dev-arm: Conditionally enable HDLcd when doing DTB autogen

This is a preparation change for a real DTB autogen implementation

Change-Id: Ia0c1c5e65ea96036e55455eb4222cec12944d33a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20331
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add HDLcd DTB autogeneration

A Display has been defined. Its sole purpose is to generate the device
tree node to be referenced by the HDLcd device. The encoder parameters
are based on the existing node defined in:

system/arm/dt/armv8.dts

Change-Id: I6cdeb0437dce207dbd0f2c65c16b224245eb74e1
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20330
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Allow IOMMU binding to HDLcd

Change-Id: I894080e7bd76e7efedef141c937e1561c0c0527c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20841
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Store the IOMMU reference from within the SMMU::connect

Change-Id: I35718a71dc040ee4acad9eee2a07076ebb571304
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20840
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Reset HPPI when clearing an LPI

Change-Id: I2a69e6cef69aa48d7c265d59915b859e5eac2bcc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20638
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Add resetHppi method in the GICv3 cpu interface

The method is used for resetting the highest priority pending interrupt
interrupt from the cpu interface if it matches the intid passed as an
argument.

Change-Id: I9fbc4cb3e05a1cc32f853b6afab5c2bc99369435
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20637
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Cleanup GICv3 initialization

This patch is removing the unnecessary initState() / reset() methods
from GICv3 classes, since we can initialize everything at
construction/init time

Change-Id: Ia70edcc4ca4f11878fac0024342e4f2cd81883a0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20636
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Initialize GICD_TYPER once at construction time

Change-Id: Ib4dfdf7005709c22b4ba95099b1192f6edd6ff06
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20635
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Writes to IGRPEN1_EL3 triggering update

Change-Id: I56804eb1bfc8913bd0d3cab05865a382bf270bc1
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20634
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Fix GICv3 ITS cmdq wrapping

Change-Id: I979e8d1378d5b5d2647158798479cf4238f2c349
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20633
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Fix mapping between IGRPEN1_EL3 and IGRPEN1_EL1

Previous mapping was wrong because it was checking which security bits
it was accessing by using the inSecureState() function, whereas it
should have used the isSecureBelowEL3(). This patch is not making the
sostitution since it is optimizing the mapping furthermore by avoiding
updating both IGRPEN1_EL1 and IGRPEN1_EL3 on writes. The IGRPEN1_EL1
register is used as a storage, and any reads/writes to IGRPEN1_EL3 is
routed to that register.

Change-Id: Id318ec44e19d4f844e4e3410d74d0c4f89810811
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20632
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Implement message-based SPIs

Change-Id: I35e79dfd572c3e0d9cadc8e0aab01befd6004ece
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20631
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev: Scrub out some lingering uses of MemObject.

MemObject doesn't do anything any more, and is basically just an alias
for ClockedObject.

Change-Id: Ic0e1658609e4e1d7f4b829fbc421f222e4869dee
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20719
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add GICD_SGIR register

The Distributor Software Generated Interrupt Register is implemented
only if affinity routing is disabled. Since this configuration is
currently not supported in gem5, it has to be treated as RES0.

Change-Id: I9ffcb31b26fc17547f74a4f1d43ce72c59786fa8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20630
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: State update when setting MISCREG_ICC_IGRPENx register

This is because by enabling ainterrupt group at the cpu interface, we
need to check if a previously pending interrupt needs to be forwarded to
the PE.
We are doing the same when globally enabling irqs in the distributor
(GICD_CTLR).

Change-Id: I80aeb87b2a58a108de899006d5a2f12eadbe6c2e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20629
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, dev-arm: MISCREG_ICC_IGRPEN1_EL1 using AA64 banking

Change-Id: Ic08ac1e7f3ebef408a83aa068ce15e9dfe2aa3cd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20628
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, dev-arm: MISCREG_ICC_AP1R0_EL1 using AA64 banking

Change-Id: Ide93464f62288fbe8f409f718487a15512c01295
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20627
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, dev-arm: MISCREG_ICC_CTLR_EL1 using AA64 banking

Change-Id: Ib1691f1cba08251a36ceb959849b61c33cc3e93b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20626
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add read/writeBanked helpers to GICv3

These will be used by AA64 security banked registers in GICv3.

Change-Id: Ia980c4f5c14187ab9c18da1d1d596562644111ae
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20624
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Rewrite ICC_BPR0/ICC_BPR1 handling

The patch is fixing BPR reads in AA32, by removing the line

Gicv3::GroupId group =
misc_reg == MISCREG_ICC_BPR0_EL1 ? Gicv3::G0S : Gicv3::G1S;

Where a read to ICC_BPR0 will return a G1S group.
The patch is also fixing Security banking accesses.

Change-Id: I28f1d1244c44d4b8b202d3141f8380943c7c1c86
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20620
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add GICv3 unimplemented Hyp Active Priorities Group regs

ICH_APxR1, ICH_APxR2, ICH_APxR3 are implemented only if supporting more
than 6 bits of priority. Since this is not the case, they are currently
unimplemented.
According to spec, unimplemented registers are RAZ/WI.

Change-Id: Ifd7f7a3d42b4575c2f7aff3b95d5a47ac1e61842
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20619
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Allow 32-bit access to GITS_TYPER

Change-Id: I9d19174b38ba70f82050102f955ccc162965d1fb
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20618
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Cpu interface groupEnabled check for global enable

Gicv3CPUInterface::groupEnabled should check for global enable flags at
distributor level:
- Gicv3Distributor.EnableGrp0
- Gicv3Distributor.EnableGrp1S
- Gicv3Distributor.EnableGrp1NS

Change-Id: I1c855b0e4c2bc8f1cd0a8f086b9450f516177b08
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20617
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Check if INTID group is enabled when reading HPPIRx

If it is not enabled, it should return INTID_SPOURIOUS

Change-Id: I4dfa8b9fcea874b4d281cd154dd38752b05e1d59
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20616
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Writing GICD_CTLR should trigger an update

This is the case where an interrupt is pending, but the distributor is
masking it. As soon as the group gets enabled, the interrupt should be
forwarded to the PE.

Change-Id: Ie428780bde7e4726688adf78dfcc4d43d1b45261
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20615
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Rewrite GICv3 update

The GICv3 update methods are method which are invoked anytime the model
needs to evaluate a change in its state, which most of the time means
managing the state of an interrupt (forwarding it to a PE, deasserting
it, etc).
The way it is currently done is a little bit obscure and doesn't
handle correctly IRQ prioritization.
Example:
An IRQ which is handled by the redistributor (PPI or LPI) was not
competing with any pending interrupts coming from the distributor (SPIs)
once raised by a peripheral.

Also the way the pending state of an interrupt was removed at the
cpu interface level wasn't happening in place where this was actually
happening (E.g. when activating it), but happened with a weird
fullUpdate semantic, where if there was a pending interrupt in a
cpu interface, all cpu interfaces had their pending interrupt (if any)
been disabled.

With this patch, state update always starts at the distributor, and
it goes down until the cpu interface where a Gicv3CPUInterface::update
method selects the winning interrupt coming from distributor/redistributor
to be forwarded to the PE.

Change-Id: I1c517cbc4bf107cc2d7ae7beb2692e3cf5187a40
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20614
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix GICv3 IGRPMOD writes

Writes to IGRPMOD were not right shifting the value, which resulted in
interrupts having a IGRPMOD value > 1, whereas the only allowed values
are 0 and 1.

Change-Id: Id491bd1b184d6e5abeeea25ea272eeb91792ccf7
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20613
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix SGI generation

The patch is fixing the following aspects of SGIs

* The conditons over which an SGI can be forwarded to a PE
* SGIs in AArch32 (see below)

It is in fact refactoring SGI generation under a common method in the
cpu interface. It is abandoning the implicit fallthrough mechanism not
only for cosmetic reasons, but also because checking "misc_reg ==" was
only working if the register was an AArch64 one (e.g.
MISCREG_ICC_SGI0R_EL1) and not the AArch32 counterpart (MISCREG_SGI0R).

Change-Id: I6fedfb80388666f4f1d20f6abef378a9f093aa83
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20610
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Gicv3 ITS device tree autogen

This patch adds device tree automatic generation for Gicv3 ITS.

Change-Id: Ic01500ffa691b331f527c5c2c785ff715660b0c2
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20609
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: modify GICv3 ITS default addr

The current default base address for GICv3 ITS stated in RealView is
0x2c120000. The redistributors base address is 0x2c010000; each
instantiated core has an associated redistributor with memory region
size 0x40000 (with GICv4 extension, enabled by default). With 8 cores,
the redistributor range spans to 0x2c210000, creating a conflict with
the ITS address space.

This patch changes the ITS base address to 0x2e010000 which guarantees
no overlapping with the redistributor.

Change-Id: I7dc1af9e69ac037f85ae96f0985554f1fb8372a0
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20608
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Improper translation slot release in SMMUv3

The SMMUv3SlaveInterface is using the xlateSlotsRemaining to model a
limit on the number of translation requests it can receive from the
master device.

Patch

https://gem5-review.googlesource.com/c/public/gem5/+/19308/2

moved the resource acquire/release inside the SMMUTranslationProcess
constructor/destructor, for the sake of having a unique place for
calling the signalDrainDone.
While this is convenient, it breaks the original implementation,
which was freeing resources AFTER a translation has completed, but
BEFORE the final memory access (with the translated PA) is performed.
In other words the xlateSlotsRemaining is only modelling translation
slots and should be release once the PA gets produced.

The patch fixes this mismatch by restoring the resource release in
the right place (while keeping the acquire in the constructor)
and by adding a pendingMemAccess counter, which is keeping track
of a complete device memory request (translation + final access)
and will be used by the draining logic

Change-Id: I708fe2d0b6c96ed46f3f4f9a0512f8c1cc43a56c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Adrian Herrera <adrian.herrera@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20260
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Implement invalidateASID in SMMUv3 WalkCache

This patch fixes a bug where issuing a invalidate-by-ASID command
(CMD_TLBI_NH_ASID) to the SMMU would cause Gem5 to crash.

Change-Id: I5b8343a17e43762fe3917560ae401a20be1e05b8
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20259
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Implement invalidateVA/VAA in SMMUv3 WalkCache

This patch implements VA/VAA invalidations in the SMMUv3 model.

As per SMMUv3.0 spec, if leaf bit is specified in the invalidation
command, only leaf entries within the walk cache need to be invalidated,
otherwise entries with intermediate translations are also invalidated.

Change-Id: I0eb1e1f1d8c00671a3c23d2a8fb756f2020d8d46
Reviewed-by: Michiel van Tol <michiel.vantol@arm.com>
Reviewed-by: Marc Mari Barcelo <marc.maribarcelo@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20258
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu, dev, mem: Use the new Port methods.

Use getPeer, takeOverFrom, and << to simplify the use of ports in some
areas.

Change-Id: Idfbda27411b5d6b742f5e4927894302ea6d6a53d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20235
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Fix GICv3 ITS indexing error

Table walks were not considering the entry size when evaluating
the address.

Change-Id: Ica6bf6d88632985ee8ed120448b32e0f7e918a8a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20329
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix GITS_BASER initialization/access

The patch is fixing/improving GITS_BASER registers initialization.

* Not using reserved table types anymore (GITS_BASER.TYPE)
* Using write mask for handling WI bits

Change-Id: Ibe24667fdf22b42b86496167c19fc00bbb0ba191
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20328
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Start using GITS_CTLR.quiescent bit

The GITS_CTLR.quiescent bit is used by priviledged sw to check when the
ITS has finished draining its state (all pending translations/table
walks have ended) once it has been disabled (by setting the
GITS_CTLR.enable bit to 0).
This patch is modelling this behaviour by

* Changing the reset state to enable=0, quiescent=1
* Making the GITS_CTLR.quiescent bit RO
* Updating the bit once a new translation/command is being processed
(quiescent=0) and when there are no pending translation/commands
(quiescent=1)

Change-Id: I7cfe94b25d603400364b1cdfc2d2397acf5dfad8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20257
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Allow 32 bit accesses to GITS_C(WRITER/READR/BASER)

For those registers (GITS_CWRITER, GITS_READR and GITS_CBASER)
Bits [63:32] and bits [31:0] are accessible separately.

Change-Id: Ibf60b5e4fd20efb21a63570e6012862e37946877
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20256
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm,system-arm: missing GICv3 ranges property

This patch adds the device tree "ranges" property to GICv3 for
the VExpress_GEM5_V2 platform. It is also included in the GICv3 DTB
auto generation.
This allows the GICv3 ITS to be specified in the device tree.

Change-Id: I00e1bb0fd45521e34820c0a23ddf047afec7aa4c
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20255
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add redistributor-stride property to GICv3

This is needed since by default the model is assuming a GICv4
memory layout.

Change-Id: Ic64e6a488cc1a43a56ce28f6d11b8868df102aa0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20248
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add GITS_PIDR2 register to the ITS memory map

The GITS Peripheral Identification Register #2 bits assignments are the
same as those for GICD_PIDR2.

Change-Id: I235008a383e08dd557d899cb3aa18202ef943f8b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20254
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add Gicv3Distributor members for GICv3 GICD_PIDRx

There is no need of calculating the value every time the registers
are read.

Change-Id: I58b87abb585fb9928959992927f00d9c000a4c35
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20253
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Enable DTB autogeneration in GICv3

Change-Id: I539ae5ae74bc6f42f291441594a0d14c98e687f4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20053
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix PCI node's interrupt-map property

The PCI host has an interrupt-map property which only works for a fixed
setup of parent/child interrupt/address cells, which currently overlaps
with GICv2.
We want to make this flexible, so that the interrupt-map doesn't break
if we change the interrupt/address-cells value, and the patch is aiming
in that direction. This is also needed for GICv3 DTB autogeneration,
since it is using different values than GICv2.

Change-Id: If1c661ddcbc0c277c9d6b0e44a0fd3fe2427618c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20052
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Use FdtState to generate GIC properites

Rather than hardcoding property values, we use a FdtState variable, so
that it is possible to retrieve them from an external object.

Change-Id: Ifd90814b03c68a7f55ef3be6123dcfee5e1de568
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20051
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Perform SMMUv3 CFG Invalidation at device interface

In the current SMMUv3 model, multiple micro/mainTLB are present at the
device interface (SMMUv3SlaveInterface), caching translations specific
to a device.
Those distributed TLBs are checked for a translation before checking for
centralized TLBs (shared by devices), like the configuration cache, walk
cache etc. This means that if a hit in these TLBs occurs, there won't
be a need to enter configuration stage (which is where the STE and CD
are retrieved). So if we invalidate a cached configuration (in
ConfigCache), we need to invalidate those interface TLB entries as well,
otherwise in theory we will keep the same translation even after a
change in configuration tables.

Change-Id: I4aa36ba8392a530267517bef7562318b282bee25
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Michiel van Tol <michiel.vantol@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19813
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Rewrite SMMUv3 Commands

This patch is rewriting the SMMUv3::processCommand method for the
following reasons:

* Command names were not matching spec
* Command encoding/opcode was wrong

The patch is not adding any new command: there is still a subset of
unimplemented commands; those are:

* CMD_TLBI_EL3_ALL
* CMD_TLBI_EL3_VA
* CMD_TLBI_EL2_ALL
* CMD_TLBI_EL2_VA
* CMD_TLBI_EL2_VAA
* CMD_TLBI_EL2_ASID

which require StreamWorld support, and

* CMD_ATC_INV
* CMD_PRI_RESP
* CMD_RESUME
* CMD_STALL_TERM

which require in sequence: ATS, PRI, Stall Model support

Change-Id: Ia2dd47b5588738402d9584a00cfc88c94c253ad0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Michiel van Tol <michiel.vantol@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19668
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix SMMUv3 CMDQ wrapping

SMMU circular queues have a wrap bit which is used in order to
distinguish between an empty queue and a full queue.

According to SMMUv3 spec:

Each index has a wrap flag, represented by the next higher bit adjacent
to the index value contained in PROD and CONS. This bit must toggle each
time the index wraps off the high end and back onto the low end of the
buffer. It is the responsibility of the owner of each index, producer or
consumer, to toggle this bit when the owner updates the index after
wrapping. It is intended that software reads the register, increments or
wraps the index (toggling wrap when required) and writes back both wrap
and index fields at the same time.

Change-Id: Idfeb397141f3627c2878caaeaa2625fadf671d2a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Michiel Van Tol <michiel.vantol@arm.com>
Reviewed-by: Adrian Herrera <adrian.herrera@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19311
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Polish SMMUv3 CMDQ setup

The patch is aiming to be spec compliant when it comes to setup
the SMMU command queue (while CR0.CMDQEN = 0), in the following ways:

* Writes to CMDQ_CONS (read index) are allowed during initialization
* Writes to CMDQ_BASE (cmdq pointer) are allowed during initialization

According to spec,
If they happen when the command queue is in fuction (CR0.CMDQEN = 1),
behaviour is constrained unpredictable, with the following options

1) The write is ignored
2) The register takes the value and it is unpredictable whether it
affects the SMMU command queue internal state.

In the model/patch we go for option 1.

Change-Id: I1c55bc571a8b3a1c0b0a525e429ab7b1480544ff
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Michiel Van Tol <michiel.vantol@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19633
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Define enum masks for SMMU_CR0 register

The configuration register is a vital register in the SMMU, and using
enum masks will make the code more readable/understandable

Change-Id: Ia117db56c457fe876ae38be391c386e502f34384
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Michiel Van Tol <michiel.vantol@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19632
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: TnSZ fields need to be cached in SMMUv3::ConfigCache

Otherwise a hit after a table walk will result in a 0 value being
read from the ConfigCache.

Change-Id: I9813998acce44c93c5ce203f252ca80c10ba8f38
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Michiel Van Tol <michiel.vantol@arm.com>
Reviewed-by: Adrian Herrera <adrian.herrera@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19631
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: SMMUv3 Table walks using TnSZ

TnSZ is needed when selecting the starting level of a table
walk, since it directly affects the number of IA bits.
This has been implemented by adding T0SZ and S2T0SZ to the
translation context.
T1SZ is not used at the moment since the current model doesn't
support TTB1.

Change-Id: I75663475c4dc01e5986cd93f8deafcdf7b1ece82
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Michiel Van Tol <michiel.vantol@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19630
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Use override keyword for SMMUv3 PTOPS

Replacing the "virtual" keyword

Change-Id: I0e7b4b683ea222827a67c3a81f0deea0e906c7e5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Michiel Van Tol <michiel.vantol@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19629
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add 16K granule support to SMMUv3 model

Added the necessary PageTableOps that match the 16K granule
translation regime.

Change-Id: I46ef07939cb4bdc8c0bbbeeeb6a50a9ab0d64de0
Reviewed-by: Michiel Van Tol <michiel.vantol@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19628
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: clang compatibility fix, added missing overrides

Change-Id: I5ee5ff788570178bb1d68878a26ac9e3ce636d8e
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19588
Reviewed-by: Matteo Andreozzi <matteo.andreozzi@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix SMMUv3 ContextDescriptor pointer shift

The context descriptor pointer in the STE starts at the sixth LSB

Change-Id: Ifa346b350785b788e9d1e093b662cb26433adfb8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Christo Smallwood <christo.smallwood@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19469
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: A9SCU fixup

Shifting instead of expensive power.

Change-Id: I164933257db125e18721c5b8bcaf9702030ebf40
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19408
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Use global import path for MemObject

Change-Id: I66e0ca6df689ec6aeb831ef5545e8e5842bb0418
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19348
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Remove un-needed Q_CONS_PROD_MASK macro

Change-Id: I858d7eea088bbdd2dc12123e21e59991c896597f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Michiel Van Tol <michiel.vantol@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19310
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: drain implementation for SMMUv3

SMMUv3 is drained when (1) no SMMU translations are pending
on any of its slave interfaces and (2) no commands are stored
in the Command Queue waiting to be processed.

Change-Id: I81cef5fd821fa5e509e130af02aece5239493df5
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19309
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: pending SMMU transl update on constructor/destructor

Change-Id: I6f61651123aab129cfbe5a88aa6355cd21544a5e
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19308
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Reapply GICv3 changes that were lost during refactoring

The GICv3 code refactoring performed by:

https://gem5-review.googlesource.com/c/public/gem5/+/16484

reverted the following patches

https://gem5-review.googlesource.com/c/public/gem5/+/16544
https://gem5-review.googlesource.com/c/public/gem5/+/16545/3

This commit is reintroducing them

Change-Id: I2c875c11570ed66ec9203449446faca3864c64d6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19229
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Implement a SMMUv3 model

This is an implementation of the SMMUv3 architecture.

What can it do?
- Single-stage and nested translation with 4k or 64k granule. 16k would
be straightforward to add.
- Large pages are supported.
- Works with any gem5 device as long as it is issuing packets with a
valid (Sub)StreamId

What it can't do?
- Fragment stage 1 page when the underlying stage 2 page is smaller. S1
page size > S2 page size is not supported
- Invalidations take zero time. This wouldn't be hard to fix.
- Checkpointing is not supported
- Stall/resume for faulting transactions is not supported

Additional contributors:
- Michiel W. van Tol <Michiel.VanTol@arm.com>
- Giacomo Travaglini <giacomo.travaglini@arm.com>

Change-Id: Ibc606fccd9199b2c1ba739c6335c846ffaa4d564
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19008
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch, base, dev, sim: Remove now unnecessary casts from PortProxy methods.

Change-Id: Ia73b2d86a10d02fa09c924a4571477bb5f200eb7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18572
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

dev-arm: Provide a GICv3 ITS Implementation

This patch introduces the GICv3 ITS module, which is in charge of
translating MSIs into physical (GICv3) and virtual (GICv4) LPIs. The
patch is only GICv3 compliant, which means that there is no direct
virtual LPI injection (this also means V* commands are unimplemented)
Other missing features are:

* No 2level ITS tables (only flat table supported)

* Command errors: when there is an error in the ITS, it is
IMPLEMENTATION DEFINED on how the ITS behaves. There are three possible
scenarios (see GICv3 TRM) and this implementation only supports one of
these (which is, aborting the command and jumping to the next one).
Furter patches could make it possible to select different reactions

* Invalidation commands (INV, INVALL) are only doing the memory table
walks, assuming the current Gicv3Redistributor is not caching any
configuration table entry.

Change-Id: If4ae9267ac1de7b20a04986a2af3ca3109743211
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18601
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Store a PhysProxy port in Gicv3Redist

This spares us from retrieving the TC pointer every time we want to
write/read to memory (LPIs)

Change-Id: Iad76b5e69188fa0ac5c6777a3b2664b0fc66b12f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18600
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add named variable for GICD_TYPER.IDBits

This could be used by other GICv3 components to query the maximum
number of implemented interrupt identifiers

Change-Id: I132e50de331aea22523260bcefba7e961b53eccd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18599
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Read correct version of ICC_BPR register

Some methods like groupPriorityMask check for the value of binary point
registers. Those registers have a minimum value. Writing to those
register is taking this into account, but the problem with the minimum
value arises when the value is checked before sw is writing to them.
In this case the minimum value won't be considered if the read is
directly forwarded to the ISA class.

Change-Id: Id432a37f1634b02bc478d65c52ffb88323d4bb77
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18598
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Get a Gicv3Redistributor ptr from phys address

The patch is adding the following method to Gicv3:

* Gicv3::getRedistributorByAddr
This will be needed by the ITS when trying to select the target
redistributor after decoding the collection table entry (RDBase).

Change-Id: I40e2c155f2fdc8ca6d3c20ff7a27702e02499f20
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18597
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add several LPI methods in Gicv3Redistributor

Refactoring the existing in code in smaller methods will be crucial when
adding the ITS module, which is a client for the redistributor class and
which will require it to take different actions depending on the command
it receives from software.

List of methods:

* read/writeEntryLPI
Reading/Writing a byte from the LPI pending table

* isPendingLPI
Checks if the pINTID LPI is set. Knowing if an LPI is set is needed by
the MOVI command, which is transfering the pending state from one
redistributor to the other only if the LPI is pending.

Change-Id: If14b1c28ff7f2aa20b12dcd822bf6a490cbe0270
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18596
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Take LPIs into account when interacting with CPUIF regs

Previous code was not handling LPIs when it came to
activation/deactivation of interrupts.

Change-Id: Ie38f83c66afdc42132679d7e2e5823990f1710d0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18595
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix GICv3 LPIs priority value

Priority bits in the LPI configuration table entry are only the MSBits
([7:2]) and need to be shifted in order to get the real LPI priority
value.

Change-Id: Id04dd4fa9113a32712c73a7094df498de3c0d2b5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18594
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Disable LPI Configuration Table caching

This is done since caching is not done correctly, and we don't care for
now about performance degradations since the redistributor is using
PhysProxy ports.
Caching will make sense once the magical accesses will be replaced by
real atomic/timing transactions.

Change-Id: Iafe2a7843210111efc82c265bd0d5ec3cd9abb5a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18593
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Check EnableLPIs before checking for pending LPIs

Before reading the tables, GICR_PENDBASER and GICR_PROPBASER need to be
properly set, and those will have a consistent value only once sw
enables LPIs.

Change-Id: Ifb87944a491045e7a13ce7a280c555cb0c1e47f4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18592
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: GICv3 LPI tables are using physical addresses

Change-Id: I439112f318720ae74c43a374fd3a524c607b3a23
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18591
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix GICv3 LPI loop

Loop was mistakenly increasing the upper bound of the iteration rather
than the index variable itself.

Change-Id: I0a5a7bc189bc0954a8a6d9581032c2ed902030da
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18590
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix Bitwise operation in GICv3

GICv3 LPI code is wrongly using the xor operator (^) in order to
evaluate powers of two.

Change-Id: Ib1131fd5940d334967a3741f8fd15d86625be356
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18589
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Move GICv3 (Re)Ditributor address in Realview.py

Base addresses for GICv3's Distributor and Redistributors are
implementation defined: they depend on the platform rather than the
model. This patch is then moving dist_addr and redist_addr
initialization in Realview.py

Change-Id: I1246df500262f4d3d5a38e62d0240945f90941ee
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18393
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Limit number of max PE in GICv3 to 128

This is needed since there is a problem in the memory layout of
VExpress_GEM5_V2 as it is: having 256KB pages is creating overlapping
regions when reserving space for 256 PEs.

GICv3 redistributors: 0x2c010000 - 0x30010000
PCI regions: 0x30000000 - 0x40000000

We fix this by cutting down the number of supported PEs to 128

Change-Id: I6e87f66a6150a441ccba298662b4548a4972dc40
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18392
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add GICv4 extension switch in GICv3

This is currently used only for determining which is the correct
size of redistributors in memory (256KB in GICv4 and 128KB in GICv3)

Change-Id: I2c07005e97167fde03548313c9927176788f31dd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18391
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Check for maximum number of supported PE in GICv3

This is currently set to 256

Change-Id: If7bb2847c22f29bfa0cb4ebf4a7984ee43ab4e29
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18390
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Make GICv3 maintenance interrupt an ArmInterrupt

Change-Id: I88e2b72849cdf3f69026c62517303837e7d3d551
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17629
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Rename GIC maintenance interrupt from ppint to maint_int

ppint is a generic name which only reflects Arm recommendation of
assigning the maintanance interrupt to a PPI (numbered 25)

Change-Id: Ic5abb6ed50817ad2d165b5df46dd989eb195a9db
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17628
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Fix GICv3 overflow for INTID > 256

SPIs can get to a maximum number of 1023, so that an uint8_t is not capable
of representing all of them.

Change-Id: I7a2c43b41ac93eabdfcf8311681240416b954177
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17631
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Writing ICENABLER for non-SPIs is RAZ/WI (or RES0)

For SGIs and PPIs:
* When ARE is 1 (only value supported in gem5) for the Security state of
an interrupt, the field for that interrupt is RES0 and an implementation
is permitted to make the field RAZ/WI in this case.

Change-Id: I6da2a89b1c848d458f42540e0113e7139b910abb
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17630
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Set/Unset dma coherent mode from python

With this patch it will be possible to automatically enable/disable the
dma-coherent property for the GenericArmPciHost autogenerated DTB. This
has been done by adding the _dma_coherent param.

Change-Id: I1759fced74e42410462637ca77997a351314a90a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/16748
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: cleanup of gicv3 CPU interface code and fixes

Change-Id: I4643140f60da4dc9179b5bfed1e3ddd7c2f23091
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/16484
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev-arm: cleanup of gicv3 code

Change-Id: I9aba90022f6408838c4ab87c6b90bba438752e53
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/16222
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev-arm: Set ICV_PMR_EL1-ICH_VMCR_EL2 mapping on reads

Reading ICV_PMR_EL1 should return the value the VMCR_EL2.VPMR bits
which are aliased to the register.

Change-Id: Id3e6dfb196f3726edaa3eddb244765598ed62334
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jan-Peter Larsson <jan-peter.larsson@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16545
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Set ICV_IGRPEN<n>_EL1-ICH_VMCR_EL2 mapping on reads

Reading ICV_IGRPEN<n>_EL1 should return the value of VMCR_EL2.VENG0 and
VMCR_EL2.VENG1 bits.

Change-Id: Ia5d748cf60ba074cccf4c127ac479c5cb881773d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jan-Peter Larsson <jan-peter.larsson@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16544
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: LPI support for GICv3. This doesn't include an ITS model.

Change-Id: Ia2c02cca4f95672d6361fba16201a56e2047ddb7
Reviewed-on: https://gem5-review.googlesource.com/c/16142
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

python: Don't assume SimObjects live in the global namespace

The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.

Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

configs, arch-arm: Using AddrRange for Realview mem_regions

Physical memory ranges are now saved in Realview objects as pairs of
addresses (start address and size). This patch is substituting them with
a single AddrRange object.

Change-Id: I02d25d557c5c54d062f0dccef8ede45744d0ce6b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16206
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: Removed contextId variable

The contextId variable is only used by the debug flag and will prevent
a more optimised binary (i.e. fast) from compiling.

Change-Id: I6cefb5bc06d0d4b415df62f1278db53ba309fb87
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16042
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev-arm: fix --generate-dtb for ARM

Was failing with:

NameError: global name 'FdtNode' is not defined

The problem was introduced at: 75831ce5b7880b67c1aa2e0871ce16d5c01cadc7

Change-Id: I7e2ce0e5311e7814229945b9f4e7318a8652dc1f
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15875
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: dev: Replace ArmISA::MiscReg with RegVal in the GIC v3 model.

Other dev code was already switched over. This code was written before
the switch over (or unaware of it), and checked in after.

Change-Id: Ibb9e9e4300d01cc46e4dae668274debc2a4989ba
Reviewed-on: https://gem5-review.googlesource.com/c/15755
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: dev: sim: gpu-compute: Banish some ISA specific register types.

These types are IntReg, FloatReg, FloatRegBits, and MiscReg. There are
some remaining types, specifically the vector registers and the CCReg.
I'm less familiar with these new types of registers, and so will look
at getting rid of them at some later time.

Change-Id: Ide8f76b15c531286f61427330053b44074b8ac9b
Reviewed-on: https://gem5-review.googlesource.com/c/13624
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

dev-arm: Add a VExpress_GEM5_V2 platform with GICv3 support

Change-Id: I6fd14138d94654e8e60cde08239ea9a50fc19eb7
Reviewed-on: https://gem5-review.googlesource.com/c/14255
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev-arm: Add a GICv3 model

Change-Id: Ib0067fc743f84ff7be9f12d2fc33ddf63736bdd1
Reviewed-on: https://gem5-review.googlesource.com/c/13436
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev, arm: Warn on PL011 DMA disable

The PL011 spec specifies a DMACR register at offset 0x48, which isn't
implemented in the model. Currently any attempt to access the register
results in a panic.

This change swaps the panic for a warning only when software writes into
DMACR to disable DMA, keeping the panic otherwise.

Change-Id: I04586b52df8d5d174536276fd7ae19e77ff4681a
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15279
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Added VGIC GICV_IIDR response

Change-Id: I60e8eadbbbf07c0f8b726213fd580aeb0dd0e00b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15278
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Implement GIC-400 model from GicV2

Implementation registers for the GICv2 model currently hold values
referring to a GIC-400 implementation. This patch is making them
parametrizable so that it is possible to instantiate a GIC-400 model.
The patch is also modifying Realview platform to use new GIC-400 model
in lieau of GICv2.

Change-Id: I446db8c796ee3c2708af91e9139f0a6e7947321b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15277
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Move VGic from Realview.py to Gic.py

Change-Id: I17f2fb6be2435d4601263e7f68a0582e0cc70838
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15276
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Added unimplemented GICv2 GICC_DIR

This GICC CPU register is not implemented but just gives a warning.

Change-Id: I7630aa1df78dde5cf84a87e26cd580b00b283673
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15275
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Don't panic when EOIR a non active PPI

GIC architecture specification says that writing EOIR with
a not active irq it is an unpredictable behavior.
So, just warn when it happens for a PPI case, like it is
already done in SPI case.

Change-Id: Icb1b8f5690d5e87b15c3b0fe2ca0d37fdd4085ee
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13556
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Fix Gicv2 distributor group register

For each bit in GICD_IGROUPR:
value 0 means corresponding irq is group0
value 1 means corresponding irq is group 1.

Change-Id: I15699d4bc89ff3df0e0bdb41154c0d0989dc2f63
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13555
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Use little endian packet accessors.

We know data is little endian, so we can use those accessors
explicitly.

Change-Id: Iee337109fcda134e1ac5a700e5141fd7060f9c45
Reviewed-on: https://gem5-review.googlesource.com/c/13457
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: remove the RealViewEB platform

This is an old platform, and we haven't had official Linux kernel configs
for it in a while, so we've decided to deprecate it.

Furthermore, trying to use it fails with:

object 'RealViewEB' has no attribute 'pci_host'

and the last commit in the class happened two years ago, which indicates
that no one has been using it.

Change-Id: Icc674b00b152eb3246e05141dbaf2624cc720f21
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/12471
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Enable FIQ signaling for Group0 interrupts in GICv2

Change-Id: Iafaf26344a26eade60c08dd2c0d716af14d9b328
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12948
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Create postFiq events for GICv2

GICv2 is signaling IRQs only to the CPU. This patch is adding the
capability of scheduling FIQs.

Change-Id: I395afc83eb8d58cfd32cd93372bcb6f804364ef5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12947
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Implement GICv2 GICD_IGROUPR register

This patch is implementing GICD_IGROUPR register.

Change-Id: I1626f61fbf7deec9c81d8d2c135f1d6c0c4eb891
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12946
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Fix GICv2 cpu interrupt enable flag

Read/WriteCpu methods in the GICv2 are accessing the GICC_CTRL register
as if writing any non-zero value to the register will enable IRQ
signaling to the CPU. Instead, only the 2 least significant bits
control group0/group1 enablement. This patch is renaming GICC_CTRL
underlying data buffer from cpuEnabled to cpuControl and it is making it
an array of uint32_t instead of bool. cpuEnabled now becomes a method
and checks if GICC_CTRL.EnableGrp0 or GICC_CTRL.EnableGrp0 are set.

Change-Id: I40f0b3c52c40abd482a856f032bf3686f96ef641
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12945
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Add basic support for level sensitive SPIs in GICv2

For level sensitive interrupt IRQ line must be cleared when interrupt is
deasserted. This is not the case for edge-trigerred interrupt.

Change-Id: Ib1660da74a296750c0eb9e20878d4ee64bd23130
Reviewed-on: https://gem5-review.googlesource.com/12944
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Make CpuLocalTimer use standard ArmInterruptPin

Change-Id: I8c4eb9389b47df8cdf1eec966bb2c9da85a7a7c8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12744
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Take into account PPI enable bit

When checking for PPIs to send to the cpu in the PL390 GIC we
were forwarding any pending PPI regardless of their masking
in the distributor.

Change-Id: I2e294abeca733cca95cd0deeb9659c7d3d9d8734
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12624
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: fix error class-memaccess with GCC >= 8.1

From GCC 8.1 on GCC issues a warning when using memset et al on structs and
classes. With the way gem5 builds, this actually prevents successful
builds.

Instead of using a pointer with SCSIReply as type, we cast to a void
pointer to avoid the message. On the way we wrap the memset call into a
method of SCSIReply called reset for better code readability.

Signed-off-by: Maurice Becker <madnaurice@googlemail.com>
Change-Id: I3ed3fd9714be5d253aba01ca00b1863e1ae5cb68
Reviewed-on: https://gem5-review.googlesource.com/12685
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

Pl011: Added registers UART_RSR/UART_ECR

UART_RSR shows errors with the transmission and UART_ECR can clear
those (according to PL011 Technical Reference Manual Revision r1p4). As
these transmission errors never occur, they are implemented as RAZ/WI.

Both registers exist at the same offset 0x004. RSR is read-only, ECR is
write-only.

Signed-off-by: Maurice Becker <madnaurice@googlemail.com>
Change-Id: Ia9d13c90c65feccf3ecec36a782170755b1e1c02
Reviewed-on: https://gem5-review.googlesource.com/12686
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: fix build to missing Pl390 to Gicv2 rename

Change-Id: I6756f2c789aaca410d201aa64147443b66afee39
Reviewed-on: https://gem5-review.googlesource.com/12645
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

config, dev-arm: Fix UART handling baremetal mode

fs.py in baremetal mode currently fails for the VExpress_GEM5_V1 platform
due to inconsistent UART naming with error message:

AttributeError: object 'VExpress_GEM5_V1' has no attribute 'uart'

Consistently name keep all UARTs in the Arm platforms in a vector named
'uart' or as a single device named 'uart'. Update the configuration
scripts to reflect the fact that 'uart' can be a vector.

Change-Id: I20b8dbac794d6a9be19b6ce8c335a097872132fb
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12473
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: rename Pl390 to GicV2

The Pl390 model has evolved and acquired a lot of the features from GICv2,
which means that the name is no longer appropriate. Rename it to GICv2
since this is more representative of the supported features.

GICv2 is backwards compatible with the older Pl390, so we decided to
simply rename the class to represent both GICv2 and older interfaces such
as the instead of creating a new separate one.

Change-Id: I1c05fba8b3cb5841c66480e9f05b8c873eba3229
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12492
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: improve Pl390 parameters

Remove default dist_addr and cpu_addr register addresses since those are
purely platform specific.

Parametrize the cpu_size parameter. RealViewPBX has the Gic CPU and
distributor base too close for the newer CPU size of 0x2000, leading to
overlap.

This was introduced in I90a9f669a46a37d79c6cc542087cf91f2044f104 and makes
using RealViewPBX fail with:

fatal: system.membus has two ports responding within range
[0x1f000100 : 0x1f0020ff]:
system.realview.gic.pio
system.realview.gic.pio

Change-Id: Ic6c0e6b3d4705ff369eb739d54a1173a47819b7d
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12491
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Make GenericTimer use standard ArmInterruptPin

This patch is deleting the custom ArchTimer::Interrupt implementation in
favour of the standard ArmInterruptPin.

Change-Id: I5aa5661e48834398bd7aae15df9578b8db5c8da3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12402
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Factory SimObject for generating ArmInterruptPin

With this patch the python ArmInterruptPin SimObject matches to the
C++ ArmInterruptPinGen. The latter is in charge of generating
the ArmInterruptPin (which is not a SimObject anymore).
This is meant to ease the generation of ArmInterruptPins: by
not being SimObjects we are not forced to instantiate them
in the configuration script; we can generate them dynamically
instead throughout simulation.

Change-Id: I917d73a26168447221f5993c8ae975ee3771e3bf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12401
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: Add misc reg tracing to the generic timer

Change-Id: Ice9376b8eb42423679b0191910e8c980f8017f88
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12398

dev-arm: Create a getter for ArmInterruptPin ID number

A pin owner might want to know which is the irq number
associated with the pin.

Change-Id: I095393d4d25efe13eb2a75a0b0b055d386c2c126
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12298
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: Fix incorrect GIC address range sizes

The GICv2 specifies that 8KiB of the memory map is allocated to the
CPU interface and 4KiB is allocated to the distributor. The current
distributor size is off by 1 and the CPU interface is completely off
by a lot.

Change-Id: I90a9f669a46a37d79c6cc542087cf91f2044f104
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11769

dev, arm: accept and ignore writes to GIC APRn registers

Otherwise the Linux kernel v4.17 boot fails with error:

Tried to write Gic cpu at offset 0xd0

Change-Id: Ie8063212c9e2b29e2e4766801b4b9538e9eccbf8
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11590
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Use recurseDeviceTree instead of custom in platform

The platform code uses a custom mechanism to traverse the object
hierarchy when generating device trees. This is highly undesirable
since this breaks for common cases such as when SimObjects are stored
in a list.

Change-Id: I1b968e5fa1db62f1456e3c0ac3de47ab1299e58d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10781
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev-arm: Fix the address range for some I/O devices

Previously, many devices were incorrecty configured to respond to an
address range of size 0xfff. This changes fixes this and sets it to
0x1000.

Change-Id: I4b027a27adf60ceae4859e287d7f34443b398752
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11116
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Add new VExpress_GEM5_V1_Base Platform

Add a new VExpress_GEM5_V1_Base Platform which configures basic on
chip devices. The original VExpress_GEM5_V1 will inherit the Base and
add more on chip devices (currently only the HDLCD). This change will
make it possible to create variations of the base platform with
different devices.

Change-Id: I21f9bf4f6217d87e811ff777f630122593eef013
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10807
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev-arm: Remove deprecated GIC test interfaces

Change-Id: I4c5203b216387d9a4f041c7a00caea926e5cfca6
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10810

dev-arm: Add a VirtIO MMIO device to VExpress_GEM5_V1

Add an ARM-specific VirtIO MMIO device to the VExpress_GEM5_V1
platform.

Change-Id: Id1e75398e039aad9d637f46f653cda9084d3d2fe
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2327

dev-arm: Add a MMIO transport interface for VirtIO

The MMIO interface currently only supports a subset of version 0.9.5
of the VirtIO specification. It has the following known limitations:

* The queue size hint (the QUEUE_NUM register) is ignored.

* Queue alignment is assumed to be hard-coded to
VirtQueue::ALIGN_SIZE (4096 bytes).

* Only 4096 byte pages are currently supported.

Change-Id: Ifd318f5e5bddab0b6a42d8c8af9ff2fbb477f98b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev-arm: Add a GIC interrupt adaptor

Add GIC-based interrupt adaptor implementations that support PPI
(ArmPPI) and SPI (ArmSPI) delivery. In addition to being useful for
"normal" memory-mapped devices, the PPI adaptor makes it possible to
use the same device model to generate both PPIs and SPIs (e.g., the
PMU).

Change-Id: I73d6591c168040faef2443430c4f1da10c387a2a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2521
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev, arm: Add support for HYP & secure timers

Change-Id: I1a4849283f9bd5b1856e1378f7cefc33fc14eebd
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10023
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev, arm: Cleanup Pl050 interrupt handling

Add support for TX interrupts and cleanup existing RX interrupt
handling.

Change-Id: If2e5b0c0cc6fbeb2dce09e7e9d935647516b2c47
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9769

ps2: Unify constant names

Move ps2.hh to dev/ps2/types.hh and update the device models to
consistently use well-known constants from this header.

Change-Id: Iadfdc774495957beb82f3d341107b1e9232ffd4c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9770
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

dev, arm: Use the PS/2 framework in the Pl050 model

The Pl050 KMI model currently has its own keyboard and mouse
models. Use the generic PS/2 interface instead.

Change-Id: I6523d26f8e38bcc8ba399d4d1a131723645d36c7
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9767
Reviewed-by: Gabe Black <gabeblack@google.com>

dev: arm: SetScaling commands don't send parameter bytes.

These are single byte commands which change the mode of the mouse. They don't
take any additional parameters like the SetRate or SetResolution.

Change-Id: I29194916cfed5d3f4893947ef6d6cc636aee2419
Reviewed-on: https://gem5-review.googlesource.com/9701
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm, configs: Treat the bootloader rom as cacheable memory

Prior to this changeset the bootloader rom (instantiated as a
SimpleMemory) in ruby Arm systems was treated as an IO device and it
was fronted by a DMA controller. This changeset moves the bootloader
rom and adds it to the system as another memory with a dedicated
directory controller.

Change-Id: I094fed031cdef7f77a939d94f948d967b349b7e0
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8741
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arm: DT autogeneration - generate PCI node

Enables automatic generation of Device Trees for RealView PCI host
controllers. Note that some parts are more hard coded than you'd want,
but this is due to the limited understanding the PCI host has of its
configuration (i.e. it doesn't know all memory ranges). Fixing this,
for now at least, went beyond the scope and intentions of the
Device Tree generating code: use with care!

Change-Id: I2041871e0eb4d04fb5191257c47dd38649d1c0cc
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5967
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: DT autogeneration - Generate energy controller node

Adds Device Tree methods for the energy controller to allow for
DVFS simulations with automatically generated DTB files

Change-Id: Id8682f07dff1bbe63987e757faa0694e03ee86ab
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5966
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: DT autogeneration - autogenerate RealView Platform devices

Implements the Device Tree generating code for devices required by the
RealView VExpress_GEM5_V1 platform

Change-Id: I14244b2f3c028cbddba3c23ce7433fe3b301a0e8
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5965
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: make Arm GenericTimer a ClockedObject

Within a device tree, the GenericTimer device needs to point (via phandle)
to a clock domain which is itself also an object in the device tree. Within
gem5, clock domains are managed by making all clocked SimObjects inherit
from ClockedObject rather than SimObject.

Without this change, the GenericTimer is unable to generate the appropriate
clock domain phandle, and will crash during DTB autogeneration.

Change-Id: I6d3fb6362847c6a01720b2f14b3d595d1e59f01f
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4960
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

misc: Updates for gcc7.2 for x86

GCC 7.2 is much stricter than previous GCC versions. The following changes
are needed:

* There is now a warning if there is an implicit fallthrough between two
case statments. C++17 adds the [[fallthrough]]; declaration. However,
to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH.
M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and
if that doesn't exist, it defaults to nothing (no older compilers
generate warnings).
* The above resulted in a couple of bugs that were found. This is noted
in the review request on gerrit.
* throw() for dynamic exception specification is deprecated
* There were a couple of new uninitialized variable warnings
* Can no longer perform bitwise operations on a bool.
* Must now include <functional> for std::function
* Compiler bug for void* lambda. Changed to auto as work around. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878

Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/5802
Reviewed-by: Gabe Black <gabeblack@google.com>

sim: Implement load_addr_mask auto-calculation

Recent Linux kernels for AArch64 have changed their start addresses
but we still want to relocate the kernel to 0x80080000 which
required hacking the load_addr_mask in Realview.py to be 0x7ffffff
from 0xfffffff to mask off the proper number of MSBs to load the
kernel in the desired location. To avoid having to make this change
in the future again, we auto-calculate the load_addr_mask if it is
specified as 0x0 in the System sim-object to find the most restrictive
address mask instead of having the configuration specify it. If the
configuration does specify the address mask, we use it instead of
auto-calculating.

Change-Id: I18aabb5d09945c6e3e3819c9c8036ea24b6c35cf
Signed-off-by: Geoffrey Blake <Geoffrey.Blake@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2323
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

dev: Move generic serial devices to src/dev/serial

Change-Id: I104227fc460f8b561e7375b329a541c1fce881b2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4291
Reviewed-by: Gabe Black <gabeblack@google.com>

dev: Refactor UART->Terminal interface

The UART models currently assume that they are always wired to a
terminal. While true at the moment, this isn't necessarily a valid
assumption. This change introduces the SerialDevice class that defines
the interface for serial devices. Currently, Terminal is the only
class that implements this interface.

Change-Id: I74fefafbbaf5ac1ec0d4ec0b5a0f4b246fdad305
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4289
Reviewed-by: Gabe Black <gabeblack@google.com>

dev: Using Configurable image writer in HDLcd

The fixed image writer (which was dumping .bmp images only) has been
replaced by the configurable one in HDLcd device. Default format is
Auto, which gives gem5 the freedom to choose the format it prefers.

Change-Id: I0643266556bb10b43cdebd628f6daa2cd5e105dd
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5183
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

base: Introducing utility for writing raw data in png format

Originally it was possible to use a Bitmap writer class for dumping a
framebuffer snapshot in a .bmp file. This patch enables you to choose
another format. In particular it implements the writing of PNG Images
using libpng library. The latter has to be already installed in your
machine, otherwise gem5 will default to the Bitmap format. This
configurable writer has been introduced in the VNC frame dumping mechanism,
which is storing changed frame buffers from the VNC server

Change-Id: Id7e5763c82235f1ce90381c8486b85a7cce734ce
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5181
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

kvm, arm: Switch to the device EQ when accessing ISA devices

ISA devices typically run in the device event queue. Previously, we
assumed that devices would perform their own EQ migrations as
needed. This isn't ideal since it means we have different conventions
for IO devices and ISA devices. Switch to doing migrations in the KVM
CPU instead to make the behavior consistent.

Change-Id: I33b74480fb2126b0786dbdbfdcfa86083384250c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4288
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arm: Refactor some Event subclasses to lambdas

Change-Id: Ic59add8afee1d49633634272d9687a4b1558537e
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3929
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Add ID registers to the GIC model

Implement GICD_IIDR, GICC_IIDR, GICD_PIDR0, GICD_PIDR1, GICD_PIDR2,
and GICD_PIDR3.

Change-Id: I4f6b5a6303907226e7d8e2f677543b3868c02e7b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3961

dev-arm: Don't unconditionally overwrite bootloader params

The bootloader arguments were previously defaulting to a predetermined
value even if initialized elsewhere in the platform config script.
This commit fixes this issue by not calling the default initialization
routine if the bootloader is already defined.

Change-Id: Id80af4762b52dc036da29430b2795bb30970a349
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3967

kvm, arm: don't create interrupt events while saving GIC state

If an interrupt was pending according to Kvm state during a drain,
the Pl390 model would create an interrupt event that could not be
serviced, preventing the system from draining. The proper behavior
is for the Pl390 not actively being used for simulation to just skip
the GIC state machine that delivers interrupts.

Change-Id: Icb37e7e992f1fb441a9b3a26daa1bb5a6fe19228
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3661
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev,arm: add Kvm mode of operation for CP15 timer

The timer device exposed via the ARM ISA, also known as the
"CP15 timer" due to its legacy coprocessor encodings, is
implemented by the GenericTimerISA class. During Kvm
execution, however, this functionality is directly emulated
by the hardware.

This commit subclasses the GenericTimer, which is (solely)
used by GenericTimerISA, to facilitate Kvm in much the same
way as the prior GIC changes: the gem5 model is used as the
backing store for state, so checkpointing and CPU switching
work correctly, but isn't used during Kvm execution.

The added indirection prevents the timer device from creating
events when we're just updating its state, but not actually
using it for simulation.

Change-Id: I427540d11ccf049c334afe318f575146aa888672
Reviewed-on: https://gem5-review.googlesource.com/3542
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev,arm: remove and recreate timer events around drains

Having timer events stored in checkpoints complicates Kvm
execution. We change the timer behavior so that it always
deschedules any pending events on a drain() and recreates
them on a drainResume(), thus they will never appear in
checkpoints henceforth. This pattern of behavior makes
it simpler to handle Kvm execution, where the hardware
performs the timer function directly.

Change-Id: Ia218868c69350d96e923c640634d492b5c19cd3f
Reviewed-on: https://gem5-review.googlesource.com/3541
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Fix memleak in Pl390 by adding destructor

Change-Id: I3395e64311f6aa7bbfb6eee9bfec82e832bcbd4d
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3901
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Fix memleak in VGic by adding destructor

Change-Id: I864b5d9ed655cc52e440e2eb54987e8ff9a73296
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3900
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev: Replace EventWrapper use with EventFunctionWrapper

Change-Id: I6b03cc6f67e76dffb79940431711ae6171901c6a
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3748
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Replace EventWrapper use with EventFunctionWrapper

Change-Id: I08de5f72513645d1fe92bde99fa205dde897e951
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3747
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: ignore writes to the reset_ctl register

Change-Id: I953521572e6ace475b656369c9f07ddfa50d731a
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3263
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: add a9mpcore global timer device

Change-Id: I6d8a5e3795291b2a4cce022f555cf4b04f997538
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3262
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Refactor the VExpress_EMM system creation

Change-Id: Iac3d15719b2bbc426020a27d6b47a4baaab078c7
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2907
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

config: Adjust load_addr_mask in VExpress_GEM5_V1

Fix load_addr_mask in VExpress_GEM5_V1 in order to boot with the 64-bit
kernel.

Change-Id: I13a0a752c60e53262a245cb24b16606071041397
Reviewed-on: https://gem5-review.googlesource.com/3643
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: ignore writes to the SCU

Change-Id: I31808b6d7ca2bc2af41deaec747e3a13bd4f77d2
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3261
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm, dev: stub out GIC distributor interrupt groups

We don't implement the GICD_IGROUPRn registers, which is allowed, but
to be correct, they should be RAZ/WI (read as zero, writes ignored).

Change-Id: I8039baf72f45c0095f41e165b8e327c79b1ac082
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2620
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Enable m5ops by default for VExpress_GEM5_V1

Allocate 0x10010000-0x1001ffff for m5 pseudo-ops. This range is a part
of the CS5 address range in the RS1/RS2 memory map.

Change-Id: Ica45cd53bc4ebb62966afa099fa465e27fb0452c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2965

arm, kvm: implement GIC state transfer

This also allows checkpointing of a Kvm GIC via the Pl390 model.

Change-Id: Ic85d81cfefad630617491b732398f5e6a5f34c0b
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2444
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>

arm, dev: add basic support for GICC_BPR register

The Binary Point Register (BPR) specifies which bits belong to the
group priority field (which are used for preemption) and which to the
subpriority field (which are ignored for preemption).

Change-Id: If51e669d23b49047b69b82ab363dd01a936cc93b
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2443
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>

arm, dev: refactor GIC Pl390 GICD_ITARGETSRn handling

The aforementioned registers (Interrupt Processor Targets Registers) are
banked per-CPU, but are read-only. This patch eliminates the per-CPU
storage of these values that are simply computed.

Change-Id: I52cafc2f58e87dd54239a71326c01f4923544689
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2442
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>

arm: refactor packet processing in Pl390 GIC

Change-Id: I696703418506522ba90df5c2c4ca45c95a6efbea
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2441
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>

dev, arm: Fix multi-core KVM race in the generic timer

The generic timer sometimes needs to access global state. This can
lead to race conditions when simulating a multi-core KVM system where
each core lives in its own thread. In that case, the setMiscReg and
readMiscReg methods are called from the thread owning the CPU and not
the global device thread.

Change-Id: Ie3e982258648c8562cce0b30a0c122dfbfaf42cd
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2460
Reviewed-by: Weiping Liao <weipingliao@google.com>

arm: correct register read bug in Pl390 GIC

Change-Id: I4c0de7c2a5b40c1a9f009ca12062cb108b450b04
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

arm, dev: Add missing override in the Pl390 GIC model

The Pl390::getAddrRanges() method should have been flagged using the
override keyword. Other methods in this class already use the override
keyword, so this results in a warning about inconsistent override
usage when compiling using clang.

Change-Id: I17449687a8e074262232562487b58c96466bd54e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: Add draining to the GIC model

The GIC model currently adds a delay to interrupts when posting them
to a target CPU. This means that an interrupt signal will be
represented by an event for a short period of time. We currently
ignore this when draining and serialize the tick when the interrupt
will fire. Upon loading the checkpoint, the simulated GIC reschedules
the pending events. This behaviour is undesirable when we implement
support for switching between in-kernel GIC emulation and gem5 GIC
emulation. In that case, the (kernel) GIC model gets a lot simpler if
we don't need to worry about in-flight interrupts from the gem5 GIC.

This changeset adds a draining check to force the GIC into a state
where all interrupts have been delivered prior to checkpointing/CPU
switching. It also removes the now redundant serialization of
interrupt events.

Change-Id: I8b8b080aa291ca029a3a7bdd1777f1fcd5b01179
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2331
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arm: Clean up the GIC implementation

Lots of minor cleaups:
* Make cached params const
* Don't serialize params
* Use AddrRange to represent the distributor and CPU address spaces
* Store a const AddrRangeList of all PIO ranges

Change-Id: I40a17bc3a38868fb3b8af247790e852cf99ddf1d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2330
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

dev, arm: Render HDLCD frames at a fixed rate in KVM

Use the new fast scan-out API in the PixelPump to render frames at a
fixed frame rate in KVM mode. The refresh rate when running in KVM can
be controlled by the virt_refresh_rate parameter.

Change-Id: Ib3c78f174e3f8f4ca8a9b723c4e5d311a433b8aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2242
Reviewed-by: Rahul Thakur <rjthakur@google.com>

dev: Add support for single-pass scan out in the PixelPump

Add a helper function to scan out an entire frame in one time
step. This requires the public PixelPump to be changed somewhat to
separate timing updates from general PixelPump control. Instead of
calling PixelPump::start(timings), timings now need to be updated
using a separate call to PixelPump::updateTimings(timings) before
calling PixelPump::start().

Display controllers that don't need accurate timing (e.g., in KVM
mode), can use the new PixelPump::renderFrame() API to render an
entire frame in one step. This call results in the same callbacks
(e.g., calls to nextPixel()) as the timing calls, but they all happen
in immediately. Unlike the timing counterpart, renderFrame() doesn't
support buffer underruns and will panic if nextPixle() indicates an
underrun.

Change-Id: I76c84db04249b02d4207c5281d82aa693d0881be
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2241
Reviewed-by: Rahul Thakur <rjthakur@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arm, kmi: Clear interrupts in KMI devices

Added functionality to check and clear interrupts for KMI
devices. This fixes a boot bug when using KVM and in-kernel GIC
emulation.

Change-Id: Ia3e91d07567b7faf3f82b0adfda4a165a502a339
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2225
Reviewed-by: Rahul Thakur <rjthakur@google.com>

arm, kvm: Automatically use the MuxingKvmGic

Automatically use the MuxingKvmGic in the VExpress_GEM5_V1
platform. This removes the need to patch the host kernel or the
platform configuration when using KVM on ARM.

Change-Id: Ib1ed9b3b849b80c449ef1b62b83748f3f54ada26
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>

sim,kvm,arm: fix typos

Change-Id: Ifc65d42eebfd109c1c622c82c3c3b3e523819e85
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

style: [patch 3/22] reduce include dependencies in some headers

Used cppclean to help identify useless includes and removed them. This
involved erroneously included headers, but also cases where forward
declarations could have been used rather than a full include.

style: [patch 1/22] use /r/3648/ to reorganize includes

arm, dev: pl011 console interactivity

Improve PL011 console interactivity

Signed-off-by: Jason Lowe-Power <jason@lowepower.com>

dev, arm: Make GenericTimer param handling more robust

The generic timer needs a pointer to an ArmSystem to wire itself to the
system register handler. This was previously specified as an instance
of System that was later cast to ArmSystem. Make this more robust by
specifying it as an ArmSystem in the Python interface and add a check
to make sure that it is non-NULL.

Change-Id: I989455e666f4ea324df28124edbbadfd094b0d02
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>

arm: disable GIC extensions

Change-Id: If19b9c593b48ded1ea848f2d3710d4369ec8a221
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: Add a customizable NoMali GPU model

Add a customizable NoMali GPU model and an example Mali T760
configuration. Unlike the normal NoMali model (NoMaliGpu), the
NoMaliCustopmGpu model exposes all the important GPU ID registers to
Python. This makes it possible to implement custom GPU configurations
by without changing the underlying NoMali library.

Change-Id: I4fdba05844c3589893aa1a4c11dc376ec33d4e9e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>

arm, dev: Add support for listing DMA ports in new platforms

When using a Ruby memory system, the Ruby configuration scripts expect
to get a list of DMA ports to create the necessary DMA sequencers. Add
support in the utility functions that wire up devices to append DMA
ports to a list instead of connecting them to the IO bus. These
functions are currently only used by the VExpress_GEM5_V1 platform.

Change-Id: I46059e46b0f69e7be5f267e396811bd3caa3ed63
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Brad Beckmann <brad.beckmann@amd.com>

arm: Don't report the boot ROM as a memory in config tables

The boot ROM shouldn't be used as a memory by the kernel. Memories
have a flag to indicate this which is set for some platforms. Update
all platforms to consistently set this flag to indicate that the boot
ROM shouldn't be reported as normal memory.

Change-Id: I2bf0273e99d2a668e4e8d59f535c1910c745aa7b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Brad Beckmann <brad.beckmann@amd.com>

arm: s/ctx_id/ctx/ the GIC

Factored out of the larger banked register change.

Change-Id: I947dbdb9c00b4678bea9d4f77b913b7014208690
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

arm: bank GIC registers per CPU

Updated according to GICv2 documentation.

Change-Id: I5d926d1abf665eecc43ff0f7d6e561e1ee1c390a
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

stats: Fixing regStats function for some SimObjects

Fixing an issue with regStats not calling the parent class method
for most SimObjects in Gem5. This causes issues if one adds new
stats in the base class (since they are never initialized properly!).

Change-Id: Iebc5aa66f58816ef4295dc8e48a357558d76a77c
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: Add a flag to enable/disable gem5 GIC extensions

Make it possible to disable gem5 gic extensions by setting the
gem5_extensions param to False from Python.

Change-Id: Icb255105925ef49891d69cc9fe5cc55578ca066d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Geoffrey Blake <geoffrey.blake@arm.com>

arm, dev: Remove superfluous loop increment in flash device

As identified by clang-3.8, there was a superfluous loop increment in
the flash device which is now removed.

Change-Id: If46a1c4f72d3d4c9f219124030894ca433c790af
Reviewed-by: Rene De Jong <rene.dejong@arm.com>

arm,dev: PL011 UART_FR read status enhancement

Given we do not simulate a FIFO currently there are only two states
we can be in upon read: empty or full. Properly signal the latter.

Add and sort constants for states in the header file.

Committed by Jason Lowe-Power <power.jg@gmail.com>

dev, arm: Update GIC to use GICv2 register naming

The GICv2 has a new and slightly more consistent register
naming. Update gem5's GIC register names to match the new
documentation.

Change-Id: I8ef114eee8a95bf0b88b37c18a18e137be78675a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>

Revert to 74c1e6513bd0 (sim: Thermal support for Linux)

power: Add power states to ClockedObject

Add 4 power states to the ClockedObject, provides necessary access functions
to check and update the power state. Default power state is UNDEFINED, it is
responsibility of the respective simulation model to provide the startup state
and any other logic for state change.

Add number of transition stat.
Add distribution of time spent in clock gated state.
Add power state residency stat.

Add dump call back function to allow stats update of distribution and residency
stats.

sim: Thermal support for Linux

This patch enables Linux to read the temperature using hwmon infrastructure.
In order to use this in your gem5 you need to compile the kernel using the
following configs:

CONFIG_HWMON=y
CONFIG_SENSORS_VEXPRESS=y

And a proper dts file (containing an entry such as):

dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;

temp@0 {
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "DCC";
};
};

base: Add support for changing output directories

This changeset adds support for changing the simulator output
directory. This can be useful when the simulation goes through several
stages (e.g., a warming phase, a simulation phase, and a verification
phase) since it allows the output from each stage to be located in a
different directory. Relocation is done by calling core.setOutputDir()
from Python or simout.setOutputDirectory() from C++.

This change affects several parts of the design of the gem5's output
subsystem. First, files returned by an OutputDirectory instance (e.g.,
simout) are of the type OutputStream instead of a std::ostream. This
allows us to do some more book keeping and control re-opening of files
when the output directory is changed. Second, new subdirectories are
OutputDirectory instances, which should be used to create files in
that sub-directory.

Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
[sascha.bischoff@arm.com: Rebased patches onto a newer gem5 version]
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: Implement the NoMali reset callback

Add a callback handler for the NoMali reset callback. This callback is
called whenever the GPU is reset using the register interface or the
NoMali API. The callback can be used to override ID registers using
the raw register API.

dev, arm: Refactor the NoMali GPU

Refactor and cleanup the NoMaliGpu class:

* Use a std::map instead of a switch block to map the parameter enum
describing the GPU type to a NoMali type.

* Remove redundant NoMali handle from the interrupt callback.

* Make callbacks and API wrappers protected instead of private to
enable future extensions.

* Wrap remaining NoMali API calls.

style: fix missing spaces in control statements

Result of running 'hg m5style --skip-all --fix-control -a'.

dev, arm: Add a platform with support for both aarch32 and aarch64

Add a platform with support for both aarch32 and aarch64. This
platform implements a subset of the devices in a real Versatile
Express and extends it with some gem5-specific functionality. It is in
many ways similar to the old VExpress_EMM64 platform, but supports the
following new features:

* Automatic PCI interrupt assignment
* PCI interrupts allocated in a contiguous range.
* Automatic boot loader selection (32-bit / 64-bit)
* Cleaner memory map where gem5-specific devices live in CS5 which
isn't used by current Versatile Express platforms.
* No fake devices. Devices that were previously faked will be
removed from the device tree instead.
* Support for 510 GiB contiguous memory

dev, arm: Add support for automatic PCI interrupt routing

Add support for automatic PCI interrupt routing using a device's ID on
the PCI bus. Our current DTBs typically tell the kernel that we do
this or something similar when declaring the PCI controller. This
changeset adds an option to make the simulator behave in the same way.

Interrupt routing can be selected by setting the int_policy parameter
in the GenericArmPciHost. The following values are supported:

* ARM_PCI_INT_STATIC: Use the old static routing policy using the
interrupt line from a device's configurtion space.

* ARM_PCI_INT_DEV: Use device number on the PCI bus to map to an
interrupt in the GIC. The interrupt is computed as:

gic_int = int_base + (pci_dev % int_count)

* ARM_PCI_INT_PIN: Use device interrupt pin on the PCI bus to map to
an interrupt in the GIC. The PCI specification reserves pin ID 0
for devices without interrupts, the interrupt therefore computed
as:

gic_int = int_base + ((pin - 1) % int_count)

scons: Enable -Wextra by default

Make best use of the compiler, and enable -Wextra as well as
-Wall. There are a few issues that had to be resolved, but they are
all trivial.

dev: Move storage devices to src/dev/storage/

Move the IDE controller and the disk implementations to
src/dev/storage.

dev, arm: Add gem5 extensions to support more than 8 cores

Previous ARM-based simulations were limited to 8 cores due to
limitations in GICv2 and earlier. This changeset adds a set of
gem5-specific extensions that enable support for up to 256 cores.

When the gem5 extensions are enabled, the GIC uses CPU IDs instead of
a CPU bitmask in the GIC's register interface. To OS can enable the
extensions by setting bit 0x200 in ICDICTR.

This changeset is based on previous work by Matt Evans.

dev: Rewrite PCI host functionality

The gem5's current PCI host functionality is very ad hoc. The current
implementations require PCI devices to be hooked up to the
configuration space via a separate configuration port. Devices query
the platform to get their config-space address range. Un-mapped parts
of the config space are intercepted using the XBar's default port
mechanism and a magic catch-all device (PciConfigAll).

This changeset redesigns the PCI host functionality to improve code
reuse and make config-space and interrupt mapping more
transparent. Existing platform code has been updated to use the new
PCI host and configured to stay backwards compatible (i.e., no
guest-side visible changes). The current implementation does not
expose any new functionality, but it can easily be extended with
features such as automatic interrupt mapping.

PCI devices now register themselves with a PCI host controller. The
host controller interface is defined in the abstract base class
PciHost. Registration is done by PciHost::registerDevice() which takes
the device, its bus position (bus/dev/func tuple), and its interrupt
pin (INTA-INTC) as a parameter. The registration interface returns a
PciHost::DeviceInterface that the PCI device can use to query memory
mappings and signal interrupts.

The host device manages the entire PCI configuration space. Accesses
to devices decoded into the devices bus position and then forwarded to
the correct device.

Basic PCI host functionality is implemented in the GenericPciHost base
class. Most platforms can use this class as a basic PCI controller. It
provides the following functionality:

* Configurable configuration space decoding. The number of bits
dedicated to a device is a prameter, making it possible to support
both CAM, ECAM, and legacy mappings.

* Basic interrupt mapping using the interruptLine value from a
device's configuration space. This behavior is the same as in the
old implementation. More advanced controllers can override the
interrupt mapping method to dynamically assign host interrupts to
PCI devices.

* Simple (base + addr) remapping from the PCI bus's address space to
physical addresses for PIO, memory, and DMA.

dev, arm: Disable R/B swap in HDLCD by default

The HDLCD model implements a workaround that swaps the red and blue
channels. This works around an issue in certain old kernels. The new
driver doesn't seem to have this behavior, so disable the workaround
by default and enable it in the affected platforms.

dev, arm: Split MCC and DCC subsystems

Devices behind the Versatile Express configuration controllers are
currently all lumped into one SimObject. This will make DTB generation
challenging since the DTB assumes them to be in different parts of the
hierarchy. It also makes it hard to model other CoreTiles without also
replicating devices from the motherboard.

This changeset splits the VExpressCoreTileCtrl into two subsystems:
VExpressMCC for all motherboard-related devices and CoreTile2A15DCC
for Core Tile specific devices.

arm, dev: Fix flash model serialization code typos

The flash model has typos in its serialization code for
unknownPages, locationTable, blockValidEntries, and blockEmptyEntries
arrays where it would save each entry in the array under the same
name in the checkpoint. This patch fixes these typos.

dev, arm: Initialized the iccrpr register in the GIC

The IICRPR register in the GIC is currently not being initialized when
the GIC is instantiated. Initialize to the value mandated by the
architecture specification.

dev: Fix segfault in flash device

Fix a bug in which the flash device would write out of bounds and
could either trigger a segfault and corrupt the memory of other
objects. This was caused by using pageSize in the place of
pagesPerBlock when running the garbage collector.

Also, added an assert to flag this condition in the future.

dev: Fix draining for UFSHostDevice and FlashDevice

This patch fixes the drain logic for the UFSHostDevice and the
FlashDevice. In the case of the FlashDevice, the logic for CheckDrain
needed to be reversed, whilst in the case of the UFSHostDevice check
drain was never being called. In both cases the system would never
complete draining if the initial attampt to drain failed.

arm: Add missing explicit overrides for ARM devices

Make clang >= 3.5 happy when compiling build/ARM/gem5.opt on OSX.

misc: Remove redundant compiler-specific defines

This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap
(and similar) abstractions, as these are no longer needed with gcc 4.7
and clang 3.1 as minimum compiler versions.