' ') 561 if not CXX_version: 562 print(termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" + 563 termcap.Normal) 564 else: 565 print(CXX_version.replace('\n', '<nl>')) 566 print(" If you're trying to use a compiler other than GCC") 567 print(" or clang, there appears to be something wrong with your") 568 print(" environment.") 569 print(" ") 570 print(" If you are trying to use a compiler other than those listed") 571 print(" above you will need to ease fix SConstruct and ") 572 print(" src/SConscript to support that compiler.") 573 Exit(1) 574 575# Set up common yacc/bison flags (needed for Ruby) 576main['YACCFLAGS'] = '-d' 577main['YACCHXXFILESUFFIX'] = '.hh' 578 579# Do this after we save setting back, or else we'll tack on an 580# extra 'qdo' every time we run scons. 581if main['BATCH']: 582 main['CC'] = main['BATCH_CMD'] + ' ' + main['CC'] 583 main['CXX'] = main['BATCH_CMD'] + ' ' + main['CXX'] 584 main['AS'] = main['BATCH_CMD'] + ' ' + main['AS'] 585 main['AR'] = main['BATCH_CMD'] + ' ' + main['AR'] 586 main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB'] 587 588if sys.platform == 'cygwin': 589 # cygwin has some header file issues... 590 main.Append(CCFLAGS=["-Wno-uninitialized"]) 591 592# Check for the protobuf compiler 593protoc_version = readCommand([main['PROTOC'], '--version'], 594 exception='').split() 595 596# First two words should be "libprotoc x.y.z" 597if len(protoc_version) < 2 or protoc_version[0] != 'libprotoc': 598 print(termcap.Yellow + termcap.Bold + 599 'Warning: Protocol buffer compiler (protoc) not found.\n' + 600 ' Please install protobuf-compiler for tracing support.' + 601 termcap.Normal) 602 main['PROTOC'] = False 603else: 604 # Based on the availability of the compress stream wrappers, 605 # require 2.1.0 606 min_protoc_version = '2.1.0' 607 if compareVersions(protoc_version[1], min_protoc_version) < 0: 608 print(termcap.Yellow + termcap.Bold + 609 'Warning: protoc version', min_protoc_version, 610 'or newer required.\n' + 611 ' Installed version:', protoc_version[1], 612 termcap.Normal) 613 main['PROTOC'] = False 614 else: 615 # Attempt to determine the appropriate include path and 616 # library path using pkg-config, that means we also need to 617 # check for pkg-config. Note that it is possible to use 618 # protobuf without the involvement of pkg-config. Later on we 619 # check go a library config check and at that point the test 620 # will fail if libprotobuf cannot be found. 621 if readCommand(['pkg-config', '--version'], exception=''): 622 try: 623 # Attempt to establish what linking flags to add for protobuf 624 # using pkg-config 625 main.ParseConfig('pkg-config --cflags --libs-only-L protobuf') 626 except: 627 print(termcap.Yellow + termcap.Bold + 628 'Warning: pkg-config could not get protobuf flags.' + 629 termcap.Normal) 630 631 632# Check for 'timeout' from GNU coreutils. If present, regressions will 633# be run with a time limit. We require version 8.13 since we rely on 634# support for the '--foreground' option. 635if sys.platform.startswith('freebsd'): 636 timeout_lines = readCommand(['gtimeout', '--version'], 637 exception='').splitlines() 638else: 639 timeout_lines = readCommand(['timeout', '--version'], 640 exception='').splitlines() 641# Get the first line and tokenize it 642timeout_version = timeout_lines[0].split() if timeout_lines else [] 643main['TIMEOUT'] = timeout_version and \ 644 compareVersions(timeout_version[-1], '8.13') >= 0 645 646# Add a custom Check function to test for structure members. 647def CheckMember(context, include, decl, member, include_quotes="<>"): 648 context.Message("Checking for member %s in %s..." % 649 (member, decl)) 650 text = """ 651#include %(header)s 652int main(){ 653 %(decl)s test; 654 (void)test.%(member)s; 655 return 0; 656}; 657""" % { "header" : include_quotes[0] + include + include_quotes[1], 658 "decl" : decl, 659 "member" : member, 660 } 661 662 ret = context.TryCompile(text, extension=".cc") 663 context.Result(ret) 664 return ret 665 666# Platform-specific configuration. Note again that we assume that all 667# builds under a given build root run on the same host platform. 668conf = Configure(main, 669 conf_dir = joinpath(build_root, '.scons_config'), 670 log_file = joinpath(build_root, 'scons_config.log'), 671 custom_tests = { 672 'CheckMember' : CheckMember, 673 }) 674 675# Check if we should compile a 64 bit binary on Mac OS X/Darwin 676try: 677 import platform 678 uname = platform.uname() 679 if uname[0] == 'Darwin' and compareVersions(uname[2], '9.0.0') >= 0: 680 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]): 681 main.Append(CCFLAGS=['-arch', 'x86_64']) 682 main.Append(CFLAGS=['-arch', 'x86_64']) 683 main.Append(LINKFLAGS=['-arch', 'x86_64']) 684 main.Append(ASFLAGS=['-arch', 'x86_64']) 685except: 686 pass 687 688# Recent versions of scons substitute a "Null" object for Configure() 689# when configuration isn't necessary, e.g., if the "--help" option is 690# present. Unfortuantely this Null object always returns false, 691# breaking all our configuration checks. We replace it with our own 692# more optimistic null object that returns True instead. 693if not conf: 694 def NullCheck(*args, **kwargs): 695 return True 696 697 class NullConf: 698 def __init__(self, env): 699 self.env = env 700 def Finish(self): 701 return self.env 702 def __getattr__(self, mname): 703 return NullCheck 704 705 conf = NullConf(main) 706 707# Cache build files in the supplied directory. 708if main['M5_BUILD_CACHE']: 709 print('Using build cache located at', main['M5_BUILD_CACHE']) 710 CacheDir(main['M5_BUILD_CACHE']) 711 712main['USE_PYTHON'] = not GetOption('without_python') 713if main['USE_PYTHON']: 714 # Find Python include and library directories for embedding the 715 # interpreter. We rely on python-config to resolve the appropriate 716 # includes and linker flags. ParseConfig does not seem to understand 717 # the more exotic linker flags such as -Xlinker and -export-dynamic so 718 # we add them explicitly below. If you want to link in an alternate 719 # version of python, see above for instructions on how to invoke 720 # scons with the appropriate PATH set. 721 722 python_config = find_first_prog(main['PYTHON_CONFIG']) 723 if python_config is None: 724 print("Error: can't find a suitable python-config, tried %s" % \ 725 main['PYTHON_CONFIG']) 726 Exit(1) 727 728 print("Info: Using Python config: %s" % (python_config, )) 729 py_includes = readCommand([python_config, '--includes'], 730 exception='').split() 731 py_includes = filter(lambda s: match(r'.*\/include\/.*',s), py_includes) 732 # Strip the -I from the include folders before adding them to the 733 # CPPPATH 734 py_includes = map(lambda s: s[2:] if s.startswith('-I') else s, py_includes) 735 main.Append(CPPPATH=py_includes) 736 737 # Read the linker flags and split them into libraries and other link 738 # flags. The libraries are added later through the call the CheckLib. 739 py_ld_flags = readCommand([python_config, '--ldflags'], 740 exception='').split() 741 py_libs = [] 742 for lib in py_ld_flags: 743 if not lib.startswith('-l'): 744 main.Append(LINKFLAGS=[lib]) 745 else: 746 lib = lib[2:] 747 if lib not in py_libs: 748 py_libs.append(lib) 749 750 # verify that this stuff works 751 if not conf.CheckHeader('Python.h', '<>'): 752 print("Error: Check failed for Python.h header in", py_includes) 753 print("Two possible reasons:") 754 print("1. Python headers are not installed (You can install the " 755 "package python-dev on Ubuntu and RedHat)") 756 print("2. SCons is using a wrong C compiler. This can happen if " 757 "CC has the wrong value.") 758 print("CC = %s" % main['CC']) 759 Exit(1) 760 761 for lib in py_libs: 762 if not conf.CheckLib(lib): 763 print("Error: can't find library %s required by python" % lib) 764 Exit(1) 765 766# On Solaris you need to use libsocket for socket ops 767if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'): 768 if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'): 769 print("Can't find library with socket calls (e.g. accept())") 770 Exit(1) 771 772# Check for zlib. If the check passes, libz will be automatically 773# added to the LIBS environment variable. 774if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'): 775 print('Error: did not find needed zlib compression library ' 776 'and/or zlib.h header file.') 777 print(' Please install zlib and try again.') 778 Exit(1) 779 780# If we have the protobuf compiler, also make sure we have the 781# development libraries. If the check passes, libprotobuf will be 782# automatically added to the LIBS environment variable. After 783# this, we can use the HAVE_PROTOBUF flag to determine if we have 784# got both protoc and libprotobuf available. 785main['HAVE_PROTOBUF'] = main['PROTOC'] and \ 786 conf.CheckLibWithHeader('protobuf', 'google/protobuf/message.h', 787 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;') 788 789# Valgrind gets much less confused if you tell it when you're using 790# alternative stacks. 791main['HAVE_VALGRIND'] = conf.CheckCHeader('valgrind/valgrind.h') 792 793# If we have the compiler but not the library, print another warning. 794if main['PROTOC'] and not main['HAVE_PROTOBUF']: 795 print(termcap.Yellow + termcap.Bold + 796 'Warning: did not find protocol buffer library and/or headers.\n' + 797 ' Please install libprotobuf-dev for tracing support.' + 798 termcap.Normal) 799 800# Check for librt. 801have_posix_clock = \ 802 conf.CheckLibWithHeader(None, 'time.h', 'C', 803 'clock_nanosleep(0,0,NULL,NULL);') or \ 804 conf.CheckLibWithHeader('rt', 'time.h', 'C', 805 'clock_nanosleep(0,0,NULL,NULL);') 806 807have_posix_timers = \ 808 conf.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C', 809 'timer_create(CLOCK_MONOTONIC, NULL, NULL);') 810 811if not GetOption('without_tcmalloc'): 812 if conf.CheckLib('tcmalloc'): 813 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 814 elif conf.CheckLib('tcmalloc_minimal'): 815 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 816 else: 817 print(termcap.Yellow + termcap.Bold + 818 "You can get a 12% performance improvement by " 819 "installing tcmalloc (libgoogle-perftools-dev package " 820 "on Ubuntu or RedHat)." + termcap.Normal) 821 822 823# Detect back trace implementations. The last implementation in the 824# list will be used by default. 825backtrace_impls = [ "none" ] 826 827backtrace_checker = 'char temp;' + \ 828 ' backtrace_symbols_fd((void*)&temp, 0, 0);' 829if conf.CheckLibWithHeader(None, 'execinfo.h', 'C', backtrace_checker): 830 backtrace_impls.append("glibc") 831elif conf.CheckLibWithHeader('execinfo', 'execinfo.h', 'C', 832 backtrace_checker): 833 # NetBSD and FreeBSD need libexecinfo. 834 backtrace_impls.append("glibc") 835 main.Append(LIBS=['execinfo']) 836 837if backtrace_impls[-1] == "none": 838 default_backtrace_impl = "none" 839 print(termcap.Yellow + termcap.Bold + 840 "No suitable back trace implementation found." + 841 termcap.Normal) 842 843if not have_posix_clock: 844 print("Can't find library for POSIX clocks.") 845 846# Check for <fenv.h> (C99 FP environment control) 847have_fenv = conf.CheckHeader('fenv.h', '<>') 848if not have_fenv: 849 print("Warning: Header file <fenv.h> not found.") 850 print(" This host has no IEEE FP rounding mode control.") 851 852# Check for <png.h> (libpng library needed if wanting to dump 853# frame buffer image in png format) 854have_png = conf.CheckHeader('png.h', '<>') 855if not have_png: 856 print("Warning: Header file <png.h> not found.") 857 print(" This host has no libpng library.") 858 print(" Disabling support for PNG framebuffers.") 859 860# Check if we should enable KVM-based hardware virtualization. The API 861# we rely on exists since version 2.6.36 of the kernel, but somehow 862# the KVM_API_VERSION does not reflect the change. We test for one of 863# the types as a fall back. 864have_kvm = conf.CheckHeader('linux/kvm.h', '<>') 865if not have_kvm: 866 print("Info: Compatible header file <linux/kvm.h> not found, " 867 "disabling KVM support.") 868 869# Check if the TUN/TAP driver is available. 870have_tuntap = conf.CheckHeader('linux/if_tun.h', '<>') 871if not have_tuntap: 872 print("Info: Compatible header file <linux/if_tun.h> not found.") 873 874# x86 needs support for xsave. We test for the structure here since we 875# won't be able to run new tests by the time we know which ISA we're 876# targeting. 877have_kvm_xsave = conf.CheckTypeSize('struct kvm_xsave', 878 '#include <linux/kvm.h>') != 0 879 880# Check if the requested target ISA is compatible with the host 881def is_isa_kvm_compatible(isa): 882 try: 883 import platform 884 host_isa = platform.machine() 885 except: 886 print("Warning: Failed to determine host ISA.") 887 return False 888 889 if not have_posix_timers: 890 print("Warning: Can not enable KVM, host seems to lack support " 891 "for POSIX timers") 892 return False 893 894 if isa == "arm": 895 return host_isa in ( "armv7l", "aarch64" ) 896 elif isa == "x86": 897 if host_isa != "x86_64": 898 return False 899 900 if not have_kvm_xsave: 901 print("KVM on x86 requires xsave support in kernel headers.") 902 return False 903 904 return True 905 else: 906 return False 907 908 909# Check if the exclude_host attribute is available. We want this to 910# get accurate instruction counts in KVM. 911main['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf.CheckMember( 912 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host') 913 914 915###################################################################### 916# 917# Finish the configuration 918# 919main = conf.Finish() 920 921###################################################################### 922# 923# Collect all non-global variables 924# 925 926# Define the universe of supported ISAs 927all_isa_list = [ ] 928all_gpu_isa_list = [ ] 929Export('all_isa_list') 930Export('all_gpu_isa_list') 931 932class CpuModel(object): 933 '''The CpuModel class encapsulates everything the ISA parser needs to 934 know about a particular CPU model.''' 935 936 # Dict of available CPU model objects. Accessible as CpuModel.dict. 937 dict = {} 938 939 # Constructor. Automatically adds models to CpuModel.dict. 940 def __init__(self, name, default=False): 941 self.name = name # name of model 942 943 # This cpu is enabled by default 944 self.default = default 945 946 # Add self to dict 947 if name in CpuModel.dict: 948 raise AttributeError, "CpuModel '%s' already registered" % name 949 CpuModel.dict[name] = self 950 951Export('CpuModel') 952 953# Sticky variables get saved in the variables file so they persist from 954# one invocation to the next (unless overridden, in which case the new 955# value becomes sticky). 956sticky_vars = Variables(args=ARGUMENTS) 957Export('sticky_vars') 958 959# Sticky variables that should be exported 960export_vars = [] 961Export('export_vars') 962 963# For Ruby 964all_protocols = [] 965Export('all_protocols') 966protocol_dirs = [] 967Export('protocol_dirs') 968slicc_includes = [] 969Export('slicc_includes') 970 971# Walk the tree and execute all SConsopts scripts that wil add to the 972# above variables 973if GetOption('verbose'): 974 print("Reading SConsopts") 975for bdir in [ base_dir ] + extras_dir_list: 976 if not isdir(bdir): 977 print("Error: directory '%s' does not exist" % bdir) 978 Exit(1) 979 for root, dirs, files in os.walk(bdir): 980 if 'SConsopts' in files: 981 if GetOption('verbose'): 982 print("Reading", joinpath(root, 'SConsopts')) 983 SConscript(joinpath(root, 'SConsopts')) 984 985all_isa_list.sort() 986all_gpu_isa_list.sort() 987 988sticky_vars.AddVariables( 989 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list), 990 EnumVariable('TARGET_GPU_ISA', 'Target GPU ISA', 'hsail', all_gpu_isa_list), 991 ListVariable('CPU_MODELS', 'CPU models', 992 sorted(n for n,m in CpuModel.dict.iteritems() if m.default), 993 sorted(CpuModel.dict.keys())), 994 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger', 995 False), 996 BoolVariable('SS_COMPATIBLE_FP', 997 'Make floating-point results compatible with SimpleScalar', 998 False), 999 BoolVariable('USE_SSE2', 1000 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts', 1001 False), 1002 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock), 1003 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv), 1004 BoolVariable('USE_PNG', 'Enable support for PNG images', have_png), 1005 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', 1006 False), 1007 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models', 1008 have_kvm), 1009 BoolVariable('USE_TUNTAP', 1010 'Enable using a tap device to bridge to the host network', 1011 have_tuntap), 1012 BoolVariable('BUILD_GPU', 'Build the compute-GPU model', False), 1013 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None', 1014 all_protocols), 1015 EnumVariable('BACKTRACE_IMPL', 'Post-mortem dump implementation', 1016 backtrace_impls[-1], backtrace_impls), 1017 ('NUMBER_BITS_PER_SET', 'Max elements in set (default 64)', 1018 64), 1019 ) 1020 1021# These variables get exported to #defines in config/*.hh (see src/SConscript). 1022export_vars += ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'TARGET_GPU_ISA', 1023 'CP_ANNOTATE', 'USE_POSIX_CLOCK', 'USE_KVM', 'USE_TUNTAP', 1024 'PROTOCOL', 'HAVE_PROTOBUF', 'HAVE_VALGRIND', 1025 'HAVE_PERF_ATTR_EXCLUDE_HOST', 'USE_PNG', 1026 'NUMBER_BITS_PER_SET'] 1027 1028################################################### 1029# 1030# Define a SCons builder for configuration flag headers. 1031# 1032################################################### 1033 1034# This function generates a config header file that #defines the 1035# variable symbol to the current variable setting (0 or 1). The source 1036# operands are the name of the variable and a Value node containing the 1037# value of the variable. 1038def build_config_file(target, source, env): 1039 (variable, value) = [s.get_contents() for s in source] 1040 f = file(str(target[0]), 'w') 1041 print('#define', variable, value, file=f) 1042 f.close() 1043 return None 1044 1045# Combine the two functions into a scons Action object. 1046config_action = MakeAction(build_config_file, Transform("CONFIG H", 2)) 1047 1048# The emitter munges the source & target node lists to reflect what 1049# we're really doing. 1050def config_emitter(target, source, env): 1051 # extract variable name from Builder arg 1052 variable = str(target[0]) 1053 # True target is config header file 1054 target = joinpath('config', variable.lower() + '.hh') 1055 val = env[variable] 1056 if isinstance(val, bool): 1057 # Force value to 0/1 1058 val = int(val) 1059 elif isinstance(val, str): 1060 val = '"' + val + '"' 1061 1062 # Sources are variable name & value (packaged in SCons Value nodes) 1063 return ([target], [Value(variable), Value(val)]) 1064 1065config_builder = Builder(emitter = config_emitter, action = config_action) 1066 1067main.Append(BUILDERS = { 'ConfigFile' : config_builder }) 1068 1069################################################### 1070# 1071# Builders for static and shared partially linked object files. 1072# 1073################################################### 1074 1075partial_static_builder = Builder(action=SCons.Defaults.LinkAction, 1076 src_suffix='$OBJSUFFIX', 1077 src_builder=['StaticObject', 'Object'], 1078 LINKFLAGS='$PLINKFLAGS', 1079 LIBS='') 1080 1081def partial_shared_emitter(target, source, env): 1082 for tgt in target: 1083 tgt.attributes.shared = 1 1084 return (target, source) 1085partial_shared_builder = Builder(action=SCons.Defaults.ShLinkAction, 1086 emitter=partial_shared_emitter, 1087 src_suffix='$SHOBJSUFFIX', 1088 src_builder='SharedObject', 1089 SHLINKFLAGS='$PSHLINKFLAGS', 1090 LIBS='') 1091 1092main.Append(BUILDERS = { 'PartialShared' : partial_shared_builder, 1093 'PartialStatic' : partial_static_builder }) 1094 1095def add_local_rpath(env, *targets): 1096 '''Set up an RPATH for a library which lives in the build directory. 1097 1098 The construction environment variable BIN_RPATH_PREFIX should be set to 1099 the relative path of the build directory starting from the location of the 1100 binary.''' 1101 for target in targets: 1102 target = env.Entry(target) 1103 if not isinstance(target, SCons.Node.FS.Dir): 1104 target = target.dir 1105 relpath = os.path.relpath(target.abspath, env['BUILDDIR']) 1106 components = [ 1107 '\\$$ORIGIN', 1108 '${BIN_RPATH_PREFIX}', 1109 relpath 1110 ] 1111 env.Append(RPATH=[env.Literal(os.path.join(*components))]) 1112 1113if sys.platform != "darwin": 1114 main.Append(LINKFLAGS=Split('-z origin')) 1115 1116main.AddMethod(add_local_rpath, 'AddLocalRPATH') 1117 1118# builds in ext are shared across all configs in the build root. 1119ext_dir = abspath(joinpath(str(main.root), 'ext')) 1120ext_build_dirs = [] 1121for root, dirs, files in os.walk(ext_dir): 1122 if 'SConscript' in files: 1123 build_dir = os.path.relpath(root, ext_dir) 1124 ext_build_dirs.append(build_dir) 1125 main.SConscript(joinpath(root, 'SConscript'), 1126 variant_dir=joinpath(build_root, build_dir)) 1127 1128gdb_xml_dir = joinpath(ext_dir, 'gdb-xml') 1129Export('gdb_xml_dir') 1130 1131main.Prepend(CPPPATH=Dir('ext/pybind11/include/')) 1132 1133################################################### 1134# 1135# This builder and wrapper method are used to set up a directory with 1136# switching headers. Those are headers which are in a generic location and 1137# that include more specific headers from a directory chosen at build time 1138# based on the current build settings. 1139# 1140################################################### 1141 1142def build_switching_header(target, source, env): 1143 path = str(target[0]) 1144 subdir = str(source[0]) 1145 dp, fp = os.path.split(path) 1146 dp = os.path.relpath(os.path.realpath(dp), 1147 os.path.realpath(env['BUILDDIR'])) 1148 with open(path, 'w') as hdr: 1149 print('#include "%s/%s/%s"' % (dp, subdir, fp), file=hdr) 1150 1151switching_header_action = MakeAction(build_switching_header, 1152 Transform('GENERATE')) 1153 1154switching_header_builder = Builder(action=switching_header_action, 1155 source_factory=Value, 1156 single_source=True) 1157 1158main.Append(BUILDERS = { 'SwitchingHeader': switching_header_builder }) 1159 1160def switching_headers(self, headers, source): 1161 for header in headers: 1162 self.SwitchingHeader(header, source) 1163 1164main.AddMethod(switching_headers, 'SwitchingHeaders') 1165 1166################################################### 1167# 1168# Define build environments for selected configurations. 1169# 1170################################################### 1171 1172for variant_path in variant_paths: 1173 if not GetOption('silent'): 1174 print("Building in", variant_path) 1175 1176 # Make a copy of the build-root environment to use for this config. 1177 env = main.Clone() 1178 env['BUILDDIR'] = variant_path 1179 1180 # variant_dir is the tail component of build path, and is used to 1181 # determine the build parameters (e.g., 'ALPHA_SE') 1182 (build_root, variant_dir) = splitpath(variant_path) 1183 1184 # Set env variables according to the build directory config. 1185 sticky_vars.files = [] 1186 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in 1187 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke 1188 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings. 1189 current_vars_file = joinpath(build_root, 'variables', variant_dir) 1190 if isfile(current_vars_file): 1191 sticky_vars.files.append(current_vars_file) 1192 if not GetOption('silent'): 1193 print("Using saved variables file %s" % current_vars_file) 1194 elif variant_dir in ext_build_dirs: 1195 # Things in ext are built without a variant directory. 1196 continue 1197 else: 1198 # Build dir-specific variables file doesn't exist. 1199 1200 # Make sure the directory is there so we can create it later 1201 opt_dir = dirname(current_vars_file) 1202 if not isdir(opt_dir): 1203 mkdir(opt_dir) 1204 1205 # Get default build variables from source tree. Variables are 1206 # normally determined by name of $VARIANT_DIR, but can be 1207 # overridden by '--default=' arg on command line. 1208 default = GetOption('default') 1209 opts_dir = joinpath(main.root.abspath, 'build_opts') 1210 if default: 1211 default_vars_files = [joinpath(build_root, 'variables', default), 1212 joinpath(opts_dir, default)] 1213 else: 1214 default_vars_files = [joinpath(opts_dir, variant_dir)] 1215 existing_files = filter(isfile, default_vars_files) 1216 if existing_files: 1217 default_vars_file = existing_files[0] 1218 sticky_vars.files.append(default_vars_file) 1219 print("Variables file %s not found,\n using defaults in %s" 1220 % (current_vars_file, default_vars_file)) 1221 else: 1222 print("Error: cannot find variables file %s or " 1223 "default file(s) %s" 1224 % (current_vars_file, ' or '.join(default_vars_files))) 1225 Exit(1) 1226 1227 # Apply current variable settings to env 1228 sticky_vars.Update(env) 1229 1230 help_texts["local_vars"] += \ 1231 "Build variables for %s:\n" % variant_dir \ 1232 + sticky_vars.GenerateHelpText(env) 1233 1234 # Process variable settings. 1235 1236 if not have_fenv and env['USE_FENV']: 1237 print("Warning: <fenv.h> not available; " 1238 "forcing USE_FENV to False in", variant_dir + ".") 1239 env['USE_FENV'] = False 1240 1241 if not env['USE_FENV']: 1242 print("Warning: No IEEE FP rounding mode control in", 1243 variant_dir + ".") 1244 print(" FP results may deviate slightly from other platforms.") 1245 1246 if not have_png and env['USE_PNG']: 1247 print("Warning: <png.h> not available; " 1248 "forcing USE_PNG to False in", variant_dir + ".") 1249 env['USE_PNG'] = False 1250 1251 if env['USE_PNG']: 1252 env.Append(LIBS=['png']) 1253 1254 if env['EFENCE']: 1255 env.Append(LIBS=['efence']) 1256 1257 if env['USE_KVM']: 1258 if not have_kvm: 1259 print("Warning: Can not enable KVM, host seems to " 1260 "lack KVM support") 1261 env['USE_KVM'] = False 1262 elif not is_isa_kvm_compatible(env['TARGET_ISA']): 1263 print("Info: KVM support disabled due to unsupported host and " 1264 "target ISA combination") 1265 env['USE_KVM'] = False 1266 1267 if env['USE_TUNTAP']: 1268 if not have_tuntap: 1269 print("Warning: Can't connect EtherTap with a tap device.") 1270 env['USE_TUNTAP'] = False 1271 1272 if env['BUILD_GPU']: 1273 env.Append(CPPDEFINES=['BUILD_GPU']) 1274 1275 # Warn about missing optional functionality 1276 if env['USE_KVM']: 1277 if not main['HAVE_PERF_ATTR_EXCLUDE_HOST']: 1278 print("Warning: perf_event headers lack support for the " 1279 "exclude_host attribute. KVM instruction counts will " 1280 "be inaccurate.") 1281 1282 # Save sticky variable settings back to current variables file 1283 sticky_vars.Save(current_vars_file, env) 1284 1285 if env['USE_SSE2']: 1286 env.Append(CCFLAGS=['-msse2']) 1287
| 295 ('PYTHON_CONFIG', 'Python config binary to use', 296 [ 'python2.7-config', 'python-config' ]), 297 ('PROTOC', 'protoc tool', environ.get('PROTOC', 'protoc')), 298 ('BATCH', 'Use batch pool for build and tests', False), 299 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'), 300 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False), 301 ('EXTRAS', 'Add extra directories to the compilation', '') 302 ) 303 304# Update main environment with values from ARGUMENTS & global_vars_file 305global_vars.Update(main) 306help_texts["global_vars"] += global_vars.GenerateHelpText(main) 307 308# Save sticky variable settings back to current variables file 309global_vars.Save(global_vars_file, main) 310 311# Parse EXTRAS variable to build list of all directories where we're 312# look for sources etc. This list is exported as extras_dir_list. 313base_dir = main.srcdir.abspath 314if main['EXTRAS']: 315 extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':')) 316else: 317 extras_dir_list = [] 318 319Export('base_dir') 320Export('extras_dir_list') 321 322# the ext directory should be on the #includes path 323main.Append(CPPPATH=[Dir('ext')]) 324 325# Add shared top-level headers 326main.Prepend(CPPPATH=Dir('include')) 327 328if GetOption('verbose'): 329 def MakeAction(action, string, *args, **kwargs): 330 return Action(action, *args, **kwargs) 331else: 332 MakeAction = Action 333 main['CCCOMSTR'] = Transform("CC") 334 main['CXXCOMSTR'] = Transform("CXX") 335 main['ASCOMSTR'] = Transform("AS") 336 main['ARCOMSTR'] = Transform("AR", 0) 337 main['LINKCOMSTR'] = Transform("LINK", 0) 338 main['SHLINKCOMSTR'] = Transform("SHLINK", 0) 339 main['RANLIBCOMSTR'] = Transform("RANLIB", 0) 340 main['M4COMSTR'] = Transform("M4") 341 main['SHCCCOMSTR'] = Transform("SHCC") 342 main['SHCXXCOMSTR'] = Transform("SHCXX") 343Export('MakeAction') 344 345# Initialize the Link-Time Optimization (LTO) flags 346main['LTO_CCFLAGS'] = [] 347main['LTO_LDFLAGS'] = [] 348 349# According to the readme, tcmalloc works best if the compiler doesn't 350# assume that we're using the builtin malloc and friends. These flags 351# are compiler-specific, so we need to set them after we detect which 352# compiler we're using. 353main['TCMALLOC_CCFLAGS'] = [] 354 355CXX_version = readCommand([main['CXX'],'--version'], exception=False) 356CXX_V = readCommand([main['CXX'],'-V'], exception=False) 357 358main['GCC'] = CXX_version and CXX_version.find('g++') >= 0 359main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0 360if main['GCC'] + main['CLANG'] > 1: 361 print('Error: How can we have two at the same time?') 362 Exit(1) 363 364# Set up default C++ compiler flags 365if main['GCC'] or main['CLANG']: 366 # As gcc and clang share many flags, do the common parts here 367 main.Append(CCFLAGS=['-pipe']) 368 main.Append(CCFLAGS=['-fno-strict-aliasing']) 369 # Enable -Wall and -Wextra and then disable the few warnings that 370 # we consistently violate 371 main.Append(CCFLAGS=['-Wall', '-Wundef', '-Wextra', 372 '-Wno-sign-compare', '-Wno-unused-parameter']) 373 # We always compile using C++11 374 main.Append(CXXFLAGS=['-std=c++11']) 375 if sys.platform.startswith('freebsd'): 376 main.Append(CCFLAGS=['-I/usr/local/include']) 377 main.Append(CXXFLAGS=['-I/usr/local/include']) 378 379 main['FILTER_PSHLINKFLAGS'] = lambda x: str(x).replace(' -shared', '') 380 main['PSHLINKFLAGS'] = main.subst('${FILTER_PSHLINKFLAGS(SHLINKFLAGS)}') 381 if GetOption('gold_linker'): 382 main.Append(LINKFLAGS='-fuse-ld=gold') 383 main['PLINKFLAGS'] = main.subst('${LINKFLAGS}') 384 shared_partial_flags = ['-r', '-nostdlib'] 385 main.Append(PSHLINKFLAGS=shared_partial_flags) 386 main.Append(PLINKFLAGS=shared_partial_flags) 387 388 # Treat warnings as errors but white list some warnings that we 389 # want to allow (e.g., deprecation warnings). 390 main.Append(CCFLAGS=['-Werror', 391 '-Wno-error=deprecated-declarations', 392 '-Wno-error=deprecated', 393 ]) 394else: 395 print(termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, end=' ') 396 print("Don't know what compiler options to use for your compiler.") 397 print(termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX']) 398 print(termcap.Yellow + ' version:' + termcap.Normal, end = ' ') 399 if not CXX_version: 400 print(termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" + 401 termcap.Normal) 402 else: 403 print(CXX_version.replace('\n', '<nl>')) 404 print(" If you're trying to use a compiler other than GCC") 405 print(" or clang, there appears to be something wrong with your") 406 print(" environment.") 407 print(" ") 408 print(" If you are trying to use a compiler other than those listed") 409 print(" above you will need to ease fix SConstruct and ") 410 print(" src/SConscript to support that compiler.") 411 Exit(1) 412 413if main['GCC']: 414 # Check for a supported version of gcc. >= 4.8 is chosen for its 415 # level of c++11 support. See 416 # http://gcc.gnu.org/projects/cxx0x.html for details. 417 gcc_version = readCommand([main['CXX'], '-dumpversion'], exception=False) 418 if compareVersions(gcc_version, "4.8") < 0: 419 print('Error: gcc version 4.8 or newer required.') 420 print(' Installed version: ', gcc_version) 421 Exit(1) 422 423 main['GCC_VERSION'] = gcc_version 424 425 if compareVersions(gcc_version, '4.9') >= 0: 426 # Incremental linking with LTO is currently broken in gcc versions 427 # 4.9 and above. A version where everything works completely hasn't 428 # yet been identified. 429 # 430 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67548 431 main['BROKEN_INCREMENTAL_LTO'] = True 432 if compareVersions(gcc_version, '6.0') >= 0: 433 # gcc versions 6.0 and greater accept an -flinker-output flag which 434 # selects what type of output the linker should generate. This is 435 # necessary for incremental lto to work, but is also broken in 436 # current versions of gcc. It may not be necessary in future 437 # versions. We add it here since it might be, and as a reminder that 438 # it exists. It's excluded if lto is being forced. 439 # 440 # https://gcc.gnu.org/gcc-6/changes.html 441 # https://gcc.gnu.org/ml/gcc-patches/2015-11/msg03161.html 442 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69866 443 if not GetOption('force_lto'): 444 main.Append(PSHLINKFLAGS='-flinker-output=rel') 445 main.Append(PLINKFLAGS='-flinker-output=rel') 446 447 # Make sure we warn if the user has requested to compile with the 448 # Undefined Benahvior Sanitizer and this version of gcc does not 449 # support it. 450 if GetOption('with_ubsan') and \ 451 compareVersions(gcc_version, '4.9') < 0: 452 print(termcap.Yellow + termcap.Bold + 453 'Warning: UBSan is only supported using gcc 4.9 and later.' + 454 termcap.Normal) 455 456 disable_lto = GetOption('no_lto') 457 if not disable_lto and main.get('BROKEN_INCREMENTAL_LTO', False) and \ 458 not GetOption('force_lto'): 459 print(termcap.Yellow + termcap.Bold + 460 'Warning: Your compiler doesn\'t support incremental linking' + 461 ' and lto at the same time, so lto is being disabled. To force' + 462 ' lto on anyway, use the --force-lto option. That will disable' + 463 ' partial linking.' + 464 termcap.Normal) 465 disable_lto = True 466 467 # Add the appropriate Link-Time Optimization (LTO) flags 468 # unless LTO is explicitly turned off. Note that these flags 469 # are only used by the fast target. 470 if not disable_lto: 471 # Pass the LTO flag when compiling to produce GIMPLE 472 # output, we merely create the flags here and only append 473 # them later 474 main['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 475 476 # Use the same amount of jobs for LTO as we are running 477 # scons with 478 main['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 479 480 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin-malloc', '-fno-builtin-calloc', 481 '-fno-builtin-realloc', '-fno-builtin-free']) 482 483 # The address sanitizer is available for gcc >= 4.8 484 if GetOption('with_asan'): 485 if GetOption('with_ubsan') and \ 486 compareVersions(main['GCC_VERSION'], '4.9') >= 0: 487 main.Append(CCFLAGS=['-fsanitize=address,undefined', 488 '-fno-omit-frame-pointer'], 489 LINKFLAGS='-fsanitize=address,undefined') 490 else: 491 main.Append(CCFLAGS=['-fsanitize=address', 492 '-fno-omit-frame-pointer'], 493 LINKFLAGS='-fsanitize=address') 494 # Only gcc >= 4.9 supports UBSan, so check both the version 495 # and the command-line option before adding the compiler and 496 # linker flags. 497 elif GetOption('with_ubsan') and \ 498 compareVersions(main['GCC_VERSION'], '4.9') >= 0: 499 main.Append(CCFLAGS='-fsanitize=undefined') 500 main.Append(LINKFLAGS='-fsanitize=undefined') 501 502elif main['CLANG']: 503 # Check for a supported version of clang, >= 3.1 is needed to 504 # support similar features as gcc 4.8. See 505 # http://clang.llvm.org/cxx_status.html for details 506 clang_version_re = re.compile(".* version (\d+\.\d+)") 507 clang_version_match = clang_version_re.search(CXX_version) 508 if (clang_version_match): 509 clang_version = clang_version_match.groups()[0] 510 if compareVersions(clang_version, "3.1") < 0: 511 print('Error: clang version 3.1 or newer required.') 512 print(' Installed version:', clang_version) 513 Exit(1) 514 else: 515 print('Error: Unable to determine clang version.') 516 Exit(1) 517 518 # clang has a few additional warnings that we disable, extraneous 519 # parantheses are allowed due to Ruby's printing of the AST, 520 # finally self assignments are allowed as the generated CPU code 521 # is relying on this 522 main.Append(CCFLAGS=['-Wno-parentheses', 523 '-Wno-self-assign', 524 # Some versions of libstdc++ (4.8?) seem to 525 # use struct hash and class hash 526 # interchangeably. 527 '-Wno-mismatched-tags', 528 ]) 529 530 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin']) 531 532 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as 533 # opposed to libstdc++, as the later is dated. 534 if sys.platform == "darwin": 535 main.Append(CXXFLAGS=['-stdlib=libc++']) 536 main.Append(LIBS=['c++']) 537 538 # On FreeBSD we need libthr. 539 if sys.platform.startswith('freebsd'): 540 main.Append(LIBS=['thr']) 541 542 # We require clang >= 3.1, so there is no need to check any 543 # versions here. 544 if GetOption('with_ubsan'): 545 if GetOption('with_asan'): 546 main.Append(CCFLAGS=['-fsanitize=address,undefined', 547 '-fno-omit-frame-pointer'], 548 LINKFLAGS='-fsanitize=address,undefined') 549 else: 550 main.Append(CCFLAGS='-fsanitize=undefined', 551 LINKFLAGS='-fsanitize=undefined') 552 553 elif GetOption('with_asan'): 554 main.Append(CCFLAGS=['-fsanitize=address', 555 '-fno-omit-frame-pointer'], 556 LINKFLAGS='-fsanitize=address') 557 558else: 559 print(termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, end=' ') 560 print("Don't know what compiler options to use for your compiler.") 561 print(termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX']) 562 print(termcap.Yellow + ' version:' + termcap.Normal, end=' ') 563 if not CXX_version: 564 print(termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" + 565 termcap.Normal) 566 else: 567 print(CXX_version.replace('\n', '<nl>')) 568 print(" If you're trying to use a compiler other than GCC") 569 print(" or clang, there appears to be something wrong with your") 570 print(" environment.") 571 print(" ") 572 print(" If you are trying to use a compiler other than those listed") 573 print(" above you will need to ease fix SConstruct and ") 574 print(" src/SConscript to support that compiler.") 575 Exit(1) 576 577# Set up common yacc/bison flags (needed for Ruby) 578main['YACCFLAGS'] = '-d' 579main['YACCHXXFILESUFFIX'] = '.hh' 580 581# Do this after we save setting back, or else we'll tack on an 582# extra 'qdo' every time we run scons. 583if main['BATCH']: 584 main['CC'] = main['BATCH_CMD'] + ' ' + main['CC'] 585 main['CXX'] = main['BATCH_CMD'] + ' ' + main['CXX'] 586 main['AS'] = main['BATCH_CMD'] + ' ' + main['AS'] 587 main['AR'] = main['BATCH_CMD'] + ' ' + main['AR'] 588 main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB'] 589 590if sys.platform == 'cygwin': 591 # cygwin has some header file issues... 592 main.Append(CCFLAGS=["-Wno-uninitialized"]) 593 594# Check for the protobuf compiler 595protoc_version = readCommand([main['PROTOC'], '--version'], 596 exception='').split() 597 598# First two words should be "libprotoc x.y.z" 599if len(protoc_version) < 2 or protoc_version[0] != 'libprotoc': 600 print(termcap.Yellow + termcap.Bold + 601 'Warning: Protocol buffer compiler (protoc) not found.\n' + 602 ' Please install protobuf-compiler for tracing support.' + 603 termcap.Normal) 604 main['PROTOC'] = False 605else: 606 # Based on the availability of the compress stream wrappers, 607 # require 2.1.0 608 min_protoc_version = '2.1.0' 609 if compareVersions(protoc_version[1], min_protoc_version) < 0: 610 print(termcap.Yellow + termcap.Bold + 611 'Warning: protoc version', min_protoc_version, 612 'or newer required.\n' + 613 ' Installed version:', protoc_version[1], 614 termcap.Normal) 615 main['PROTOC'] = False 616 else: 617 # Attempt to determine the appropriate include path and 618 # library path using pkg-config, that means we also need to 619 # check for pkg-config. Note that it is possible to use 620 # protobuf without the involvement of pkg-config. Later on we 621 # check go a library config check and at that point the test 622 # will fail if libprotobuf cannot be found. 623 if readCommand(['pkg-config', '--version'], exception=''): 624 try: 625 # Attempt to establish what linking flags to add for protobuf 626 # using pkg-config 627 main.ParseConfig('pkg-config --cflags --libs-only-L protobuf') 628 except: 629 print(termcap.Yellow + termcap.Bold + 630 'Warning: pkg-config could not get protobuf flags.' + 631 termcap.Normal) 632 633 634# Check for 'timeout' from GNU coreutils. If present, regressions will 635# be run with a time limit. We require version 8.13 since we rely on 636# support for the '--foreground' option. 637if sys.platform.startswith('freebsd'): 638 timeout_lines = readCommand(['gtimeout', '--version'], 639 exception='').splitlines() 640else: 641 timeout_lines = readCommand(['timeout', '--version'], 642 exception='').splitlines() 643# Get the first line and tokenize it 644timeout_version = timeout_lines[0].split() if timeout_lines else [] 645main['TIMEOUT'] = timeout_version and \ 646 compareVersions(timeout_version[-1], '8.13') >= 0 647 648# Add a custom Check function to test for structure members. 649def CheckMember(context, include, decl, member, include_quotes="<>"): 650 context.Message("Checking for member %s in %s..." % 651 (member, decl)) 652 text = """ 653#include %(header)s 654int main(){ 655 %(decl)s test; 656 (void)test.%(member)s; 657 return 0; 658}; 659""" % { "header" : include_quotes[0] + include + include_quotes[1], 660 "decl" : decl, 661 "member" : member, 662 } 663 664 ret = context.TryCompile(text, extension=".cc") 665 context.Result(ret) 666 return ret 667 668# Platform-specific configuration. Note again that we assume that all 669# builds under a given build root run on the same host platform. 670conf = Configure(main, 671 conf_dir = joinpath(build_root, '.scons_config'), 672 log_file = joinpath(build_root, 'scons_config.log'), 673 custom_tests = { 674 'CheckMember' : CheckMember, 675 }) 676 677# Check if we should compile a 64 bit binary on Mac OS X/Darwin 678try: 679 import platform 680 uname = platform.uname() 681 if uname[0] == 'Darwin' and compareVersions(uname[2], '9.0.0') >= 0: 682 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]): 683 main.Append(CCFLAGS=['-arch', 'x86_64']) 684 main.Append(CFLAGS=['-arch', 'x86_64']) 685 main.Append(LINKFLAGS=['-arch', 'x86_64']) 686 main.Append(ASFLAGS=['-arch', 'x86_64']) 687except: 688 pass 689 690# Recent versions of scons substitute a "Null" object for Configure() 691# when configuration isn't necessary, e.g., if the "--help" option is 692# present. Unfortuantely this Null object always returns false, 693# breaking all our configuration checks. We replace it with our own 694# more optimistic null object that returns True instead. 695if not conf: 696 def NullCheck(*args, **kwargs): 697 return True 698 699 class NullConf: 700 def __init__(self, env): 701 self.env = env 702 def Finish(self): 703 return self.env 704 def __getattr__(self, mname): 705 return NullCheck 706 707 conf = NullConf(main) 708 709# Cache build files in the supplied directory. 710if main['M5_BUILD_CACHE']: 711 print('Using build cache located at', main['M5_BUILD_CACHE']) 712 CacheDir(main['M5_BUILD_CACHE']) 713 714main['USE_PYTHON'] = not GetOption('without_python') 715if main['USE_PYTHON']: 716 # Find Python include and library directories for embedding the 717 # interpreter. We rely on python-config to resolve the appropriate 718 # includes and linker flags. ParseConfig does not seem to understand 719 # the more exotic linker flags such as -Xlinker and -export-dynamic so 720 # we add them explicitly below. If you want to link in an alternate 721 # version of python, see above for instructions on how to invoke 722 # scons with the appropriate PATH set. 723 724 python_config = find_first_prog(main['PYTHON_CONFIG']) 725 if python_config is None: 726 print("Error: can't find a suitable python-config, tried %s" % \ 727 main['PYTHON_CONFIG']) 728 Exit(1) 729 730 print("Info: Using Python config: %s" % (python_config, )) 731 py_includes = readCommand([python_config, '--includes'], 732 exception='').split() 733 py_includes = filter(lambda s: match(r'.*\/include\/.*',s), py_includes) 734 # Strip the -I from the include folders before adding them to the 735 # CPPPATH 736 py_includes = map(lambda s: s[2:] if s.startswith('-I') else s, py_includes) 737 main.Append(CPPPATH=py_includes) 738 739 # Read the linker flags and split them into libraries and other link 740 # flags. The libraries are added later through the call the CheckLib. 741 py_ld_flags = readCommand([python_config, '--ldflags'], 742 exception='').split() 743 py_libs = [] 744 for lib in py_ld_flags: 745 if not lib.startswith('-l'): 746 main.Append(LINKFLAGS=[lib]) 747 else: 748 lib = lib[2:] 749 if lib not in py_libs: 750 py_libs.append(lib) 751 752 # verify that this stuff works 753 if not conf.CheckHeader('Python.h', '<>'): 754 print("Error: Check failed for Python.h header in", py_includes) 755 print("Two possible reasons:") 756 print("1. Python headers are not installed (You can install the " 757 "package python-dev on Ubuntu and RedHat)") 758 print("2. SCons is using a wrong C compiler. This can happen if " 759 "CC has the wrong value.") 760 print("CC = %s" % main['CC']) 761 Exit(1) 762 763 for lib in py_libs: 764 if not conf.CheckLib(lib): 765 print("Error: can't find library %s required by python" % lib) 766 Exit(1) 767 768# On Solaris you need to use libsocket for socket ops 769if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'): 770 if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'): 771 print("Can't find library with socket calls (e.g. accept())") 772 Exit(1) 773 774# Check for zlib. If the check passes, libz will be automatically 775# added to the LIBS environment variable. 776if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'): 777 print('Error: did not find needed zlib compression library ' 778 'and/or zlib.h header file.') 779 print(' Please install zlib and try again.') 780 Exit(1) 781 782# If we have the protobuf compiler, also make sure we have the 783# development libraries. If the check passes, libprotobuf will be 784# automatically added to the LIBS environment variable. After 785# this, we can use the HAVE_PROTOBUF flag to determine if we have 786# got both protoc and libprotobuf available. 787main['HAVE_PROTOBUF'] = main['PROTOC'] and \ 788 conf.CheckLibWithHeader('protobuf', 'google/protobuf/message.h', 789 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;') 790 791# Valgrind gets much less confused if you tell it when you're using 792# alternative stacks. 793main['HAVE_VALGRIND'] = conf.CheckCHeader('valgrind/valgrind.h') 794 795# If we have the compiler but not the library, print another warning. 796if main['PROTOC'] and not main['HAVE_PROTOBUF']: 797 print(termcap.Yellow + termcap.Bold + 798 'Warning: did not find protocol buffer library and/or headers.\n' + 799 ' Please install libprotobuf-dev for tracing support.' + 800 termcap.Normal) 801 802# Check for librt. 803have_posix_clock = \ 804 conf.CheckLibWithHeader(None, 'time.h', 'C', 805 'clock_nanosleep(0,0,NULL,NULL);') or \ 806 conf.CheckLibWithHeader('rt', 'time.h', 'C', 807 'clock_nanosleep(0,0,NULL,NULL);') 808 809have_posix_timers = \ 810 conf.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C', 811 'timer_create(CLOCK_MONOTONIC, NULL, NULL);') 812 813if not GetOption('without_tcmalloc'): 814 if conf.CheckLib('tcmalloc'): 815 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 816 elif conf.CheckLib('tcmalloc_minimal'): 817 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 818 else: 819 print(termcap.Yellow + termcap.Bold + 820 "You can get a 12% performance improvement by " 821 "installing tcmalloc (libgoogle-perftools-dev package " 822 "on Ubuntu or RedHat)." + termcap.Normal) 823 824 825# Detect back trace implementations. The last implementation in the 826# list will be used by default. 827backtrace_impls = [ "none" ] 828 829backtrace_checker = 'char temp;' + \ 830 ' backtrace_symbols_fd((void*)&temp, 0, 0);' 831if conf.CheckLibWithHeader(None, 'execinfo.h', 'C', backtrace_checker): 832 backtrace_impls.append("glibc") 833elif conf.CheckLibWithHeader('execinfo', 'execinfo.h', 'C', 834 backtrace_checker): 835 # NetBSD and FreeBSD need libexecinfo. 836 backtrace_impls.append("glibc") 837 main.Append(LIBS=['execinfo']) 838 839if backtrace_impls[-1] == "none": 840 default_backtrace_impl = "none" 841 print(termcap.Yellow + termcap.Bold + 842 "No suitable back trace implementation found." + 843 termcap.Normal) 844 845if not have_posix_clock: 846 print("Can't find library for POSIX clocks.") 847 848# Check for <fenv.h> (C99 FP environment control) 849have_fenv = conf.CheckHeader('fenv.h', '<>') 850if not have_fenv: 851 print("Warning: Header file <fenv.h> not found.") 852 print(" This host has no IEEE FP rounding mode control.") 853 854# Check for <png.h> (libpng library needed if wanting to dump 855# frame buffer image in png format) 856have_png = conf.CheckHeader('png.h', '<>') 857if not have_png: 858 print("Warning: Header file <png.h> not found.") 859 print(" This host has no libpng library.") 860 print(" Disabling support for PNG framebuffers.") 861 862# Check if we should enable KVM-based hardware virtualization. The API 863# we rely on exists since version 2.6.36 of the kernel, but somehow 864# the KVM_API_VERSION does not reflect the change. We test for one of 865# the types as a fall back. 866have_kvm = conf.CheckHeader('linux/kvm.h', '<>') 867if not have_kvm: 868 print("Info: Compatible header file <linux/kvm.h> not found, " 869 "disabling KVM support.") 870 871# Check if the TUN/TAP driver is available. 872have_tuntap = conf.CheckHeader('linux/if_tun.h', '<>') 873if not have_tuntap: 874 print("Info: Compatible header file <linux/if_tun.h> not found.") 875 876# x86 needs support for xsave. We test for the structure here since we 877# won't be able to run new tests by the time we know which ISA we're 878# targeting. 879have_kvm_xsave = conf.CheckTypeSize('struct kvm_xsave', 880 '#include <linux/kvm.h>') != 0 881 882# Check if the requested target ISA is compatible with the host 883def is_isa_kvm_compatible(isa): 884 try: 885 import platform 886 host_isa = platform.machine() 887 except: 888 print("Warning: Failed to determine host ISA.") 889 return False 890 891 if not have_posix_timers: 892 print("Warning: Can not enable KVM, host seems to lack support " 893 "for POSIX timers") 894 return False 895 896 if isa == "arm": 897 return host_isa in ( "armv7l", "aarch64" ) 898 elif isa == "x86": 899 if host_isa != "x86_64": 900 return False 901 902 if not have_kvm_xsave: 903 print("KVM on x86 requires xsave support in kernel headers.") 904 return False 905 906 return True 907 else: 908 return False 909 910 911# Check if the exclude_host attribute is available. We want this to 912# get accurate instruction counts in KVM. 913main['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf.CheckMember( 914 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host') 915 916 917###################################################################### 918# 919# Finish the configuration 920# 921main = conf.Finish() 922 923###################################################################### 924# 925# Collect all non-global variables 926# 927 928# Define the universe of supported ISAs 929all_isa_list = [ ] 930all_gpu_isa_list = [ ] 931Export('all_isa_list') 932Export('all_gpu_isa_list') 933 934class CpuModel(object): 935 '''The CpuModel class encapsulates everything the ISA parser needs to 936 know about a particular CPU model.''' 937 938 # Dict of available CPU model objects. Accessible as CpuModel.dict. 939 dict = {} 940 941 # Constructor. Automatically adds models to CpuModel.dict. 942 def __init__(self, name, default=False): 943 self.name = name # name of model 944 945 # This cpu is enabled by default 946 self.default = default 947 948 # Add self to dict 949 if name in CpuModel.dict: 950 raise AttributeError, "CpuModel '%s' already registered" % name 951 CpuModel.dict[name] = self 952 953Export('CpuModel') 954 955# Sticky variables get saved in the variables file so they persist from 956# one invocation to the next (unless overridden, in which case the new 957# value becomes sticky). 958sticky_vars = Variables(args=ARGUMENTS) 959Export('sticky_vars') 960 961# Sticky variables that should be exported 962export_vars = [] 963Export('export_vars') 964 965# For Ruby 966all_protocols = [] 967Export('all_protocols') 968protocol_dirs = [] 969Export('protocol_dirs') 970slicc_includes = [] 971Export('slicc_includes') 972 973# Walk the tree and execute all SConsopts scripts that wil add to the 974# above variables 975if GetOption('verbose'): 976 print("Reading SConsopts") 977for bdir in [ base_dir ] + extras_dir_list: 978 if not isdir(bdir): 979 print("Error: directory '%s' does not exist" % bdir) 980 Exit(1) 981 for root, dirs, files in os.walk(bdir): 982 if 'SConsopts' in files: 983 if GetOption('verbose'): 984 print("Reading", joinpath(root, 'SConsopts')) 985 SConscript(joinpath(root, 'SConsopts')) 986 987all_isa_list.sort() 988all_gpu_isa_list.sort() 989 990sticky_vars.AddVariables( 991 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list), 992 EnumVariable('TARGET_GPU_ISA', 'Target GPU ISA', 'hsail', all_gpu_isa_list), 993 ListVariable('CPU_MODELS', 'CPU models', 994 sorted(n for n,m in CpuModel.dict.iteritems() if m.default), 995 sorted(CpuModel.dict.keys())), 996 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger', 997 False), 998 BoolVariable('SS_COMPATIBLE_FP', 999 'Make floating-point results compatible with SimpleScalar', 1000 False), 1001 BoolVariable('USE_SSE2', 1002 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts', 1003 False), 1004 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock), 1005 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv), 1006 BoolVariable('USE_PNG', 'Enable support for PNG images', have_png), 1007 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', 1008 False), 1009 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models', 1010 have_kvm), 1011 BoolVariable('USE_TUNTAP', 1012 'Enable using a tap device to bridge to the host network', 1013 have_tuntap), 1014 BoolVariable('BUILD_GPU', 'Build the compute-GPU model', False), 1015 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None', 1016 all_protocols), 1017 EnumVariable('BACKTRACE_IMPL', 'Post-mortem dump implementation', 1018 backtrace_impls[-1], backtrace_impls), 1019 ('NUMBER_BITS_PER_SET', 'Max elements in set (default 64)', 1020 64), 1021 ) 1022 1023# These variables get exported to #defines in config/*.hh (see src/SConscript). 1024export_vars += ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'TARGET_GPU_ISA', 1025 'CP_ANNOTATE', 'USE_POSIX_CLOCK', 'USE_KVM', 'USE_TUNTAP', 1026 'PROTOCOL', 'HAVE_PROTOBUF', 'HAVE_VALGRIND', 1027 'HAVE_PERF_ATTR_EXCLUDE_HOST', 'USE_PNG', 1028 'NUMBER_BITS_PER_SET'] 1029 1030################################################### 1031# 1032# Define a SCons builder for configuration flag headers. 1033# 1034################################################### 1035 1036# This function generates a config header file that #defines the 1037# variable symbol to the current variable setting (0 or 1). The source 1038# operands are the name of the variable and a Value node containing the 1039# value of the variable. 1040def build_config_file(target, source, env): 1041 (variable, value) = [s.get_contents() for s in source] 1042 f = file(str(target[0]), 'w') 1043 print('#define', variable, value, file=f) 1044 f.close() 1045 return None 1046 1047# Combine the two functions into a scons Action object. 1048config_action = MakeAction(build_config_file, Transform("CONFIG H", 2)) 1049 1050# The emitter munges the source & target node lists to reflect what 1051# we're really doing. 1052def config_emitter(target, source, env): 1053 # extract variable name from Builder arg 1054 variable = str(target[0]) 1055 # True target is config header file 1056 target = joinpath('config', variable.lower() + '.hh') 1057 val = env[variable] 1058 if isinstance(val, bool): 1059 # Force value to 0/1 1060 val = int(val) 1061 elif isinstance(val, str): 1062 val = '"' + val + '"' 1063 1064 # Sources are variable name & value (packaged in SCons Value nodes) 1065 return ([target], [Value(variable), Value(val)]) 1066 1067config_builder = Builder(emitter = config_emitter, action = config_action) 1068 1069main.Append(BUILDERS = { 'ConfigFile' : config_builder }) 1070 1071################################################### 1072# 1073# Builders for static and shared partially linked object files. 1074# 1075################################################### 1076 1077partial_static_builder = Builder(action=SCons.Defaults.LinkAction, 1078 src_suffix='$OBJSUFFIX', 1079 src_builder=['StaticObject', 'Object'], 1080 LINKFLAGS='$PLINKFLAGS', 1081 LIBS='') 1082 1083def partial_shared_emitter(target, source, env): 1084 for tgt in target: 1085 tgt.attributes.shared = 1 1086 return (target, source) 1087partial_shared_builder = Builder(action=SCons.Defaults.ShLinkAction, 1088 emitter=partial_shared_emitter, 1089 src_suffix='$SHOBJSUFFIX', 1090 src_builder='SharedObject', 1091 SHLINKFLAGS='$PSHLINKFLAGS', 1092 LIBS='') 1093 1094main.Append(BUILDERS = { 'PartialShared' : partial_shared_builder, 1095 'PartialStatic' : partial_static_builder }) 1096 1097def add_local_rpath(env, *targets): 1098 '''Set up an RPATH for a library which lives in the build directory. 1099 1100 The construction environment variable BIN_RPATH_PREFIX should be set to 1101 the relative path of the build directory starting from the location of the 1102 binary.''' 1103 for target in targets: 1104 target = env.Entry(target) 1105 if not isinstance(target, SCons.Node.FS.Dir): 1106 target = target.dir 1107 relpath = os.path.relpath(target.abspath, env['BUILDDIR']) 1108 components = [ 1109 '\\$$ORIGIN', 1110 '${BIN_RPATH_PREFIX}', 1111 relpath 1112 ] 1113 env.Append(RPATH=[env.Literal(os.path.join(*components))]) 1114 1115if sys.platform != "darwin": 1116 main.Append(LINKFLAGS=Split('-z origin')) 1117 1118main.AddMethod(add_local_rpath, 'AddLocalRPATH') 1119 1120# builds in ext are shared across all configs in the build root. 1121ext_dir = abspath(joinpath(str(main.root), 'ext')) 1122ext_build_dirs = [] 1123for root, dirs, files in os.walk(ext_dir): 1124 if 'SConscript' in files: 1125 build_dir = os.path.relpath(root, ext_dir) 1126 ext_build_dirs.append(build_dir) 1127 main.SConscript(joinpath(root, 'SConscript'), 1128 variant_dir=joinpath(build_root, build_dir)) 1129 1130gdb_xml_dir = joinpath(ext_dir, 'gdb-xml') 1131Export('gdb_xml_dir') 1132 1133main.Prepend(CPPPATH=Dir('ext/pybind11/include/')) 1134 1135################################################### 1136# 1137# This builder and wrapper method are used to set up a directory with 1138# switching headers. Those are headers which are in a generic location and 1139# that include more specific headers from a directory chosen at build time 1140# based on the current build settings. 1141# 1142################################################### 1143 1144def build_switching_header(target, source, env): 1145 path = str(target[0]) 1146 subdir = str(source[0]) 1147 dp, fp = os.path.split(path) 1148 dp = os.path.relpath(os.path.realpath(dp), 1149 os.path.realpath(env['BUILDDIR'])) 1150 with open(path, 'w') as hdr: 1151 print('#include "%s/%s/%s"' % (dp, subdir, fp), file=hdr) 1152 1153switching_header_action = MakeAction(build_switching_header, 1154 Transform('GENERATE')) 1155 1156switching_header_builder = Builder(action=switching_header_action, 1157 source_factory=Value, 1158 single_source=True) 1159 1160main.Append(BUILDERS = { 'SwitchingHeader': switching_header_builder }) 1161 1162def switching_headers(self, headers, source): 1163 for header in headers: 1164 self.SwitchingHeader(header, source) 1165 1166main.AddMethod(switching_headers, 'SwitchingHeaders') 1167 1168################################################### 1169# 1170# Define build environments for selected configurations. 1171# 1172################################################### 1173 1174for variant_path in variant_paths: 1175 if not GetOption('silent'): 1176 print("Building in", variant_path) 1177 1178 # Make a copy of the build-root environment to use for this config. 1179 env = main.Clone() 1180 env['BUILDDIR'] = variant_path 1181 1182 # variant_dir is the tail component of build path, and is used to 1183 # determine the build parameters (e.g., 'ALPHA_SE') 1184 (build_root, variant_dir) = splitpath(variant_path) 1185 1186 # Set env variables according to the build directory config. 1187 sticky_vars.files = [] 1188 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in 1189 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke 1190 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings. 1191 current_vars_file = joinpath(build_root, 'variables', variant_dir) 1192 if isfile(current_vars_file): 1193 sticky_vars.files.append(current_vars_file) 1194 if not GetOption('silent'): 1195 print("Using saved variables file %s" % current_vars_file) 1196 elif variant_dir in ext_build_dirs: 1197 # Things in ext are built without a variant directory. 1198 continue 1199 else: 1200 # Build dir-specific variables file doesn't exist. 1201 1202 # Make sure the directory is there so we can create it later 1203 opt_dir = dirname(current_vars_file) 1204 if not isdir(opt_dir): 1205 mkdir(opt_dir) 1206 1207 # Get default build variables from source tree. Variables are 1208 # normally determined by name of $VARIANT_DIR, but can be 1209 # overridden by '--default=' arg on command line. 1210 default = GetOption('default') 1211 opts_dir = joinpath(main.root.abspath, 'build_opts') 1212 if default: 1213 default_vars_files = [joinpath(build_root, 'variables', default), 1214 joinpath(opts_dir, default)] 1215 else: 1216 default_vars_files = [joinpath(opts_dir, variant_dir)] 1217 existing_files = filter(isfile, default_vars_files) 1218 if existing_files: 1219 default_vars_file = existing_files[0] 1220 sticky_vars.files.append(default_vars_file) 1221 print("Variables file %s not found,\n using defaults in %s" 1222 % (current_vars_file, default_vars_file)) 1223 else: 1224 print("Error: cannot find variables file %s or " 1225 "default file(s) %s" 1226 % (current_vars_file, ' or '.join(default_vars_files))) 1227 Exit(1) 1228 1229 # Apply current variable settings to env 1230 sticky_vars.Update(env) 1231 1232 help_texts["local_vars"] += \ 1233 "Build variables for %s:\n" % variant_dir \ 1234 + sticky_vars.GenerateHelpText(env) 1235 1236 # Process variable settings. 1237 1238 if not have_fenv and env['USE_FENV']: 1239 print("Warning: <fenv.h> not available; " 1240 "forcing USE_FENV to False in", variant_dir + ".") 1241 env['USE_FENV'] = False 1242 1243 if not env['USE_FENV']: 1244 print("Warning: No IEEE FP rounding mode control in", 1245 variant_dir + ".") 1246 print(" FP results may deviate slightly from other platforms.") 1247 1248 if not have_png and env['USE_PNG']: 1249 print("Warning: <png.h> not available; " 1250 "forcing USE_PNG to False in", variant_dir + ".") 1251 env['USE_PNG'] = False 1252 1253 if env['USE_PNG']: 1254 env.Append(LIBS=['png']) 1255 1256 if env['EFENCE']: 1257 env.Append(LIBS=['efence']) 1258 1259 if env['USE_KVM']: 1260 if not have_kvm: 1261 print("Warning: Can not enable KVM, host seems to " 1262 "lack KVM support") 1263 env['USE_KVM'] = False 1264 elif not is_isa_kvm_compatible(env['TARGET_ISA']): 1265 print("Info: KVM support disabled due to unsupported host and " 1266 "target ISA combination") 1267 env['USE_KVM'] = False 1268 1269 if env['USE_TUNTAP']: 1270 if not have_tuntap: 1271 print("Warning: Can't connect EtherTap with a tap device.") 1272 env['USE_TUNTAP'] = False 1273 1274 if env['BUILD_GPU']: 1275 env.Append(CPPDEFINES=['BUILD_GPU']) 1276 1277 # Warn about missing optional functionality 1278 if env['USE_KVM']: 1279 if not main['HAVE_PERF_ATTR_EXCLUDE_HOST']: 1280 print("Warning: perf_event headers lack support for the " 1281 "exclude_host attribute. KVM instruction counts will " 1282 "be inaccurate.") 1283 1284 # Save sticky variable settings back to current variables file 1285 sticky_vars.Save(current_vars_file, env) 1286 1287 if env['USE_SSE2']: 1288 env.Append(CCFLAGS=['-msse2']) 1289
|