Linux version 2.6.22.9 (gblack@fajita) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #12 SMP Fri Feb 27 22:10:33 PST 2009 Command line: earlyprintk=ttyS0 console=ttyS0 lpj=7999923 root=/dev/hda1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000008000000 (usable) BIOS-e820: 0000000008000000 - 00000000c0000000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) end_pfn_map = 1048576 kernel direct mapping tables up to 100000000 @ 8000-d000 DMI 2.5 present. Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 32768 Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: MPTABLE: Product ID: MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) Processor #1 I/O APIC #2 at 0xFEC00000. Setting APIC routing to flat Processors: 2 Allocating PCI resources starting at c4000000 (gap: c0000000:3fff0000) PERCPU: Allocating 34160 bytes of per cpu data Built 1 zonelists. Total pages: 30613 Kernel command line: earlyprintk=ttyS0 console=ttyS0 lpj=7999923 root=/dev/hda1 Initializing CPU#0 PID hash table entries: 512 (order: 9, 4096 bytes) Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2000.000 MHz processor. Console: colour dummy device 80x25 console handover: boot [earlyser0] -> real [ttyS0] Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Checking aperture... Memory: 121996k/131072k available (3699k kernel code, 8524k reserved, 1767k data, 248k init) Calibrating delay loop (skipped)... 3999.96 BogoMIPS preset Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) using mwait in idle threads. Freeing SMP alternatives: 34k freed Using local APIC timer interrupts. result 7812506 Detected 7.812 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay loop (skipped)... 3999.96 BogoMIPS preset CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Fake M5 x86_64 CPU stepping 01 Brought up 2 CPUs migration_cost=11 NET: Registered protocol family 16 PCI: Using configuration type 1 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 16 PCI-GART: No AMD northbridge found. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 1, 8192 bytes) TCP established hash table entries: 4096 (order: 4, 98304 bytes) TCP bind hash table entries: 4096 (order: 4, 65536 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 8250 floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:04.0 PCI: Enabling device 0000:00:04.0 (0000 -> 0001) PIIX4: chipset revision 0 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:DMA hda: M5 IDE Disk, ATA DISK drive hdb: M5 IDE Disk, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 1048320 sectors (536 MB), CHS=1040/16/63, UDMA(33) hda: hda1 hdb: max request size: 128KiB hdb: 4177920 sectors (2139 MB), CHS=4144/16/63, UDMA(33) hdb: unknown partition table megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007 Fusion MPT base driver 3.04.04 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.04 Fusion MPT SAS Host driver 3.04.04 ieee1394: raw1394: /dev/raw1394 device initialized USB Universal Host Controller Interface driver v3.0 usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 input: PS/2 Generic Mouse as /class/input/input1 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 248k freed INIT: version 2.86 booting mounting filesystems... loading script...