Searched hist:11244 (Results 1 - 25 of 29) sorted by relevance
| /gem5/tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/ | ||
| H A D | simerr | 11281:953f7d1cc9e3 Wed Dec 30 11:18:00 EST 2015 Steve Reinhardt <stever@gmail.com> stats: more updates due to PCI changes A couple of the long regressions have been showing as CHANGED since 11244:a2af58a06c4e despite the updates in 11245:1c5102c0a7a9. The x86 regression looks like it was just missed, but it's not clear why the ARM one is giving different results (perhaps a non-determinism between zizzer and wherever the updated results were run?). |
| H A D | system.pc.com_1.terminal | 11281:953f7d1cc9e3 Wed Dec 30 11:18:00 EST 2015 Steve Reinhardt <stever@gmail.com> stats: more updates due to PCI changes A couple of the long regressions have been showing as CHANGED since 11244:a2af58a06c4e despite the updates in 11245:1c5102c0a7a9. The x86 regression looks like it was just missed, but it's not clear why the ARM one is giving different results (perhaps a non-determinism between zizzer and wherever the updated results were run?). |
| H A D | simout | 11281:953f7d1cc9e3 Wed Dec 30 11:18:00 EST 2015 Steve Reinhardt <stever@gmail.com> stats: more updates due to PCI changes A couple of the long regressions have been showing as CHANGED since 11244:a2af58a06c4e despite the updates in 11245:1c5102c0a7a9. The x86 regression looks like it was just missed, but it's not clear why the ARM one is giving different results (perhaps a non-determinism between zizzer and wherever the updated results were run?). |
| H A D | config.ini | 11281:953f7d1cc9e3 Wed Dec 30 11:18:00 EST 2015 Steve Reinhardt <stever@gmail.com> stats: more updates due to PCI changes A couple of the long regressions have been showing as CHANGED since 11244:a2af58a06c4e despite the updates in 11245:1c5102c0a7a9. The x86 regression looks like it was just missed, but it's not clear why the ARM one is giving different results (perhaps a non-determinism between zizzer and wherever the updated results were run?). |
| H A D | stats.txt | 11281:953f7d1cc9e3 Wed Dec 30 11:18:00 EST 2015 Steve Reinhardt <stever@gmail.com> stats: more updates due to PCI changes A couple of the long regressions have been showing as CHANGED since 11244:a2af58a06c4e despite the updates in 11245:1c5102c0a7a9. The x86 regression looks like it was just missed, but it's not clear why the ARM one is giving different results (perhaps a non-determinism between zizzer and wherever the updated results were run?). |
| /gem5/src/dev/pci/ | ||
| H A D | host.hh | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | types.hh | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | host.cc | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | SConscript | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | PciHost.py | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| /gem5/src/dev/x86/ | ||
| H A D | pc.hh | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | pc.cc | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | Pc.py | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | SouthBridge.py | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| /gem5/src/dev/alpha/ | ||
| H A D | tsunami.hh | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | tsunami_pchip.hh | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | Tsunami.py | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | tsunami.cc | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | tsunami_pchip.cc | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| /gem5/src/dev/arm/ | ||
| H A D | realview.hh | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | realview.cc | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| /gem5/src/dev/ | ||
| H A D | platform.hh | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| H A D | platform.cc | 11244:a2af58a06c4e Fri Dec 04 19:11:00 EST 2015 Andreas Sandberg <andreas.sandberg@arm.com> dev: Rewrite PCI host functionality The gem5's current PCI host functionality is very ad hoc. The current implementations require PCI devices to be hooked up to the configuration space via a separate configuration port. Devices query the platform to get their config-space address range. Un-mapped parts of the config space are intercepted using the XBar's default port mechanism and a magic catch-all device (PciConfigAll). This changeset redesigns the PCI host functionality to improve code reuse and make config-space and interrupt mapping more transparent. Existing platform code has been updated to use the new PCI host and configured to stay backwards compatible (i.e., no guest-side visible changes). The current implementation does not expose any new functionality, but it can easily be extended with features such as automatic interrupt mapping. PCI devices now register themselves with a PCI host controller. The host controller interface is defined in the abstract base class PciHost. Registration is done by PciHost::registerDevice() which takes the device, its bus position (bus/dev/func tuple), and its interrupt pin (INTA-INTC) as a parameter. The registration interface returns a PciHost::DeviceInterface that the PCI device can use to query memory mappings and signal interrupts. The host device manages the entire PCI configuration space. Accesses to devices decoded into the devices bus position and then forwarded to the correct device. Basic PCI host functionality is implemented in the GenericPciHost base class. Most platforms can use this class as a basic PCI controller. It provides the following functionality: * Configurable configuration space decoding. The number of bits dedicated to a device is a prameter, making it possible to support both CAM, ECAM, and legacy mappings. * Basic interrupt mapping using the interruptLine value from a device's configuration space. This behavior is the same as in the old implementation. More advanced controllers can override the interrupt mapping method to dynamically assign host interrupts to PCI devices. * Simple (base + addr) remapping from the PCI bus's address space to physical addresses for PIO, memory, and DMA. |
| /gem5/tests/long/fs/10.linux-boot/ref/arm/linux/realview-o3-dual/ | ||
| H A D | config.ini | 11281:953f7d1cc9e3 Wed Dec 30 11:18:00 EST 2015 Steve Reinhardt <stever@gmail.com> stats: more updates due to PCI changes A couple of the long regressions have been showing as CHANGED since 11244:a2af58a06c4e despite the updates in 11245:1c5102c0a7a9. The x86 regression looks like it was just missed, but it's not clear why the ARM one is giving different results (perhaps a non-determinism between zizzer and wherever the updated results were run?). |
| H A D | simout | 11281:953f7d1cc9e3 Wed Dec 30 11:18:00 EST 2015 Steve Reinhardt <stever@gmail.com> stats: more updates due to PCI changes A couple of the long regressions have been showing as CHANGED since 11244:a2af58a06c4e despite the updates in 11245:1c5102c0a7a9. The x86 regression looks like it was just missed, but it's not clear why the ARM one is giving different results (perhaps a non-determinism between zizzer and wherever the updated results were run?). |
Completed in 99 milliseconds