1# -*- mode:python -*-
2
3# Copyright (c) 2013, 2015-2017 ARM Limited
4# All rights reserved.
5#
6# The license below extends only to copyright in the software and shall
7# not be construed as granting a license to any other intellectual
8# property including but not limited to intellectual property relating
9# to a hardware implementation of the functionality of the software
10# licensed hereunder. You may use the software subject to the license
11# terms below provided that you ensure that this notice is replicated
12# unmodified and in its entirety in all distributions of the software,
13# modified or unmodified, in source code or in binary form.
14#
15# Copyright (c) 2011 Advanced Micro Devices, Inc.
16# Copyright (c) 2009 The Hewlett-Packard Development Company
17# Copyright (c) 2004-2005 The Regents of The University of Michigan
18# All rights reserved.
19#
20# Redistribution and use in source and binary forms, with or without
21# modification, are permitted provided that the following conditions are
22# met: redistributions of source code must retain the above copyright
23# notice, this list of conditions and the following disclaimer;
24# redistributions in binary form must reproduce the above copyright
25# notice, this list of conditions and the following disclaimer in the
26# documentation and/or other materials provided with the distribution;
27# neither the name of the copyright holders nor the names of its
28# contributors may be used to endorse or promote products derived from
29# this software without specific prior written permission.
30#
31# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
34# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
36# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
37# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
38# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
39# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
40# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
41# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
42#
43# Authors: Steve Reinhardt
44# Nathan Binkert
45
46###################################################
47#
48# SCons top-level build description (SConstruct) file.
49#
50# While in this directory ('gem5'), just type 'scons' to build the default
51# configuration (see below), or type 'scons build/<CONFIG>/<binary>'
52# to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for
53# the optimized full-system version).
54#
55# You can build gem5 in a different directory as long as there is a
56# 'build/<CONFIG>' somewhere along the target path. The build system
57# expects that all configs under the same build directory are being
58# built for the same host system.
59#
60# Examples:
61#
62# The following two commands are equivalent. The '-u' option tells
63# scons to search up the directory tree for this SConstruct file.
64# % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug
65# % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug
66#
67# The following two commands are equivalent and demonstrate building
68# in a directory outside of the source tree. The '-C' option tells
69# scons to chdir to the specified directory to find this SConstruct
70# file.
71# % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug
72# % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug
73#
74# You can use 'scons -H' to print scons options. If you're in this
75# 'gem5' directory (or use -u or -C to tell scons where to find this
76# file), you can use 'scons -h' to print all the gem5-specific build
77# options as well.
78#
79###################################################
80
81# Global Python includes
82import itertools
83import os
84import re
85import shutil
86import subprocess
87import sys
88
89from os import mkdir, environ
90from os.path import abspath, basename, dirname, expanduser, normpath
91from os.path import exists, isdir, isfile
92from os.path import join as joinpath, split as splitpath
93
94# SCons includes
95import SCons
96import SCons.Node
97
98from m5.util import compareVersions, readCommand
99
100help_texts = {
101 "options" : "",
102 "global_vars" : "",
103 "local_vars" : ""
104}
105
106Export("help_texts")
107
108
109# There's a bug in scons in that (1) by default, the help texts from
110# AddOption() are supposed to be displayed when you type 'scons -h'
111# and (2) you can override the help displayed by 'scons -h' using the
112# Help() function, but these two features are incompatible: once
113# you've overridden the help text using Help(), there's no way to get
114# at the help texts from AddOptions. See:
115# http://scons.tigris.org/issues/show_bug.cgi?id=2356
116# http://scons.tigris.org/issues/show_bug.cgi?id=2611
117# This hack lets us extract the help text from AddOptions and
118# re-inject it via Help(). Ideally someday this bug will be fixed and
119# we can just use AddOption directly.
120def AddLocalOption(*args, **kwargs):
121 col_width = 30
122
123 help = " " + ", ".join(args)
124 if "help" in kwargs:
125 length = len(help)
126 if length >= col_width:
127 help += "\n" + " " * col_width
128 else:
129 help += " " * (col_width - length)
130 help += kwargs["help"]
131 help_texts["options"] += help + "\n"
132
133 AddOption(*args, **kwargs)
134
135AddLocalOption('--colors', dest='use_colors', action='store_true',
136 help="Add color to abbreviated scons output")
137AddLocalOption('--no-colors', dest='use_colors', action='store_false',
138 help="Don't add color to abbreviated scons output")
139AddLocalOption('--with-cxx-config', dest='with_cxx_config',
140 action='store_true',
141 help="Build with support for C++-based configuration")
142AddLocalOption('--default', dest='default', type='string', action='store',
143 help='Override which build_opts file to use for defaults')
144AddLocalOption('--ignore-style', dest='ignore_style', action='store_true',
145 help='Disable style checking hooks')
146AddLocalOption('--no-lto', dest='no_lto', action='store_true',
147 help='Disable Link-Time Optimization for fast')
148AddLocalOption('--force-lto', dest='force_lto', action='store_true',
149 help='Use Link-Time Optimization instead of partial linking' +
150 ' when the compiler doesn\'t support using them together.')
151AddLocalOption('--update-ref', dest='update_ref', action='store_true',
152 help='Update test reference outputs')
153AddLocalOption('--verbose', dest='verbose', action='store_true',
154 help='Print full tool command lines')
155AddLocalOption('--without-python', dest='without_python',
156 action='store_true',
157 help='Build without Python configuration support')
158AddLocalOption('--without-tcmalloc', dest='without_tcmalloc',
159 action='store_true',
160 help='Disable linking against tcmalloc')
161AddLocalOption('--with-ubsan', dest='with_ubsan', action='store_true',
162 help='Build with Undefined Behavior Sanitizer if available')
163AddLocalOption('--with-asan', dest='with_asan', action='store_true',
164 help='Build with Address Sanitizer if available')
165
166if GetOption('no_lto') and GetOption('force_lto'):
167 print '--no-lto and --force-lto are mutually exclusive'
168 Exit(1)
169
170########################################################################
171#
172# Set up the main build environment.
173#
174########################################################################
175
176main = Environment()
177
178from gem5_scons import Transform
179from gem5_scons.util import get_termcap
180termcap = get_termcap()
181
182main_dict_keys = main.Dictionary().keys()
183
184# Check that we have a C/C++ compiler
185if not ('CC' in main_dict_keys and 'CXX' in main_dict_keys):
186 print "No C++ compiler installed (package g++ on Ubuntu and RedHat)"
187 Exit(1)
188
189###################################################
190#
191# Figure out which configurations to set up based on the path(s) of
192# the target(s).
193#
194###################################################
195
196# Find default configuration & binary.
197Default(environ.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug'))
198
199# helper function: find last occurrence of element in list
200def rfind(l, elt, offs = -1):
201 for i in range(len(l)+offs, 0, -1):
202 if l[i] == elt:
203 return i
204 raise ValueError, "element not found"
205
206# Take a list of paths (or SCons Nodes) and return a list with all
207# paths made absolute and ~-expanded. Paths will be interpreted
208# relative to the launch directory unless a different root is provided
209def makePathListAbsolute(path_list, root=GetLaunchDir()):
210 return [abspath(joinpath(root, expanduser(str(p))))
211 for p in path_list]
212
213# Each target must have 'build' in the interior of the path; the
214# directory below this will determine the build parameters. For
215# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
216# recognize that ALPHA_SE specifies the configuration because it
217# follow 'build' in the build path.
218
219# The funky assignment to "[:]" is needed to replace the list contents
220# in place rather than reassign the symbol to a new list, which
221# doesn't work (obviously!).
222BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS)
223
224# Generate a list of the unique build roots and configs that the
225# collected targets reference.
226variant_paths = []
227build_root = None
228for t in BUILD_TARGETS:
229 path_dirs = t.split('/')
230 try:
231 build_top = rfind(path_dirs, 'build', -2)
232 except:
233 print "Error: no non-leaf 'build' dir found on target path", t
234 Exit(1)
235 this_build_root = joinpath('/',*path_dirs[:build_top+1])
236 if not build_root:
237 build_root = this_build_root
238 else:
239 if this_build_root != build_root:
240 print "Error: build targets not under same build root\n"\
241 " %s\n %s" % (build_root, this_build_root)
242 Exit(1)
243 variant_path = joinpath('/',*path_dirs[:build_top+2])
244 if variant_path not in variant_paths:
245 variant_paths.append(variant_path)
246
247# Make sure build_root exists (might not if this is the first build there)
248if not isdir(build_root):
249 mkdir(build_root)
250main['BUILDROOT'] = build_root
251
252Export('main')
253
254main.SConsignFile(joinpath(build_root, "sconsign"))
255
256# Default duplicate option is to use hard links, but this messes up
257# when you use emacs to edit a file in the target dir, as emacs moves
258# file to file~ then copies to file, breaking the link. Symbolic
259# (soft) links work better.
260main.SetOption('duplicate', 'soft-copy')
261
262#
263# Set up global sticky variables... these are common to an entire build
264# tree (not specific to a particular build like ALPHA_SE)
265#
266
267global_vars_file = joinpath(build_root, 'variables.global')
268
269global_vars = Variables(global_vars_file, args=ARGUMENTS)
270
271global_vars.AddVariables(
272 ('CC', 'C compiler', environ.get('CC', main['CC'])),
273 ('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])),
274 ('PROTOC', 'protoc tool', environ.get('PROTOC', 'protoc')),
275 ('BATCH', 'Use batch pool for build and tests', False),
276 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
277 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False),
278 ('EXTRAS', 'Add extra directories to the compilation', '')
279 )
280
281# Update main environment with values from ARGUMENTS & global_vars_file
282global_vars.Update(main)
283help_texts["global_vars"] += global_vars.GenerateHelpText(main)
284
285# Save sticky variable settings back to current variables file
286global_vars.Save(global_vars_file, main)
287
288# Parse EXTRAS variable to build list of all directories where we're
289# look for sources etc. This list is exported as extras_dir_list.
290base_dir = main.srcdir.abspath
291if main['EXTRAS']:
292 extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':'))
293else:
294 extras_dir_list = []
295
296Export('base_dir')
297Export('extras_dir_list')
298
299# the ext directory should be on the #includes path
300main.Append(CPPPATH=[Dir('ext')])
301
302# Add shared top-level headers
303main.Prepend(CPPPATH=Dir('include'))
304
305if GetOption('verbose'):
306 def MakeAction(action, string, *args, **kwargs):
307 return Action(action, *args, **kwargs)
308else:
309 MakeAction = Action
310 main['CCCOMSTR'] = Transform("CC")
311 main['CXXCOMSTR'] = Transform("CXX")
312 main['ASCOMSTR'] = Transform("AS")
313 main['ARCOMSTR'] = Transform("AR", 0)
314 main['LINKCOMSTR'] = Transform("LINK", 0)
315 main['SHLINKCOMSTR'] = Transform("SHLINK", 0)
316 main['RANLIBCOMSTR'] = Transform("RANLIB", 0)
317 main['M4COMSTR'] = Transform("M4")
318 main['SHCCCOMSTR'] = Transform("SHCC")
319 main['SHCXXCOMSTR'] = Transform("SHCXX")
320Export('MakeAction')
321
322# Initialize the Link-Time Optimization (LTO) flags
323main['LTO_CCFLAGS'] = []
324main['LTO_LDFLAGS'] = []
325
326# According to the readme, tcmalloc works best if the compiler doesn't
327# assume that we're using the builtin malloc and friends. These flags
328# are compiler-specific, so we need to set them after we detect which
329# compiler we're using.
330main['TCMALLOC_CCFLAGS'] = []
331
332CXX_version = readCommand([main['CXX'],'--version'], exception=False)
333CXX_V = readCommand([main['CXX'],'-V'], exception=False)
334
335main['GCC'] = CXX_version and CXX_version.find('g++') >= 0
336main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0
337if main['GCC'] + main['CLANG'] > 1:
338 print 'Error: How can we have two at the same time?'
339 Exit(1)
340
341# Set up default C++ compiler flags
342if main['GCC'] or main['CLANG']:
343 # As gcc and clang share many flags, do the common parts here
344 main.Append(CCFLAGS=['-pipe'])
345 main.Append(CCFLAGS=['-fno-strict-aliasing'])
346 # Enable -Wall and -Wextra and then disable the few warnings that
347 # we consistently violate
348 main.Append(CCFLAGS=['-Wall', '-Wundef', '-Wextra',
349 '-Wno-sign-compare', '-Wno-unused-parameter'])
350 # We always compile using C++11
351 main.Append(CXXFLAGS=['-std=c++11'])
352 if sys.platform.startswith('freebsd'):
353 main.Append(CCFLAGS=['-I/usr/local/include'])
354 main.Append(CXXFLAGS=['-I/usr/local/include'])
355
356 main['FILTER_PSHLINKFLAGS'] = lambda x: str(x).replace(' -shared', '')
357 main['PSHLINKFLAGS'] = main.subst('${FILTER_PSHLINKFLAGS(SHLINKFLAGS)}')
358 main['PLINKFLAGS'] = main.subst('${LINKFLAGS}')
359 shared_partial_flags = ['-r', '-nostdlib']
360 main.Append(PSHLINKFLAGS=shared_partial_flags)
361 main.Append(PLINKFLAGS=shared_partial_flags)
| 1# -*- mode:python -*-
2
3# Copyright (c) 2013, 2015-2017 ARM Limited
4# All rights reserved.
5#
6# The license below extends only to copyright in the software and shall
7# not be construed as granting a license to any other intellectual
8# property including but not limited to intellectual property relating
9# to a hardware implementation of the functionality of the software
10# licensed hereunder. You may use the software subject to the license
11# terms below provided that you ensure that this notice is replicated
12# unmodified and in its entirety in all distributions of the software,
13# modified or unmodified, in source code or in binary form.
14#
15# Copyright (c) 2011 Advanced Micro Devices, Inc.
16# Copyright (c) 2009 The Hewlett-Packard Development Company
17# Copyright (c) 2004-2005 The Regents of The University of Michigan
18# All rights reserved.
19#
20# Redistribution and use in source and binary forms, with or without
21# modification, are permitted provided that the following conditions are
22# met: redistributions of source code must retain the above copyright
23# notice, this list of conditions and the following disclaimer;
24# redistributions in binary form must reproduce the above copyright
25# notice, this list of conditions and the following disclaimer in the
26# documentation and/or other materials provided with the distribution;
27# neither the name of the copyright holders nor the names of its
28# contributors may be used to endorse or promote products derived from
29# this software without specific prior written permission.
30#
31# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
34# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
36# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
37# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
38# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
39# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
40# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
41# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
42#
43# Authors: Steve Reinhardt
44# Nathan Binkert
45
46###################################################
47#
48# SCons top-level build description (SConstruct) file.
49#
50# While in this directory ('gem5'), just type 'scons' to build the default
51# configuration (see below), or type 'scons build/<CONFIG>/<binary>'
52# to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for
53# the optimized full-system version).
54#
55# You can build gem5 in a different directory as long as there is a
56# 'build/<CONFIG>' somewhere along the target path. The build system
57# expects that all configs under the same build directory are being
58# built for the same host system.
59#
60# Examples:
61#
62# The following two commands are equivalent. The '-u' option tells
63# scons to search up the directory tree for this SConstruct file.
64# % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug
65# % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug
66#
67# The following two commands are equivalent and demonstrate building
68# in a directory outside of the source tree. The '-C' option tells
69# scons to chdir to the specified directory to find this SConstruct
70# file.
71# % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug
72# % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug
73#
74# You can use 'scons -H' to print scons options. If you're in this
75# 'gem5' directory (or use -u or -C to tell scons where to find this
76# file), you can use 'scons -h' to print all the gem5-specific build
77# options as well.
78#
79###################################################
80
81# Global Python includes
82import itertools
83import os
84import re
85import shutil
86import subprocess
87import sys
88
89from os import mkdir, environ
90from os.path import abspath, basename, dirname, expanduser, normpath
91from os.path import exists, isdir, isfile
92from os.path import join as joinpath, split as splitpath
93
94# SCons includes
95import SCons
96import SCons.Node
97
98from m5.util import compareVersions, readCommand
99
100help_texts = {
101 "options" : "",
102 "global_vars" : "",
103 "local_vars" : ""
104}
105
106Export("help_texts")
107
108
109# There's a bug in scons in that (1) by default, the help texts from
110# AddOption() are supposed to be displayed when you type 'scons -h'
111# and (2) you can override the help displayed by 'scons -h' using the
112# Help() function, but these two features are incompatible: once
113# you've overridden the help text using Help(), there's no way to get
114# at the help texts from AddOptions. See:
115# http://scons.tigris.org/issues/show_bug.cgi?id=2356
116# http://scons.tigris.org/issues/show_bug.cgi?id=2611
117# This hack lets us extract the help text from AddOptions and
118# re-inject it via Help(). Ideally someday this bug will be fixed and
119# we can just use AddOption directly.
120def AddLocalOption(*args, **kwargs):
121 col_width = 30
122
123 help = " " + ", ".join(args)
124 if "help" in kwargs:
125 length = len(help)
126 if length >= col_width:
127 help += "\n" + " " * col_width
128 else:
129 help += " " * (col_width - length)
130 help += kwargs["help"]
131 help_texts["options"] += help + "\n"
132
133 AddOption(*args, **kwargs)
134
135AddLocalOption('--colors', dest='use_colors', action='store_true',
136 help="Add color to abbreviated scons output")
137AddLocalOption('--no-colors', dest='use_colors', action='store_false',
138 help="Don't add color to abbreviated scons output")
139AddLocalOption('--with-cxx-config', dest='with_cxx_config',
140 action='store_true',
141 help="Build with support for C++-based configuration")
142AddLocalOption('--default', dest='default', type='string', action='store',
143 help='Override which build_opts file to use for defaults')
144AddLocalOption('--ignore-style', dest='ignore_style', action='store_true',
145 help='Disable style checking hooks')
146AddLocalOption('--no-lto', dest='no_lto', action='store_true',
147 help='Disable Link-Time Optimization for fast')
148AddLocalOption('--force-lto', dest='force_lto', action='store_true',
149 help='Use Link-Time Optimization instead of partial linking' +
150 ' when the compiler doesn\'t support using them together.')
151AddLocalOption('--update-ref', dest='update_ref', action='store_true',
152 help='Update test reference outputs')
153AddLocalOption('--verbose', dest='verbose', action='store_true',
154 help='Print full tool command lines')
155AddLocalOption('--without-python', dest='without_python',
156 action='store_true',
157 help='Build without Python configuration support')
158AddLocalOption('--without-tcmalloc', dest='without_tcmalloc',
159 action='store_true',
160 help='Disable linking against tcmalloc')
161AddLocalOption('--with-ubsan', dest='with_ubsan', action='store_true',
162 help='Build with Undefined Behavior Sanitizer if available')
163AddLocalOption('--with-asan', dest='with_asan', action='store_true',
164 help='Build with Address Sanitizer if available')
165
166if GetOption('no_lto') and GetOption('force_lto'):
167 print '--no-lto and --force-lto are mutually exclusive'
168 Exit(1)
169
170########################################################################
171#
172# Set up the main build environment.
173#
174########################################################################
175
176main = Environment()
177
178from gem5_scons import Transform
179from gem5_scons.util import get_termcap
180termcap = get_termcap()
181
182main_dict_keys = main.Dictionary().keys()
183
184# Check that we have a C/C++ compiler
185if not ('CC' in main_dict_keys and 'CXX' in main_dict_keys):
186 print "No C++ compiler installed (package g++ on Ubuntu and RedHat)"
187 Exit(1)
188
189###################################################
190#
191# Figure out which configurations to set up based on the path(s) of
192# the target(s).
193#
194###################################################
195
196# Find default configuration & binary.
197Default(environ.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug'))
198
199# helper function: find last occurrence of element in list
200def rfind(l, elt, offs = -1):
201 for i in range(len(l)+offs, 0, -1):
202 if l[i] == elt:
203 return i
204 raise ValueError, "element not found"
205
206# Take a list of paths (or SCons Nodes) and return a list with all
207# paths made absolute and ~-expanded. Paths will be interpreted
208# relative to the launch directory unless a different root is provided
209def makePathListAbsolute(path_list, root=GetLaunchDir()):
210 return [abspath(joinpath(root, expanduser(str(p))))
211 for p in path_list]
212
213# Each target must have 'build' in the interior of the path; the
214# directory below this will determine the build parameters. For
215# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
216# recognize that ALPHA_SE specifies the configuration because it
217# follow 'build' in the build path.
218
219# The funky assignment to "[:]" is needed to replace the list contents
220# in place rather than reassign the symbol to a new list, which
221# doesn't work (obviously!).
222BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS)
223
224# Generate a list of the unique build roots and configs that the
225# collected targets reference.
226variant_paths = []
227build_root = None
228for t in BUILD_TARGETS:
229 path_dirs = t.split('/')
230 try:
231 build_top = rfind(path_dirs, 'build', -2)
232 except:
233 print "Error: no non-leaf 'build' dir found on target path", t
234 Exit(1)
235 this_build_root = joinpath('/',*path_dirs[:build_top+1])
236 if not build_root:
237 build_root = this_build_root
238 else:
239 if this_build_root != build_root:
240 print "Error: build targets not under same build root\n"\
241 " %s\n %s" % (build_root, this_build_root)
242 Exit(1)
243 variant_path = joinpath('/',*path_dirs[:build_top+2])
244 if variant_path not in variant_paths:
245 variant_paths.append(variant_path)
246
247# Make sure build_root exists (might not if this is the first build there)
248if not isdir(build_root):
249 mkdir(build_root)
250main['BUILDROOT'] = build_root
251
252Export('main')
253
254main.SConsignFile(joinpath(build_root, "sconsign"))
255
256# Default duplicate option is to use hard links, but this messes up
257# when you use emacs to edit a file in the target dir, as emacs moves
258# file to file~ then copies to file, breaking the link. Symbolic
259# (soft) links work better.
260main.SetOption('duplicate', 'soft-copy')
261
262#
263# Set up global sticky variables... these are common to an entire build
264# tree (not specific to a particular build like ALPHA_SE)
265#
266
267global_vars_file = joinpath(build_root, 'variables.global')
268
269global_vars = Variables(global_vars_file, args=ARGUMENTS)
270
271global_vars.AddVariables(
272 ('CC', 'C compiler', environ.get('CC', main['CC'])),
273 ('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])),
274 ('PROTOC', 'protoc tool', environ.get('PROTOC', 'protoc')),
275 ('BATCH', 'Use batch pool for build and tests', False),
276 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
277 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False),
278 ('EXTRAS', 'Add extra directories to the compilation', '')
279 )
280
281# Update main environment with values from ARGUMENTS & global_vars_file
282global_vars.Update(main)
283help_texts["global_vars"] += global_vars.GenerateHelpText(main)
284
285# Save sticky variable settings back to current variables file
286global_vars.Save(global_vars_file, main)
287
288# Parse EXTRAS variable to build list of all directories where we're
289# look for sources etc. This list is exported as extras_dir_list.
290base_dir = main.srcdir.abspath
291if main['EXTRAS']:
292 extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':'))
293else:
294 extras_dir_list = []
295
296Export('base_dir')
297Export('extras_dir_list')
298
299# the ext directory should be on the #includes path
300main.Append(CPPPATH=[Dir('ext')])
301
302# Add shared top-level headers
303main.Prepend(CPPPATH=Dir('include'))
304
305if GetOption('verbose'):
306 def MakeAction(action, string, *args, **kwargs):
307 return Action(action, *args, **kwargs)
308else:
309 MakeAction = Action
310 main['CCCOMSTR'] = Transform("CC")
311 main['CXXCOMSTR'] = Transform("CXX")
312 main['ASCOMSTR'] = Transform("AS")
313 main['ARCOMSTR'] = Transform("AR", 0)
314 main['LINKCOMSTR'] = Transform("LINK", 0)
315 main['SHLINKCOMSTR'] = Transform("SHLINK", 0)
316 main['RANLIBCOMSTR'] = Transform("RANLIB", 0)
317 main['M4COMSTR'] = Transform("M4")
318 main['SHCCCOMSTR'] = Transform("SHCC")
319 main['SHCXXCOMSTR'] = Transform("SHCXX")
320Export('MakeAction')
321
322# Initialize the Link-Time Optimization (LTO) flags
323main['LTO_CCFLAGS'] = []
324main['LTO_LDFLAGS'] = []
325
326# According to the readme, tcmalloc works best if the compiler doesn't
327# assume that we're using the builtin malloc and friends. These flags
328# are compiler-specific, so we need to set them after we detect which
329# compiler we're using.
330main['TCMALLOC_CCFLAGS'] = []
331
332CXX_version = readCommand([main['CXX'],'--version'], exception=False)
333CXX_V = readCommand([main['CXX'],'-V'], exception=False)
334
335main['GCC'] = CXX_version and CXX_version.find('g++') >= 0
336main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0
337if main['GCC'] + main['CLANG'] > 1:
338 print 'Error: How can we have two at the same time?'
339 Exit(1)
340
341# Set up default C++ compiler flags
342if main['GCC'] or main['CLANG']:
343 # As gcc and clang share many flags, do the common parts here
344 main.Append(CCFLAGS=['-pipe'])
345 main.Append(CCFLAGS=['-fno-strict-aliasing'])
346 # Enable -Wall and -Wextra and then disable the few warnings that
347 # we consistently violate
348 main.Append(CCFLAGS=['-Wall', '-Wundef', '-Wextra',
349 '-Wno-sign-compare', '-Wno-unused-parameter'])
350 # We always compile using C++11
351 main.Append(CXXFLAGS=['-std=c++11'])
352 if sys.platform.startswith('freebsd'):
353 main.Append(CCFLAGS=['-I/usr/local/include'])
354 main.Append(CXXFLAGS=['-I/usr/local/include'])
355
356 main['FILTER_PSHLINKFLAGS'] = lambda x: str(x).replace(' -shared', '')
357 main['PSHLINKFLAGS'] = main.subst('${FILTER_PSHLINKFLAGS(SHLINKFLAGS)}')
358 main['PLINKFLAGS'] = main.subst('${LINKFLAGS}')
359 shared_partial_flags = ['-r', '-nostdlib']
360 main.Append(PSHLINKFLAGS=shared_partial_flags)
361 main.Append(PLINKFLAGS=shared_partial_flags)
|
362else:
363 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal,
364 print "Don't know what compiler options to use for your compiler."
365 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX']
366 print termcap.Yellow + ' version:' + termcap.Normal,
367 if not CXX_version:
368 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\
369 termcap.Normal
370 else:
371 print CXX_version.replace('\n', '<nl>')
372 print " If you're trying to use a compiler other than GCC"
373 print " or clang, there appears to be something wrong with your"
374 print " environment."
375 print " "
376 print " If you are trying to use a compiler other than those listed"
377 print " above you will need to ease fix SConstruct and "
378 print " src/SConscript to support that compiler."
379 Exit(1)
380
381if main['GCC']:
382 # Check for a supported version of gcc. >= 4.8 is chosen for its
383 # level of c++11 support. See
384 # http://gcc.gnu.org/projects/cxx0x.html for details.
385 gcc_version = readCommand([main['CXX'], '-dumpversion'], exception=False)
386 if compareVersions(gcc_version, "4.8") < 0:
387 print 'Error: gcc version 4.8 or newer required.'
388 print ' Installed version:', gcc_version
389 Exit(1)
390
391 main['GCC_VERSION'] = gcc_version
392
393 if compareVersions(gcc_version, '4.9') >= 0:
394 # Incremental linking with LTO is currently broken in gcc versions
395 # 4.9 and above. A version where everything works completely hasn't
396 # yet been identified.
397 #
398 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67548
399 main['BROKEN_INCREMENTAL_LTO'] = True
400 if compareVersions(gcc_version, '6.0') >= 0:
401 # gcc versions 6.0 and greater accept an -flinker-output flag which
402 # selects what type of output the linker should generate. This is
403 # necessary for incremental lto to work, but is also broken in
404 # current versions of gcc. It may not be necessary in future
405 # versions. We add it here since it might be, and as a reminder that
406 # it exists. It's excluded if lto is being forced.
407 #
408 # https://gcc.gnu.org/gcc-6/changes.html
409 # https://gcc.gnu.org/ml/gcc-patches/2015-11/msg03161.html
410 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69866
411 if not GetOption('force_lto'):
412 main.Append(PSHLINKFLAGS='-flinker-output=rel')
413 main.Append(PLINKFLAGS='-flinker-output=rel')
414
415 # gcc from version 4.8 and above generates "rep; ret" instructions
416 # to avoid performance penalties on certain AMD chips. Older
417 # assemblers detect this as an error, "Error: expecting string
418 # instruction after `rep'"
419 as_version_raw = readCommand([main['AS'], '-v', '/dev/null',
420 '-o', '/dev/null'],
421 exception=False).split()
422
423 # version strings may contain extra distro-specific
424 # qualifiers, so play it safe and keep only what comes before
425 # the first hyphen
426 as_version = as_version_raw[-1].split('-')[0] if as_version_raw else None
427
428 if not as_version or compareVersions(as_version, "2.23") < 0:
429 print termcap.Yellow + termcap.Bold + \
430 'Warning: This combination of gcc and binutils have' + \
431 ' known incompatibilities.\n' + \
432 ' If you encounter build problems, please update ' + \
433 'binutils to 2.23.' + \
434 termcap.Normal
435
436 # Make sure we warn if the user has requested to compile with the
437 # Undefined Benahvior Sanitizer and this version of gcc does not
438 # support it.
439 if GetOption('with_ubsan') and \
440 compareVersions(gcc_version, '4.9') < 0:
441 print termcap.Yellow + termcap.Bold + \
442 'Warning: UBSan is only supported using gcc 4.9 and later.' + \
443 termcap.Normal
444
445 disable_lto = GetOption('no_lto')
446 if not disable_lto and main.get('BROKEN_INCREMENTAL_LTO', False) and \
447 not GetOption('force_lto'):
448 print termcap.Yellow + termcap.Bold + \
449 'Warning: Your compiler doesn\'t support incremental linking' + \
450 ' and lto at the same time, so lto is being disabled. To force' + \
451 ' lto on anyway, use the --force-lto option. That will disable' + \
452 ' partial linking.' + \
453 termcap.Normal
454 disable_lto = True
455
456 # Add the appropriate Link-Time Optimization (LTO) flags
457 # unless LTO is explicitly turned off. Note that these flags
458 # are only used by the fast target.
459 if not disable_lto:
460 # Pass the LTO flag when compiling to produce GIMPLE
461 # output, we merely create the flags here and only append
462 # them later
463 main['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')]
464
465 # Use the same amount of jobs for LTO as we are running
466 # scons with
467 main['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')]
468
469 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin-malloc', '-fno-builtin-calloc',
470 '-fno-builtin-realloc', '-fno-builtin-free'])
471
472 # add option to check for undeclared overrides
473 if compareVersions(gcc_version, "5.0") > 0:
474 main.Append(CCFLAGS=['-Wno-error=suggest-override'])
475
476 # The address sanitizer is available for gcc >= 4.8
477 if GetOption('with_asan'):
478 if GetOption('with_ubsan') and \
479 compareVersions(env['GCC_VERSION'], '4.9') >= 0:
480 env.Append(CCFLAGS=['-fsanitize=address,undefined',
481 '-fno-omit-frame-pointer'],
482 LINKFLAGS='-fsanitize=address,undefined')
483 else:
484 env.Append(CCFLAGS=['-fsanitize=address',
485 '-fno-omit-frame-pointer'],
486 LINKFLAGS='-fsanitize=address')
487 # Only gcc >= 4.9 supports UBSan, so check both the version
488 # and the command-line option before adding the compiler and
489 # linker flags.
490 elif GetOption('with_ubsan') and \
491 compareVersions(env['GCC_VERSION'], '4.9') >= 0:
492 env.Append(CCFLAGS='-fsanitize=undefined')
493 env.Append(LINKFLAGS='-fsanitize=undefined')
494
495elif main['CLANG']:
496 # Check for a supported version of clang, >= 3.1 is needed to
497 # support similar features as gcc 4.8. See
498 # http://clang.llvm.org/cxx_status.html for details
499 clang_version_re = re.compile(".* version (\d+\.\d+)")
500 clang_version_match = clang_version_re.search(CXX_version)
501 if (clang_version_match):
502 clang_version = clang_version_match.groups()[0]
503 if compareVersions(clang_version, "3.1") < 0:
504 print 'Error: clang version 3.1 or newer required.'
505 print ' Installed version:', clang_version
506 Exit(1)
507 else:
508 print 'Error: Unable to determine clang version.'
509 Exit(1)
510
511 # clang has a few additional warnings that we disable, extraneous
512 # parantheses are allowed due to Ruby's printing of the AST,
513 # finally self assignments are allowed as the generated CPU code
514 # is relying on this
515 main.Append(CCFLAGS=['-Wno-parentheses',
516 '-Wno-self-assign',
517 # Some versions of libstdc++ (4.8?) seem to
518 # use struct hash and class hash
519 # interchangeably.
520 '-Wno-mismatched-tags',
521 ])
522
523 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin'])
524
525 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as
526 # opposed to libstdc++, as the later is dated.
527 if sys.platform == "darwin":
528 main.Append(CXXFLAGS=['-stdlib=libc++'])
529 main.Append(LIBS=['c++'])
530
531 # On FreeBSD we need libthr.
532 if sys.platform.startswith('freebsd'):
533 main.Append(LIBS=['thr'])
534
535 # We require clang >= 3.1, so there is no need to check any
536 # versions here.
537 if GetOption('with_ubsan'):
538 if GetOption('with_asan'):
539 env.Append(CCFLAGS=['-fsanitize=address,undefined',
540 '-fno-omit-frame-pointer'],
541 LINKFLAGS='-fsanitize=address,undefined')
542 else:
543 env.Append(CCFLAGS='-fsanitize=undefined',
544 LINKFLAGS='-fsanitize=undefined')
545
546 elif GetOption('with_asan'):
547 env.Append(CCFLAGS=['-fsanitize=address',
548 '-fno-omit-frame-pointer'],
549 LINKFLAGS='-fsanitize=address')
550
551else:
552 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal,
553 print "Don't know what compiler options to use for your compiler."
554 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX']
555 print termcap.Yellow + ' version:' + termcap.Normal,
556 if not CXX_version:
557 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\
558 termcap.Normal
559 else:
560 print CXX_version.replace('\n', '<nl>')
561 print " If you're trying to use a compiler other than GCC"
562 print " or clang, there appears to be something wrong with your"
563 print " environment."
564 print " "
565 print " If you are trying to use a compiler other than those listed"
566 print " above you will need to ease fix SConstruct and "
567 print " src/SConscript to support that compiler."
568 Exit(1)
569
570# Set up common yacc/bison flags (needed for Ruby)
571main['YACCFLAGS'] = '-d'
572main['YACCHXXFILESUFFIX'] = '.hh'
573
574# Do this after we save setting back, or else we'll tack on an
575# extra 'qdo' every time we run scons.
576if main['BATCH']:
577 main['CC'] = main['BATCH_CMD'] + ' ' + main['CC']
578 main['CXX'] = main['BATCH_CMD'] + ' ' + main['CXX']
579 main['AS'] = main['BATCH_CMD'] + ' ' + main['AS']
580 main['AR'] = main['BATCH_CMD'] + ' ' + main['AR']
581 main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB']
582
583if sys.platform == 'cygwin':
584 # cygwin has some header file issues...
585 main.Append(CCFLAGS=["-Wno-uninitialized"])
586
587# Check for the protobuf compiler
588protoc_version = readCommand([main['PROTOC'], '--version'],
589 exception='').split()
590
591# First two words should be "libprotoc x.y.z"
592if len(protoc_version) < 2 or protoc_version[0] != 'libprotoc':
593 print termcap.Yellow + termcap.Bold + \
594 'Warning: Protocol buffer compiler (protoc) not found.\n' + \
595 ' Please install protobuf-compiler for tracing support.' + \
596 termcap.Normal
597 main['PROTOC'] = False
598else:
599 # Based on the availability of the compress stream wrappers,
600 # require 2.1.0
601 min_protoc_version = '2.1.0'
602 if compareVersions(protoc_version[1], min_protoc_version) < 0:
603 print termcap.Yellow + termcap.Bold + \
604 'Warning: protoc version', min_protoc_version, \
605 'or newer required.\n' + \
606 ' Installed version:', protoc_version[1], \
607 termcap.Normal
608 main['PROTOC'] = False
609 else:
610 # Attempt to determine the appropriate include path and
611 # library path using pkg-config, that means we also need to
612 # check for pkg-config. Note that it is possible to use
613 # protobuf without the involvement of pkg-config. Later on we
614 # check go a library config check and at that point the test
615 # will fail if libprotobuf cannot be found.
616 if readCommand(['pkg-config', '--version'], exception=''):
617 try:
618 # Attempt to establish what linking flags to add for protobuf
619 # using pkg-config
620 main.ParseConfig('pkg-config --cflags --libs-only-L protobuf')
621 except:
622 print termcap.Yellow + termcap.Bold + \
623 'Warning: pkg-config could not get protobuf flags.' + \
624 termcap.Normal
625
626
627# Check for 'timeout' from GNU coreutils. If present, regressions will
628# be run with a time limit. We require version 8.13 since we rely on
629# support for the '--foreground' option.
630if sys.platform.startswith('freebsd'):
631 timeout_lines = readCommand(['gtimeout', '--version'],
632 exception='').splitlines()
633else:
634 timeout_lines = readCommand(['timeout', '--version'],
635 exception='').splitlines()
636# Get the first line and tokenize it
637timeout_version = timeout_lines[0].split() if timeout_lines else []
638main['TIMEOUT'] = timeout_version and \
639 compareVersions(timeout_version[-1], '8.13') >= 0
640
641# Add a custom Check function to test for structure members.
642def CheckMember(context, include, decl, member, include_quotes="<>"):
643 context.Message("Checking for member %s in %s..." %
644 (member, decl))
645 text = """
646#include %(header)s
647int main(){
648 %(decl)s test;
649 (void)test.%(member)s;
650 return 0;
651};
652""" % { "header" : include_quotes[0] + include + include_quotes[1],
653 "decl" : decl,
654 "member" : member,
655 }
656
657 ret = context.TryCompile(text, extension=".cc")
658 context.Result(ret)
659 return ret
660
661# Platform-specific configuration. Note again that we assume that all
662# builds under a given build root run on the same host platform.
663conf = Configure(main,
664 conf_dir = joinpath(build_root, '.scons_config'),
665 log_file = joinpath(build_root, 'scons_config.log'),
666 custom_tests = {
667 'CheckMember' : CheckMember,
668 })
669
670# Check if we should compile a 64 bit binary on Mac OS X/Darwin
671try:
672 import platform
673 uname = platform.uname()
674 if uname[0] == 'Darwin' and compareVersions(uname[2], '9.0.0') >= 0:
675 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]):
676 main.Append(CCFLAGS=['-arch', 'x86_64'])
677 main.Append(CFLAGS=['-arch', 'x86_64'])
678 main.Append(LINKFLAGS=['-arch', 'x86_64'])
679 main.Append(ASFLAGS=['-arch', 'x86_64'])
680except:
681 pass
682
683# Recent versions of scons substitute a "Null" object for Configure()
684# when configuration isn't necessary, e.g., if the "--help" option is
685# present. Unfortuantely this Null object always returns false,
686# breaking all our configuration checks. We replace it with our own
687# more optimistic null object that returns True instead.
688if not conf:
689 def NullCheck(*args, **kwargs):
690 return True
691
692 class NullConf:
693 def __init__(self, env):
694 self.env = env
695 def Finish(self):
696 return self.env
697 def __getattr__(self, mname):
698 return NullCheck
699
700 conf = NullConf(main)
701
702# Cache build files in the supplied directory.
703if main['M5_BUILD_CACHE']:
704 print 'Using build cache located at', main['M5_BUILD_CACHE']
705 CacheDir(main['M5_BUILD_CACHE'])
706
707main['USE_PYTHON'] = not GetOption('without_python')
708if main['USE_PYTHON']:
709 # Find Python include and library directories for embedding the
710 # interpreter. We rely on python-config to resolve the appropriate
711 # includes and linker flags. ParseConfig does not seem to understand
712 # the more exotic linker flags such as -Xlinker and -export-dynamic so
713 # we add them explicitly below. If you want to link in an alternate
714 # version of python, see above for instructions on how to invoke
715 # scons with the appropriate PATH set.
716 #
717 # First we check if python2-config exists, else we use python-config
718 python_config = readCommand(['which', 'python2-config'],
719 exception='').strip()
720 if not os.path.exists(python_config):
721 python_config = readCommand(['which', 'python-config'],
722 exception='').strip()
723 py_includes = readCommand([python_config, '--includes'],
724 exception='').split()
725 # Strip the -I from the include folders before adding them to the
726 # CPPPATH
727 main.Append(CPPPATH=map(lambda inc: inc[2:], py_includes))
728
729 # Read the linker flags and split them into libraries and other link
730 # flags. The libraries are added later through the call the CheckLib.
731 py_ld_flags = readCommand([python_config, '--ldflags'],
732 exception='').split()
733 py_libs = []
734 for lib in py_ld_flags:
735 if not lib.startswith('-l'):
736 main.Append(LINKFLAGS=[lib])
737 else:
738 lib = lib[2:]
739 if lib not in py_libs:
740 py_libs.append(lib)
741
742 # verify that this stuff works
743 if not conf.CheckHeader('Python.h', '<>'):
744 print "Error: can't find Python.h header in", py_includes
745 print "Install Python headers (package python-dev on Ubuntu and RedHat)"
746 Exit(1)
747
748 for lib in py_libs:
749 if not conf.CheckLib(lib):
750 print "Error: can't find library %s required by python" % lib
751 Exit(1)
752
753# On Solaris you need to use libsocket for socket ops
754if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'):
755 if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'):
756 print "Can't find library with socket calls (e.g. accept())"
757 Exit(1)
758
759# Check for zlib. If the check passes, libz will be automatically
760# added to the LIBS environment variable.
761if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
762 print 'Error: did not find needed zlib compression library '\
763 'and/or zlib.h header file.'
764 print ' Please install zlib and try again.'
765 Exit(1)
766
767# If we have the protobuf compiler, also make sure we have the
768# development libraries. If the check passes, libprotobuf will be
769# automatically added to the LIBS environment variable. After
770# this, we can use the HAVE_PROTOBUF flag to determine if we have
771# got both protoc and libprotobuf available.
772main['HAVE_PROTOBUF'] = main['PROTOC'] and \
773 conf.CheckLibWithHeader('protobuf', 'google/protobuf/message.h',
774 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;')
775
776# If we have the compiler but not the library, print another warning.
777if main['PROTOC'] and not main['HAVE_PROTOBUF']:
778 print termcap.Yellow + termcap.Bold + \
779 'Warning: did not find protocol buffer library and/or headers.\n' + \
780 ' Please install libprotobuf-dev for tracing support.' + \
781 termcap.Normal
782
783# Check for librt.
784have_posix_clock = \
785 conf.CheckLibWithHeader(None, 'time.h', 'C',
786 'clock_nanosleep(0,0,NULL,NULL);') or \
787 conf.CheckLibWithHeader('rt', 'time.h', 'C',
788 'clock_nanosleep(0,0,NULL,NULL);')
789
790have_posix_timers = \
791 conf.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C',
792 'timer_create(CLOCK_MONOTONIC, NULL, NULL);')
793
794if not GetOption('without_tcmalloc'):
795 if conf.CheckLib('tcmalloc'):
796 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS'])
797 elif conf.CheckLib('tcmalloc_minimal'):
798 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS'])
799 else:
800 print termcap.Yellow + termcap.Bold + \
801 "You can get a 12% performance improvement by "\
802 "installing tcmalloc (libgoogle-perftools-dev package "\
803 "on Ubuntu or RedHat)." + termcap.Normal
804
805
806# Detect back trace implementations. The last implementation in the
807# list will be used by default.
808backtrace_impls = [ "none" ]
809
810if conf.CheckLibWithHeader(None, 'execinfo.h', 'C',
811 'backtrace_symbols_fd((void*)0, 0, 0);'):
812 backtrace_impls.append("glibc")
813elif conf.CheckLibWithHeader('execinfo', 'execinfo.h', 'C',
814 'backtrace_symbols_fd((void*)0, 0, 0);'):
815 # NetBSD and FreeBSD need libexecinfo.
816 backtrace_impls.append("glibc")
817 main.Append(LIBS=['execinfo'])
818
819if backtrace_impls[-1] == "none":
820 default_backtrace_impl = "none"
821 print termcap.Yellow + termcap.Bold + \
822 "No suitable back trace implementation found." + \
823 termcap.Normal
824
825if not have_posix_clock:
826 print "Can't find library for POSIX clocks."
827
828# Check for <fenv.h> (C99 FP environment control)
829have_fenv = conf.CheckHeader('fenv.h', '<>')
830if not have_fenv:
831 print "Warning: Header file <fenv.h> not found."
832 print " This host has no IEEE FP rounding mode control."
833
834# Check for <png.h> (libpng library needed if wanting to dump
835# frame buffer image in png format)
836have_png = conf.CheckHeader('png.h', '<>')
837if not have_png:
838 print "Warning: Header file <png.h> not found."
839 print " This host has no libpng library."
840 print " Disabling support for PNG framebuffers."
841
842# Check if we should enable KVM-based hardware virtualization. The API
843# we rely on exists since version 2.6.36 of the kernel, but somehow
844# the KVM_API_VERSION does not reflect the change. We test for one of
845# the types as a fall back.
846have_kvm = conf.CheckHeader('linux/kvm.h', '<>')
847if not have_kvm:
848 print "Info: Compatible header file <linux/kvm.h> not found, " \
849 "disabling KVM support."
850
851# Check if the TUN/TAP driver is available.
852have_tuntap = conf.CheckHeader('linux/if_tun.h', '<>')
853if not have_tuntap:
854 print "Info: Compatible header file <linux/if_tun.h> not found."
855
856# x86 needs support for xsave. We test for the structure here since we
857# won't be able to run new tests by the time we know which ISA we're
858# targeting.
859have_kvm_xsave = conf.CheckTypeSize('struct kvm_xsave',
860 '#include <linux/kvm.h>') != 0
861
862# Check if the requested target ISA is compatible with the host
863def is_isa_kvm_compatible(isa):
864 try:
865 import platform
866 host_isa = platform.machine()
867 except:
868 print "Warning: Failed to determine host ISA."
869 return False
870
871 if not have_posix_timers:
872 print "Warning: Can not enable KVM, host seems to lack support " \
873 "for POSIX timers"
874 return False
875
876 if isa == "arm":
877 return host_isa in ( "armv7l", "aarch64" )
878 elif isa == "x86":
879 if host_isa != "x86_64":
880 return False
881
882 if not have_kvm_xsave:
883 print "KVM on x86 requires xsave support in kernel headers."
884 return False
885
886 return True
887 else:
888 return False
889
890
891# Check if the exclude_host attribute is available. We want this to
892# get accurate instruction counts in KVM.
893main['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf.CheckMember(
894 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host')
895
896
897######################################################################
898#
899# Finish the configuration
900#
901main = conf.Finish()
902
903######################################################################
904#
905# Collect all non-global variables
906#
907
908# Define the universe of supported ISAs
909all_isa_list = [ ]
910all_gpu_isa_list = [ ]
911Export('all_isa_list')
912Export('all_gpu_isa_list')
913
914class CpuModel(object):
915 '''The CpuModel class encapsulates everything the ISA parser needs to
916 know about a particular CPU model.'''
917
918 # Dict of available CPU model objects. Accessible as CpuModel.dict.
919 dict = {}
920
921 # Constructor. Automatically adds models to CpuModel.dict.
922 def __init__(self, name, default=False):
923 self.name = name # name of model
924
925 # This cpu is enabled by default
926 self.default = default
927
928 # Add self to dict
929 if name in CpuModel.dict:
930 raise AttributeError, "CpuModel '%s' already registered" % name
931 CpuModel.dict[name] = self
932
933Export('CpuModel')
934
935# Sticky variables get saved in the variables file so they persist from
936# one invocation to the next (unless overridden, in which case the new
937# value becomes sticky).
938sticky_vars = Variables(args=ARGUMENTS)
939Export('sticky_vars')
940
941# Sticky variables that should be exported
942export_vars = []
943Export('export_vars')
944
945# For Ruby
946all_protocols = []
947Export('all_protocols')
948protocol_dirs = []
949Export('protocol_dirs')
950slicc_includes = []
951Export('slicc_includes')
952
953# Walk the tree and execute all SConsopts scripts that wil add to the
954# above variables
955if GetOption('verbose'):
956 print "Reading SConsopts"
957for bdir in [ base_dir ] + extras_dir_list:
958 if not isdir(bdir):
959 print "Error: directory '%s' does not exist" % bdir
960 Exit(1)
961 for root, dirs, files in os.walk(bdir):
962 if 'SConsopts' in files:
963 if GetOption('verbose'):
964 print "Reading", joinpath(root, 'SConsopts')
965 SConscript(joinpath(root, 'SConsopts'))
966
967all_isa_list.sort()
968all_gpu_isa_list.sort()
969
970sticky_vars.AddVariables(
971 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list),
972 EnumVariable('TARGET_GPU_ISA', 'Target GPU ISA', 'hsail', all_gpu_isa_list),
973 ListVariable('CPU_MODELS', 'CPU models',
974 sorted(n for n,m in CpuModel.dict.iteritems() if m.default),
975 sorted(CpuModel.dict.keys())),
976 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger',
977 False),
978 BoolVariable('SS_COMPATIBLE_FP',
979 'Make floating-point results compatible with SimpleScalar',
980 False),
981 BoolVariable('USE_SSE2',
982 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
983 False),
984 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock),
985 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv),
986 BoolVariable('USE_PNG', 'Enable support for PNG images', have_png),
987 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability',
988 False),
989 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models',
990 have_kvm),
991 BoolVariable('USE_TUNTAP',
992 'Enable using a tap device to bridge to the host network',
993 have_tuntap),
994 BoolVariable('BUILD_GPU', 'Build the compute-GPU model', False),
995 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None',
996 all_protocols),
997 EnumVariable('BACKTRACE_IMPL', 'Post-mortem dump implementation',
998 backtrace_impls[-1], backtrace_impls)
999 )
1000
1001# These variables get exported to #defines in config/*.hh (see src/SConscript).
1002export_vars += ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'TARGET_GPU_ISA',
1003 'CP_ANNOTATE', 'USE_POSIX_CLOCK', 'USE_KVM', 'USE_TUNTAP',
1004 'PROTOCOL', 'HAVE_PROTOBUF', 'HAVE_PERF_ATTR_EXCLUDE_HOST',
1005 'USE_PNG']
1006
1007###################################################
1008#
1009# Define a SCons builder for configuration flag headers.
1010#
1011###################################################
1012
1013# This function generates a config header file that #defines the
1014# variable symbol to the current variable setting (0 or 1). The source
1015# operands are the name of the variable and a Value node containing the
1016# value of the variable.
1017def build_config_file(target, source, env):
1018 (variable, value) = [s.get_contents() for s in source]
1019 f = file(str(target[0]), 'w')
1020 print >> f, '#define', variable, value
1021 f.close()
1022 return None
1023
1024# Combine the two functions into a scons Action object.
1025config_action = MakeAction(build_config_file, Transform("CONFIG H", 2))
1026
1027# The emitter munges the source & target node lists to reflect what
1028# we're really doing.
1029def config_emitter(target, source, env):
1030 # extract variable name from Builder arg
1031 variable = str(target[0])
1032 # True target is config header file
1033 target = joinpath('config', variable.lower() + '.hh')
1034 val = env[variable]
1035 if isinstance(val, bool):
1036 # Force value to 0/1
1037 val = int(val)
1038 elif isinstance(val, str):
1039 val = '"' + val + '"'
1040
1041 # Sources are variable name & value (packaged in SCons Value nodes)
1042 return ([target], [Value(variable), Value(val)])
1043
1044config_builder = Builder(emitter = config_emitter, action = config_action)
1045
1046main.Append(BUILDERS = { 'ConfigFile' : config_builder })
1047
1048###################################################
1049#
1050# Builders for static and shared partially linked object files.
1051#
1052###################################################
1053
1054partial_static_builder = Builder(action=SCons.Defaults.LinkAction,
1055 src_suffix='$OBJSUFFIX',
1056 src_builder=['StaticObject', 'Object'],
1057 LINKFLAGS='$PLINKFLAGS',
1058 LIBS='')
1059
1060def partial_shared_emitter(target, source, env):
1061 for tgt in target:
1062 tgt.attributes.shared = 1
1063 return (target, source)
1064partial_shared_builder = Builder(action=SCons.Defaults.ShLinkAction,
1065 emitter=partial_shared_emitter,
1066 src_suffix='$SHOBJSUFFIX',
1067 src_builder='SharedObject',
1068 SHLINKFLAGS='$PSHLINKFLAGS',
1069 LIBS='')
1070
1071main.Append(BUILDERS = { 'PartialShared' : partial_shared_builder,
1072 'PartialStatic' : partial_static_builder })
1073
1074# builds in ext are shared across all configs in the build root.
1075ext_dir = abspath(joinpath(str(main.root), 'ext'))
1076ext_build_dirs = []
1077for root, dirs, files in os.walk(ext_dir):
1078 if 'SConscript' in files:
1079 build_dir = os.path.relpath(root, ext_dir)
1080 ext_build_dirs.append(build_dir)
1081 main.SConscript(joinpath(root, 'SConscript'),
1082 variant_dir=joinpath(build_root, build_dir))
1083
1084main.Prepend(CPPPATH=Dir('ext/pybind11/include/'))
1085
1086###################################################
1087#
1088# This builder and wrapper method are used to set up a directory with
1089# switching headers. Those are headers which are in a generic location and
1090# that include more specific headers from a directory chosen at build time
1091# based on the current build settings.
1092#
1093###################################################
1094
1095def build_switching_header(target, source, env):
1096 path = str(target[0])
1097 subdir = str(source[0])
1098 dp, fp = os.path.split(path)
1099 dp = os.path.relpath(os.path.realpath(dp),
1100 os.path.realpath(env['BUILDDIR']))
1101 with open(path, 'w') as hdr:
1102 print >>hdr, '#include "%s/%s/%s"' % (dp, subdir, fp)
1103
1104switching_header_action = MakeAction(build_switching_header,
1105 Transform('GENERATE'))
1106
1107switching_header_builder = Builder(action=switching_header_action,
1108 source_factory=Value,
1109 single_source=True)
1110
1111main.Append(BUILDERS = { 'SwitchingHeader': switching_header_builder })
1112
1113def switching_headers(self, headers, source):
1114 for header in headers:
1115 self.SwitchingHeader(header, source)
1116
1117main.AddMethod(switching_headers, 'SwitchingHeaders')
1118
1119###################################################
1120#
1121# Define build environments for selected configurations.
1122#
1123###################################################
1124
1125for variant_path in variant_paths:
1126 if not GetOption('silent'):
1127 print "Building in", variant_path
1128
1129 # Make a copy of the build-root environment to use for this config.
1130 env = main.Clone()
1131 env['BUILDDIR'] = variant_path
1132
1133 # variant_dir is the tail component of build path, and is used to
1134 # determine the build parameters (e.g., 'ALPHA_SE')
1135 (build_root, variant_dir) = splitpath(variant_path)
1136
1137 # Set env variables according to the build directory config.
1138 sticky_vars.files = []
1139 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in
1140 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke
1141 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings.
1142 current_vars_file = joinpath(build_root, 'variables', variant_dir)
1143 if isfile(current_vars_file):
1144 sticky_vars.files.append(current_vars_file)
1145 if not GetOption('silent'):
1146 print "Using saved variables file %s" % current_vars_file
1147 elif variant_dir in ext_build_dirs:
1148 # Things in ext are built without a variant directory.
1149 continue
1150 else:
1151 # Build dir-specific variables file doesn't exist.
1152
1153 # Make sure the directory is there so we can create it later
1154 opt_dir = dirname(current_vars_file)
1155 if not isdir(opt_dir):
1156 mkdir(opt_dir)
1157
1158 # Get default build variables from source tree. Variables are
1159 # normally determined by name of $VARIANT_DIR, but can be
1160 # overridden by '--default=' arg on command line.
1161 default = GetOption('default')
1162 opts_dir = joinpath(main.root.abspath, 'build_opts')
1163 if default:
1164 default_vars_files = [joinpath(build_root, 'variables', default),
1165 joinpath(opts_dir, default)]
1166 else:
1167 default_vars_files = [joinpath(opts_dir, variant_dir)]
1168 existing_files = filter(isfile, default_vars_files)
1169 if existing_files:
1170 default_vars_file = existing_files[0]
1171 sticky_vars.files.append(default_vars_file)
1172 print "Variables file %s not found,\n using defaults in %s" \
1173 % (current_vars_file, default_vars_file)
1174 else:
1175 print "Error: cannot find variables file %s or " \
1176 "default file(s) %s" \
1177 % (current_vars_file, ' or '.join(default_vars_files))
1178 Exit(1)
1179
1180 # Apply current variable settings to env
1181 sticky_vars.Update(env)
1182
1183 help_texts["local_vars"] += \
1184 "Build variables for %s:\n" % variant_dir \
1185 + sticky_vars.GenerateHelpText(env)
1186
1187 # Process variable settings.
1188
1189 if not have_fenv and env['USE_FENV']:
1190 print "Warning: <fenv.h> not available; " \
1191 "forcing USE_FENV to False in", variant_dir + "."
1192 env['USE_FENV'] = False
1193
1194 if not env['USE_FENV']:
1195 print "Warning: No IEEE FP rounding mode control in", variant_dir + "."
1196 print " FP results may deviate slightly from other platforms."
1197
1198 if not have_png and env['USE_PNG']:
1199 print "Warning: <png.h> not available; " \
1200 "forcing USE_PNG to False in", variant_dir + "."
1201 env['USE_PNG'] = False
1202
1203 if env['USE_PNG']:
1204 env.Append(LIBS=['png'])
1205
1206 if env['EFENCE']:
1207 env.Append(LIBS=['efence'])
1208
1209 if env['USE_KVM']:
1210 if not have_kvm:
1211 print "Warning: Can not enable KVM, host seems to lack KVM support"
1212 env['USE_KVM'] = False
1213 elif not is_isa_kvm_compatible(env['TARGET_ISA']):
1214 print "Info: KVM support disabled due to unsupported host and " \
1215 "target ISA combination"
1216 env['USE_KVM'] = False
1217
1218 if env['USE_TUNTAP']:
1219 if not have_tuntap:
1220 print "Warning: Can't connect EtherTap with a tap device."
1221 env['USE_TUNTAP'] = False
1222
1223 if env['BUILD_GPU']:
1224 env.Append(CPPDEFINES=['BUILD_GPU'])
1225
1226 # Warn about missing optional functionality
1227 if env['USE_KVM']:
1228 if not main['HAVE_PERF_ATTR_EXCLUDE_HOST']:
1229 print "Warning: perf_event headers lack support for the " \
1230 "exclude_host attribute. KVM instruction counts will " \
1231 "be inaccurate."
1232
1233 # Save sticky variable settings back to current variables file
1234 sticky_vars.Save(current_vars_file, env)
1235
1236 if env['USE_SSE2']:
1237 env.Append(CCFLAGS=['-msse2'])
1238
1239 # The src/SConscript file sets up the build rules in 'env' according
1240 # to the configured variables. It returns a list of environments,
1241 # one for each variant build (debug, opt, etc.)
1242 SConscript('src/SConscript', variant_dir = variant_path, exports = 'env')
1243
1244# base help text
1245Help('''
1246Usage: scons [scons options] [build variables] [target(s)]
1247
1248Extra scons options:
1249%(options)s
1250
1251Global build variables:
1252%(global_vars)s
1253
1254%(local_vars)s
1255''' % help_texts)
| 369else:
370 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal,
371 print "Don't know what compiler options to use for your compiler."
372 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX']
373 print termcap.Yellow + ' version:' + termcap.Normal,
374 if not CXX_version:
375 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\
376 termcap.Normal
377 else:
378 print CXX_version.replace('\n', '<nl>')
379 print " If you're trying to use a compiler other than GCC"
380 print " or clang, there appears to be something wrong with your"
381 print " environment."
382 print " "
383 print " If you are trying to use a compiler other than those listed"
384 print " above you will need to ease fix SConstruct and "
385 print " src/SConscript to support that compiler."
386 Exit(1)
387
388if main['GCC']:
389 # Check for a supported version of gcc. >= 4.8 is chosen for its
390 # level of c++11 support. See
391 # http://gcc.gnu.org/projects/cxx0x.html for details.
392 gcc_version = readCommand([main['CXX'], '-dumpversion'], exception=False)
393 if compareVersions(gcc_version, "4.8") < 0:
394 print 'Error: gcc version 4.8 or newer required.'
395 print ' Installed version:', gcc_version
396 Exit(1)
397
398 main['GCC_VERSION'] = gcc_version
399
400 if compareVersions(gcc_version, '4.9') >= 0:
401 # Incremental linking with LTO is currently broken in gcc versions
402 # 4.9 and above. A version where everything works completely hasn't
403 # yet been identified.
404 #
405 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67548
406 main['BROKEN_INCREMENTAL_LTO'] = True
407 if compareVersions(gcc_version, '6.0') >= 0:
408 # gcc versions 6.0 and greater accept an -flinker-output flag which
409 # selects what type of output the linker should generate. This is
410 # necessary for incremental lto to work, but is also broken in
411 # current versions of gcc. It may not be necessary in future
412 # versions. We add it here since it might be, and as a reminder that
413 # it exists. It's excluded if lto is being forced.
414 #
415 # https://gcc.gnu.org/gcc-6/changes.html
416 # https://gcc.gnu.org/ml/gcc-patches/2015-11/msg03161.html
417 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69866
418 if not GetOption('force_lto'):
419 main.Append(PSHLINKFLAGS='-flinker-output=rel')
420 main.Append(PLINKFLAGS='-flinker-output=rel')
421
422 # gcc from version 4.8 and above generates "rep; ret" instructions
423 # to avoid performance penalties on certain AMD chips. Older
424 # assemblers detect this as an error, "Error: expecting string
425 # instruction after `rep'"
426 as_version_raw = readCommand([main['AS'], '-v', '/dev/null',
427 '-o', '/dev/null'],
428 exception=False).split()
429
430 # version strings may contain extra distro-specific
431 # qualifiers, so play it safe and keep only what comes before
432 # the first hyphen
433 as_version = as_version_raw[-1].split('-')[0] if as_version_raw else None
434
435 if not as_version or compareVersions(as_version, "2.23") < 0:
436 print termcap.Yellow + termcap.Bold + \
437 'Warning: This combination of gcc and binutils have' + \
438 ' known incompatibilities.\n' + \
439 ' If you encounter build problems, please update ' + \
440 'binutils to 2.23.' + \
441 termcap.Normal
442
443 # Make sure we warn if the user has requested to compile with the
444 # Undefined Benahvior Sanitizer and this version of gcc does not
445 # support it.
446 if GetOption('with_ubsan') and \
447 compareVersions(gcc_version, '4.9') < 0:
448 print termcap.Yellow + termcap.Bold + \
449 'Warning: UBSan is only supported using gcc 4.9 and later.' + \
450 termcap.Normal
451
452 disable_lto = GetOption('no_lto')
453 if not disable_lto and main.get('BROKEN_INCREMENTAL_LTO', False) and \
454 not GetOption('force_lto'):
455 print termcap.Yellow + termcap.Bold + \
456 'Warning: Your compiler doesn\'t support incremental linking' + \
457 ' and lto at the same time, so lto is being disabled. To force' + \
458 ' lto on anyway, use the --force-lto option. That will disable' + \
459 ' partial linking.' + \
460 termcap.Normal
461 disable_lto = True
462
463 # Add the appropriate Link-Time Optimization (LTO) flags
464 # unless LTO is explicitly turned off. Note that these flags
465 # are only used by the fast target.
466 if not disable_lto:
467 # Pass the LTO flag when compiling to produce GIMPLE
468 # output, we merely create the flags here and only append
469 # them later
470 main['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')]
471
472 # Use the same amount of jobs for LTO as we are running
473 # scons with
474 main['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')]
475
476 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin-malloc', '-fno-builtin-calloc',
477 '-fno-builtin-realloc', '-fno-builtin-free'])
478
479 # add option to check for undeclared overrides
480 if compareVersions(gcc_version, "5.0") > 0:
481 main.Append(CCFLAGS=['-Wno-error=suggest-override'])
482
483 # The address sanitizer is available for gcc >= 4.8
484 if GetOption('with_asan'):
485 if GetOption('with_ubsan') and \
486 compareVersions(env['GCC_VERSION'], '4.9') >= 0:
487 env.Append(CCFLAGS=['-fsanitize=address,undefined',
488 '-fno-omit-frame-pointer'],
489 LINKFLAGS='-fsanitize=address,undefined')
490 else:
491 env.Append(CCFLAGS=['-fsanitize=address',
492 '-fno-omit-frame-pointer'],
493 LINKFLAGS='-fsanitize=address')
494 # Only gcc >= 4.9 supports UBSan, so check both the version
495 # and the command-line option before adding the compiler and
496 # linker flags.
497 elif GetOption('with_ubsan') and \
498 compareVersions(env['GCC_VERSION'], '4.9') >= 0:
499 env.Append(CCFLAGS='-fsanitize=undefined')
500 env.Append(LINKFLAGS='-fsanitize=undefined')
501
502elif main['CLANG']:
503 # Check for a supported version of clang, >= 3.1 is needed to
504 # support similar features as gcc 4.8. See
505 # http://clang.llvm.org/cxx_status.html for details
506 clang_version_re = re.compile(".* version (\d+\.\d+)")
507 clang_version_match = clang_version_re.search(CXX_version)
508 if (clang_version_match):
509 clang_version = clang_version_match.groups()[0]
510 if compareVersions(clang_version, "3.1") < 0:
511 print 'Error: clang version 3.1 or newer required.'
512 print ' Installed version:', clang_version
513 Exit(1)
514 else:
515 print 'Error: Unable to determine clang version.'
516 Exit(1)
517
518 # clang has a few additional warnings that we disable, extraneous
519 # parantheses are allowed due to Ruby's printing of the AST,
520 # finally self assignments are allowed as the generated CPU code
521 # is relying on this
522 main.Append(CCFLAGS=['-Wno-parentheses',
523 '-Wno-self-assign',
524 # Some versions of libstdc++ (4.8?) seem to
525 # use struct hash and class hash
526 # interchangeably.
527 '-Wno-mismatched-tags',
528 ])
529
530 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin'])
531
532 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as
533 # opposed to libstdc++, as the later is dated.
534 if sys.platform == "darwin":
535 main.Append(CXXFLAGS=['-stdlib=libc++'])
536 main.Append(LIBS=['c++'])
537
538 # On FreeBSD we need libthr.
539 if sys.platform.startswith('freebsd'):
540 main.Append(LIBS=['thr'])
541
542 # We require clang >= 3.1, so there is no need to check any
543 # versions here.
544 if GetOption('with_ubsan'):
545 if GetOption('with_asan'):
546 env.Append(CCFLAGS=['-fsanitize=address,undefined',
547 '-fno-omit-frame-pointer'],
548 LINKFLAGS='-fsanitize=address,undefined')
549 else:
550 env.Append(CCFLAGS='-fsanitize=undefined',
551 LINKFLAGS='-fsanitize=undefined')
552
553 elif GetOption('with_asan'):
554 env.Append(CCFLAGS=['-fsanitize=address',
555 '-fno-omit-frame-pointer'],
556 LINKFLAGS='-fsanitize=address')
557
558else:
559 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal,
560 print "Don't know what compiler options to use for your compiler."
561 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX']
562 print termcap.Yellow + ' version:' + termcap.Normal,
563 if not CXX_version:
564 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\
565 termcap.Normal
566 else:
567 print CXX_version.replace('\n', '<nl>')
568 print " If you're trying to use a compiler other than GCC"
569 print " or clang, there appears to be something wrong with your"
570 print " environment."
571 print " "
572 print " If you are trying to use a compiler other than those listed"
573 print " above you will need to ease fix SConstruct and "
574 print " src/SConscript to support that compiler."
575 Exit(1)
576
577# Set up common yacc/bison flags (needed for Ruby)
578main['YACCFLAGS'] = '-d'
579main['YACCHXXFILESUFFIX'] = '.hh'
580
581# Do this after we save setting back, or else we'll tack on an
582# extra 'qdo' every time we run scons.
583if main['BATCH']:
584 main['CC'] = main['BATCH_CMD'] + ' ' + main['CC']
585 main['CXX'] = main['BATCH_CMD'] + ' ' + main['CXX']
586 main['AS'] = main['BATCH_CMD'] + ' ' + main['AS']
587 main['AR'] = main['BATCH_CMD'] + ' ' + main['AR']
588 main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB']
589
590if sys.platform == 'cygwin':
591 # cygwin has some header file issues...
592 main.Append(CCFLAGS=["-Wno-uninitialized"])
593
594# Check for the protobuf compiler
595protoc_version = readCommand([main['PROTOC'], '--version'],
596 exception='').split()
597
598# First two words should be "libprotoc x.y.z"
599if len(protoc_version) < 2 or protoc_version[0] != 'libprotoc':
600 print termcap.Yellow + termcap.Bold + \
601 'Warning: Protocol buffer compiler (protoc) not found.\n' + \
602 ' Please install protobuf-compiler for tracing support.' + \
603 termcap.Normal
604 main['PROTOC'] = False
605else:
606 # Based on the availability of the compress stream wrappers,
607 # require 2.1.0
608 min_protoc_version = '2.1.0'
609 if compareVersions(protoc_version[1], min_protoc_version) < 0:
610 print termcap.Yellow + termcap.Bold + \
611 'Warning: protoc version', min_protoc_version, \
612 'or newer required.\n' + \
613 ' Installed version:', protoc_version[1], \
614 termcap.Normal
615 main['PROTOC'] = False
616 else:
617 # Attempt to determine the appropriate include path and
618 # library path using pkg-config, that means we also need to
619 # check for pkg-config. Note that it is possible to use
620 # protobuf without the involvement of pkg-config. Later on we
621 # check go a library config check and at that point the test
622 # will fail if libprotobuf cannot be found.
623 if readCommand(['pkg-config', '--version'], exception=''):
624 try:
625 # Attempt to establish what linking flags to add for protobuf
626 # using pkg-config
627 main.ParseConfig('pkg-config --cflags --libs-only-L protobuf')
628 except:
629 print termcap.Yellow + termcap.Bold + \
630 'Warning: pkg-config could not get protobuf flags.' + \
631 termcap.Normal
632
633
634# Check for 'timeout' from GNU coreutils. If present, regressions will
635# be run with a time limit. We require version 8.13 since we rely on
636# support for the '--foreground' option.
637if sys.platform.startswith('freebsd'):
638 timeout_lines = readCommand(['gtimeout', '--version'],
639 exception='').splitlines()
640else:
641 timeout_lines = readCommand(['timeout', '--version'],
642 exception='').splitlines()
643# Get the first line and tokenize it
644timeout_version = timeout_lines[0].split() if timeout_lines else []
645main['TIMEOUT'] = timeout_version and \
646 compareVersions(timeout_version[-1], '8.13') >= 0
647
648# Add a custom Check function to test for structure members.
649def CheckMember(context, include, decl, member, include_quotes="<>"):
650 context.Message("Checking for member %s in %s..." %
651 (member, decl))
652 text = """
653#include %(header)s
654int main(){
655 %(decl)s test;
656 (void)test.%(member)s;
657 return 0;
658};
659""" % { "header" : include_quotes[0] + include + include_quotes[1],
660 "decl" : decl,
661 "member" : member,
662 }
663
664 ret = context.TryCompile(text, extension=".cc")
665 context.Result(ret)
666 return ret
667
668# Platform-specific configuration. Note again that we assume that all
669# builds under a given build root run on the same host platform.
670conf = Configure(main,
671 conf_dir = joinpath(build_root, '.scons_config'),
672 log_file = joinpath(build_root, 'scons_config.log'),
673 custom_tests = {
674 'CheckMember' : CheckMember,
675 })
676
677# Check if we should compile a 64 bit binary on Mac OS X/Darwin
678try:
679 import platform
680 uname = platform.uname()
681 if uname[0] == 'Darwin' and compareVersions(uname[2], '9.0.0') >= 0:
682 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]):
683 main.Append(CCFLAGS=['-arch', 'x86_64'])
684 main.Append(CFLAGS=['-arch', 'x86_64'])
685 main.Append(LINKFLAGS=['-arch', 'x86_64'])
686 main.Append(ASFLAGS=['-arch', 'x86_64'])
687except:
688 pass
689
690# Recent versions of scons substitute a "Null" object for Configure()
691# when configuration isn't necessary, e.g., if the "--help" option is
692# present. Unfortuantely this Null object always returns false,
693# breaking all our configuration checks. We replace it with our own
694# more optimistic null object that returns True instead.
695if not conf:
696 def NullCheck(*args, **kwargs):
697 return True
698
699 class NullConf:
700 def __init__(self, env):
701 self.env = env
702 def Finish(self):
703 return self.env
704 def __getattr__(self, mname):
705 return NullCheck
706
707 conf = NullConf(main)
708
709# Cache build files in the supplied directory.
710if main['M5_BUILD_CACHE']:
711 print 'Using build cache located at', main['M5_BUILD_CACHE']
712 CacheDir(main['M5_BUILD_CACHE'])
713
714main['USE_PYTHON'] = not GetOption('without_python')
715if main['USE_PYTHON']:
716 # Find Python include and library directories for embedding the
717 # interpreter. We rely on python-config to resolve the appropriate
718 # includes and linker flags. ParseConfig does not seem to understand
719 # the more exotic linker flags such as -Xlinker and -export-dynamic so
720 # we add them explicitly below. If you want to link in an alternate
721 # version of python, see above for instructions on how to invoke
722 # scons with the appropriate PATH set.
723 #
724 # First we check if python2-config exists, else we use python-config
725 python_config = readCommand(['which', 'python2-config'],
726 exception='').strip()
727 if not os.path.exists(python_config):
728 python_config = readCommand(['which', 'python-config'],
729 exception='').strip()
730 py_includes = readCommand([python_config, '--includes'],
731 exception='').split()
732 # Strip the -I from the include folders before adding them to the
733 # CPPPATH
734 main.Append(CPPPATH=map(lambda inc: inc[2:], py_includes))
735
736 # Read the linker flags and split them into libraries and other link
737 # flags. The libraries are added later through the call the CheckLib.
738 py_ld_flags = readCommand([python_config, '--ldflags'],
739 exception='').split()
740 py_libs = []
741 for lib in py_ld_flags:
742 if not lib.startswith('-l'):
743 main.Append(LINKFLAGS=[lib])
744 else:
745 lib = lib[2:]
746 if lib not in py_libs:
747 py_libs.append(lib)
748
749 # verify that this stuff works
750 if not conf.CheckHeader('Python.h', '<>'):
751 print "Error: can't find Python.h header in", py_includes
752 print "Install Python headers (package python-dev on Ubuntu and RedHat)"
753 Exit(1)
754
755 for lib in py_libs:
756 if not conf.CheckLib(lib):
757 print "Error: can't find library %s required by python" % lib
758 Exit(1)
759
760# On Solaris you need to use libsocket for socket ops
761if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'):
762 if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'):
763 print "Can't find library with socket calls (e.g. accept())"
764 Exit(1)
765
766# Check for zlib. If the check passes, libz will be automatically
767# added to the LIBS environment variable.
768if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
769 print 'Error: did not find needed zlib compression library '\
770 'and/or zlib.h header file.'
771 print ' Please install zlib and try again.'
772 Exit(1)
773
774# If we have the protobuf compiler, also make sure we have the
775# development libraries. If the check passes, libprotobuf will be
776# automatically added to the LIBS environment variable. After
777# this, we can use the HAVE_PROTOBUF flag to determine if we have
778# got both protoc and libprotobuf available.
779main['HAVE_PROTOBUF'] = main['PROTOC'] and \
780 conf.CheckLibWithHeader('protobuf', 'google/protobuf/message.h',
781 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;')
782
783# If we have the compiler but not the library, print another warning.
784if main['PROTOC'] and not main['HAVE_PROTOBUF']:
785 print termcap.Yellow + termcap.Bold + \
786 'Warning: did not find protocol buffer library and/or headers.\n' + \
787 ' Please install libprotobuf-dev for tracing support.' + \
788 termcap.Normal
789
790# Check for librt.
791have_posix_clock = \
792 conf.CheckLibWithHeader(None, 'time.h', 'C',
793 'clock_nanosleep(0,0,NULL,NULL);') or \
794 conf.CheckLibWithHeader('rt', 'time.h', 'C',
795 'clock_nanosleep(0,0,NULL,NULL);')
796
797have_posix_timers = \
798 conf.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C',
799 'timer_create(CLOCK_MONOTONIC, NULL, NULL);')
800
801if not GetOption('without_tcmalloc'):
802 if conf.CheckLib('tcmalloc'):
803 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS'])
804 elif conf.CheckLib('tcmalloc_minimal'):
805 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS'])
806 else:
807 print termcap.Yellow + termcap.Bold + \
808 "You can get a 12% performance improvement by "\
809 "installing tcmalloc (libgoogle-perftools-dev package "\
810 "on Ubuntu or RedHat)." + termcap.Normal
811
812
813# Detect back trace implementations. The last implementation in the
814# list will be used by default.
815backtrace_impls = [ "none" ]
816
817if conf.CheckLibWithHeader(None, 'execinfo.h', 'C',
818 'backtrace_symbols_fd((void*)0, 0, 0);'):
819 backtrace_impls.append("glibc")
820elif conf.CheckLibWithHeader('execinfo', 'execinfo.h', 'C',
821 'backtrace_symbols_fd((void*)0, 0, 0);'):
822 # NetBSD and FreeBSD need libexecinfo.
823 backtrace_impls.append("glibc")
824 main.Append(LIBS=['execinfo'])
825
826if backtrace_impls[-1] == "none":
827 default_backtrace_impl = "none"
828 print termcap.Yellow + termcap.Bold + \
829 "No suitable back trace implementation found." + \
830 termcap.Normal
831
832if not have_posix_clock:
833 print "Can't find library for POSIX clocks."
834
835# Check for <fenv.h> (C99 FP environment control)
836have_fenv = conf.CheckHeader('fenv.h', '<>')
837if not have_fenv:
838 print "Warning: Header file <fenv.h> not found."
839 print " This host has no IEEE FP rounding mode control."
840
841# Check for <png.h> (libpng library needed if wanting to dump
842# frame buffer image in png format)
843have_png = conf.CheckHeader('png.h', '<>')
844if not have_png:
845 print "Warning: Header file <png.h> not found."
846 print " This host has no libpng library."
847 print " Disabling support for PNG framebuffers."
848
849# Check if we should enable KVM-based hardware virtualization. The API
850# we rely on exists since version 2.6.36 of the kernel, but somehow
851# the KVM_API_VERSION does not reflect the change. We test for one of
852# the types as a fall back.
853have_kvm = conf.CheckHeader('linux/kvm.h', '<>')
854if not have_kvm:
855 print "Info: Compatible header file <linux/kvm.h> not found, " \
856 "disabling KVM support."
857
858# Check if the TUN/TAP driver is available.
859have_tuntap = conf.CheckHeader('linux/if_tun.h', '<>')
860if not have_tuntap:
861 print "Info: Compatible header file <linux/if_tun.h> not found."
862
863# x86 needs support for xsave. We test for the structure here since we
864# won't be able to run new tests by the time we know which ISA we're
865# targeting.
866have_kvm_xsave = conf.CheckTypeSize('struct kvm_xsave',
867 '#include <linux/kvm.h>') != 0
868
869# Check if the requested target ISA is compatible with the host
870def is_isa_kvm_compatible(isa):
871 try:
872 import platform
873 host_isa = platform.machine()
874 except:
875 print "Warning: Failed to determine host ISA."
876 return False
877
878 if not have_posix_timers:
879 print "Warning: Can not enable KVM, host seems to lack support " \
880 "for POSIX timers"
881 return False
882
883 if isa == "arm":
884 return host_isa in ( "armv7l", "aarch64" )
885 elif isa == "x86":
886 if host_isa != "x86_64":
887 return False
888
889 if not have_kvm_xsave:
890 print "KVM on x86 requires xsave support in kernel headers."
891 return False
892
893 return True
894 else:
895 return False
896
897
898# Check if the exclude_host attribute is available. We want this to
899# get accurate instruction counts in KVM.
900main['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf.CheckMember(
901 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host')
902
903
904######################################################################
905#
906# Finish the configuration
907#
908main = conf.Finish()
909
910######################################################################
911#
912# Collect all non-global variables
913#
914
915# Define the universe of supported ISAs
916all_isa_list = [ ]
917all_gpu_isa_list = [ ]
918Export('all_isa_list')
919Export('all_gpu_isa_list')
920
921class CpuModel(object):
922 '''The CpuModel class encapsulates everything the ISA parser needs to
923 know about a particular CPU model.'''
924
925 # Dict of available CPU model objects. Accessible as CpuModel.dict.
926 dict = {}
927
928 # Constructor. Automatically adds models to CpuModel.dict.
929 def __init__(self, name, default=False):
930 self.name = name # name of model
931
932 # This cpu is enabled by default
933 self.default = default
934
935 # Add self to dict
936 if name in CpuModel.dict:
937 raise AttributeError, "CpuModel '%s' already registered" % name
938 CpuModel.dict[name] = self
939
940Export('CpuModel')
941
942# Sticky variables get saved in the variables file so they persist from
943# one invocation to the next (unless overridden, in which case the new
944# value becomes sticky).
945sticky_vars = Variables(args=ARGUMENTS)
946Export('sticky_vars')
947
948# Sticky variables that should be exported
949export_vars = []
950Export('export_vars')
951
952# For Ruby
953all_protocols = []
954Export('all_protocols')
955protocol_dirs = []
956Export('protocol_dirs')
957slicc_includes = []
958Export('slicc_includes')
959
960# Walk the tree and execute all SConsopts scripts that wil add to the
961# above variables
962if GetOption('verbose'):
963 print "Reading SConsopts"
964for bdir in [ base_dir ] + extras_dir_list:
965 if not isdir(bdir):
966 print "Error: directory '%s' does not exist" % bdir
967 Exit(1)
968 for root, dirs, files in os.walk(bdir):
969 if 'SConsopts' in files:
970 if GetOption('verbose'):
971 print "Reading", joinpath(root, 'SConsopts')
972 SConscript(joinpath(root, 'SConsopts'))
973
974all_isa_list.sort()
975all_gpu_isa_list.sort()
976
977sticky_vars.AddVariables(
978 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list),
979 EnumVariable('TARGET_GPU_ISA', 'Target GPU ISA', 'hsail', all_gpu_isa_list),
980 ListVariable('CPU_MODELS', 'CPU models',
981 sorted(n for n,m in CpuModel.dict.iteritems() if m.default),
982 sorted(CpuModel.dict.keys())),
983 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger',
984 False),
985 BoolVariable('SS_COMPATIBLE_FP',
986 'Make floating-point results compatible with SimpleScalar',
987 False),
988 BoolVariable('USE_SSE2',
989 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
990 False),
991 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock),
992 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv),
993 BoolVariable('USE_PNG', 'Enable support for PNG images', have_png),
994 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability',
995 False),
996 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models',
997 have_kvm),
998 BoolVariable('USE_TUNTAP',
999 'Enable using a tap device to bridge to the host network',
1000 have_tuntap),
1001 BoolVariable('BUILD_GPU', 'Build the compute-GPU model', False),
1002 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None',
1003 all_protocols),
1004 EnumVariable('BACKTRACE_IMPL', 'Post-mortem dump implementation',
1005 backtrace_impls[-1], backtrace_impls)
1006 )
1007
1008# These variables get exported to #defines in config/*.hh (see src/SConscript).
1009export_vars += ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'TARGET_GPU_ISA',
1010 'CP_ANNOTATE', 'USE_POSIX_CLOCK', 'USE_KVM', 'USE_TUNTAP',
1011 'PROTOCOL', 'HAVE_PROTOBUF', 'HAVE_PERF_ATTR_EXCLUDE_HOST',
1012 'USE_PNG']
1013
1014###################################################
1015#
1016# Define a SCons builder for configuration flag headers.
1017#
1018###################################################
1019
1020# This function generates a config header file that #defines the
1021# variable symbol to the current variable setting (0 or 1). The source
1022# operands are the name of the variable and a Value node containing the
1023# value of the variable.
1024def build_config_file(target, source, env):
1025 (variable, value) = [s.get_contents() for s in source]
1026 f = file(str(target[0]), 'w')
1027 print >> f, '#define', variable, value
1028 f.close()
1029 return None
1030
1031# Combine the two functions into a scons Action object.
1032config_action = MakeAction(build_config_file, Transform("CONFIG H", 2))
1033
1034# The emitter munges the source & target node lists to reflect what
1035# we're really doing.
1036def config_emitter(target, source, env):
1037 # extract variable name from Builder arg
1038 variable = str(target[0])
1039 # True target is config header file
1040 target = joinpath('config', variable.lower() + '.hh')
1041 val = env[variable]
1042 if isinstance(val, bool):
1043 # Force value to 0/1
1044 val = int(val)
1045 elif isinstance(val, str):
1046 val = '"' + val + '"'
1047
1048 # Sources are variable name & value (packaged in SCons Value nodes)
1049 return ([target], [Value(variable), Value(val)])
1050
1051config_builder = Builder(emitter = config_emitter, action = config_action)
1052
1053main.Append(BUILDERS = { 'ConfigFile' : config_builder })
1054
1055###################################################
1056#
1057# Builders for static and shared partially linked object files.
1058#
1059###################################################
1060
1061partial_static_builder = Builder(action=SCons.Defaults.LinkAction,
1062 src_suffix='$OBJSUFFIX',
1063 src_builder=['StaticObject', 'Object'],
1064 LINKFLAGS='$PLINKFLAGS',
1065 LIBS='')
1066
1067def partial_shared_emitter(target, source, env):
1068 for tgt in target:
1069 tgt.attributes.shared = 1
1070 return (target, source)
1071partial_shared_builder = Builder(action=SCons.Defaults.ShLinkAction,
1072 emitter=partial_shared_emitter,
1073 src_suffix='$SHOBJSUFFIX',
1074 src_builder='SharedObject',
1075 SHLINKFLAGS='$PSHLINKFLAGS',
1076 LIBS='')
1077
1078main.Append(BUILDERS = { 'PartialShared' : partial_shared_builder,
1079 'PartialStatic' : partial_static_builder })
1080
1081# builds in ext are shared across all configs in the build root.
1082ext_dir = abspath(joinpath(str(main.root), 'ext'))
1083ext_build_dirs = []
1084for root, dirs, files in os.walk(ext_dir):
1085 if 'SConscript' in files:
1086 build_dir = os.path.relpath(root, ext_dir)
1087 ext_build_dirs.append(build_dir)
1088 main.SConscript(joinpath(root, 'SConscript'),
1089 variant_dir=joinpath(build_root, build_dir))
1090
1091main.Prepend(CPPPATH=Dir('ext/pybind11/include/'))
1092
1093###################################################
1094#
1095# This builder and wrapper method are used to set up a directory with
1096# switching headers. Those are headers which are in a generic location and
1097# that include more specific headers from a directory chosen at build time
1098# based on the current build settings.
1099#
1100###################################################
1101
1102def build_switching_header(target, source, env):
1103 path = str(target[0])
1104 subdir = str(source[0])
1105 dp, fp = os.path.split(path)
1106 dp = os.path.relpath(os.path.realpath(dp),
1107 os.path.realpath(env['BUILDDIR']))
1108 with open(path, 'w') as hdr:
1109 print >>hdr, '#include "%s/%s/%s"' % (dp, subdir, fp)
1110
1111switching_header_action = MakeAction(build_switching_header,
1112 Transform('GENERATE'))
1113
1114switching_header_builder = Builder(action=switching_header_action,
1115 source_factory=Value,
1116 single_source=True)
1117
1118main.Append(BUILDERS = { 'SwitchingHeader': switching_header_builder })
1119
1120def switching_headers(self, headers, source):
1121 for header in headers:
1122 self.SwitchingHeader(header, source)
1123
1124main.AddMethod(switching_headers, 'SwitchingHeaders')
1125
1126###################################################
1127#
1128# Define build environments for selected configurations.
1129#
1130###################################################
1131
1132for variant_path in variant_paths:
1133 if not GetOption('silent'):
1134 print "Building in", variant_path
1135
1136 # Make a copy of the build-root environment to use for this config.
1137 env = main.Clone()
1138 env['BUILDDIR'] = variant_path
1139
1140 # variant_dir is the tail component of build path, and is used to
1141 # determine the build parameters (e.g., 'ALPHA_SE')
1142 (build_root, variant_dir) = splitpath(variant_path)
1143
1144 # Set env variables according to the build directory config.
1145 sticky_vars.files = []
1146 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in
1147 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke
1148 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings.
1149 current_vars_file = joinpath(build_root, 'variables', variant_dir)
1150 if isfile(current_vars_file):
1151 sticky_vars.files.append(current_vars_file)
1152 if not GetOption('silent'):
1153 print "Using saved variables file %s" % current_vars_file
1154 elif variant_dir in ext_build_dirs:
1155 # Things in ext are built without a variant directory.
1156 continue
1157 else:
1158 # Build dir-specific variables file doesn't exist.
1159
1160 # Make sure the directory is there so we can create it later
1161 opt_dir = dirname(current_vars_file)
1162 if not isdir(opt_dir):
1163 mkdir(opt_dir)
1164
1165 # Get default build variables from source tree. Variables are
1166 # normally determined by name of $VARIANT_DIR, but can be
1167 # overridden by '--default=' arg on command line.
1168 default = GetOption('default')
1169 opts_dir = joinpath(main.root.abspath, 'build_opts')
1170 if default:
1171 default_vars_files = [joinpath(build_root, 'variables', default),
1172 joinpath(opts_dir, default)]
1173 else:
1174 default_vars_files = [joinpath(opts_dir, variant_dir)]
1175 existing_files = filter(isfile, default_vars_files)
1176 if existing_files:
1177 default_vars_file = existing_files[0]
1178 sticky_vars.files.append(default_vars_file)
1179 print "Variables file %s not found,\n using defaults in %s" \
1180 % (current_vars_file, default_vars_file)
1181 else:
1182 print "Error: cannot find variables file %s or " \
1183 "default file(s) %s" \
1184 % (current_vars_file, ' or '.join(default_vars_files))
1185 Exit(1)
1186
1187 # Apply current variable settings to env
1188 sticky_vars.Update(env)
1189
1190 help_texts["local_vars"] += \
1191 "Build variables for %s:\n" % variant_dir \
1192 + sticky_vars.GenerateHelpText(env)
1193
1194 # Process variable settings.
1195
1196 if not have_fenv and env['USE_FENV']:
1197 print "Warning: <fenv.h> not available; " \
1198 "forcing USE_FENV to False in", variant_dir + "."
1199 env['USE_FENV'] = False
1200
1201 if not env['USE_FENV']:
1202 print "Warning: No IEEE FP rounding mode control in", variant_dir + "."
1203 print " FP results may deviate slightly from other platforms."
1204
1205 if not have_png and env['USE_PNG']:
1206 print "Warning: <png.h> not available; " \
1207 "forcing USE_PNG to False in", variant_dir + "."
1208 env['USE_PNG'] = False
1209
1210 if env['USE_PNG']:
1211 env.Append(LIBS=['png'])
1212
1213 if env['EFENCE']:
1214 env.Append(LIBS=['efence'])
1215
1216 if env['USE_KVM']:
1217 if not have_kvm:
1218 print "Warning: Can not enable KVM, host seems to lack KVM support"
1219 env['USE_KVM'] = False
1220 elif not is_isa_kvm_compatible(env['TARGET_ISA']):
1221 print "Info: KVM support disabled due to unsupported host and " \
1222 "target ISA combination"
1223 env['USE_KVM'] = False
1224
1225 if env['USE_TUNTAP']:
1226 if not have_tuntap:
1227 print "Warning: Can't connect EtherTap with a tap device."
1228 env['USE_TUNTAP'] = False
1229
1230 if env['BUILD_GPU']:
1231 env.Append(CPPDEFINES=['BUILD_GPU'])
1232
1233 # Warn about missing optional functionality
1234 if env['USE_KVM']:
1235 if not main['HAVE_PERF_ATTR_EXCLUDE_HOST']:
1236 print "Warning: perf_event headers lack support for the " \
1237 "exclude_host attribute. KVM instruction counts will " \
1238 "be inaccurate."
1239
1240 # Save sticky variable settings back to current variables file
1241 sticky_vars.Save(current_vars_file, env)
1242
1243 if env['USE_SSE2']:
1244 env.Append(CCFLAGS=['-msse2'])
1245
1246 # The src/SConscript file sets up the build rules in 'env' according
1247 # to the configured variables. It returns a list of environments,
1248 # one for each variant build (debug, opt, etc.)
1249 SConscript('src/SConscript', variant_dir = variant_path, exports = 'env')
1250
1251# base help text
1252Help('''
1253Usage: scons [scons options] [build variables] [target(s)]
1254
1255Extra scons options:
1256%(options)s
1257
1258Global build variables:
1259%(global_vars)s
1260
1261%(local_vars)s
1262''' % help_texts)
|