[ 0.000000] Linux version 2.6.38.8-gem5 (saidi@zeep) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 SMP Mon Aug 15 21:18:38 EDT 2011 [ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: ARM-RealView PBX [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] DMA zone: 256 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 32512 pages, LIFO batch:7 [ 0.000000] PERCPU: Embedded 7 pages/cpu @c0556000 s6272 r8192 d14208 u32768 [ 0.000000] pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 125376k/125376k available, 5696k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB) [ 0.000000] .text : 0xc0029000 - 0xc031c044 (3021 kB) [ 0.000000] .data : 0xc031e000 - 0xc0336b40 ( 99 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:128 [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480) [ 0.000000] pid_max: default: 32768 minimum: 301 [ 0.000000] Mount-cache hash table entries: 512 [ 0.000000] CPU: Testing write buffer coherency: ok [ 0.000000] Calibrating local timer... 1000.00MHz. [ 0.000104] CPU1: Booted secondary processor [ 0.000104] CPU1: Unknown IPI message 0x1 [ 0.000104] Brought up 2 CPUs [ 0.000104] SMP: Total of 2 processors activated (7995.39 BogoMIPS). [ 0.000104] devtmpfs: initialized [ 0.000105] NET: Registered protocol family 16 [ 0.000105] Serial: AMBA PL011 UART driver [ 0.000106] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3 [ 0.000106] console [ttyAMA0] enabled, bootconsole disabled [ 0.000106] console [ttyAMA0] enabled, bootconsole disabled [ 0.000108] bio: create slab at 0 [ 0.000108] SCSI subsystem initialized [ 0.000108] libata version 3.00 loaded. [ 0.000108] Switching to clocksource timer3 [ 0.000112] NET: Registered protocol family 2 [ 0.000113] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000113] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000113] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000113] TCP: Hash tables configured (established 4096 bind 4096) [ 0.000113] TCP reno registered [ 0.000113] UDP hash table entries: 128 (order: 0, 4096 bytes) [ 0.000113] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) [ 0.000113] NET: Registered protocol family 1 [ 0.000113] msgmni has been set to 244 [ 0.000113] io scheduler noop registered (default) [ 0.000114] CLCD: RealView hardware, XVGA display [ 0.000161] Console: switching to colour frame buffer device 128x48 [ 0.000171] brd: module loaded [ 0.000172] loop: module loaded [ 0.000173] scsi0 : pata_platform [ 0.000173] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100 [ 0.000173] slram: not enough parameters. [ 0.000174] mousedev: PS/2 mouse device common for all mice [ 0.000174] TCP cubic registered [ 0.000174] NET: Registered protocol family 17 [ 0.000174] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0 [ 0.000434] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66 [ 0.000434] ata1.00: 1048320 sectors, multi 0: LBA [ 0.000434] ata1.00: configured for PIO [ 0.000434] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5 [ 0.000434] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB) [ 0.000434] sd 0:0:0:0: [sda] Write Protect is off [ 0.000434] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.000434] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.000434] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 0.000435] sda: sda1 [ 0.000435] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.001215] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0 [ 0.003993] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1 [ 0.004063] VFS: Mounted root (ext2 filesystem) on device 8:1. [ 0.004063] devtmpfs: mounted [ 0.004063] Freeing init memory: 132K init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST) starting pid 336, tty '': '/etc/rc.d/rc.local' warning: can't open /etc/mtab: No such file or directory Thu Jan 1 00:00:02 UTC 1970 S: devpts Thu Jan 1 00:00:02 UTC 1970