Searched hist:2014 (Results 976 - 1000 of 1681) sorted by relevance

<<31323334353637383940>>

/gem5/tests/quick/se/00.hello/ref/alpha/linux/simple-timing/
H A Dsimout10036:80e84beef3bb Fri Jan 24 16:29:00 EST 2014 Ali Saidi <Ali.Saidi@ARM.com> stats: update stats for cache occupancy and clock domain changes
/gem5/tests/quick/se/00.hello/ref/mips/linux/simple-atomic/
H A Dsimout10036:80e84beef3bb Fri Jan 24 16:29:00 EST 2014 Ali Saidi <Ali.Saidi@ARM.com> stats: update stats for cache occupancy and clock domain changes
/gem5/tests/quick/se/00.hello/ref/mips/linux/simple-timing/
H A Dsimout10036:80e84beef3bb Fri Jan 24 16:29:00 EST 2014 Ali Saidi <Ali.Saidi@ARM.com> stats: update stats for cache occupancy and clock domain changes
/gem5/src/base/
H A Dinifile.hh10385:3f943443ae30 Sat Sep 20 17:17:00 EDT 2014 Andrew Bardsley <Andrew.Bardsley@arm.com> base: Add getSectionNames to IniFile

Add an accessor to IniFile to list all the sections in the file.
H A Dstr.cc10386:c81407818741 Sat Sep 20 17:17:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> base: Clean up redundant string functions and use C++11

This patch does a bit of housekeeping on the string helper functions
and relies on the C++11 standard library where possible. It also does
away with our custom string hash as an implementation is already part
of the standard library.
/gem5/src/mem/ruby/network/simple/
H A DSimpleNetwork.hh10311:ad9c042dce54 Mon Sep 01 17:55:00 EDT 2014 Nilay Vaish <nilay@cs.wisc.edu> ruby: message buffers: significant changes

This patch is the final patch in a series of patches. The aim of the series
is to make ruby more configurable than it was. More specifically, the
connections between controllers are not at all possible (unless one is ready
to make significant changes to the coherence protocol). Moreover the buffers
themselves are magically connected to the network inside the slicc code.
These connections are not part of the configuration file.

This patch makes changes so that these connections will now be made in the
python configuration files associated with the protocols. This requires
each state machine to expose the message buffers it uses for input and output.
So, the patch makes these buffers configurable members of the machines.

The patch drops the slicc code that usd to connect these buffers to the
network. Now these buffers are exposed to the python configuration system
as Master and Slave ports. In the configuration files, any master port
can be connected any slave port. The file pyobject.cc has been modified to
take care of allocating the actual message buffer. This is inline with how
other port connections work.
10303:71e0934af9f1 Mon Sep 01 17:55:00 EDT 2014 Nilay Vaish <nilay@cs.wisc.edu> ruby: network: move getNumNodes() to base class
All the implementations were doing the same things.
10082:70f350b13ec0 Fri Feb 21 09:02:00 EST 2014 Nilay Vaish <nilay@cs.wisc.edu> ruby: network: move message buffers to base network class.
10076:f81d94b53661 Thu Feb 20 18:27:00 EST 2014 Nilay Vaish <nilay@cs.wisc.edu> ruby: network: removes unused code.
/gem5/src/mem/ruby/profiler/
H A DSConscript10012:ec5a5bfb941d Fri Jan 10 17:19:00 EST 2014 Nilay Vaish <nilay@cs.wisc.edu> ruby: move all statistics to stats.txt, eliminate ruby.stats
H A DStoreTrace.cc10302:0e9e99e6369a Mon Sep 01 17:55:00 EDT 2014 Nilay Vaish <nilay@cs.wisc.edu> ruby: eliminate type Time
There is another type Time in src/base class which results in a conflict.
/gem5/util/cxx_config/
H A DREADME10458:64809024b924 Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> config: Add the ability to read a config file using C++ and Python

This patch adds the ability to load in config.ini files generated from
gem5 into another instance of gem5 built without Python configuration
support. The intended use case is for configuring gem5 when it is a
library embedded in another simulation system.

A parallel config file reader is also provided purely in Python to
demonstrate the approach taken and to provided similar functionality
for as-yet-unknown use models. The Python configuration file reader
can read both .ini and .json files.

C++ configuration file reading:

A command line option has been added for scons to enable C++ configuration
file reading: --with-cxx-config

There is an example in util/cxx_config that shows C++ configuration in action.
util/cxx_config/README explains how to build the example.

Configuration is achieved by the object CxxConfigManager. It handles
reading object descriptions from a CxxConfigFileBase object which
wraps a config file reader. The wrapper class CxxIniFile is provided
which wraps an IniFile for reading .ini files. Reading .json files
from C++ would be possible with a similar wrapper and a JSON parser.

After reading object descriptions, CxxConfigManager creates
SimObjectParam-derived objects from the classes in the (generated with this
patch) directory build/ARCH/cxx_config

CxxConfigManager can then build SimObjects from those SimObjectParams (in an
order dictated by the SimObject-value parameters on other objects) and bind
ports of the produced SimObjects.

A minimal set of instantiate-replacing member functions are provided by
CxxConfigManager and few of the member functions of SimObject (such as drain)
are extended onto CxxConfigManager.

Python configuration file reading (configs/example/read_config.py):

A Python version of the reader is also supplied with a similar interface to
CxxConfigFileBase (In Python: ConfigFile) to config file readers.

The Python config file reading will handle both .ini and .json files.

The object construction strategy is slightly different in Python from the C++
reader as you need to avoid objects prematurely becoming the children of other
objects when setting parameters.

Port binding also needs to be strictly in the same port-index order as the
original instantiation.
/gem5/src/base/loader/
H A Ddtb_object.cc10508:aa46a8ae3487 Thu Oct 30 00:18:00 EDT 2014 Ali Saidi <Ali.Saidi@ARM.com> arm: Fix multi-system AArch64 boot w/caches.

Automatically extract cpu release address from DTB file.
Check SCTLR_EL1 to verify all caches are enabled.
/gem5/src/mem/ruby/structures/
H A DWireBuffer.cc10301:44839e8febbd Mon Sep 01 17:55:00 EDT 2014 Nilay Vaish <nilay@cs.wisc.edu> ruby: move files from ruby/system to ruby/structures

The directory ruby/system is crowded and unorganized. Hence, the files the
hold actual physical structures, are being moved to the directory
ruby/structures. This includes Cache Memory, Directory Memory,
Memory Controller, Wire Buffer, TBE Table, Perfect Cache Memory, Timer Table,
Bank Array.

The directory ruby/systems has the glue code that holds these structures
together.
/gem5/src/sim/
H A Dsub_system.cc10268:9dac4c781ad6 Sun Aug 10 05:39:00 EDT 2014 Geoffrey Blake <Geoffrey.Blake@arm.com> config: Add SubSystem container for simobjects

This patch adds the SubSystem container for grouping
simobjects together in logical subsystems to facilitate
building a larger system from constituent parts. The container
is simply a non-abstract empty simobject to hold the components
that will be connected as its children. In simulation the
object does not participate, its only use is during configuration
of the system.
H A Dcxx_config.hh10458:64809024b924 Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> config: Add the ability to read a config file using C++ and Python

This patch adds the ability to load in config.ini files generated from
gem5 into another instance of gem5 built without Python configuration
support. The intended use case is for configuring gem5 when it is a
library embedded in another simulation system.

A parallel config file reader is also provided purely in Python to
demonstrate the approach taken and to provided similar functionality
for as-yet-unknown use models. The Python configuration file reader
can read both .ini and .json files.

C++ configuration file reading:

A command line option has been added for scons to enable C++ configuration
file reading: --with-cxx-config

There is an example in util/cxx_config that shows C++ configuration in action.
util/cxx_config/README explains how to build the example.

Configuration is achieved by the object CxxConfigManager. It handles
reading object descriptions from a CxxConfigFileBase object which
wraps a config file reader. The wrapper class CxxIniFile is provided
which wraps an IniFile for reading .ini files. Reading .json files
from C++ would be possible with a similar wrapper and a JSON parser.

After reading object descriptions, CxxConfigManager creates
SimObjectParam-derived objects from the classes in the (generated with this
patch) directory build/ARCH/cxx_config

CxxConfigManager can then build SimObjects from those SimObjectParams (in an
order dictated by the SimObject-value parameters on other objects) and bind
ports of the produced SimObjects.

A minimal set of instantiate-replacing member functions are provided by
CxxConfigManager and few of the member functions of SimObject (such as drain)
are extended onto CxxConfigManager.

Python configuration file reading (configs/example/read_config.py):

A Python version of the reader is also supplied with a similar interface to
CxxConfigFileBase (In Python: ConfigFile) to config file readers.

The Python config file reading will handle both .ini and .json files.

The object construction strategy is slightly different in Python from the C++
reader as you need to avoid objects prematurely becoming the children of other
objects when setting parameters.

Port binding also needs to be strictly in the same port-index order as the
original instantiation.
H A Dcxx_config_ini.cc10458:64809024b924 Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> config: Add the ability to read a config file using C++ and Python

This patch adds the ability to load in config.ini files generated from
gem5 into another instance of gem5 built without Python configuration
support. The intended use case is for configuring gem5 when it is a
library embedded in another simulation system.

A parallel config file reader is also provided purely in Python to
demonstrate the approach taken and to provided similar functionality
for as-yet-unknown use models. The Python configuration file reader
can read both .ini and .json files.

C++ configuration file reading:

A command line option has been added for scons to enable C++ configuration
file reading: --with-cxx-config

There is an example in util/cxx_config that shows C++ configuration in action.
util/cxx_config/README explains how to build the example.

Configuration is achieved by the object CxxConfigManager. It handles
reading object descriptions from a CxxConfigFileBase object which
wraps a config file reader. The wrapper class CxxIniFile is provided
which wraps an IniFile for reading .ini files. Reading .json files
from C++ would be possible with a similar wrapper and a JSON parser.

After reading object descriptions, CxxConfigManager creates
SimObjectParam-derived objects from the classes in the (generated with this
patch) directory build/ARCH/cxx_config

CxxConfigManager can then build SimObjects from those SimObjectParams (in an
order dictated by the SimObject-value parameters on other objects) and bind
ports of the produced SimObjects.

A minimal set of instantiate-replacing member functions are provided by
CxxConfigManager and few of the member functions of SimObject (such as drain)
are extended onto CxxConfigManager.

Python configuration file reading (configs/example/read_config.py):

A Python version of the reader is also supplied with a similar interface to
CxxConfigFileBase (In Python: ConfigFile) to config file readers.

The Python config file reading will handle both .ini and .json files.

The object construction strategy is slightly different in Python from the C++
reader as you need to avoid objects prematurely becoming the children of other
objects when setting parameters.

Port binding also needs to be strictly in the same port-index order as the
original instantiation.
H A Dcxx_config_ini.hh10458:64809024b924 Thu Oct 16 05:49:00 EDT 2014 Andreas Hansson <andreas.hansson@arm.com> config: Add the ability to read a config file using C++ and Python

This patch adds the ability to load in config.ini files generated from
gem5 into another instance of gem5 built without Python configuration
support. The intended use case is for configuring gem5 when it is a
library embedded in another simulation system.

A parallel config file reader is also provided purely in Python to
demonstrate the approach taken and to provided similar functionality
for as-yet-unknown use models. The Python configuration file reader
can read both .ini and .json files.

C++ configuration file reading:

A command line option has been added for scons to enable C++ configuration
file reading: --with-cxx-config

There is an example in util/cxx_config that shows C++ configuration in action.
util/cxx_config/README explains how to build the example.

Configuration is achieved by the object CxxConfigManager. It handles
reading object descriptions from a CxxConfigFileBase object which
wraps a config file reader. The wrapper class CxxIniFile is provided
which wraps an IniFile for reading .ini files. Reading .json files
from C++ would be possible with a similar wrapper and a JSON parser.

After reading object descriptions, CxxConfigManager creates
SimObjectParam-derived objects from the classes in the (generated with this
patch) directory build/ARCH/cxx_config

CxxConfigManager can then build SimObjects from those SimObjectParams (in an
order dictated by the SimObject-value parameters on other objects) and bind
ports of the produced SimObjects.

A minimal set of instantiate-replacing member functions are provided by
CxxConfigManager and few of the member functions of SimObject (such as drain)
are extended onto CxxConfigManager.

Python configuration file reading (configs/example/read_config.py):

A Python version of the reader is also supplied with a similar interface to
CxxConfigFileBase (In Python: ConfigFile) to config file readers.

The Python config file reading will handle both .ini and .json files.

The object construction strategy is slightly different in Python from the C++
reader as you need to avoid objects prematurely becoming the children of other
objects when setting parameters.

Port binding also needs to be strictly in the same port-index order as the
original instantiation.
H A Dsub_system.hh10268:9dac4c781ad6 Sun Aug 10 05:39:00 EDT 2014 Geoffrey Blake <Geoffrey.Blake@arm.com> config: Add SubSystem container for simobjects

This patch adds the SubSystem container for grouping
simobjects together in logical subsystems to facilitate
building a larger system from constituent parts. The container
is simply a non-abstract empty simobject to hold the components
that will be connected as its children. In simulation the
object does not participate, its only use is during configuration
of the system.
/gem5/tests/quick/se/00.hello/ref/power/linux/simple-atomic/
H A Dsimout10036:80e84beef3bb Fri Jan 24 16:29:00 EST 2014 Ali Saidi <Ali.Saidi@ARM.com> stats: update stats for cache occupancy and clock domain changes
/gem5/src/arch/x86/
H A Ddecoder_tables.cc10593:a39de7b8d2c9 Thu Dec 04 18:53:00 EST 2014 Gabe Black <gabeblack@google.com> x86: Rework opcode parsing to support 3 byte opcodes properly.

Instead of counting the number of opcode bytes in an instruction and recording
each byte before the actual opcode, we can represent the path we took to get to
the actual opcode byte by using a type code. That has a couple of advantages.
First, we can disambiguate the properties of opcodes of the same length which
have different properties. Second, it reduces the amount of data stored in an
ExtMachInst, making them slightly easier/faster to create and process. This
also adds some flexibility as far as how different types of opcodes are
handled, which might come in handy if we decide to support VEX or XOP
instructions.

This change also adds tables to support properly decoding 3 byte opcodes.
Before we would fall off the end of some arrays, on top of the ambiguity
described above.

This change doesn't measureably affect performance on the twolf benchmark.
H A Dlocked_mem.hh10030:b531e328342d Fri Jan 24 16:29:00 EST 2014 Ali Saidi <Ali.Saidi@ARM.com> cpu: Add CPU support for generatig wake up events when LLSC adresses are snooped.

This patch add support for generating wake-up events in the CPU when an address
that is currently in the exclusive state is hit by a snoop. This mechanism is required
for ARMv8 multi-processor support.
/gem5/build_opts/
H A DARM10259:ebb376f73dd2 Wed Jul 23 17:09:00 EDT 2014 Andrew Bardsley <Andrew.Bardsley@arm.com> cpu: `Minor' in-order CPU model

This patch contains a new CPU model named `Minor'. Minor models a four
stage in-order execution pipeline (fetch lines, decompose into
macroops, decompose macroops into microops, execute).

The model was developed to support the ARM ISA but should be fixable
to support all the remaining gem5 ISAs. It currently also works for
Alpha, and regressions are included for ARM and Alpha (including Linux
boot).

Documentation for the model can be found in src/doc/inside-minor.doxygen and
its internal operations can be visualised using the Minorview tool
utils/minorview.py.

Minor was designed to be fairly simple and not to engage in a lot of
instruction annotation. As such, it currently has very few gathered
stats and may lack other gem5 features.

Minor is faster than the o3 model. Sample results:

Benchmark | Stat host_seconds (s)
---------------+--------v--------v--------
(on ARM, opt) | simple | o3 | minor
| timing | timing | timing
---------------+--------+--------+--------
10.linux-boot | 169 | 1883 | 1075
10.mcf | 117 | 967 | 491
20.parser | 668 | 6315 | 3146
30.eon | 542 | 3413 | 2414
40.perlbmk | 2339 | 20905 | 11532
50.vortex | 122 | 1094 | 588
60.bzip2 | 2045 | 18061 | 9662
70.twolf | 207 | 2736 | 1036
/gem5/tests/configs/
H A Drealview64-o3-checker.py10512:b423e1d0735e Thu Oct 30 00:18:00 EDT 2014 Ali Saidi <Ali.Saidi@ARM.com> arm, tests: Update config files to more recent kernels and create 64-bit regressions.

This changes the default ARM system to a Versatile Express-like system that supports
2GB of memory and PCI devices and updates the default kernels/file-systems for
AArch64 ARM systems (64-bit) to support up to 32GB of memory and PCI devices. Some
platforms that are no longer supported have been pruned from the configuration files.

In addition a set of 64-bit ARM regressions have been added to the regression system.
H A Drealview64-o3-dual.py10512:b423e1d0735e Thu Oct 30 00:18:00 EDT 2014 Ali Saidi <Ali.Saidi@ARM.com> arm, tests: Update config files to more recent kernels and create 64-bit regressions.

This changes the default ARM system to a Versatile Express-like system that supports
2GB of memory and PCI devices and updates the default kernels/file-systems for
AArch64 ARM systems (64-bit) to support up to 32GB of memory and PCI devices. Some
platforms that are no longer supported have been pruned from the configuration files.

In addition a set of 64-bit ARM regressions have been added to the regression system.
H A Drealview64-o3.py10512:b423e1d0735e Thu Oct 30 00:18:00 EDT 2014 Ali Saidi <Ali.Saidi@ARM.com> arm, tests: Update config files to more recent kernels and create 64-bit regressions.

This changes the default ARM system to a Versatile Express-like system that supports
2GB of memory and PCI devices and updates the default kernels/file-systems for
AArch64 ARM systems (64-bit) to support up to 32GB of memory and PCI devices. Some
platforms that are no longer supported have been pruned from the configuration files.

In addition a set of 64-bit ARM regressions have been added to the regression system.
/gem5/src/arch/power/
H A Dlocked_mem.hh10030:b531e328342d Fri Jan 24 16:29:00 EST 2014 Ali Saidi <Ali.Saidi@ARM.com> cpu: Add CPU support for generatig wake up events when LLSC adresses are snooped.

This patch add support for generating wake-up events in the CPU when an address
that is currently in the exclusive state is hit by a snoop. This mechanism is required
for ARMv8 multi-processor support.
/gem5/src/arch/sparc/
H A Dlocked_mem.hh10030:b531e328342d Fri Jan 24 16:29:00 EST 2014 Ali Saidi <Ali.Saidi@ARM.com> cpu: Add CPU support for generatig wake up events when LLSC adresses are snooped.

This patch add support for generating wake-up events in the CPU when an address
that is currently in the exclusive state is hit by a snoop. This mechanism is required
for ARMv8 multi-processor support.

Completed in 76 milliseconds

<<31323334353637383940>>