/* * Copyright (c) 2007 The Hewlett-Packard Development Company * All rights reserved. * * Redistribution and use of this software in source and binary forms, * with or without modification, are permitted provided that the * following conditions are met: * * The software must be used only for Non-Commercial Use which means any * use which is NOT directed to receiving any direct monetary * compensation for, or commercial advantage from such use. Illustrative * examples of non-commercial use are academic research, personal study, * teaching, education and corporate research & development. * Illustrative examples of commercial use are distributing products for * commercial advantage and providing services using the software for * commercial advantage. * * If you wish to use this software or functionality therein that may be * covered by patents for commercial use, please contact: * Director of Intellectual Property Licensing * Office of Strategy and Technology * Hewlett-Packard Company * 1501 Page Mill Road * Palo Alto, California 94304 * * Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. Redistributions * in binary form must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. Neither the name of * the COPYRIGHT HOLDER(s), HEWLETT-PACKARD COMPANY, nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. No right of * sublicense is granted herewith. Derivatives of the software and * output created using the software may be prepared, but only for * Non-Commercial Uses. Derivatives of the software may be shared with * others provided: (i) the others agree to abide by the list of * conditions herein which includes the Non-Commercial Use restrictions; * and (ii) such Derivatives of the software include the above copyright * notice to acknowledge the contribution from this software where * applicable, this list of conditions and the disclaimer below. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Authors: Gabe Black */ #include "arch/x86/intregs.hh" #include "arch/x86/miscregs.hh" #include "arch/x86/segmentregs.hh" #include "arch/x86/utility.hh" #include "arch/x86/x86_traits.hh" namespace X86ISA { uint64_t getArgument(ThreadContext *tc, int number, bool fp) { #if FULL_SYSTEM panic("getArgument() not implemented for x86!\n"); #else panic("getArgument() only implemented for FULL_SYSTEM\n"); M5_DUMMY_RETURN #endif } # if FULL_SYSTEM void initCPU(ThreadContext *tc, int cpuId) { // The otherwise unmodified integer registers should be set to 0. for (int index = 0; index < NUM_INTREGS; index++) { tc->setIntReg(index, 0); } // These next two loops zero internal microcode and implicit registers. // They aren't specified by the ISA but are used internally by M5's // implementation. for (int index = 0; index < NumMicroIntRegs; index++) { tc->setIntReg(INTREG_MICRO(index), 0); } for (int index = 0; index < NumImplicitIntRegs; index++) { tc->setIntReg(INTREG_IMPLICIT(index), 0); } // Set integer register EAX to 0 to indicate that the optional BIST // passed. No BIST actually runs, but software may still check this // register for errors. tc->setIntReg(INTREG_RAX, 0); //The following values are dictated by the architecture for after a RESET# tc->setMiscReg(MISCREG_CR0, 0x0000000060000010); tc->setMiscReg(MISCREG_CR2, 0); tc->setMiscReg(MISCREG_CR3, 0); tc->setMiscReg(MISCREG_CR4, 0); tc->setMiscReg(MISCREG_CR8, 0); tc->setMiscReg(MISCREG_RFLAGS, 0x0000000000000002); tc->setMiscReg(MISCREG_EFER, 0); SegAttr dataAttr = 0; dataAttr.writable = 1; dataAttr.readable = 1; dataAttr.expandDown = 0; dataAttr.dpl = 0; dataAttr.defaultSize = 0; for (int seg = 0; seg != NUM_SEGMENTREGS; seg++) { tc->setMiscReg(MISCREG_SEG_SEL(seg), 0); tc->setMiscReg(MISCREG_SEG_BASE(seg), 0); tc->setMiscReg(MISCREG_SEG_LIMIT(seg), 0xffff); tc->setMiscReg(MISCREG_SEG_ATTR(seg), dataAttr); } SegAttr codeAttr = 0; codeAttr.writable = 0; codeAttr.readable = 1; codeAttr.expandDown = 0; codeAttr.dpl = 0; codeAttr.defaultSize = 0; tc->setMiscReg(MISCREG_CS, 0xf000); tc->setMiscReg(MISCREG_CS_BASE, 0x00000000ffff0000); // This has the base value pre-added. tc->setMiscReg(MISCREG_CS_LIMIT, 0xffffffff); tc->setMiscReg(MISCREG_CS_ATTR, codeAttr); tc->setPC(0x000000000000fff0 + tc->readMiscReg(MISCREG_CS_BASE)); tc->setNextPC(tc->readPC() + sizeof(MachInst)); tc->setMiscReg(MISCREG_GDTR_BASE, 0); tc->setMiscReg(MISCREG_GDTR_LIMIT, 0xffff); tc->setMiscReg(MISCREG_IDTR_BASE, 0); tc->setMiscReg(MISCREG_IDTR_LIMIT, 0xffff); tc->setMiscReg(MISCREG_LDTR, 0); tc->setMiscReg(MISCREG_LDTR_BASE, 0); tc->setMiscReg(MISCREG_LDTR_LIMIT, 0xffff); tc->setMiscReg(MISCREG_LDTR_ATTR, 0); tc->setMiscReg(MISCREG_TR, 0); tc->setMiscReg(MISCREG_TR_BASE, 0); tc->setMiscReg(MISCREG_TR_LIMIT, 0xffff); tc->setMiscReg(MISCREG_TR_ATTR, 0); // This value should be the family/model/stepping of the processor. // (page 418). It should be consistent with the value from CPUID, but the // actual value probably doesn't matter much. tc->setIntReg(INTREG_RDX, 0); // TODO initialize x87, 64 bit, and 128 bit media state tc->setMiscReg(MISCREG_MTRRCAP, 0x0508); for (int i = 0; i < 8; i++) { tc->setMiscReg(MISCREG_MTRR_PHYS_BASE(i), 0); tc->setMiscReg(MISCREG_MTRR_PHYS_MASK(i), 0); } tc->setMiscReg(MISCREG_MTRR_FIX_64K_00000, 0); tc->setMiscReg(MISCREG_MTRR_FIX_16K_80000, 0); tc->setMiscReg(MISCREG_MTRR_FIX_16K_A0000, 0); tc->setMiscReg(MISCREG_MTRR_FIX_4K_C0000, 0); tc->setMiscReg(MISCREG_MTRR_FIX_4k_C8000, 0); tc->setMiscReg(MISCREG_MTRR_FIX_4K_D0000, 0); tc->setMiscReg(MISCREG_MTRR_FIX_4K_D8000, 0); tc->setMiscReg(MISCREG_MTRR_FIX_4K_E0000, 0); tc->setMiscReg(MISCREG_MTRR_FIX_4K_E8000, 0); tc->setMiscReg(MISCREG_MTRR_FIX_4K_F0000, 0); tc->setMiscReg(MISCREG_MTRR_FIX_4K_F8000, 0); tc->setMiscReg(MISCREG_DEF_TYPE, 0); tc->setMiscReg(MISCREG_MCG_CAP, 0x104); tc->setMiscReg(MISCREG_MCG_STATUS, 0); tc->setMiscReg(MISCREG_MCG_CTL, 0); for (int i = 0; i < 5; i++) { tc->setMiscReg(MISCREG_MC_CTL(i), 0); tc->setMiscReg(MISCREG_MC_STATUS(i), 0); tc->setMiscReg(MISCREG_MC_ADDR(i), 0); tc->setMiscReg(MISCREG_MC_MISC(i), 0); } tc->setMiscReg(MISCREG_DR0, 0); tc->setMiscReg(MISCREG_DR1, 0); tc->setMiscReg(MISCREG_DR2, 0); tc->setMiscReg(MISCREG_DR3, 0); tc->setMiscReg(MISCREG_DR6, 0x00000000ffff0ff0); tc->setMiscReg(MISCREG_DR7, 0x0000000000000400); tc->setMiscReg(MISCREG_TSC, 0); tc->setMiscReg(MISCREG_TSC_AUX, 0); for (int i = 0; i < 4; i++) { tc->setMiscReg(MISCREG_PERF_EVT_SEL(i), 0); tc->setMiscReg(MISCREG_PERF_EVT_CTR(i), 0); } tc->setMiscReg(MISCREG_STAR, 0); tc->setMiscReg(MISCREG_LSTAR, 0); tc->setMiscReg(MISCREG_CSTAR, 0); tc->setMiscReg(MISCREG_SF_MASK, 0); tc->setMiscReg(MISCREG_KERNEL_GS_BASE, 0); tc->setMiscReg(MISCREG_SYSENTER_CS, 0); tc->setMiscReg(MISCREG_SYSENTER_ESP, 0); tc->setMiscReg(MISCREG_SYSENTER_EIP, 0); tc->setMiscReg(MISCREG_PAT, 0x0007040600070406); tc->setMiscReg(MISCREG_SYSCFG, 0x20601); tc->setMiscReg(MISCREG_IORR_BASE0, 0); tc->setMiscReg(MISCREG_IORR_BASE1, 0); tc->setMiscReg(MISCREG_IORR_MASK0, 0); tc->setMiscReg(MISCREG_IORR_MASK1, 0); tc->setMiscReg(MISCREG_TOP_MEM, 0x4000000); tc->setMiscReg(MISCREG_TOP_MEM2, 0x0); tc->setMiscReg(MISCREG_DEBUG_CTL_MSR, 0); tc->setMiscReg(MISCREG_LAST_BRANCH_FROM_IP, 0); tc->setMiscReg(MISCREG_LAST_BRANCH_TO_IP, 0); tc->setMiscReg(MISCREG_LAST_EXCEPTION_FROM_IP, 0); tc->setMiscReg(MISCREG_LAST_EXCEPTION_TO_IP, 0); // Invalidate the caches (this should already be done for us) // TODO Turn on the APIC. This should be handled elsewhere but it isn't // currently being handled at all. // TODO Set the SMRAM base address (SMBASE) to 0x00030000 tc->setMiscReg(MISCREG_VM_CR, 0); tc->setMiscReg(MISCREG_IGNNE, 0); tc->setMiscReg(MISCREG_SMM_CTL, 0); tc->setMiscReg(MISCREG_VM_HSAVE_PA, 0); } #endif void startupCPU(ThreadContext *tc, int cpuId) { if (cpuId == 0) { // This is the boot strap processor (BSP). Initialize it to look like // the boot loader has just turned control over to the 64 bit OS. // Enable paging, turn on long mode, etc. tc->activate(0); } else { // This is an application processor (AP). It should be initialized to // look like only the BIOS POST has run on it and put then put it into // a halted state. } } } //namespace X86_ISA